Structural change of layered perovskite La2Ti2O7 at high pressures

The perovskite-related layered structure of La₂Ti₂O₇ has been studied at pressures up to 30 GPa using synchrotron radiation powder X-ray diffraction (XRD) and Raman scattering. The XRD results indicate a pronounced anisotropy for the compressibility of the monoclinic unit cell. The ratio of the relative compressibilities along the [100], [010] and [001] directions is ∼1:3:5. The greatest compressibility is along the [001] direction, perpendicular to the interlayer. A pressure-induced phase transition occurs at 16.7 GPa. Both Raman and XRD measurements reveal that the pressure-induced phase transition is reversible. The high-pressure phase has a close structural relation to the low-pressure monoclinic phase and the phase transition may be due to the tilting of TiO₆ octahedra at high pressures.     

Pressure-induced structural changes of the tetragonal Bi2CuO4

The tetragonal compound Bi₂CuO₄ was investigated at high pressures by using in situ Raman scattering and X-ray diffraction (XRD) methods. A pressure-induced structural transition started at 20 GPa and completed at ∼37 GPa was found. The high pressure phase is in orthorhombic symmetry. Raman and XRD measurements revealed that the above phase transition is reversible.     

Structural behavior of Sr2Bi2O5 at high pressures

The structure of Bi₂Sr₂O₅ at high pressures is investigated by in situ X-ray diffraction (XRD) and Raman scattering methods. Raman results indicate that there are two pressure-induced phase transitions that occurred at ∼1.4 and ∼11 GPa, respectively. XRD measurements reveal only one high-pressure phase, which is indexed with a monoclinic unit cell and the possible space groups are P121(No. 3), P1m1(No. 6) and P12/m1(No. 10). The phase transition above 11 GPa is probably due to the symmetry change without discontinuity of the unit cell. The high-pressure phase is quenchable and it is a new dense form and about 11% denser than the normal orthorhombic Bi₂Sr₂O₅ at room conditions.     

Pressure-induced amorphization in Y2(WO4)3: in situ X-ray diffraction and Raman studies

The high-pressure behavior of Y₂(WO₄)₃ has been investigated at room temperature by in situ X-ray diffraction and Raman scattering measurements. Both the studies show that beyond ∼3 GPa, this compound smoothly transforms from the ambient orthorhombic phase to a disordered phase. The structural modifications are found to be reversible up to ∼4 GPa but become irreversible at higher pressures. Low pressures of transformation imply that these changes are intrinsic and not due to non-hydrostatic stresses. In addition, the correlation between the stability range of orthorhombic phase and counter cation size supports that this compound has a large field of negative thermal expansion in this family of compounds.     

Phase transitions of LiAlO2 at high pressure and high temperature

This work presents a comprehensive study on phase transitions in LiAlO₂ system at high pressures and temperatures (0.5-5.0 GPa and 300-1873 K, respectively), as well as the phase stability for polymeric phases of LiAlO₂ in the studied P-T space by X-ray diffraction (XRD). Besides the previously described polymorphic hexagonal α-phase, orthorhombic β-phase and tetragonal δ-phase, a possible new phase of LiAlO₂ was observed after the tetragonal γ-LiAlO₂ sample was treated at 5.0 GPa and 389 K. The stable regimes of these high-pressure phases were defined through the observation of coexistence points of the polymeric phases. Our results revealed that LiAlO₂ could experience structural phase transitions from γ-LiAlO₂ to its polymorphs at lower pressures and temperatures compared to the reported results. Hexagonal α-LiAlO₂ with highly (003) preferential orientation was prepared at 5.0 GPa and 1873 K.     

V2O5-TiO2复合半导体光催化材料结构及光响应性能研究

采用溶胶凝胶法制备了V₂O₅-TiO₂复合半导体材料，通过Raman、XRD及UV-Vis DRS等实验方法研究了V₂O₅与TiO₂复合对材料表面组成、晶体结构以及光响应性能的影响。结果表明：钒加入后优先与TiO₂作用形成较为稳定的金红石型TiVO₄晶相，其中V⁴⁺是促进TiO₂发生相变的关键；随着钒加入量的增加，V₂O₅由表面高分散状态逐渐聚集形成晶相，并释放部分Ti⁴⁺使之形成锐钛矿型TiO₂晶相，使得体相中金红石型TiO₂的含量有所下降；复合后形成的TiVO₄晶相显著提高了材料对可见光的吸收率，并使其吸光域红移至460 nm左右。     

Phase transitions in A-site substituted perovskite compounds: The (Ca1-2xNaxLax)TiO3 (0?x?0.5) solid solution

The (Ca_1-2xNa_xLa_x)TiO₃ (0?x?0.5) A-site substituted perovskite compounds have been synthesized and characterized by XRD and Raman spectroscopy at room temperature. The XRD powder diffraction study suggests that the end-member Na_1/2La_1/2TiO₃ crystallizes in the tetragonal space group I4/mcm. The phase transition from Pbnm to I4/mcm is located between x=0.34 and 0.39 and is driven by the variation of ionic radii at the A-site. The observed Raman modes are in agreement with group theory analysis, and the relationships between the behavior of structural parameters (e.g. Ti-O-Ti bond angle), indicated by long-range order, and the corresponding Raman frequency shifts and intensity evolution, indicated by short-range order, are established and discussed in terms of the radius effect and the mass effect.     

Raman scattering study on pressure-induced phase transformation of marokite (CaMn2O4)

An in-situ Raman Spectroscopic study was conducted to explore the pressure-induced phase transformation of CaMn₂O₄ to pressures of 73.7 GPa. Group theory yields 24 Raman active modes for CaMn₂O_4, of which 20 are observed at ambient conditions. With the slight compression below 5 GPa, the pressure-induced contraction compensates the structural distortion induced by a Jahn–Teller (JT) effect, resulting in the occurrence of the zero pressure shifts of the JT-related Raman modes. Upon elevation of pressure to nearby 35 GPa, these Raman modes start to display a significant variation in pressure shift, implying the appearance of a pressure-induced phase transformation. Group factor analyses on all possible structure polymorphs indicate that the high-pressure phase is preferentially assigned to an orthorhombic structure, having the CaTi₂O₄ structure. The cooperative JT distortion is continuously reduced in the CaMn₂O₄ polymorph up to 35 GPa. Beyond 35 GPa, it is found that the JT effect was completely suppressed by pressure in the newly formed high-pressure phase. Upon release of pressure, this high-pressure phase transforms to the original CaMn₂O₄ phase, and continuously remains stable to ambient conditions.     

Synthesis and Characterization of TiO2/YFeO3 and Its Photocatalytic Oxidation of Gaseous Benzene

YFeO₃ was prepared by coprecipitation method and citric acid method, and TiO₂/YFeO₃ heterosystem photocatalysts were synthesized by loading TiO₂ sol on the surface of YFeO₃via sol-gel method. Their photocatalytic activities were evaluated by the decomposition of gaseous benzene under UV light illumination. The prepared photocatalysts were characterized by nitrogen adsorption-desorption, X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-Vis diffuse reflectance spectroscopy. Results revealed that the heterosystem photocatalysts prepared by coprecipitation method showed higher activity, and the maximum conversion of benzene could reach 44.7% within 180 min. The YFeO₃ samples prepared from coprecipitation method and citric acid method were absolutely in orthorhombic phase. The deposited titania was dispersed on the surface of carrier and a certain interaction existed between TiO₂ and YFeO₃. The two heterosystems photocatalysts had narrow band-gap energies.     

Pressure induced structural phase transition of OsB2: First-principles calculations

Orthorhombic OsB₂ was synthesized at 1000 °C and its compressibility was measured by using the high-pressure X-ray diffraction in a Diacell diamond anvil cell from ambient pressure to 32 GPa [R.W. Cumberland, et al. (2005)]. First-principles calculations were performed to study the possibility of the phase transition of OsB₂. An analysis of the calculated enthalpy shows that orthorhombic OsB₂ can transfer to the hexagonal phase at 10.8 GPa. The calculated results with the quasi-harmonic approximation indicate that this phase transition pressure is little affected by the thermal effect. The calculated phonon band structure shows that the hexagonal P 6₃/mmc structure (high-pressure phase) is stable for OsB₂. We expect the phase transition can be further confirmed by the experimental work.     

High-pressure transitions in MgAl2O4 and a new high-pressure phase of Mg2Al2O5

Phase transitions in MgAl₂O₄ were examined at 21-27 GPa and 1400-2500 °C using a multianvil apparatus. A mixture of MgO and Al₂O₃ corundum that are high-pressure dissociation products of MgAl₂O₄ spinel combines into calcium-ferrite type MgAl₂O₄ at 26-27 GPa and 1400-2000 °C. At temperature above 2000 °C at pressure below 25.5 GPa, a mixture of Al₂O₃ corundum and a new phase with Mg₂Al₂O₅ composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg₂Al₂O₅ phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) Å, b=12.1952(6) Å, c=2.7916(2) Å, V=319.03(3) Å³, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O₆ octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O₆ octahedra. The structure is related with that of ludwigite (Mg, Fe²⁺)₂(Fe³⁺, Al)(BO₃)O₂. The molar volume of the Mg₂Al₂O₅ phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al₂O₃ corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl₂O₄ among various A²⁺B³⁺₂O₄ compounds.     

Composition-induced structural phase transitions in the (Ba1−xLax)2In2O5+x (0?x?0.6) system

Composition-induced structural phase changes across the high temperature, fast oxide ion conducting (Ba_1−xLa_x)₂In₂O_5+x, 0?x?0.6, system have been carefully analysed using hard mode infrared (IR) powder absorption spectroscopy, X-ray powder diffraction and electron diffraction. An orthorhombic brownmillerite to three-dimensionally disordered cubic perovskite phase transition in this system is signalled by a drastic change in slope of both wavenumber and average line widths of IR spectra as a function of composition. Some evidence is found for the existence of an intermediate tetragonal phase (previously reported to exist from electron diffraction data) around x∼0.2. The new spectroscopic data have been used to compare microscopic and macroscopic strain parameters arising from variation in composition. The strain and spectroscopic data are consistent with first-order character for the tetragonal→orthorhombic transition, while the cubic→tetragonal transition could be continuous. Differences between the variation with composition of spectral parameters and of macroscopic strain parameters are consistent with a substantial order/disorder component for the transitions. There is also evidence for precursor effects within the cubic structure before symmetry is broken.     

High pressure behavior of α-NaVO3: A Raman scattering study

The reported pressure-induced amorphization in α-NaVO₃ has been re-investigated using Raman spectroscopy. Discontinuous changes are noted in the Raman spectrum above 5.6 GPa implying large structural changes across the transition. The decrease in frequency of the V-O stretching mode across the transition suggests that the vanadium atom may be in octahedral coordination in the high pressure phase. Excessive broadening of the internal modes is observed above 6 GPa. New peaks characteristic of a crystalline phase gain in intensity at higher pressures in the bending modes region; however, the transformation is not complete even at 13 GPa. Co-existence of phases is noted over a significant pressure range above the onset of transition. Pressure released spectrum is found to be a mixture of crystalline α-phase, traces of crystalline β-phase and highly disordered phase consisting of V-O units in five- and six-fold coordination.     

A Raman spectroscopic study of the phase transition of BaZr(PO4)2: Evidence for a trigonal structure of the high-temperature polymorph

We have studied the structural evolution of monoclinic BaZr(PO₄)₂ during heating up to 835 K by Raman spectroscopy. In agreement with previous studies we found a first-order phase transition at about 730 K during heating while upon cooling the reverse transition occurs at 705 K. However, some disagreement about the crystal structure of the high-temperature polymorph occurs in the literature. While the space group has not yet been determined, the X-ray diffraction pattern of the high-temperature phase has been indexed on either an orthorhombic or a hexagonal unit cell. We found that the number of Raman active internal PO₄ vibrational modes decrease from nine to six during the transition. A group theoretical survey through all orthorhombic, trigonal, and hexagonal factor groups revealed that the observed number of vibrations would only be consistent with the Ba and Zr atoms located at a site, the P and two O atoms at a C_3v(3m), and six O atoms at a C_s(m) site in the D_3d factor group. Based on our Raman data, the space group of the high-temperature polymorph is thus either , , or .     

Neutron powder diffraction study of A2BeF4 (A=K, Rb, Cs): Structure refinement and analysis of background

The crystal structure of potassium, rubidium and caesium fluoroberyllates have been re-examined by neutron powder diffraction at room temperature and at 1.5 K. Previously, their structures, obtained from X-ray data, were described in the Pn2₁a space group. However, the results obtained from Rietveld refinements, using powder neutron diffraction, at both temperatures, indicated that all structures are orthorhombic with space group Pnma. The known phase transition at high temperature is probably related to the appearance of a hexagonal pseudo-symmetry instead of the elimination of the mirror plane between the above mentioned orthorhombic space groups. A possible phase transition, at very low temperature, was discarded considering the stereochemical criteria concerning the structural stability of A₂BX₄ compounds. This was confirmed by thermal analysis. On the other hand, a modulated background has been detected in all samples during the refinements. This is compatible with the presence of an amorphous phase, coexisting with the crystalline phase, or with a disordered component within the main crystalline phase. Instead of using a polynomial function, the background was modelled by Fourier filtering improving the fit for all patterns. The radial distribution function (RDF) was obtained from the analysis of the calculated background and compared with the RDF from the average crystal structure. The advantages of neutron with respect to X-ray diffraction were evidenced for this type of compound with β-K₂SO₄-type structure.     

Structural changes of NaxCoO2 (x=0.74) at high pressures

Structural changes in the layered compound γ-Na_xCoO₂ (x=0.74) are studied by in situ Raman scattering and energy-dispersive X-ray diffraction methods at pressures up to 41 GPa. The pressure dependence of the lattice parameters indicate that γ-Na_xCoO₂ has a strong anisotropic compressibility before 15 GPa and the unit cell is easily compressed between layers. The discontinuity of the lattice parameters and Raman observations reveal that a phase transition occurred at pressures between 10 and 12 GPa. The high-pressure phase has the same hexagonal symmetry and the phase transition may be due to the pressure-induced rearrangement of one of the Na cations in the unit cell.     

Preparation and photocatalytic activity of Sb2S3/Bi2S3 doped TiO2 from complex precursor via gel-hydrothermal treatment

Sb₂S₃/Bi₂S₃ doped TiO₂ were prepared with the coordination compounds [M(S₂CNEt)₃] (M=Sb, Bi; S₂CNEt=pyrrolidinedithiocarbamate) as precursors via gel-hydrothermal techniques. The doped TiO₂ were characterized by XRD, SEM, XPS and UV-vis diffuse reflectance means. The photocatalyst based on doped TiO₂ for photodecolorization of 4-nitrophenol (4-NP) was examined. The optimal Bi₂S₃/Sb₂S₃ content, pH and different doped techniques have been investigated. Photocatalytic tests reveal that M₂S₃ doped TiO₂ via the gel-hydrothermal route performs better photocatalytic activity for photodegradation reaction of 4-nitrophenol (4-NP).     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

Crystal chemistry and crystallography of the SrR2CuO5 (R=lanthanides) phases

The crystal chemistry and crystallography of the compounds SrR₂CuO₅ (Sr-121, R=lanthanides) were investigated using the powder X-ray Rietveld refinement technique. Among the 11 compositions studied, only R=Dy and Ho formed the stable SrR₂CuO₅ phase. SrR₂CuO₅ was found to be isostructural with the “green phase”, BaR₂CuO₅. The basic structure is orthorhombic with space group Pnma. The lattice parameters for SrDyCuO₅ are a=12.08080(6) Å, b=5.60421(2) Å, c=7.12971(3) Å, V=482.705(4) Å³, and Z=8; and for the Ho analog are a=12.03727(12) Å, b=5.58947(7) Å, c=7.10169(7) Å, V=477.816(9) Å³, and Z=8. In the SrR₂CuO₅ structure, each R is surrounded by seven oxygen atoms, forming a monocapped trigonal prism (RO₇). The isolated CuO₅ group forms a distorted square pyramid. Consecutive layers of prisms are stacked in the b-direction. Bond valence calculations imply that residual strain is largely responsible for the narrow stability of the SrR₂CuO₅ phases with R=Dy and Ho only. X-ray powder reference diffraction patterns for SrDy₂CuO₅ and SrHo₂CuO₅ were determined.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.