Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

The fate of organoarsenic compounds in marine ecosystems

Microbial degradation experiments were performed with each standard arsenical [arsenobetaine, trimethylarsine oxide, dimethylarsinic acid, methanearsonic acid, inorganic arsenic(V) and inorganic arsenic(III)]. As typical origins for marine micro-organisms, sediments, macro-algae, mollusc intestine and suspended substances were used. The results were from these experiments led us to the following conclusions: (1) there is an arsenic cycle which begins with the methylation of inorganic arsenic on the route to arsenobetaine and terminates with the complete degradation of arsenobetaine to inorganic arsenic; (2) all the organoarsenic compounds which are derived from inorganic arsenic in seawater, through the food chains, have the fate that they, at least in part, finally return to the original inorganic arsenic.     

Arsenic Compounds Accumulated in Sedimentary Microorganisms Cultivated in Media Containing Several Arsenicals

Sediments, as sources of microorganisms, were added to two kinds of media, 1/5 ZoBell 2216E and a solution of inorganic salts, which contained inorganic arsenic(III), inorganic arsenic(V), methanearsonic acid, dimethyl- arsinic acid, trimethylarsine oxide, tetramethylarsonium salt or arsenocholine. After 17 days of incubation at 20 °C, the arsenicals that had accumulated in the microorganisms were analysed by high-performance liquid chromatography (HPLC). While the more toxic arsenicals [inorganic arsenic(III), inorganic arsenic(V), methanearsonic acid, dimethylarsinic acid] were not converted in the microorganisms, trimethylarsine oxide and tetramethylarsonium salt were considerably degraded to inorganic arsenic(V), and arsenocholine to arsenobetaine. Arsenobetaine that had accumulated in the microorganisms was extracted and confirmed by thin-layer chromatography (TLC) and fast atom bombardment (FAB) mass spectrometry.     

Effect of the chemical species of arsenic on sensitivity in graphite furnace atomic absorption spectrometry.

The sensitivity of graphite furnace atomic absorption spectrometry (GFAAS) to arsenobetaine (AB) was 1.3-times higher than to inorganic As. In order to understand the mechanism underlying this observation, the atomization processes for both chemical species were investigated in terms of the enthalpy change (DeltaH) during the atomization process in GFAAS. The enthalpy change of AB was slightly lower than that of inorganic As, which suggested that AB was atomized more efficiently than was inorganic As. Moreover, it was observed that some co-existing organic materials enhanced the analytical sensitivity of inorganic As. The sensitivity difference between inorganic As and AB depended upon the mechanisms of their atomization processes.     

Development of extraction methods for speciation analysis of selenium in aqueous extracts of medicinal plants

Advanced extraction methods have been developed for direct speciation of dissolved inorganic and organic selenium (Se) species in aqueous extracts of medicinal plants (MPs). The inorganic species of Se (SeIV and SeVI) were separated from organic forms by adsorbing inorganic Se on alumina, while the organic Se was not retained. The retained inorganic Se species was eluted with 10 mL 0.2 M HCl. The total inorganic Se species was determined after prereduction of SeVI into SeIV with concentrated HCl. The SeIV in the eluent and total inorganic Se species were then complexed with diethyldithiocarbamate. The resultant complexes were entrapped in the nonionic surfactant Triton X-114. The total Se, organic Se, total inorganic Se, and SeIV species were determined by electrothermal atomic absorption spectrometry with a modifier. The SeVI concentration was obtained by subtracting SeIV from total inorganic Se contents. The main factors affecting the methodologies were investigated in detail. Under the optimized experimental conditions, the LOD for SeIV was 50 microg/L. Among dissolved inorganic and organic Se species in aqueous extracts of MPs, organic Se species were present in the range of 74-84%, SeIV 3.62-7.47%, and SeVI 12.4-18.57% of total Se contents.     

Synthesis and characterization of organic–inorganic macrocyclic molecular brushes with poly(ε-caprolactone) side chains

In this work, we reported the synthesis of a dodecahydroxyl-functionalized macrocyclic oligomeric silsesquioxane (MOSS). The novel 24-membered hydroxyl-functionalized MOSS was employed as a macroinitiator for the ring-opening polymerization of ε-caprolactone (CL) and the organic–inorganic macrocyclic molecular brushes with poly(ε-caprolactone) (PCL) side chains were successfully synthesized. The organic–inorganic macrocyclic molecular brushes were characterized by means of nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). The results of wide angle X-ray diffraction (XRD) indicate that the architecture of the organic–inorganic macrocyclic molecular brushes did not alter the structure of PCL crystals. Differential scanning calorimetry (DSC) shows that the architecture of organic–inorganic macrocyclic molecular brushes significantly affected the rearrangement of PCL crystals. Compared to linear PCL, the organic–inorganic macrocyclic molecular brushes possessed the improved thermal stability in terms of the temperatures at the maximum of degradation rate and the yields of degradation residues.     

Effects of inorganic substances on water splitting in ion-exchange membranes; II. Optimal contents of inorganic substances in preparing bipolar membranes

An approach to enhancing the water-splitting performance of bipolar membranes (BPMs) is introducing an inorganic substance at the bipolar (BP) junction. In this study, the immobilization of inorganic matters (i.e., iron hydroxides and silicon compounds) at the BP junction and the optimum concentration have been investigated. To immobilize these inorganic matters, novel methods (i.e., electrodeposition of the iron hydroxide and processing of the sol-gel to introduce silicon groups at the BP junction) were suggested. At optimal concentrations, the immobilized inorganic matters significantly enhanced the water-splitting fluxes, indicating that they provide alternative paths for water dissociation, but on the other hand possibly reduce the polarization of water molecules between the sulfonic acid and quaternary ammonium groups at high contents. Consequently, the amount of inorganic substances introduced should be optimized to obtain the maximum water splitting in the BPM.     

Flexible inorganic–organic hybrids with dual inorganic components

Combining multiple inorganic components is an effective approach to improve the mechanical properties of inorganic–organic hybrid materials. The inorganic components can form interactions with the organic polymer matrix, and there is thus a need to understand the reinforcement mechanism under the optimal combination of organic polymer and inorganic particles. In this work, we prepared a series of dual inorganic particle–based titania/silica–poly(tetrahydrofuran)–poly(ε-caprolactone) (TiO₂/SiO₂–PTHF–PCL) hybrids by means of simultaneous cationic ring-opening polymerization and sol–gel reaction. In addition to constructing hybrid networks, the SiO₂ and TiO₂ components play important roles in multiple toughening mechanisms. The prepared dual inorganic hybrids feature enhanced thermal stability and mechanical properties when compared with the ones with a single inorganic component. The optimized mixing of such two inorganic components is identified through mechanical tests, revealing that the hybrid polymer₇₀/(Si_0.6Ti_0.4)₃₀ (70/18/12 mass ratio) has the highest compressive failure strain (80%) and compressive ultimate strength (1.3 MPa) as well as storage modulus (120 kPa), enabling elongation of up to 37% when compared with its original length. We thus find that the dual inorganic component approach is an effective strategy to enhance the mechanical properties of hybrid materials, suggesting potential applications as scaffolds for tissue engineering and soft robotics.     

Generation of AsH(3) from As(V) in the absence of KI as prereducing agent: Speciation of inorganic arsenic

It is shown that the potassium iodide to the samples to reduce As(V) to AS(III) is not essential when total inorganic arsenic is determined by molecular spectrophotometry (trapping AsH(3) in Ag-DDTC) or by atomic-absorption spectrometry (if Ar flow-rate and NaBH(4) addition rate are controlled in 6M hydrochloric acid medium). Furthermore, in the presence of low concentration of organic arsenic, a method is reported for the selective determination of inorganic As(III) and As(V), based on the use of citrate/citric acid medium to determine As(III) and hydrochloric acid to determine total inorganic As. As(V) is determined by the difference between total inorganic As and As(III). The interference level of organic arsenic species (monomethylarsenic acid and dimethylarsenic acid) in the determination of total inorganic arsenic and AS(III) in 6M hydrochloric acid and citrate/citric acid medium respectively, is reported in the text. The developed method is applied to determine As(III) and As(V) in spiked, tap and waste waters and in lake sediments.     

Organic–inorganic hybrid diblock copolymer composed of poly (ε‐caprolactone) and poly(MA POSS): Synthesis and its nanocomposites with epoxy resin

Organic–inorganic hybrid diblock copolymers composed of poly(ε‐caprolactone) and poly(MA POSS) [PCL‐b‐P(MA POSS)] were synthesized via reversible addition‐fragmentation chain transfer polymerization of 3‐methacryloxypropylheptaphenyl polyhedral oligomeric silsesquioxane (MA POSS) with dithiobenzoate‐terminated poly(ε‐caprolactone) as the macromolecular chain transfer agent. The dithiobenzoate‐terminated poly(ε‐caprolactone) (PCL‐CTA) was synthesized via the atom transfer radical reaction of 2‐bromopropionyl‐terminated PCL with bis(thiobenzoyl)disulfide in the presence of the complex of copper (I) bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine. The results of molecular weights and polydispersity indicate that the polymerizations were in a controlled fashion. The organic–inorganic diblock copolymer was incorporated into epoxy to afford the organic–inorganic nanocomposites. The nanostructures of the organic–inorganic composites were investigated by means of transmission electron microscopy and dynamic mechanical thermal analysis. Thermogravimetric analysis shows that the organic–inorganic nanocomposites displayed the increased yields of degradation residues compared to the control epoxy. In the organic–inorganic nanocomposites, the inorganic block [viz., P(MA POSS)] had a tendency to enrich at the surface of the materials and the dewettability of surface for the organic–inorganic nanocomposites were improved in terms of the measurement of surface contact angles. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Processing and Properties of Inorganic-Organic Hybrids Containing Various Inorganic Components

Inorganic-organic hybrids containing various inorganic components have been synthesized from silanol-terminated polydimethylsiloxane (PDMS) and three different inorganic components: Al(O-sec-C4H9)3, Ti(OC2H5)4 and Ta(OC2H5)5. The hybrids obtained were transparent and flexible. Dynamic mechanical measurements and stress-strain experiments were carried out in order to study the effect of inorganic component on the properties of the Metal-O-PDMS hybrids. The storage modulus at around room temperature increased in the order Al-O-PDMS, Ti-O-PDMS, Ta-O-PDMS hybrids, indicating that the three-dimensional network structure became denser in this order. The tensile strength increased in the order Al-O-PDMS, Ta-O-PDMS, Ti-O-PDMS hybrids. The difference in tensile strength is considered to be related to the strength of the interaction between the inorganic component and PDMS. The elongation at failure also depended on the inorganic component. Ti-O-PDMS hybrid exhibited the largest elongation of all the samples (more than 200%).     

Recent Progress in Organic–Inorganic Composite Solid Electrolytes for All-Solid-State Lithium Batteries

Conventional lithium-ion batteries, with flammable organic liquid electrolytes, have serious safety problems, which greatly limit their application. All-solid-state batteries (ASSBs) have received extensive attention from large-scale energy-storage fields, such as electric vehicles (EVs) and intelligent power grids, due to their benefits in safety, energy density, and thermostability. As the key component of ASSBs, solid electrolytes determine the properties of ASSBs. In past decades, various kinds of solid electrolytes, such as polymers and inorganic electrolytes, have been explored. Among these candidates, organic–inorganic composite solid electrolytes (CSEs) that integrate the advantages of these two different electrolytes have been regarded as promising electrolytes for high-performance ASSBs, and extensive studies have been carried out. Herein, recent progress in organic–inorganic CSEs is summarized in terms of the inorganic component, electrochemical performance, effects of the inorganic ceramic nanostructure, and ionic conducting mechanism. Finally, the main challenges and perspectives of organic–inorganic CSEs are highlighted for future development.     

麒麟菜提取物中的8种无机元素分析

应用原子吸收光谱法分析了麒麟菜提取物中的8种无机元素含量。结果显示,麒麟菜提取物中含有丰富的人体必需无机元素,宏量元素以Na的含量最高,微量元素以Fe的含量最高,8种无机元素中的含量由大到小顺序是:Na,K,Mg,Ca,Fe,Zn,Cu,Mn。     

Reaction kinetics and network characterization of UV-curing polyester acrylate inorganic/organic hybrids

Polyester acrylate inorganic/organic hybrids were prepared using a sol-gel precursor, coupling agent, and reactive diluent. The hybrids were cured via a UV-free radical initiator. Design of experiments (DOE) was utilized to investigate reaction kinetics and complex variable interactions. The effects of the silicate groups on the free radical photo-curing reaction kinetics were investigated utilizing a time-resolved Fourier transform infrared (FT-IR) spectroscopy and a differential scanning calorimeter equipped with a photocalorimetric accessory (photo-DSC). Microgel and inorganic network formation during the UV-initiated free radical crosslinking reactions was suggested to describe the complex gel-point behavior. It was proposed that the formation of the inorganic silicate groups retarded the organic crosslinking reactions. The UV-cured inorganic/organic hybrid films exhibited more homogeneous film morphology compared to the organic counterparts. In the hybrid films, a core-shell like inorganic/organic particle morphology was observed. The UV-crosslinked organic phase forms the core, whereas, the inorganic silicate forms the surrounding shell.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Multivariate optimisation of hydride generation procedures for single element determinations of As, Cd, Sb and Se in natural waters by electrothermal atomic absorption spectrometry

Continuous flow hydride generation procedures for As(III), total inorganic As, Cd, total inorganic Sb, Se(IV) and total inorganic Se from sea and hot-spring water samples were optimised by experimental designs. Ir-coated graphite tubes were used as preconcentration and atomisation medium of the hydrides generated. Several factors affecting the hydride generation efficiency were studied. Results obtained from Plackett-Burman designs suggest that sodium borohydride flow rate and reduction coil length, are significant factors for total inorganic arsenic hydride generation. For cadmium hydride generation the significant factors are hydrochloric acid concentration, hydrochloric acid and sodium borohydride flow rates and reduction coil length. For total inorganic antimony hydride generation the factors affecting the hydride generation procedure are hydrochloric acid and potassium iodide concentrations and reduction coil length; finally, pre-reduction coil length and oven temperature for the pre-reduction step are statistically significant factors for total inorganic selenium hydride generation. In addition, the factors studied for the arsenic and selenium hydride generation from As(III) and Se(IV) are not significant. From these studies, the significant variables were optimised by central composite designs. Validation carried out analysis on three reference materials: SLRS-4 (Riverie water), CASS-3 (seawater) and NIST-1643d.     

Speciation of mercury in human whole blood by capillary gas chromatography with a microwave-induced plasma emission detector system following complexometric extraction and butylation.

Methyl- and inorganic mercury were extracted from human whole blood samples, as their diethyldithiocarbamate complexes, into toluene and butylated by using a Grignard reagent. The mercury species were then separated by gas chromatography (on a 12 m non-polar DB-1 capillary column) and detected by a microwave-induced plasma atomic emission spectrometric (GC-MPD) system. The accuracy and precision of the proposed method were established by the analysis of Seronorm lyophilized human whole blood standards for methyl- and inorganic mercury. No statistical difference (t-test) between the sum of these two species determined by the GC-MPD based method and the recommended total mercury concentrations in the Seronorm samples was observed. Results for the determination of methyl- and inorganic mercury in 60 controls and 90 previously occupationally exposed (to inorganic mercury) workers are presented to illustrate the practical utility of the proposed method. No significantly elevated inorganic mercury concentrations between the two groups were evident.     

无机晶须材料的合成与应用

本文综述了无机晶须材料的合成与应用研究现状.近年来我国在这一研究领域取得了很大发展,以"硼酸铝晶须产业化"项目为代表的无机晶须材料的工业化生产,无疑将对我国高技术新材料的发展起极大的促进作用.本文还对几种典型的无机晶须材料--SiC晶须、Al18B4O33晶须、K2Ti6O13晶须、CaCO3晶须、Mg2B2O5晶须、莫来石晶须的合成与应用研究现状作了概述,并就其研究前景作了展望.     

Ordered nanostructured ceramic–metal composites through multifunctional block copolymer-metal nanoparticle self-assembly

A novel strategy for fabrication of ordered ceramic–metal nanocomposites was demonstrated by multifunctional block copolymer/metal nanoparticle self-assembly. Hybrid organic–inorganic block copolymer poly(3-methacryloxypropyl-T8-heptaisobutyl-polyhedral oligomeric silsesquioxane-block-N,N-dimethylaminoethyl methacrylate) was synthesized and used as a bi-functional structure directing agent for ligand-stabilized platinum nanoparticles to form ordered organic–inorganic nanocomposites with dense loading of inorganic species in both microphase separated domains. Subsequently, thin films of the hybrid material were converted to ordered silica (ceramic)–platinum (metal) nanocomposites via UV-assisted ozonolysis. This is the first time ordered ceramic–metal nanocomposites were achieved through a bottom-up approach, opening up opportunities for the design and synthesis of a broad range of ordered inorganic–inorganic nanocomposites.     

正常人与肝气郁结证人指甲中无机元素的比较分析

为探讨正常人与肝气郁结证指甲中特殊无机元素谱的差别,进而为人指甲的临床诊断及药效物质基础的探讨提供实验依据,采用扫描电子探针法测定了正常人与肝气郁结证患者指甲中炭化灰中无机元素。结果表明,正常人指甲炭化灰无机元素特征谱,有Ca和S两个呈正态分布趋势的特征性高峰;肝气郁结证指甲炭化无机元素特征谱只有一个Ca呈正态分布趋势的高峰。提示正常人与肝气郁结证具有不同的无机元素谱,肝气郁结证与体内无机元素发生代谢紊乱有关。