9,9-二乙基芴在三氟化硼乙醚中的电化学聚合

在三氟化硼乙醚(BFEE)中,9,9-二乙基芴(DEF)直接阳极氧化聚合可以获得高质量聚(9,9-二乙基芴)膜(PDEF,电导率2×10-2S.cm-1).DEF在BFEE中的起始氧化电位为1.20 VvsSCE,远低于单体在0.1 mol.L-1Bu4NBF4的CH3CN溶液中的起始氧化电位(1.70 V).在BFEE中获得的PDEF膜具有良好的电化学性质.红外光谱和1H NMR结果表明聚合反应主要发生在2,7位.     

9,9-二辛基芴的电化学聚合

在三氟化硼乙醚(BFEE)中, 9,9-二辛基芴可以直接阳极氧化制备高质量聚(9,9-二辛基芴)膜, 其电导率为1×10^－2 S/cm. 9,9-二辛基芴在BFEE中的起始氧化电位为1.25 V vs. SCE, 低于单体在0.1 mol/L Bu₄NBF₄的乙腈溶液体系中的起始氧化电位(1.52 V vs. SCE). BFEE中获得的聚(9,9-二辛基芴)膜具有良好的电化学性质. 聚合物部分溶于氯仿、四氢呋喃、二甲基亚砜等极性溶剂. FTIR和¹H NMR表明聚合反应主要发生在2,7位. 荧光光谱表明聚合物是一种良好的蓝色荧光物质.     

三氟化硼乙醚溶液中聚(二苯并呋喃)的电化学合成

在三氟化硼乙醚-硫酸混合电解质溶液中,二苯并呋喃直接阳极氧化聚合可以获得高质量聚(二苯并呋喃)膜.二苯并呋喃在纯三氟化硼乙醚中的起始氧化电位为1.30 VvsSCE,远低于单体在0.1 mol.L-1Bu4NBF4乙腈溶液中的起始氧化电位(2.14 V).硫酸的加入进一步降低了二苯并呋喃的氧化电位.在三氟化硼乙醚-硫酸混合电解质溶液中,二苯并呋喃的起始氧化电位可降低至1.0 V;同时在该体系中获得的聚(二苯并呋喃)膜具有良好的电化学性质和荧光性质.     

三氟化硼乙醚溶液中卤代芴的电化学聚合

在三氟化硼乙醚(BFEE)溶液中9-溴芴和9,9-二氯芴可以直接阳极氧化制备聚(9-溴芴)和聚(9,9-二氯芴).单体在BFEE中的起始氧化电位远低于在乙腈体系中的起始氧化电位.聚(9-溴芴)和聚(9,9-二氯芴)均可溶于强极性有机溶剂,如二甲基亚砜、四氢呋喃等,并分别表现出良好的蓝色和黄绿色发光性能,其电导率测定为10-1S/cm.红外光谱和核磁共振波谱表明聚合反应主要发生在2,7位.     

9,10-二氢化菲在三氟化硼乙醚-浓硫酸混酸中的电化学聚合

在三氟化硼乙醚(BFEE)-浓硫酸混合电解质体系中直接氧化9,10-二氢化菲获得了高质量聚(9,10-二氢化菲)膜, 其电导率为3.8×10－1 S/cm. 9,10-二氢化菲在BFEE＋10%浓硫酸体系中的起始氧化电位为0.93 V vs. SCE, 远低于其在乙腈＋0.1 mol/L Bu4NBF4溶液中的起始氧化电位(1.75 V vs. SCE). 在BFEE＋10%浓硫酸体系中获得的聚(9,10-二氢化菲)膜具有良好的电化学性质. 聚合物部分溶于二甲基亚砜、四氢呋喃、氯仿等极性溶剂. FT-IR和量化计算表明聚合反应主要发生在2, 7位或者3, 6位. 荧光光谱和热重分析表明聚合物是一种良好的蓝色荧光材料且具有良好的热稳定性.     

1,8-亚乙基萘在三氟化硼乙醚-聚乙二醇中的电化学聚合

在三氟化硼乙醚(BFEE)-聚乙二醇(分子量400,PEG400)混合电解质溶液中,1,8-亚乙基萘直接阳极氧化聚合可以获得自支撑聚(1,8-亚乙基萘)膜.单体在三氟化硼乙醚+10%PEG400中的起始氧化电位为0.95 Vversus SCE,远低于单体在0.1 mol.L-1四氟化硼四丁基胺-乙腈溶液中的起始氧化电位(1.38 VversusSCE).同时PEG400的加入可以有效改善单体在三氟化硼乙醚中的溶解性.UV-Vis,FTIR和1H-NMR确定了1,8-亚乙基萘在4,5位聚合,荧光光谱表明固态及可溶聚(1,8-亚乙基萘)膜是蓝色发光材料.     

四氢呋喃/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在四氢呋喃/三氟化硼乙醚混合电解质中直接阳极氧化咔唑制备聚咔唑.单体的起始氧化电位为0.92 Vversus SCE,远低于单体在含0.1 mol.L-1Bu4NBF4的乙腈溶液中的起始氧化电位(1.36 Vversus SCE).在此体系中获得的聚咔唑膜具有良好的电化学活性和稳定性,其电导率为7.0×10-3S.cm-1.聚合物可部分溶解于二甲基亚砜等强极性有机溶剂.UV-Vis,FT-IR,1H-NMR证明聚合物共轭长链的形成.该体系中获得的聚咔唑是一种蓝光发射材料,并具有良好的热稳定性.     

聚吲哚及其衍生物的荧光光谱

在三氟化硼乙醚及其混合电解质中,吲哚及其衍生物阳极氧化可以获得高质量的聚吲哚及其衍生物膜:聚吲哚、聚(5-甲基吲哚)、聚(5-硝基吲哚)、聚(5-氰基吲哚)、聚(5-溴吲哚).它们可溶于DMSO和THF中.聚吲哚及其衍生物具有良好的荧光性质;单体的发射光谱与取代基有关,而聚合物的发射光谱几乎不受取代基的影响.电子离域程度增大,使得聚合物的激发和发射光谱红移,宽的分子量分布则会使聚合物的激发和发射光谱变宽.     

氟伐他汀钠的合成

以氟苯为起始原料,通过两步反应得N-(4-氟苯甲酰甲基)-N-(1-甲基乙基)苯胺(5);5在ZnCl2存在下环化得3-(4′-氟苯基)-1-(1′-甲基乙基)吲哚(6);6与3-N-甲基-N-苯基胺基丙烯醛发生Vilsmeier-Haauc反应得(E)-3-[3′-(4″-氟苯基)-1′-(1″-甲基乙基)吲哚-2′-基]-2-丙烯醛(8);8经缩合、还原、水解得氟伐他汀钠,总收率10.5%.     

AM/DMC/C11AM疏水缔合聚两性电解质的合成、表征与溶液性质

通过Ritter反应合成弱阴离子型疏水单体丙烯酰胺基十一烷基酸(C11AM). 以丙烯酰胺(AM)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)和丙烯酰胺基十一烷基酸(C11AM)为原料, 在水介质中合成新型疏水缔合聚两性电解质AM/DMC/C11AM. 利用1H NMR确证了疏水单体和共聚产物的分子结构. 流变性和芘荧光探针的研究结果表明, AM/DMC/C11AM系列疏水缔合聚两性电解质由于兼具疏水缔合性质和反聚电解质效应, 使其具有较好的耐盐性能.     

乙酸/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在新型混合电解质——乙酸含体积比26%的三氟化硼乙醚和5%的分子量为400的聚乙二醇中直接氧化咔唑制得高质量的聚咔唑膜,导电率为10-2 S·cm-1。在该体系中,咔唑的起始氧化电位相对于饱和甘汞电极只有0.89 V,远低于在含0.1 mol·L-1四氟化硼四丁基铵的乙腈溶液中的1.36V（相对于饱和甘汞电极）。从该体系中获得的聚咔唑膜具有良好的电化学性质和热稳定性,可以部分溶于二甲基亚砜、四氢呋喃等强极性溶剂。荧光光谱表明该体系中获得的聚咔唑膜是一种良好的蓝光发射材料。红外、核磁波谱和理论量子化学计算结果表明,咔唑的电化学聚合主要发生在3,6位。据我们所知,这是利用乙酸三氟化硼乙醚混合电解质进行电化学聚合的首次报道。     

Electrosyntheses of high‐quality poly(5‐nitroindole) films in boron trifluoride diethyl etherate containing additional diethyl ether

High‐quality poly(5‐nitroindole) (PNP) films were synthesized electrochemically by the direct anodic oxidation of 5‐nitroindole in boron trifluoride diethyl etherate (BFEE) containing additional 10% diethyl ether (EE) (by volume). The addition of EE to BFEE could improve the solubility of the monomer. The oxidation potential onset of 5‐nitroindole in this medium was measured to be only 1.04 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile and 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.53 V vs SCE). PNP films obtained from this medium showed good electrochemical behavior and good thermal stability with a conductivity of 10^?2 S cm^?1; this indicated that BFEE containing 10% EE was a suitable medium for the electrosyntheses of PNP films. Structural studies showed that the polymerization of the 5‐nitroindole ring occurred at the 2,3‐position. As‐formed PNP films were thoroughly soluble in the strong polar organic solvent dimethyl sulfoxide and partly soluble in tetrahydrofuran or acetone. Fluorescent spectral studies indicated that PNP was a good green‐light emitter, with excitation and emission wavelengths of 420 and 550 nm, respectively. To the best of our knowledge, this is the first time that nitro‐group‐substituted high‐quality conducting polymer films have been electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3986–3997, 2005     

Electrosyntheses of high‐quality polyphenanthrene in the electrolyte of boron trifluoride diethyl etherate containing trifluoroacetic acid

A novel inherently conducting polymer, high‐quality polyphenanthrene (PPh) films were synthesized electrochemically by direct anodic oxidation of phenanthrene (Ph) in boron trifluoride diethyl etherate (BFEE) containing a certain amount of trifluoroacetic acid (TFA). The oxidation potential of Ph in this medium was measured to be only 0.63 V versus SCE, which was greatly lower than that determined in acetonitrile + 0.1 mol L^?1 Bu₄NBF₄ (1.55 V vs. SCE). The electrolytes of BFEE containing TFA enable facile anodic oxidation of Ph monomer; however, similar oxidation using acetonitrile never produces such a polymeric material. PPh films obtained from this medium showed good redox activity and stability even in concentrated sulfuric acid. Dedoped PPh films were partly soluble in polar solvent such as CH₂Cl₂, acetone, tetrahydrofuran, and dimethyl sulfoxide. Fluorescent spectral studies indicate that PPh is a good blue‐light emitter. The structure and morphology of the polymer were studied by UV–vis spectroscopy, FTIR spectroscopy, ¹H NMR spectroscopy, and scanning electron microscopy, respectively. The results of quantum chemistry calculations of Ph monomer and the spectroscopies of dedoped PPh indicated the polymerization mainly occurred at C₍₉₎ and C₍₁₀₎ positions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3929–3940, 2007     

Electrosyntheses of high quality poly(5-methylindole) films in mixed electrolytes of boron trifluoride diethyl etherate and diethyl ether

High quality poly(5-methylindole) (P5MeI) films, especially with good fluorescence properties, were synthesized electrochemically by direct anodic oxidation of 5-methylindole in boron trifluoride diethyl etherate (BFEE) containing additional 50% diethyl ether (EE) (by volume). The oxidation potential onset of 5-methylindole in this medium was measured to be only 0.84 V vs. SCE, which was much lower than that determined in acetonitrile + 0.1 mol L⁻¹ TBATFB (1.08 V vs. SCE). P5MeI films obtained from this medium showed good electrochemical behavior and good thermal stability with conductivity of 10⁻² S cm⁻¹, indicating that BFEE was a better medium than acetonitrile for the electrosyntheses of P5MeI films. Dedoped P5MeI films were thoroughly soluble in strong polar solvent such as dimethyl sulfoxide (DMSO). ¹H NMR spectroscopy and FT infrared spectrum of dedoped P5MeI films strongly suggested that the monomers were linked via the positions 2 and 3. Fluorescent spectral studies indicated that P5MeI was a good violet-blue light emitter with the excitation and emission wavelength of 310 nm and 418 nm, respectively. To the best of our knowledge, this is the first case that 5-methyl group substituted polyindole films with good fluorescence properties can be electrodeposited.     

Electrosyntheses of free-standing poly(dibenzo-18-crown-6) films in boron trifluoride diethyl etherate on stainless steel electrode

High-quality free-standing poly(dibenzo-18-crown-6) (PDBC) films with a conductivity of 4.1 × 10⁻² S cm⁻¹ and good thermal stability were synthesized electrochemically on stainless steel electrode by direct anodic oxidation of dibenzo-18-crown-6 (DBC) in pure boron trifluoride diethyl etherate (BFEE). In this medium, the oxidation potential onset of DBC was measured to be only 0.98 V vs. SCE, which was much lower than that in acetonitrile + 0.1 mol L⁻¹ Bu₄NBF₄ (1.45 V vs. SCE). PDBC films obtained from this medium showed good redox activity and stability in BFEE. The structural characterization of PDBC was performed using UV-vis, FTIR spectroscopy. The results of quantum chemistry calculations of DBC monomer and FTIR spectroscopy of PDBC films indicated that the polymerization mainly occurred at C₍₄₎ and C₍₅₎ positions). Fluorescent spectral studies indicated that PDBC was a blue light emitter. To the best of our knowledge, this is the first report on the electrodeposition of free-standing PDBC films.     

一种耐高温聚噻吩膜的电化学合成

聚噻吩及其衍生物具有高的电导率、良好的环境稳定性以及易于调控的分子链结构,因此一直受到人们的广泛关注．但是,这类材料的耐温性能较差,从而将影响其在有机电子器件中的应用．