Preparation of a K+‐imprinted polymer for the selective recognition of K+ in food samples

An analytical method is reported for the preparation of K⁺‐imprinted nanoparticles using cryptand 222 as the complexing agent, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the crosslinker and 2,2′‐azobisisobutyronitrile as the radical initiator. The prepared particles have a diameter of 200–250 nm. The maximum adsorption capacity of potassium ion‐imprinted polymer particles was 120 μmol/g. The optimum pH for quantitative extraction was 9.0. The nature of the eluent, eluent concentration, adsorption and desorption times, weight of the polymer material, aqueous phase, and desorption volumes were also studied. The relative selectivity coefficients of K⁺/Li⁺, K⁺/Na⁺, K⁺/Rb⁺ and K⁺/Cs⁺ were 48.10, 4.80, 29.70, and 43.4, respectively. The relative standard deviation and limit of detection of the method were obtained 1.61% and 4.62 ng/L, respectively. Finally, the method was applied for the determination of potassium ions from different samples using flame photometry.     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

Metal‐imprinted microsphere prepared by surface template polymerization and its application to chromatography

A metal ion‐imprinted microsphere was prepared by surface molecular template polymerization. Trimethylolpropane trimethacrylate (TRIM), zinc ions, 1,12‐dodecanediol‐O, O′‐diphenyl phosphonic acid (DDDPA) were used as a crosslinking agent, an imprint molecule, and a functional host molecule. The Zn(II)‐imprinted microspheres, which are spherically well‐defined particles, were prepared by using water‐in‐oil‐in‐water (W/O/W) multiple emulsions. The combination of TRIM and DDDPA serves to align the recognition sites resulting in better template sites produced on the polymer surface. We firstly conducted diagnostic zinc‐ and copper‐ion adsorption tests with the Zn(II)‐imprinted and unimprinted microspheres in order to make an assessment on the effectiveness of the molecular imprinting technique. Further, the metal‐imprinted microspheres were applied to the column operation. The separation and recovery of metals were carried out by an adsorption column packed with the Zn(II)‐imprinted microspheres. This performance was compared to that of commercial chelating resins that possess similar phosphoric functional groups. The Zn(II)‐imprinted polymer shows an extremely high selectivity to the imprinted zinc ions compared to that of the commercial chelating resin. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 689–696, 2000     

Selective and sensitive determination of silver ions at trace levels based on ultrasonic‐assisted dispersive solid‐phase extraction using ion‐imprinted polymer nanoparticles

We describe ultrasonic‐assisted dispersive solid‐phase extraction based on ion‐imprinted polymer (UA‐DSPE‐IIP) nanoparticles for the selective extraction of silver ions. Ultrasound is a good and robust method to facilitate the extraction of target ions in the sorption step and elution of the target ions in the desorption step. The IIP nanoparticles used in the UA‐DSPE‐IIP were prepared by precipitation polymerization. To prepare the IIP nanoparticles, 2‐vinylpyridine, ethylene glycol dimethacrylate, 2,2′‐azobisisobutyronitrile, 2‐picolinic acid, silver and chloroform–methanol (50:50) solution were used as functional monomer, cross‐linker, initiator, silver‐binding ligand, template ion and porogen, respectively. The IIP nanoparticles were characterized using Fourier transformed infrared spectroscopy, thermogravimetric and differential thermal analysis, X‐ray diffraction and scanning electron microscopy. A Box–Behnken design was used for optimization of sorption and desorption steps in UA‐DSPE‐IIP. In the sorption step: pH of solution, IIP amount (mg), sonication time for sorption (min); in the desorption step: concentration of eluent (mol l⁻¹), volume of eluent (ml), sonication time (min) for desorption were investigated and optimized by Box–Behnken design. The optimum conditions for the method were: pH of solution, 7; sonication time for sorption, 7 min; IIP amount, 17 mg; type and concentration of eluent, HCl 1.5 mol l⁻¹; volume of eluent, 2 ml; sonication time for desorption, 140 s. Under the optimized conditions the limit of detection and relative standard deviation for the detection of silver ions using UA‐DSPE‐IIP were found to be 0.09 μg l⁻¹ and <3%, respectively.     

Synthesis and Adsorption Performance of Surface‐Grafted Co(II)‐Imprinted Polymer for Selective Removal of Cobalt

The surface‐grafting ion‐imprinting technology was applied to synthesis of a new Co(II)‐imprinted polymer [Co(II)‐IP], which could be used for selective removal of Co(II) from aqueous solutions. The prepared polymer was characterized by using the infrared spectra (IR), X‐ray diffractometer (XRD), X‐ray energy dispersion spectroscopy (EDS) and scanning electron microscopy (SEM). The maximum adsorption capacity values for the Co(II)‐imprinted polymer and non‐imprinted polymer (NIP) were 22 and 8 mg/g, respectively. The Freundlich equation fitted the adsorption isotherm data well. The applicability of two kinetic models including pseudo‐first‐order and pseudo‐second‐order models was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity, and correlation coefficients. Results suggested that chemical process could be the rate‐limiting step in the adsorption process. And the adsorption of Co(II) on the Co(II)‐imprinted polymer was endothermic. The relative selectivity coefficients of the Co(II)‐imprinted polymer for Co(II)/Pb(II), Co(II)/Cu(II), Co(II)/Ni(II), Co(II)/Sr(II) and Co(II)/Cs(I) were respectively 11.5, 6.1, 13.8, 9.4, and 8.1 times greater than that of the non‐imprinted polymer. Eventually, the desorption conditions of the adsorbed Co(II) from the Co(II)‐imprinted polymer were also studied in batch experiments.     

Tailor‐made ion‐imprinted polymer based on functionalized graphene oxide for the preconcentration and determination of trace copper in food samples

A tailor‐made Cu(II) ion‐imprinted polymer based on large‐surface‐area graphene oxide sheets has been synthesized for the preconcentration and determination of trace copper from food samples by solid‐phase extraction. Attributed to the ultrahigh surface area and hydrophilicity of graphene oxide, the Cu(II) ion‐imprinted polymer prepared by the surface ion‐imprinting technique exhibited a high binding capacity and a fast adsorption rate under the optimized experimental conditions. In the static adsorption experiments, the maximum adsorption capacity of Cu(II) ion‐imprinted polymer is 109.38 mg/g at 25°C, which is much higher than that of the nonimprinted polymer (32.12 mg/g). Meanwhile, the adsorption is very rapid and equilibrium is reached after approximately 30 min. The adsorption mechanism is found to follow Langmuir adsorption model and the pseudo‐second‐order adsorption process. The Cu(II) ion‐imprinted polymer was used for extracting and detecting Cu(II) in food samples combined with graphite flame atomic adsorption spectrometry with high recoveries in the range of 97.6–103.3%. The relative standard deviation and limit of detection of the method were evaluated as 1.2% and 0.37 μg/L, respectively. The results showed that the novel absorbent can be utilized as an effective material for the selective enrichment and determination of Cu(II) from food samples.     

Synthesis of molecularly imprinted polymer nanoparticles for the fast and highly selective adsorption of sunset yellow

Novel molecularly imprinted polymer nanoparticles were synthesized by precipitation polymerization with sunset yellow as the template and [2‐(methacryloyloxy)ethyl] trimethylammonium chloride as the functional monomer. The molecularly imprinted polymer nanoparticles were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and their specific surface area and thermal stability were measured. The molecularly imprinted polymer nanoparticles had a high adsorption capacity in wide pH range (pH 1–8) for sunset yellow. The adsorption equilibrium only needed 5 min, and the quantitative desorption was very fast (1 min) by using 10.0 mol/L HCl as the eluant. The maximum adsorption capacity of the molecularly imprinted polymer nanoparticles for sunset yellow was 144.6 mg/g. The adsorption isotherm and kinetic were well consistent with Langmuir adsorption model and pseudo‐second‐order kinetic model, respectively. The relative selectivity coefficients of the molecularly imprinted polymer nanoparticles for tartrazine and carmine were 9.766 and 12.64, respectively. The prepared molecularly imprinted polymer nanoparticles were repeatedly used and regenerated ten times without significant absorption capacity decrease.     

Preparation of the thermosensitive metal ion imprinted polymer in supercritical carbon dioxide: application in the selective recognition of copper (II)

The temperature‐sensitive Cu(II) ion imprinted polymer (Cu(II)‐MIIP) materials were prepared via precipitation polymerization methods in supercritical carbon dioxide (scCO₂) by using methanol as cosolvent. In the polymerization process, the polymerization mixture consists of copper ion, N‐isopropylacrylamide (functional monomer), ethylene glycol dimethacrylate (crosslinker), and 2,2′‐azobisisobutyronitrile (initiator). Non‐imprinted polymer particles were similarly prepared in the same way except for the presence of copper ion in the polymerization reaction. In this study, the characteristic of swelling/shrinking for Cu(II)‐MIIP in response to the change in temperature was investigated by scanning electron microscopy and photograph of swelling/shrinking for Cu(II)‐MIIP in deionized water. The above‐synthesized polymer particles were characterized by using Fourier transform infrared, thermo‐gravimetric analysis, and X‐ray diffraction techniques. Furthermore, the complete removal of the copper metal ion from the CuP was confirmed by atomic absorption spectroscopy. The selectivity adsorption of polymer materials was investigated from dilute aqueous solutions, and it was found to have an imprinting efficiency of 2.13 for Zn and Co ions. Copyright © 2011 John Wiley & Sons, Ltd.     

A high selective ion‐imprinted polymer grafted on a novel nanoporous material for efficient gold extraction

In this work, for the first time, an ion‐imprinted polymer was developed for selective extraction and determination of gold ions. To increase the sorbent efficiency, this polymer was coated on a novel nanoporous carbon‐based material, carbohydrate‐derived Max‐Planck Gesellschaft 1, which is also the first example of grafting imprinted polymer on nanoporous‐carbon material. These particles were applied successfully for preconcentration of ultratrace amount of gold ions, following determination by flame atomic absorption spectrometry. Some effective factors on the efficiency of gold ions extraction, such as concentration and volume of eluent, sample and eluent flow rates, and also effect of interfering ions especially palladium and platinum ions, were investigated. The LOD was determined to be 0.27 ng/mL. Furthermore, the precision of the method was calculated to be 2.14% under optimal conditions with recovery more than 97.3%. The technique was also used to determine the concentration of gold ions in mine stone samples with satisfactory results. The accuracy of this method was investigated by determination of gold ions concentrations in several reference materials with certified gold content.     

One‐step preparation of magnetic imprinted nanoparticles adopting dopamine‐cupric ion as a co‐monomer for the specific recognition of bovine hemoglobin

A novel magnetic core–shell polydopamine–cupric ion complex imprinted polymer was prepared in one‐step through surface imprinting technology, which could specifically recognize bovine hemoglobin from the real blood samples. The polymerization conditions and adsorption performance of the resultant nanomaterials were investigated in detail. The results showed that the cupric ion played an important role in the recognition of template proteins. The saturating adsorption capacity of this kind of imprinted polymers was 2.23 times greater than those of imprinted polymers without cupric ion. The imprinting factor of the imprinted materials was as high as 4.23 for the template molecule. The selective separation bovine hemoglobin from the real blood sample is successfully applied. In addition, the prepared materials had excellent stability and no obvious deterioration after five adsorption–regeneration cycles. Easy preparation, rapid separation, high binding capacity and satisfactory selectivity for the template protein make this polymer attractive in the separation of high‐abundance proteins.     

Analysis of tetracyclines from milk powder by molecularly imprinted solid‐phase dispersion based on a metal–organic framework followed by ultra high performance liquid chromatography with tandem mass spectrometry

A novel molecularly imprinted polymer that could selectively recognize tetracyclines in milk powder was synthesized using a metal–organic framework as a support material, tetracycline as template molecule, and 3‐aminophenylboronic acid as a functional monomer and a cross‐linking agent. The novel molecularly imprinted polymer was characterized by Fourier transform infrared spectrometry, transmission electron microscopy, X‐ray diffractometry, thermogravimetric analysis, and N₂ adsorption/desorption measurements. The adsorption isotherms, adsorption kinetics, adsorption thermodynamics, and selective adsorption experiments of the novel molecularly imprinted polymer to tetracycline were also studied. The novel molecularly imprinted polymer was used as dispersant of matrix solid‐phase dispersion to extraction tetracyclines. After that, the tetracyclines extracted from milk powder were determined by ultra high performance liquid chromatography with tandem mass spectrometry. Under the optimal conditions, the detection limits of tetracyclines were 0.217–0.318 ng/g. The relative standard deviations of intra‐ and interday precision ranged from 3.8 to 6.9% and from 2.8 to 7.4%, respectively. In all three concentration levels (1.0, 10, 50 ng/g), the recoveries of tetracyclines ranged from 84.7 to 93.9%. The method was successfully applied to the determination of tetracyclines in milk powder.     

Water‐compatible halloysite‐imprinted polymer by Pickering emulsion polymerization for the selective recognition of herbicides

A water‐compatible molecularly imprinted polymer was prepared by Pickering emulsion polymerization using halloysite nanotubes as stabilized solid particles. During polymerization, we used 4‐vinylpyridine as monomer, divinylbenzene as cross‐linking agent, toluene as porogen, 2,2‐azobisisobutyronitrile as initiator, 2,4‐dichlorophenoxyacetic acid as template to form the oil phase, and Triton X‐100 aqueous solution to form the water phase. The halloysite nanotubes molecularly imprinted polymer was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Kinetic and equilibrium bindings were also employed to evaluate the adsorption properties of the imprinted polymer. The imprinted polymer showed better selectivity, more rapid kinetic binding (60 min) for 2,4‐dichlorophenoxyacetic acid in pure water compared with rebinding in toluene. The imprinted polymer was used as a sorbent to enrich and separate 2,4‐dichlorophenoxyacetic acid from water, and was detected by high‐performance liquid chromatography with UV detection.     

Efficient and selective separation of metronidazole from human serum by using molecularly imprinted magnetic nanoparticles

Magnetic molecularly imprinted nanoparticles were prepared through surface‐initiated reversible addition fragmentation chain transfer polymerization by using metronidazole as a template. The molecularly imprinted magnetic nanoparticles were characterized by attenuated total reflection Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy, X‐ray diffraction, and vibrating sample magnetometry. The adsorption characteristics were also investigated and the kinetics of the adsorption of metronidazole on the imprinted nanoparticles were described by the second‐order kinetic model with the short equilibrium adsorption time (30 min). The adsorption isotherm was well matched with the Langmuir isotherm in which the maximum adsorption capacity was calculated to be 40.1 mg/g. Furthermore, the imprinted magnetic nanoparticles showed good selectivity as well as reusability even after six adsorption–desorption cycles. The imprinted magnetic nanoparticles were used as a sorbent for the selective separation of metronidazole from human serum. The recoveries of metronidazole from human serum changed between 97.5 and 99.8% and showed similar sensitivity as an enzyme‐linked immunoassay method. Therefore, the molecularly imprinted magnetic nanoparticles might have potential application for the selective and reliable separation of metronidazole from biological fluids in clinical applications.     

Flame photometric determination of cesium ion after its preconcentration with nanoparticles imprinted with the cesium-dibenzo-24-crown-8 complex

We report on the synthesis of cesium ion-imprinted polymer nanoparticles that were prepared by a precipitation polymerization strategy using dibenzo-24-crown-8 ether as a selective crown ether, methacrylic acid as the functional monomer, ethyleneglycol dimethacrylate as the crosslinker, and AIBN as the radical initiator. The prepared sorbents have a diameter of 50–90 nm and display highly selective binding capability for Cs(I) ion, with rapid adsorption and desorption. The maximum adsorption capacity is 50 mg g^?1, and the preconcentration factor is around 100 at pH 9.0. Cesium ion was then determined by flame photometry with a detection limit (3σ) of 0.7 ng mL^?1 and with a standard deviation of 0.9 %.

On‐Line Selective Solid‐Phase Extraction of Copper with a Surface Ion Imprinted Silica Gel Sorbent

Copper(II)‐ion imprinted silica gel (Cu‐IISG) sorbent was synthesized by surface imprinting technique and was employed as a selective solid‐phase extraction material for on‐line preconcentration and separation, then coupled with atomic absorption spectrometry (AAS) determination of Cu(II). The higher selectivity coefficient of Cu‐IISG for Cu(II) in the presence of competitive ions such as Fe(III), Ni(II) and Zn(II) was above 411, which was 35 times of NISG. The static adsorption capacity and dynamic adsorption capacity were 41.11 mg g^?1 and 16.20 mg g^?1, respectively. The Cu‐IISG offered a fast kinetics for the adsorption and desorption of Cu(II), which can be used for on‐line preconcentration and detection. Two certified reference materials of GBW07301a sediment and GBW07401 soil were analyzed and the determined values were in a good agreement with the certified values. The developed method was also successfully applied to the determination of trace copper in tea leaf with satisfactory results (recovery between 96.3% and 102.3%).     

Facile preparation of polydopamine‐coated imprinted polymers on the surface of SiO2 for estrone capture in milk samples

Estrone molecularly imprinted polymers were synthesized through the self‐polymerization of dopamine on the surface of silica gels, which had the characteristics of mild polymerization conditions, simple reaction procedure and good specific recognition ability for estrone. The estrone molecularly imprinted polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and nitrogen adsorption–desorption tests. The characterization confirmed that the imprinted polymers were successfully grafted on the surface of silica gels. Through investigating the adsorption performance, the prepared estrone molecularly imprinted polymers exhibited high adsorption capacity, fast mass transfer, as well as excellent selectivity toward estrone. The estrone molecularly imprinted polymers as the solid‐phase extraction adsorbent coupled with high‐performance liquid chromatography was developed to determine estrone from the milk samples. The developed estrone molecularly imprinted polymer solid‐phase extraction with high‐performance liquid chromatography method exhibited satisfactory specificity, precision, accuracy and good linearity relationship in the range of 0.2–20 μg/mL. The developed method is simple, fast, effective and high specificity method and it provides a new method to detect the residues of estrone in animal foods.     

Molecularly imprinted polymer coating on metal‐organic frameworks for solid‐phase extraction of fluoroquinolones from water

In this work, a novel surface molecularly imprinted polymer with high adsorption capacity, high adsorption rate, and high selectivity for fluoroquinolones was prepared on the surface of UiO‐66‐NH₂, which is a kind of metal‐organic framework. The surface morphology and adsorption properties of this molecularly imprinted polymer were investigated. The maximum adsorption capacity was 99.19 mg/g, and adsorption equilibrium was achieved within 65 s. Combined with reversed‐phase high‐performance liquid chromatography, the molecularly imprinted polymer was used to selectively enrich, separate and analyze fluoroquinolones present in lake water. The results showed that the recoveries of the four fluoroquinolones were 92.6–100.5%, and the relative standard deviations were 2.9–6.4% (n = 3). The novel molecularly imprinted polymer is an excellent adsorbent and has broad application prospects in the enrichment and separation of trace analytes in complex samples.     

Facile and versatile strategy to prepare magnetic molecularly imprinted particles based on the coassembly of magnetic nanoparticles and amphiphilic random copolymers

Magnetic molecularly imprinted polymer nanoparticles for bisphenol A were prepared by coassembling magnetic nanoparticles and amphiphilic random copolymers. Under optimized conditions, bisphenol A as template molecules, magnetic molecularly imprinted polymer particles with regular morphology, small size, good monodispersity, and high content of OA‐Fe₃O₄ were prepared by the coassembly method using P(MMA‐co‐MAA) with monomer ratio of 9:1. These magnetic molecularly imprinted polymer particles could be rapidly collected by an external magnet within 1 min. The saturated adsorption capacity of the magnetic molecularly imprinted polymer for bisphenol A was 201.5 mg/g, and the imprinting factor was 2.5. The separation factors for bisphenol A to β‐estradiol, estriol, and diethylstilbestrol was 3.1, 2.9, and 3.7, respectively. Unlike assembling amphiphilic copolymer in the selective solvent, the coassembly process was simple and rapid. Therefore, the present work provided a facile and versatile approach to construct magnetic molecularly imprinted polymer nanoparticles under mild conditions.     

Novel metal‐ion‐mediated,complex‐imprinted solid‐phase microextraction fiber for the selective recognition of thiabendazole in citrus and soil samples

A novel metal‐ion‐mediated complex‐imprinted‐polymer‐coated solid‐phase microextraction (SPME) fiber used to specifically recognize thiabendazole (TBZ) in citrus and soil samples was developed. The complex‐imprinted polymer was introduced as a novel SPME coating using a “complex template” constructed with Cu(II) ions and TBZ. The recognition and enrichment properties of the coating in water were significantly improved based on the metal ion coordination interaction rather than relying on hydrogen bonding interactions that are commonly applied for the molecularly imprinting technique. Several parameters controlling the extraction performance of the complex‐imprinted‐polymer‐coated fiber were investigated including extraction solvent, pH value, extraction time, metal ion species, etc. Furthermore, SPME coupled with HPLC was developed for detection of TBZ, and the methods resulted in good linearity in the range of 10.0–150.0 ng/mL with a detection limit of 2.4 ng/mL. The proposed method was applied to the analysis of TBZ in spiked soil, orange, and lemon with recoveries of 80.0–86.9% and RSDs of 2.0–8.1%. This research provides an example to prepare a desirable water‐compatible and specifically selective SPME coating to extract target molecules from aqueous samples by introducing metal ions as the mediator.     

Inverse Suspension Polymerization as a New Tool for the Synthesis of Ion‐Imprinted Polymers

Ion‐imprinted polymer beads are prepared for the first time by inverse suspension polymerization in mineral oil using nickel(II) as the template ion. As water is not used as the continuous phase, this new route of synthesis avoids the risk that the ion template leaves the suspension for the aqueous phase. The leaching of nickel from the resin beads is very good due to the large porosity of the polymer beads. The ratio between the ligand and the crosslinker has been increased leading to higher adsorption capacities. Comparing these values with those of the non‐imprinted polymers and studying the effect of some interfering ions proves that an optimum can be found for the ratio ligand/crosslinker.