药物-无机复合材料姜黄素嵌入镁铝水滑石的合成、表征及缓释性能的研究

采用共沉淀和离子交换方法将药物姜黄素(Cur)嵌入到Mg-Al-LDHs层间,制备了一种新型的药物-无机复合材料,借助XRD,FTIR和TG-DTA等手段对样品进行了表征。结果表明,Cur阴离子以平行或者单层、沿其短轴方向垂直嵌入到层间;与主体层板通过氢键与静电作用形成超分子结构;该超分子结构姜黄素-水滑石复合材料与姜黄素相比,其热稳定性、耐酸性及缓释性能均有大幅度提高,缓释实验数据符合Bhaskar方程和一级动力学方程模型。     

超分子结构姜黄素插层镁铝水滑石的组装、结构及缓释性能

以镁铝水滑石为主体, 以中药提取物姜黄素为客体, 由共沉淀法、离子交换法和焙烧复原法三种不同方法组装得到超分子结构复合材料——姜黄素插层镁铝水滑石. 并用XRD, IR, HPLC等手段对该材料进行了表征. 结果表明, 共沉淀法和离子交换法成功组装得到两种不同结构的姜黄素插层产物, 使材料的层间距扩大为0.82～1.36 nm, 层间客体姜黄素阴离子是以平行或者单层垂直的定位方向排列于层间的. 考察了该材料在不同pH值的磷酸盐缓冲溶液中的缓释性能, 其缓释历程为客体阴离子与介质中 的离子交换过程. 该研究指出了阴离子层状材料——水滑石在中药释释剂领域的应用潜力.     

卡托普利插层锌铝水滑石的超分子结构、热稳定性及缓释性能研究

采用共沉淀及离子交换的方法将高血压类药物卡托普利(Cpl)插入到Zn/Al-NO₃-LDHs层间，借助XRD、FTIR、UV-Vis、TG-DTA和ICP等手段对样品进行表征。结果表明，Cpl阴离子可取代层间的NO₃^-，组装得到晶体结构良好的Cpl-LDHs。XRD结果表明得到的Cpl-LDHs的层间距为1.955～2.053 nm，并与根据PM3半经验分子轨道法优化计算得到的Cpl-三维尺寸进行比较，推测客体Cpl-是沿长轴方向与层板呈一定角度双层倾斜的方式交替排布于层间，与主体层板通过氢键与静电作用形成超分子结构;该超分子结构材料与卡托普利相比，其热稳定性及缓释性能得到较大提高;缓释实验数据符合Higuchi及Korsmeyer-Peppas扩散模型，说明本实验Cpl的释放很好的符合菲克扩散机理。     

甲氨蝶呤柱撑水滑石超分子结构层柱材料的插层组装

用共沉淀和离子交换法将抗肿瘤类药物甲氨蝶呤(MTX)插层组装到水滑石层间,制备了一种新型的结晶度高、晶相单一且MTX在层间有序排列的超分子结构的药物-无机复合层柱材料.用XRD、原子光谱、元素分析、FT/IR、SEM及TG-DSC分析表征了超分子结构层柱材料的结构,并给出其结构模型.     

谷氨酸柱撑水滑石超分子结构层柱材料的插层组装

用返混沉淀方法实现了谷氨酸柱撑水滑石超分子结构层柱材料的插层组装,得到结晶度高、晶相单一且谷氨酸在层间有序排列的超分子结构层柱材料.用X射线衍射、原子光谱、元素分析、红外光谱及热重-差热分析表征了超分子结构层柱材料的结构,给出其结构模型.     

2-羟基-4-甲氧基二苯甲酮-5-磺酸插层水滑石的制备及性能(英文)

以层状镁铝双金属氢氧化物(MgAlLayeredDoubleHydroxides,Mg-AlLDHs)为主体,以有机紫外光稳定剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP)为客体,结合焙烧复原法和阴离子交换法合成了具有超分子结构有机-无机插层复合物(MgAl-BPLDHs),研究了层间阴离子、反应介质、pH值、反应时间等因素对于插层材料超分子结构的影响。用FTIR、XRD、TG-DTA、UV-Vis和粒度分析对其不同尺度的结构、热稳定性和紫外光稳定性等进行表征。结果表明,采用阴离子交换法难以进行插层反应;通过焙烧复原法可显著降低MgAl-LDHs层间CO2-离子,从而有利于BP阴离子交换进入MgAl-LDHs层间,在去离子水中,水温100℃,pH=7,反应时间为48h,BP过饱和的条件下合成得到最高插层率的MgAl-BP-LDHs;主体水滑石层板与客体以静电力和氢键相互作用,得到的超分子结构材料具有良好的热稳定及兼具优异的紫外屏蔽、吸收性能,是一种新型的有机-无机复合光热稳定剂。     

2-羟基-4-甲氧基二苯甲酮-5-磺酸插层水滑石的制备及性能

以层状镁铝双金属氢氧化物（MgAl Layered Double Hydroxides,Mg-Al LDHs）为主体,以有机紫外光稳定剂2-羟基-4-甲氧基二苯甲酮-5-磺酸（BP）为客体,结合焙烧复原法和阴离子交换法合成了具有超分子结构有机-无机插层复合物（MgAl-BP-LDHs）,研究了层间阴离子、反应介质、pH值、反应时间等因素对于插层材料超分子结构的影响。用FTIR、XRD、TG-DTA、UV-Vis和粒度分析对其不同尺度的结构、热稳定性和紫外光稳定性等进行表征。结果表明,采用阴离子交换法难以进行插层反应;通过焙烧复原法可显著降低MgAl-LDHs层间CO₂^-离子,从而有利于BP阴离子交换进入MgAl-LDHs层间,在去离子水中,水温100℃,pH=7,反应时间为48 h,BP过饱和的条件下合成得到最高插层率的MgAl-BP-LDHs;主体水滑石层板与客体以静电力和氢键相互作用,得到的超分子结构材料具有良好的热稳定及兼具优异的紫外屏蔽、吸收性能,是一种新型的有机-无机复合光热稳定剂。     

插层组装超分子结构有机物柱撑阴离子层状材料

通过改变插层组装条件对有机物柱撑阴离子层状材料(organic pillared layered double hydrox-ide，简称organo-LDHs)进行调控，可获得在光化学、电化学、催化、控制释放等方面具有广阔应用前景的新型无机—有机功能性超分子结构复合材料。本文以插层组装概念及超分子结构为理论基础，介绍了超分子结构organo-LDHs的插层组装方法、表征手段、层间有机物客体的定位及应用研究。     

超分子结构甲基橙插层水滑石的组装及其光热稳定性研究

甲基橙是一种酸性染料,但因为它的光和热稳定性较差,使其应用范围和使用效果受到了一定限制.以Mg_0.67Al_0.33(OH)₂(CO₃)_0.165·0.58H₂OLDHs为前体,采用离子交换法,将甲基橙插入到LDHs层间,借助XRD,FTIR,UV-Vis和TG-DTA等手段对样品进行表征.结果表明,甲基橙阴离子可以完全取代前体层间的CO₃^2-离子,组装得到晶体结构良好的甲基橙插层LDHs.对其结构进行研究发现,LDHs主体层板与客体甲基橙阴离子之间存在静电吸引、氢键和其它弱化学键相互作用,具有超分子结构特征.该超分子结构材料不仅保持了甲基橙本身的颜色,而且与甲基橙相比,其耐光性和耐热性均有大幅度的提高.     

新型超分子复合发光材料四足配体铕配合物-蒙脱土的插层组装及发光性质

通过离子交换反应将四足配体铕配合物[EuL(NO3)]2+[L=1,1,1’,1’-四(吡啶-2-羧酸酯基)联三甲基丙烷]插层组装到蒙脱土(MT)层板间, 制备出一种新型的超分子复合发光材料[EuL(NO3)]2+-MT. 用元素分析、XRD、FTIR、UV-Vis和热分析对材料进行了表征, 并对其荧光性质进行了研究. 结果表明, 复合材料保持了蒙脱土良好的层柱结构特征, 其层间距d(001)值与插层配离子的直径吻合得较好, 配离子以单层形式分布于蒙脱土层板间. 在紫外光激发下, 复合材料发出较强的Eu3+特征荧光, 其相对荧光强度、荧光单色性和荧光寿命大大优于相应配合物的乙醇溶液. 复合材料中配合物的发光性能、光稳定性和热稳定性较纯配合物有明显提高.     

癸二酸根插层水滑石的组装及其结构表征

有机物柱撑水滑石类化合物的基础和应用研究是水滑石层柱材料研究领域中较为活跃的一个分支。近年来,化学家和材料学家较为系统、深入地研究了有机物在水滑石层板间的插层组装方法、插层驱动力、主鄄客体间的超分子作用、插层产物的结构表征、性能和应用[1],制备出了许多具有特     

Intercalation of salicylic acid into ZnAl and MgAl layered double hydroxides for a controlled release formulation

Salicylic acid was intercalated into an inorganic host consisting of ZnAl/MgAl-layered double hydroxides lamella by reconstruction method. Powder X-ray diffractograms showed that the basal spacing of the layered double hydroxide bearing salicylate as the intergallery anion expanded from 7.6 and 7.8 Å in the precursors to 14.49 Å and 14.85 in ZnAl and MgAl layered double hydroxide, respectively. These values suggest that the organic molecules form bilayers in the interlayer space. Fourier transform infrared study further confirmed intercalation of salicylate into the interlayer’s of the layered double hydroxides. The thermal stability of the intercalated salicylic acid is significantly enhanced compared with the pure form before intercalation. Using the XRD results combined with a molecular simulation model, a possible representation of the salicylate anion positioning between the lamellar layers has been proposed. The in vitro drug release from intercalated material was remarkably lower than that from the corresponding physical mixture at pH 7.5. The kinetic analysis showed the importance of the diffusion through the particle in controlling the drug release rate. The obtained results show that hydrotalcite may be used to prepare modified release formulations.     

Sugar-anionic clay composite materials: intercalation of pentoses in layered double hydroxide

The intercalation of non-ionized guest pentoses (ribose and 2-deoxyribose) into the Mg-Al and Zn-Al layered double hydroxides (LDHs) was carried out at 298 K by the calcination-rehydration reaction using the Mg-Al and Zn-Al oxide precursors calcined at 773 K. The resulting solid products reconstructed the LDH structure with incorporating pentoses, and the maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 20 times that by the Zn-Al oxide precursor. The ribose/Mg-Al LDH was observed to have the expanded LDH structure with a broad (003) spacing of 0.85 nm. As the thickness of the LDH hydroxide basal layer is 0.48 nm, the interlayer distance of the ribose/Mg-Al LDH is 0.37 nm. This value corresponds to molecular size of ribose in thickness (0.36 nm), supporting that ribose is horizontally oriented in the interlayer space of LDH. The maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 5 times that of 2-deoxyribose. Ribose is substituted only by the hydroxyl group at C-2 position for 2-deoxyribose. Therefore, the number of hydroxyl group of sugar is essentially important for the intercalation of sugar molecule into the LDH, suggesting that the intercalation behavior of sugar for the LDH was greatly influenced by hydrogen bond between hydroxyl group of the intercalated pentose and the LDH hydroxide basal layers.     

The intercalation of metalloporphyrin complex anions into layered double hydroxides

Investigations to elucidate the structures of the cobalt(III) and manganese(III) complexes of tetra(p-sulfonatophenyl)porphinate anions (M(III)TSPP; M = Co and Mn), intercalated in Mg-Fe/Cl and Mg-Al/Cl layered double hydroxides (LDHs) have been carried out. Powder X-ray diffraction analysis, IR and UV-vis diffuse reflectance spectroscopy of Co(III)TSPP and Mn(III)TSPP intercalated into the interlayer spaces of LDH resulted in their perpendicular alignment against the host layers in the plane of the hybrid.     

Layered double hydroxides as supports for intercalation and sustained release of antihypertensive drugs

Zn/Al layered double hydroxides (LDHs) were intercalated with the anionic antihypertensive drugs Enalpril, Lisinopril, Captopril and Ramipril by using coprecipitation or ion-exchange technique. TG-MS analyses suggested that the thermal stability of Ena⁻, Lis⁻ (arranged with monolayer, resulted from X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) analysis was enhanced much more than Cap^- and Ram^- (arranged with bilayer). The release studies show that the release rate of all samples markedly decreased in both pH 4.25 and 7.45. However, the release time of Ena^-, Lis^- were much longer compared with Cap^-, Ram^- in both pH 4.25 and 7.45, it is possible that the intercalated guests, arranged with monolayer in the interlayer, show lesser repulsive force and strong affinity with the LDH layers. And the release data followed both the Higuchi-square-root law and the first-order equation well. Based on the analysis of batch release, intercalated structural models as well as the TG-DTA results, we conclude that for drug-LDH, stronger the affinity between intercalated anions and the layers is, better the thermal property and the stability to the acid attack of drug-LDH, and the intercalated anions are easier apt to monolayer arrangement within the interlayer, were presented.     

十二烷基磺酸插层类水滑石的制备及其对烟嘧磺隆油悬浮剂流变性的影响

以Mg-Al类水滑石为前体,制备了疏水的十二烷基磺酸插层类水滑石（DSO-LDHs）,对其结构进行了光学显微镜、XRD和红外光谱表征。 结果表明,十二烷基磺酸钠成功插入到Mg-Al类水滑石层间。 DSO-LDHs作为触变材料应用于4%烟嘧磺隆油悬浮剂时,流变学研究结果表明,农药颗粒通过静电作用附着在DSO-LDHs特殊的薄片层结构中。 随着DSO-LDHs添加量的增加,油悬浮体系呈正触变性,且体系的屈服值增大,而析油率下降。     

Delamination and restacking of hybrid layered double hydroxides assessed by in situ XRD

Delamination and restacking of dodecyl-sulfate-intercalated hydrotalcite in CCl4 and toluene were followed by in situ low-angle XRD. It is shown that exfoliation of hybrid layered double hydroxides must be rationalized in terms of the miscibility of the solvent and the aliphatic chains of the intercalated amphiphilic anions. The macroscopic appearance of diluted systems, however, is determined by the interaction between the edges of the exfoliated lamella.