基于旋转、平移和尺度不变的平稳小波图像增强

针对传统的离散正交小波变换对信号的起始位置比较敏感的特点,提出了具有旋转、平移和尺度不变的平稳小波变换,将图像变换到极坐标,采用方向能量函数确定图像主轴方位,并将图像主轴旋转到水平方向得到方向归一化的图像。然后通过对图像的重整和小波基的位移、伸缩、旋转,来消除位移和尺度的影响,得到具有旋转、平移和尺度不变的平稳小波变换。结合非线性增强算子以及Otsu自适应最优阈值估计方法,对图像进行增强。实验结果表明,提出的方法能够在增强图像的同时很好地保留图像的边缘信息,是一种有效的图像增强方法。     

CBERS-02B星HR相机内方位元的在轨标定方法

遥感相机内方位元素的在轨标定对遥感图像的定位和测量具有重要意义.利用线阵推扫传感器构像模型,提出了一种对CBERS-02B星HR相机内方位元素进行在轨标定的方法.该方法以内方位元素和姿态角为未知参数,建立地面控制点和相应像点的共线方程组,通过解算共线方程组获得内方位元素.实验证明,用该方法对内方位元素进行在轨标定,具有...     

TDI CCD立体相机内方位元素测试技术研究

依据星载单镜头TDICCD立体相机立体成像及测绘要求,结合普通测绘相机内方位元素,提出了星载单镜头立体相机内方位元素由焦距、主点位置、立体成像角(前后视交角)、图像畸变等元素组成。给出了立体相机内方位元素测试的方法,针对立体相机成像特点给出了计算内方位元素的算法,对其进行了实际测量和验证,其测量结果符合设计要求。     

Orientation Effects in the Evaluation of Populations of Irregularly Shaped Particles by Image Analysis

Three different powders were studied by image analysis. Shadow casting was used to generate information on particle orientation. It was discovered that orientation effects can distort the data generated in size characterization studies and as a consequence of these studies it is suggested that, in any image analysis study intended to be used to generate reference data, shadow casting‐orientation studies should be carried out to specify the orientation of the fineparticles.     

A 3D non-linear orientation prediction wavelet transform for interference hyperspectral images compression

According to the characteristic of large aperture static interference imaging spectrometer (LASIS), a non-linear orientation prediction three-dimensional (3D) wavelet transform method is proposed in this paper on the basis of the 3D orientation prediction wavelet transform method proposed by Li, Ma and Wu in 2008 [1]. The method proposed in this paper still combines directional prediction into 3D lifting wavelet transformation, but compared with the 3D orientation prediction wavelet transform method, it made a breakthrough in the limitation that the orientation predicted must be a straight linear direction. The experimental results showed that this method improved the performance of wavelet obviously, especially on the LASIS image with quite severe and unstable directional characteristic as seen in the study of Ma and Ma (2009) [2]. Meanwhile, the characteristic of spectrum image recovered by the proposed method also possessed better performance.     

Curvelet结合图像方向离散度的DSPI无损检测缺陷边缘提取

边缘提取是DSPI无损检测缺陷自动识别的基础。根据人类视觉识别的特点,提出以Curvelet多尺度几何分析为基础进行缺陷图像的边缘提取,为了对DSPI检测过程中因光照不足等原因产生的伪缺陷进行分辨,基于矢量积定义了图像的方向离散度,并与Curvelet多尺度分析方法相结合,在橡胶复合材料DSPI无损检测中进行应用。     

Simulation study of ghost image phenomenon induced by contrast enhancement film in plasma display panels

We have performed simulations of the ghost image phenomenon induced by a contrast enhancement film used for plasma display panels (PDPs). An optical imaging system was designed in order to investigate the ghost image qualitatively and quantitatively. We report on and discuss the effects of the material parameters and film orientation on the relative illuminance of the ghost image for a conventional louver-type contrast enhancement film adopting a trapezoidal black-stripe structure. The ghost image phenomenon is strongly affected by the film orientation relative to the PDP module and the difference between the refractive index of the ultraviolet curable urethane acrylate layer and that of the black stripes. We show that when the top side of the black stripes faces the PDP module and the refractive index difference is small, the ghost image phenomenon is weakened.     

基于光学图像的目标姿态判读处理

 采用摄像测量方法获取目标的飞行姿态是目前靶场主要测量手段之一。目标姿态可以用目标轴线在空间的方位来描述,即姿态的判读处理就是要提取线的空间位置。在进行图像判读处理时除采用传统的基于点的判读处理手段外,还应根据不同的目标类型采用不同的判读处理方法,文中给出了基于首尾两点的判读处理、基于线的判读处理和基于模型的三种判读处理方法,有效解决了不同类型目标的判读处理问题。     

Polarization properties of phase gratings recorded in a Bi12SiO20 crystal

Due to the co-existence of optical activity and linear birefringence in a Bi₁₂SiO₂₀ crystal, a phase gratting induced in this medium has many interesting and unusual properties. We study the ellipticity and orientation of the directly transmitted and diffracted beams as a function of the read-beam vector orientation. In image processing experiments the signal to noise ratio can be increased significantly by appropriately choosing the read-beam orientation such that the strong direct beam is linearly polarized and can be eliminated with the help of a polarizer.     

The determination of positions and orientations of a prism’s surfaces based on image orientation change

Optical prisms are commonly employed because of their ability to output an image with a certain orientation and redirect and relocate the emergent beam of light in a given manner. Consequently, in order to design a prism that fulfills the above purposes, the following problem must be solved: how can the pose matrices, which define the positions and orientations of the prism’s boundary surfaces, be determined so as to produce the required image orientation change (IOC)? Previous papers presented a methodology to determine the unit normal vectors of a prism’s boundary surfaces for a given IOC. In this paper, a parameter L, referred to as image offset, is used to characterize the length of the common normal segment between the entrance chief ray and its exit chief ray for a prism. The methodology to determine the pose matrices of a prism’s boundary surfaces with a given image offset L is addressed. Further, the conditions for which a circular bundle of entrance rays can pass through a prism without being blocked by the prism’s boundary surfaces are also discussed. Two illustrative examples are given to demonstrate the proposed approaches.     

Fingerprint image enhancement using multi-scale DDFB based diffusion filters and modified Hong filters

The main task of a fingerprint image enhancement is to enhance the image in such a way that it not only remove the noise but also enhance the reliable minutiae points. For this purpose, in this paper we propose a multi-scale decimation-free directional filter bank method for reliable orientation estimation. This reliable orientation is used in coherence enhancement diffusion and in Gabor filter based enhancement, which overcomes the drawbacks of these two methods. Experimental results show that the proposed method not only enhances the images but also facilitates the minutiae algorithm, by enhancing the true minutiae points.     

电泳法制备ZnO/YBCO异质结及电学性质研究

采用电泳方法及高温煅烧工艺制备ZnO/YBCO异质结,XRD图谱显示ZnO具有c轴方向的择优取向。在SEM的截面图中可观察到ZnO与YBCO结合致密,放大500倍的表面形貌图呈现织构(textured)的微结构特征,放大5000倍的表面形貌图中可观察微米量级的六方晶粒。通过对ZnO/YBCO异质结的电学性质进行测试,结果显示整流特性。     

A new multi-spectral feature level image fusion method for human interpretation

Various different methods to perform multi-spectral image fusion have been suggested, mostly on the pixel level. However, the jury is still out on the benefits of a fused image compared to its source images. We present here a new multi-spectral image fusion method, multi-spectral segmentation fusion (MSSF), which uses a feature level processing paradigm. To test our method, we compared human observer performance in a three-task experiment using MSSF against two established methods: averaging and principle components analysis (PCA), and against its two source bands, visible and infrared. The three tasks that we studied were: (1) simple target detection, (2) spatial orientation, and (3) camouflaged target detection. MSSF proved superior to the other fusion methods in all three tests; MSSF also outperformed the source images in the spatial orientation and camouflaged target detection tasks. Based on these findings, current speculation about the circumstances in which multi-spectral image fusion in general and specific fusion methods in particular would be superior to using the original image sources can be further addressed.     

Two-Photon Induced Anisotropy of Azobenzene Polymer Liquid Crystals Excited by a 532nm Laser

Polymer liquid crystals (PLC) with azobenzene moieties are promising materials for optical switching and image storage because the orientation of mesogens in thin films of this material may be modified by light.     

A crystallographic orientation transition and early stage growth characteristics of thin Bi films on HOPG

We report on the growth of ultra-thin bismuth films on the basal plane of highly ordered pyrolitic graphite (HOPG) substrates. Scanning electron microscopy and atomic force microscopy have been used to characterize the morphology, and the crystallographic orientation was obtained using electron back scatter diffraction. Low coverage films are comprised of islands with a striped surface morphology, and show the orientation relationship with preferred in-plane orientations . With increasing film thickness, we identify an unusual orientation transformation to the commonly found Bi{0 0 0 1} (trigonal) orientation.     

Multiple Polarization Encoding for Gray Image Encryption Based on Liquid Crystal Exclusive OR Logic

This work proposes and demonstrates the feasibility of gray image encryption using multiple polarization encoding, in which the cascaded twisted nematic liquid crystal devices sandwiched between a crossed polarizer pair are used to implement exclusive OR (XOR) logical encryption and decryption. The polarization encoding scheme provides a multichannel XOR logic operation to secure bit-plane images derived from a gray image, according to the adiabatic following properties of twisted nematic liquid crystal devices. Experimental data reveal that the multiple polarization encoding schemes for gray image encryption and decryption are performed with acceptable image quality by selecting appropriate polarization orientation and modulation conditions. Both analytic and experimental results are presented and discussed.     

Tomographic Imaging of Collagen Fiber Orientation in Human Tissue Using Depth-Resolved Polarimetry of Second-Harmonic-Generation Light

We propose a nonlinear optical probe method to image the distribution of collagen fiber orientation in human tissue by measuring the polarization of collagen-induced second-harmonic-generation (SHG) light (SHG polarimetry). Depth-resolved SHG polarimetry, with a depth resolution of 14 μm, was used to evaluate the cross-sectional profile of collagen fiber orientation in Achilles tendon and dentin, revealing a characteristic distribution of collagen orientation along the depth direction. We evaluated the two-dimensional (2D) lateral distribution of collagen fiber orientation in back reticular dermis and anklebone by polarization-resolved SHG imaging, and confirmed an appreciable difference in the distribution profiles of the two samples. We further extended the method to a depth-resolved measurement of the three-dimensional (3D) distribution of collagen orientation in anklebone. The proposed system promises to be a powerful tool for in vivo measurement of collagen fiber orientation in human tissue.     

基于坐标转换的数字天顶仪定向方法

为了提高仪器的工作效率,在数字天顶仪定位的基础上开展了定向方法的研究,构建了识别星点的坐标转换模型.从坐标转换模型出发,分析了仪器倾斜及光轴倾斜等因素对恒星像点图像坐标的影响,研究了焦距值及光轴指向的天文坐标对恒星理论坐标的影响,并在坐标转换的基础上建立了定向模型.试验结果表明,单组星图的定向精度均在5″以内,定向精度较高,能够满足实际条件下对定向精度的要求.     

数字散斑相关方法实现鼠标定位原理

在激光鼠标工作原理的基础上,利用数字散斑相关方法对激光鼠标的定位原理进行了研究。设计实验得到散斑场并用数码相机拍摄。用图像采集卡采集CCD扫描数散斑图像得到的图像,将图像数字化,分析数据得到了图像最优采样的像素单元和图像位移两个参量。基于两个参量,实验采集散斑图像在一定的轨迹运动下的散斑场,用Matlab软件模拟,并比较分析了实验和模拟结果。结果表明,用数字散斑相关方法可以实现激光鼠标的定位功能,并且分辨力可达到1μm,远高于市场上激光鼠标30μm的分辨力。