All-atom molecular dynamics analysis of kinetic and structural properties of ionic micellar solutions

All-atom molecular dynamics simulation results regarding aqueous sodium dodecyl sulfate (SDS) solutions have been presented. Both salt-free solutions with different SDS concentrations and those containing calcium chloride additives have been studied. The simulation has shown that surface-active SDS ions form stable premicellar aggregates. The obtained molecular dynamics trajectories have been used to describe both the kinetic and structural properties of solutions containing SDS molecular aggregates and the properties of individual aggregates. Aggregation kinetics has been investigated, and the characteristic sizes of the aggregates have been calculated by different methods. It has been found that the size of a premicellar aggregate with aggregation number n = 16 in a salt-free solution virtually does not depend on surfactant concentration. Radial distribution functions (RDFs) of hydrogen and oxygen atoms of water molecules relative to the center of mass of an aggregate have no local maxima near the aggregate surface; i.e., the surface is incompletely wetted with water. Corresponding RDFs of carbon atoms have one, two or three maxima depending on the surfactant concentration and the serial number of a carbon atom in the hydrocarbon radical of the surface- active ion. The study of the potentials of mean force for the interaction of sodium and calcium ions with an aggregate having aggregation number n = 32 shows that only calcium ions can be strongly bound to such an aggregate.     

Global study of myoglobin-surfactant interactions

Surfactants interact with proteins in multifarious ways which depend on surfactant concentration and structure. To obtain a global overview of this process, we have analyzed the interaction of horse myoglobin (Mb) with an anionic (SDS) and cationic (CTAC) surfactant, using both equilibrium titration techniques and stopped-flow kinetics. Binding and kinetics of conformational changes can be divided into a number of different regions (five below the cmc and one above) with very distinct features (broadly similar between the two surfactants, despite their difference in head group and chain length), which nuance the classical view of biphasic binding prior to micellization. In stage A, fairly weak interactions lead to a linear decrease in thermal stability. This gives way to a more cooperative process in stage B, where aggregates (presumably hemimicelles) start to form on the protein surface, leading to global denaturation (loss of a thermal transition) and biphasic unfolding kinetics. This is consolidated in stage C with titratable surfactant adsorption. Adsorption of this surfactant species leads to significant changes in kinetics, namely, inhibition of unfolding kinetics in CTAC and altered unfolding amplitudes in SDS, though the process is still biphasic in both surfactants. Stage D commences the reduction in exothermic binding signals, leading to further uptake of 5 (SDS) or 31 (CTAC) surfactant molecules without any major changes in protein conformation. In stage E many more surfactant molecules (46 SDS and 39 CTAC) are bound, presumably as quasi-micellar structures, and we observe a very slow unfolding phase in SDS, which disappears as we reach the cmc. Above the cmc, the unfolding rates remain essentially constant in SDS, but increase significantly in CTAC, possibly because binding of bulk micelles removes the inhibition by hemimicellar aggregates. Our work highlights the fascinating richness of conformational changes that proteins can undergo in the presence of molecules with self-assembling properties.     

Self-aggregation of the SDS surfactant at a solid-liquid interface

Molecular dynamics simulations of sodium dodecyl sulfate (SDS) molecules on a graphite surface are presented. The simulations were conducted at low and high surface coverage to study aggregation at the water/graphite interface. Results showed that at low surface coverage, the SDS molecules form hemicylindrical aggregates, in agreement with AFM experiments, whereas at high surface coverage, the surfactants form full cylinders. The latter aggregates have not been reported in systems of SDS on hydrophobic substrates, such as graphite. The unexpected results are explained in terms of a water layer adsorbed at the solid surface which was the responsible for the formation of these aggregates. Moreover, the SDS tails in the full cylindrical configuration became straighter than those of the hemicylindrical aggregate. Hydrogen bond formation between water and surfactant head groups was also studied, and it was found that they did not depend on the surfactant concentration.     

Surfactant and hydrocarbon aggregates on defective graphite surface: structure and dynamics

We have simulated the structure and aggregation kinetics of sodium dodecyl sulfate (SDS) and dodecane (C 12) on a graphite surface in the presence of point and line defects. We find that while vacancies do not affect the orientational bias of the molecules, they interfere with aggregate formation. Specifically, they disrupt the formation of extended aggregates. Line defects in the form of surface steps, on the other hand, tend to localize the aggregates in their vicinity and induce specific orientations along the step edges. We demonstrate that this orientational bias can be tuned by manipulating the terrace widths. These results suggest that extended defects could be employed to localize and orient surfactant aggregates on the basal plane of graphite, thus providing a means to create patterned aggregate domains.     

Sphere-to-rod transitions of nonionic surfactant micelles in aqueous solution modeled by molecular dynamics simulations

Control of the size and agglomeration of micellar systems is important for pharmaceutical applications such as drug delivery. Although shape-related transitions in surfactant solutions are studied experimentally, their molecular mechanisms are still not well understood. In this study, we use coarse-grained molecular dynamics simulations to describe micellar assemblies of pentaethylene glycol monododecyl ether (C(12)E(5)) in aqueous solution at different concentrations. The obtained size and aggregation numbers of the aggregates formed are in very good agreement with the available experimental data. Importantly, increase of the concentration leads to a second critical micelle concentration where a transition to rod-like aggregates is observed. This transition is quantified in terms of shape anisotropy, together with a detailed structural analysis of the micelles as a function of aggregation number.     

Physical properties of aqueous solutions of a thermo-responsive neutral copolymer and an anionic surfactant: turbidity and small-angle neutron scattering studies

Aqueous mixtures of the anionic sodium dodecyl sulfate (SDS) surfactant and thermo-responsive poly(N-vinylcaprolactam) chains grafted with omega-methoxy poly(ethylene oxide) undecyl alpha-methacrylate (PVCL-g-C11EO42) have been characterized using turbidimetry and small-angle neutron scattering (SANS). Turbidity measurements show that the addition of SDS to a dilute aqueous copolymer solution (1.0 wt %) induces an increase of the cloud point (CP) value and a decrease of the turbidity at high temperatures. In parallel, SANS results show a decrease of both the average distance between chains and the global size of the objects in solution at high temperatures as the SDS concentration is increased. Combination of these findings reveals that the presence of SDS in the PVCL-g-C11EO42 solutions (1.0 wt %) promotes the formation of smaller aggregates and, consequently, leads to a more homogeneous distribution of the chains in solution upon heating of the mixtures. Moreover, the SANS data results show that the internal structure of the formed aggregates becomes more swollen as the SDS concentration increases. On the other hand, the addition of moderate amounts of SDS (up to 4 mm) to a semidilute copolymer solution (5.0 wt %) gives rise to a more pronounced aggregation as the temperature rises; turbidity and SANS studies reveal in this case a decrease of the CP value and an increase of the scattered intensity at low q. The overall picture that emerges from this study is that the degree of aggregation can be accurately tuned by varying parameters such as the temperature, level of surfactant addition, and polymer concentration.     

Temperature‐Dependent Atomic Models of Detergent Micelles Refined against Small‐Angle X‐Ray Scattering Data

Surfactants have found a wide range of industrial and scientific applications. In particular, detergent micelles are used as lipid membrane mimics to solubilize membrane proteins for functional and structural characterization. However, an atomic‐level understanding of surfactants remains limited because many experiments provide only low‐resolution structural information on surfactant aggregates. In this work, small‐angle X‐ray scattering is combined with molecular dynamics simulations to derive fully atomic models of two maltoside micelles at temperatures between 10 °C and 70 °C. The micelles take the shape of general tri‐axial ellipsoids and decrease in size and aggregation number with increasing temperature. Density profiles of hydrophobic groups and water along the three principal axes reveal that the minor micelle axis closely mimics lipid membranes. The results suggest that coupling atomic simulations with low‐resolution data allows the structural characterization of surfactant aggregates.     

Interactions between Poly(ethylene Oxide) and Sodium Dodecyl Sulfate in Elongational Flows

This work investigates the elongational flow of aqueous solutions of mixtures of a high-molecular-weight poly(ethylene oxide) (PEO) and sodium dodecyl sulfate (SDS). The formation of micellar aggregates of SDS along the PEO chain results in an increase in the strength of the extension thickening of the PEO solutions. This is especially pronounced under conditions in which the PEO molecules form transient entanglements in the flow field. The minimum PEO concentration required to form intermolecular entanglements is substantially reduced in the presence of micellar aggregates. This effect becomes quantitatively less important in solutions with NaCl, which suggests PEO coil contraction due to electrostatic screening of micellar aggregates. However, once extension thickening starts in the presence of NaCl, the growth of pressure drop is more abrupt than without salt, which suggests stronger interactions between PEO coils with attached aggregates. The critical aggregation concentrations of PEO/SDS and PEO/SDS/NaCl solutions agree with those reported in the literature, which were obtained by means of different experimental techniques. However, the saturation of the surfactant effect is attained at lower surfactant concentrations than the polymer saturation point previously reported. This might reflect a low sensitivity of the extension thickening effect to the amount of surfactant bound to the polymerchain as the saturation point is approached. Copyright 2001 Academic Press.     

Temperature-induced intermicellization and contraction in aqueous mixtures of sodium dodecyl sulfate and an amphiphilic diblock copolymer

Aqueous solutions of a thermoresponsive amphiphilic diblock copolymer, containing poly(N-isopropylacrylamide), in the presence of the anionic sodium dodecyl sulfate (SDS) surfactant can undergo a temperature-induced transition from loose intermicellar clusters to collapsed core–shell nanostructures. The polymer–surfactant mixtures have been characterized with the aid of turbidity, small-angle neutron scattering (SANS), intensity light scattering (ILS), dynamic light scattering (DLS), shear viscosity, and rheo-small angle light scattering (rheo-SALS). In the absence of SDS, compressed intermicellar structures are formed at intermediate temperatures, and at higher temperatures further aggregation is detected. The SANS results disclose a structure peak in the scattered intensity profile at the highest measured temperature. This peak is ascribed to the formation of ordered structures (crystallites). In the presence of a low amount of SDS, a strong collapse of the intermicellar clusters is observed at moderate temperatures, and only a slight renewed interpolymer association is found at higher temperatures because of repulsive electrostatic interactions. Finally, at moderate surfactant concentrations, temperature-induced loose intermicellar clusters are detected but no shrinking was registered in the considered temperature range. At a high level of SDS addition, large polymer–surfactant complexes appear at low temperatures, and these species are compressed at elevated temperatures. The rheo-SALS results show that the transition structures are rather fragile under the influence of shear flow.     

Cosurfactant and cosolvent effects on surfactant self-assembly in supercritical carbon dioxide

The impact of alcohol additives on the self-assembly of surfactants in supercritical carbon dioxide is investigated using lattice Monte Carlo simulations. We observe that all studied (model) alcohols reduce the critical micelle concentration. The reduction is stronger the longer the hydrocarbon chain of the alcohol, and the higher the alcohol concentration. Short-chain alcohols are found to concentrate in the surfactant layer of the aggregates, replacing surfactant molecules and leading to a strong decrease of the aggregation number and a large increase of the number of aggregates. On the other hand, only a small number of alcohol molecules with longer chain length are found in the aggregates, leading to a slight increase in the aggregation number. However, structural properties such as size and density profiles of aggregates at the same aggregation number are not influenced markedly. Consequently, short-chain alcohols act as cosurfactants, directly influencing the properties of the aggregates, while alcohols with longer hydrocarbon chains work as cosolvents, altering the properties of the solvent. However, the transition between both extremes is gradual.     

Binding of sodium dodecyl sulfate and hexaethylene glycol mono-n-dodecyl ether to the block copolymer L64: electromotive force, microcalorimetry, surface tension, and small angle neutron scattering investigations of mixed micelles and polymer/micellar surfactant complexes

The interactions of sodium dodecyl sulfate (SDS) with the triblock copolymer L64 (EO13-PO30-EO13) and hexaethylene glycol mono-n-dodecyl ether (C12EO6) were studied using electromotive force, isothermal titration microcalorimetry, differential scanning microcalorimetry, and surface tension measurements. In certain regions of binding, mixed micelles are formed, and here we could evaluate an interaction parameter using regular solution theory. The mixed micelles of L64 with both SDS and C12EO6 exhibit synergy. When L64 is present in its nonassociated state, it forms polymer/micellar SDS complexes at SDS concentrations above the critical aggregation concentration (cac). The cac is well below the critical micellar concentration (cmc) of pure SDS, and a model suggesting how bound micelles are formed at the cac in the presence of a polymer is described. The interaction of nonassociated L64 with C12EO6 is a very rare example of strong binding between a nonionic surfactant and a nonionic polymer, and C12EO6/L64 mixed micelles are formed. We also carried out small angle neutron scattering measurement to determine the structure of the monomeric polymer/micellar SDS complex, as well as the mixed L64/C12EO6 aggregates. In these experiments, contrast matching was achieved by using the h and d forms of SDS, as well as C12EO6. During the early stages of the formation of polymer-bound SDS micelles, SDS aggregates with aggregation numbers of approximately 20 were found and such complexes contain 4-6 bound L64 monomers. The L64/C12EO6 data confirmed the existence of mixed micelles, and structural information involving the composition of the mixed micelle and the aggregation numbers were evaluated.     

Micellization of Sodium Dodecyl Sulfate in Glycerol Aqueous Mixtures

The effect of glycerol on both micellar formation and the structural evolution of the sodium dodecyl sulfate (SDS) aggregates in the context of the action mechanism of the cosolvent has been studied. The critical micelle concentration and the degree of counterion dissociation of the surfactant over a temperature range from 20°C to 40°C were obtained by the conductance method. The thermodynamic parameters of micellization were estimated by using the equilibrium model of micelle formation. The analysis of these parameters indicated that the lower aggregation of the surfactant is mainly due to a minor cohesive energy of the mixed solvent system in relation to the pure water. The effect of glycerol on the mean aggregation number of the micelles of SDS was analyzed by the static quenching method. It was found that the aggregation number decreased with the glycerol content. This reduction in the micellar size seems to be controlled by an increase in the surface area per headgroup, which was ascribed to a participation of glycerol in the micellar solvation layer. Studies on the micropolarity of the aggregates, as sensed by the probe pyrene, indicated that this microenvironmental parameter is almost unaffected by the presence of glycerol in the mixture. However, an increase in the micellar microviscosity at the surface region was observed from the photophysical behavior of two different probes, rhodamine B and auramine O. These results suggest a certain interaction of the cosolvent in the micellar solvation of SDS micelles.     

Giant vesicles of a single-tailed chiral cationic surfactant, (1R,2S)-(-)-N-dodecyl-N-methylephedrinium bromide, in water

Self-assembly properties of a single-tailed chiral cationic surfactant, (1R,2S)-(-)-N-dodecyl-N-methylephedrinium bromide (DMEB), have been studied in water. The molecular self-assemblies of the amphiphile have been characterized by surface tension, fluorescence probes, light scattering, and microscopic techniques. The results have been compared with those of dodecyltrimethylammonium bromide (DTAB) surfactant. The critical aggregation concentration of DMEB was found to be much less than that of DTAB. Surface tension and fluorescence probe studies have suggested formation of micellar structures at low temperature (<28 degrees C) and spontaneous formation of giant vesicles in water above 28 degrees C. The mean size of the aggregates has been measured by a dynamic light scattering method. The micropolarity and microviscosity of the self-assemblies were determined by fluorescence probe technique. The (1)H NMR and FTIR spectra were recorded to elucidate the role of the hydrophobic head group towards the formation of bilayer structures. The phase transition temperatures of the vesicular aggregates were determined by measurement of fluorescence anisotropy at various temperatures.     

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: a conductometric study

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.     

阴离子表面活性剂与非离子水溶性大分子二元体系的临界类胶束聚集数

将对应于γ～lgc双拐点体系第一拐点c₁的N₁定义为第一临界类胶束聚集数[N₁]₁.实验结果表明,[N₁]₁是依赖于表面活性剂结构以及大分子结构的不变量或结构本征值,不随大分子分子量和大分子浓度变化而改变.     

Adsorption of Cationic Laser Dye onto Polymer/Surfactant Complex Film

Fabrication of complex molecular films of organic materials is one of the most important issues in modern nanoscience and nanotechnology. Soft materials with flexible properties have been given much attention and can be obtained through bottom up processing from functional molecules, where self-assembly based on supramolecular chemistry and designed assembly have become crucial processes and technologies. In this work, we report the successful incorporation of cationic laser dye rhodamine 6G abbreviated as R6G into the pre-assembled polyelectrolyte/surfactant complex film onto quartz substrate by electrostatic adsorption technique. Poly(allylamine hydrochloride) (PAH) was used as polycation and sodium dodecyl sulphate (SDS) was used as anionic surfactant. UV-Vis absorption spec-troscopic characterization reveals the formation of only H-type aggregates of R6G in their aqueous solution and both H- and J-type aggregates in PAH/SDS/R6G complex layer-by-layber films as well as the adsorption kinetics of R6G onto the complex films. The ratio of the absorbance intensity of two aggregated bands in PAH/SDS/R6G complex films is merely independent of the concentration range of the SDS solution used to fabricate PAH/SDS com-plex self-assembled films. Atomic force microscopy reveals the formation of R6G aggregates in PAH/SDS/R6G complex films.     

Crystallization and aggregation behaviors of calcium carbonate in the presence of poly(vinylpyrrolidone) and sodium dodecyl sulfate

An anionic surfactant interacts strongly with a polymer molecule to form a self-assembled structure, due to the attractive force of the hydrophobic association and electrostatic repulsion. In this crystallization medium, the surfactant-stabilized inorganic particles adsorbed on the polymer chains, as well as the bridging effect of polymer molecules, controlled the aggregation behavior of colloidal particles. In this presentation, the spontaneous precipitation of calcium carbonate (CaCO3) was conducted from the aqueous systems containing a water-soluble polymer (poly(vinylpyrrolidone), PVP) and an anionic surfactant (sodium dodecyl sulfate, SDS). When the SDS concentrations were lower than the onset of interaction between PVP and SDS, the precipitated CaCO3 crystals were typically hexahedron-shaped calcite; the increasing SDS concentration caused the morphologies of CaCO3 aggregates to change from the flower-shaped calcite to hollow spherical calcite, then to solid spherical vaterite. These results indicate that the self-organized configurations of the polymer/surfactant supramolecules dominate the morphologies of CaCO3 aggregates, implying that this simple and versatile method expands the morphological investigation of the mineralization process.     

Effect of SDS on the gelation of hydroxypropylmethylcellulose hydrogels

Thermal behavior of aqueous hydroxypropylmethylcellulose (HPMC)/surfactant mixtures was studied in the dilute concentration regime using micro-differential scanning calorimetry (DSC). The surfactant used was sodium n-dodecyl sulfate (SDS). The heat capacity of HPMC gel with various concentrations of SDS was much higher than that of the pure HPMC gel. The addition of SDS at different concentrations showed dissimilar influences on the gelation of HPMC; SDS at lower concentrations (≤6 mM) did not affect gelation temperature significantly except for enhancing the heat capacity whilst SDS at higher concentrations (≥6 mM) not only resulted in the gelation of HPMC at higher temperatures but also changed the pattern of the gelation thermograph from a single mode to a bimodal. On the basis of the observed thermal behavior of HPMC/SDS systems, the mechanism behind the sol-gel transition was discussed in terms of the properties of the surfactant and their influences on the extent of polymer/surfactant binding and polymer/polymer hydrophobic association. Gelation kinetics was analysed using the results from the DSC measurements. The kinetic parameters were determined.     

Photophysical Behavior of a New Gemini Surfactant in Neat Solvents and in Micellar Environments

A novel fluorescent gemini surfactant, 1,4-bis-(2'-(N-dodecyl pyridinio-4"-yl)ethenyl)benzene dibromide, abbreviated BDPEBB, has been synthesized and its photophysical properties have been studied in different environments. BDPEBB has a limited solubility in alcohols where it is found in aggregate form at concentrations>/=1 mM. In other solvents, e.g., water, it is only found in aggregate form, even at much lower concentrations. Solvent polarity has a small and insignificant solvatochromic effect but alcohols give a specific interaction with BDPEBB, causing a significant hypsochromic shift in absorption maxima and a large increase in relative fluorescence efficiency. Pyrene fluorescence is effectively quenched by BDPEBB. Pyrene also forms associative complexes with BDPEBB in water. These complexes are partly dissociated in the presence of surfactant micelles. Triton X-100 micelles provide a favorable environment for BDPEBB solubilization well distinguished from the behavior of ionic surfactants. Small quantities of BDPEBB have a large influence on the behavior of aqueous sodium dodecylsulfate (SDS) and sodium decylsulfate (SDeS) micelles, inducing the formation of large aggregates, visible by the naked eye. These large aggregates are most probably microcrystals of BDPEBB(2+)/2DS(-) or BDPEBB(2+)/2DeS(-). The aggregation number of SDS and SDeS micelles in the absence and in the presence of BDPEBB has been calculated by exploitation of the static luminescence quenching kinetics of Ru(bpy)(3)(2+) by 9-methylanthracene, both solubilized in the micellar phase. It has been observed that Ru(bpy)(3)(2+) inhibits the precipitation of SDeS micelles in the presence of BDPEBB. Our results suggest that double-chain surfactant chromophores should be employed with particular care if they are to be used as probes of the micellar phase. Copyright 2000 Academic Press.     

Novel fluorescent probe as aggregation predictor and micro-polarity reporter for micelles and mixed micelles

Aggregational behaviour of micelles sodium dodecyl sulphate (SDS and Triton X-100, TX-100 both in pure and mixed form) and micelle like aggregates such as polymer-surfactant system [polymer poly(vinyl pyrrolidone), PVP]-SDS have been studied by using fluorescence characteristics of a newly synthesized probe. The critical micelle concentration (CMC) values determined at various surfactant compositions are lower than the ideal values indicating a synergistic effect. The value of the interaction parameter for the surfactant mixture has been determined which agrees well with the value calculated according to molecular thermodynamic theory. The total aggregation number of surfactant in mixed micelle shows a drastic variation in the SDS mole fraction range 0 < or = alpha1 < or = 0.3 and beyond the range it remains practically constant. Molar-based partition coefficients for the dye between the micellar and aqueous phase have been determined and a non-linear variation is obtained for the mixed micellar system. Variations of micro-polarity in the mixed micellar region have been investigated as a function of surfactant composition and results have been explained in terms of a suitable realistic model.