ssDNA/十八酸修饰碳糊电极的制备及伏安法表征

将石墨粉与十八酸在80 ℃下混合制成表面富含—COOH的基底碳糊电极(SA/CPE), 然后在活化剂N-羟基琥珀酰亚胺(NHS)和1-乙基-3-(3-二甲基氨丙基)碳二亚胺盐酸盐(EDC)存在下将ssDNA固定到电极表面制备ssDNA修饰电极(ssDNA/SA/CPE). 以亚甲基蓝(MB)为指示剂, 用循环伏安法对SA/CPE和ssDNA/SA/CPE进行电化学表征, 发现其在ssDNA/SA/CPE上较在SA/CPE上的氧化峰电流(i_pa)和还原峰电流(i_pc)分别增大1.9倍和1.7倍, 式电势(E_f)负移8 mV. 把ssDNA/SA/CPE放在互补ssDNA溶液中杂交后, MB的i_pa 和i_pc较在SA/CPE上分别增大1.0倍和0.8倍, E_f负移18 mV. 用0.5 mol/L 的NaOH溶液冲洗使电极表面杂交而成的dsDNA变性洗脱, MB的伏安信号几乎与在ssDNA/SA/CPE上一样. i_pc与SA/CPE上固定的ssDNA质量在1.0×10^－7～5.0×10^－6 g范围内成线性关系, 检测限为2.0×10^－9 g (S/N＝3). 这种既廉价又灵敏的电化学生物传感器有望在转基因植物产品检测研究中得到应用.     

石墨烯修饰玻碳电极对多巴胺的电催化氧化

通过3-巯丙基三乙氧基硅烷(METMS)将氧化石墨烯(GO)固载到玻碳电极(GCE)表面, 用电化学方法还原GO制备石墨烯修饰玻碳电极(rGO-METMS-GCE). 利用傅里叶变换红外光谱(FTIR)、 拉曼光谱(Raman)、 扫描电子显微镜(SEM)和原子力显微镜(AFM)等技术对GO和rGO-METMS-GCE的结构和表面形貌进行表征. 采用循环伏安(CV)和差分脉冲溶出伏安(DPV)法研究了rGO-METMS-GCE对多巴胺(DA)的电催化氧化性能及反应机理. 结果表明, 与裸GCE相比, DA在rGO-METMS-GCE电极上的氧化还原峰电流(i_pa和i_pc) 增大4倍, 氧化峰电位负移106 mV, 氧化峰与还原峰电位差(ΔE_p)从202 mV降低至66 mV, DA电化学氧化可逆性明显改善, 表明rGO-METMS-GCE对DA电化学氧化具有显著电催化作用. DA在rGO-METMS-GCE上的反应机理为单电子转移过程.     

基于ZrO2/AuNPs膜修饰电极的适配体传感器用于凝血酶的检测研究

提出了一种简单、无标记、可再生的电化学方法研究适配体和凝血酶之间的相互作用，采用亚甲基蓝(MB)做电化学指示剂，氧化锆(ZrO₂)-金纳米粒子(AuNPs)涂层修饰玻碳电极(GCE)。利用金-硫键及杂交化学反应，捕获探针和适配体依次修饰到电极表面，亚甲基蓝插入到DNA上，形成适配体传感器。电极表面的DNA双链在凝血酶的存在下发生解旋，MB在DNA上的吸附量随之减少，峰电流也显著降低，达到检测凝血酶的目的。实验显示，凝血酶在20 pmol/L～150 nmol/L的浓度范围内，峰电流的减小量随凝血酶浓度的升高而增大，检出限为20.6 fmol/L。该方法简单、灵敏、选择性好，并成功用于实际样品检测。     

电聚合硫菫膜修饰电极同时测定儿茶酚和氢醌

制备了电聚合硫堇膜修饰的玻碳电极(Thi/GCE),研究了儿茶酚(CC)和氢醌(HQ)在该修饰电极上的电化学行为.在CC和HQ共存体系中,二者在该修饰电极上与裸玻碳电极(GCE)相比,氧化峰电流增大且峰电位分别负移至165、68 mV,二者的氧化峰电位差变大且半峰宽变窄,使得两峰得以有效分离.据此利用差分脉冲伏安法可选...     

多巴胺在电沉积石墨烯修饰碳分子线电极上的电化学测定

以分子线二苯乙炔为修饰剂和粘合剂制备了一种新型的碳糊电极-碳分子线电极(CMWE),并以其为基底电极采用电化学还原法将石墨烯(GR)沉积到CMWE表面得到电沉积石墨烯修饰碳分子线电极(GR/CMWE)。考察了多巴胺(DA)在该修饰电极上的电化学行为。实验结果显示DA在GR/CMWE上出现了1对峰形良好的氧化还原峰,与裸电极相比,该氧化还原峰的电流增大,峰电位差减小,表明修饰电极对DA的电化学反应有催化作用。在最佳实验条件下峰电流与DA浓度在8.0×10-7~2.0×10-3mol/L范围内呈良好的线性关系,检出限(3σ)为2.55×10-7mol/L。将该电极用于多巴胺注射液样品的检测,结果满意。     

Electrochemical Behavior of Dopamine at Poly( Methylene Blue)/Graphene Modified Glassy Carbon Electrode

利用电聚合方法在石墨烯修饰的玻碳电极表面制备了聚亚甲基蓝/石墨烯修饰电极( PMB/GH/GCE).采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了多巴胺(DA)和抗坏血酸(AA)在该修饰电极上的电化学行为.在pH 6.9的磷酸盐缓冲溶液中,DA和AA分别在0.208 V和-0.108 V处产生灵敏的氧化峰,与其在聚亚甲基蓝和石墨烯单层修饰电极上的电化学行为相比,两者的峰电流明显增加,峰电位差达316 mV.研究表明,电聚合方法使亚甲基蓝牢固地非共价修饰到石墨烯上,并产生协同增效作用,较好地提高了电极的灵敏度和分子识别性能,有利于在大量AA存在下实现对DA的选择性测定.在1.00×10-3 mol/L AA的存在下,DA的差分脉冲伏安法峰电流与其浓度在1.00×10--7～5.00×10-3 mol/L范围内呈良好的线性关系,检出限达1.00 × 10-6mol/L.将该方法用于盐酸多巴胺注射液的测定,结果满意.     

DNA-纳米多孔羟基磷灰石修饰电极用于研究DNA与亚甲基蓝的相互作用

利用溶胶-凝胶法将具有优良生物相容性和独特吸附性的羟基磷灰石(HAp)修饰在玻碳电极上形成纳米多孔薄膜. 电化学实验结果证明该纳米多孔羟基磷灰石薄膜能有效地将双链DNA吸附于其表面. 采用循环伏安法系统研究了固定在HAp薄膜上的DNA与亚甲基蓝(MB)之间的相互作用. 实验结果表明, 在20～200 mV•s^－1扫描速度范围内该电极反应过程系表面反应控制; 在pH 6.0～7.4范围内, MB在DNA修饰电极上的峰电位随pH的增加而向负方向移动; 当磷酸盐缓冲溶液中的离子强度小于59 mmol•L^－1时, MB与DNA之间为静电作用, 当离子强度大于59 mmol•L^－1时, 二者之间既有静电作用, 也有部分嵌入作用. 根据Langmuir吸附公式, 得出MB与DNA之间的结合常数为4.2×10⁴ mol^－1•L.     

多巴胺在聚亚甲基蓝/石墨烯修饰电极上的电化学行为研究

利用电聚合方法在石墨烯修饰的玻碳电极表面制备了聚亚甲基蓝/石墨烯修饰电极(PMB/GH/GCE)。采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了多巴胺(DA)和抗坏血酸(AA)在该修饰电极上的电化学行为。在pH 6.9的磷酸盐缓冲溶液中,DA和AA分别在0.208 V和-0.108 V处产生灵敏的氧化峰,与其在聚亚甲基蓝和石墨烯单层修饰电极上的电化学行为相比,两者的峰电流明显增加,峰电位差达316 mV。研究表明,电聚合方法使亚甲基蓝牢固地非共价修饰到石墨烯上,并产生协同增效作用,较好地提高了电极的灵敏度和分子识别性能,有利于在大量AA存在下实现对DA的选择性测定。在1.00×10-3mol/L AA的存在下,DA的差分脉冲伏安法峰电流与其浓度在1.00×10-7～5.00×10-3mol/L范围内呈良好的线性关系,检出限达1.00×10-8mol/L。将该方法用于盐酸多巴胺注射液的测定,结果满意。     

电化学还原的氧化石墨烯修饰电极检测L-色氨酸

制备了氧化石墨烯修饰玻碳电极,并运用循环伏安法对氧化石墨烯进行了直接的电化学还原,研究了L-色氨酸在该电化学还原的氧化石墨烯修饰玻碳电极上的电化学行为。结果表明,L-色氨酸在该修饰电极上其氧化峰电流与裸玻碳电极相比增大了7.1倍,且峰电位负移80mV。利用差分脉冲伏安法,在pH=6.5的磷酸盐缓冲溶液中测定L-色氨酸,氧化峰电流与其浓度在0.4～65.0μmol/L范围内呈良好的线性关系,相关系数为0.998,方法检出限为0.2μmol/L。     

聚亚甲基蓝修饰金电极对抗坏血酸电催化氧化及其电分析方法研究

研究了亚甲基蓝(methylene blue,MB)聚合物膜修饰金电极(PMB/Au)的制备及其性质,通过电化学阻抗谱图对PMB/Au进行了表征,并对抗坏血酸(ascorbic acid,AA)在PMB/Au上的电化学行为进行了研究。结果表明,PMB/Au对AA的氧化具有良好的电催化作用,使AA的过电位降低约200 mV,氧化峰电流明显增大。测得AA在PMB/Au上的电荷转移系数为0.70,催化反应速率常数为5.99×103mol-1.L.s-1。用方波伏安法(Square Wave Voltammetry,SWV)测得氧化峰电流与AA浓度在2.0×10-5~6.0×10-3mol/L范围内呈良好线性关系,检出限为1.0×10-5mol/L。将PMB/Au应用于Vc片剂和Vc注射液中AA的测定。     

Cyclic voltammetric studies of the redox behavior of iron(III)-vitamin B6 complex at carbon paste electrode

Electrochemical redox behavior of Fe-vit B₆ complex is investigated in HEPES buffer in the pH range 5.1–13.1 using cyclic voltammetry. Well-defined anodic and cathodic peaks are observed in the voltammograms at pH 13.1. At pH 8.0, only one cathodic peak and at pH 5.1, only one anodic peak are found. At all the pH values, the peak potential separation is much higher than that of a reversible electrochemical reaction. The peak current ratio (i _pa/i _pc) is less than unity and decreases with the scan rate. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 6, pp. 691–697. The text was submitted by the authors in English.     

Cyclic Voltammetric Studies of Ferrocene in Nonaqueous Solvents in the Temperature Range from 248.15 to 298.15 K

In the present work the oxidation of ferrocene, Fe(C₅H₅)₂, to the ferrocenium cation, Fe(C₂H₅)₂ ⁺, was examined in the solvents acetonitrile (ACN), acetone (ACE), N-methylformamide (NMF), N,N-dimethylformamide (DMF), N,N-dimethylacetanide (DMA), 3-pentanone (PEN), dimethyl sulfoxide (DMSO) and dichloromethane (DCM) over the temperature range from 248.15 to 298.15 K using the technique of cyclic voltammetry. The anodic (E _pa) and the cathodic (E _pc) peak potentials, as well as the corresponding anodic (i _pa) and cathodic (i _pc) peak currents, were obtained at different scan rates (0.02, 0.05, 0.08 and 0.10 V ·s^–1). The half-wave potentials (E _1/2) of the Fe(C₂H₅)₂ ⁺/Fe(C₅H₅)₂ couple in the investigated solvent media have been evaluated. The diffusion coefficients (D) have been calculated using the Randles-Sevcik equation. The effects of changing the scan rate, the temperature and properties of the solvent medium such as viscosity and donor number on the electrochemical behavior of ferrocene have been examined.     

Ferrocene as a Reference Redox Couple for Aprotic Ionic Liquids

The electrochemical behavior of ferrocene has been studied in a number of room temperature ionic liquids. Diffusion‐controlled, well‐defined anodic and cathodic peaks were found for the Fc/Fc⁺ (ferrocene/ferrocenium) oxidation/reduction on the gold electrode. Ohmic resistance R between working and auxiliary electrodes was deduced from impedance measurements. Cyclic voltammograms were corrected for the base line current as well as for the ohmic drop (IR). The formal potential 1/2(E_pa+E_pc) for ferrocene reduction/oxidation in aprotic ionic liquids tested is within a relatively narrow range and may be approximated by the value of 0.527±0.018 V (against the cryptate Ag/Ag⁺222 in acetonitrile reference). Ferrocene diffusion coefficients, calculated from the peak current dependence on the sweep rate, were of the order of 10^?7 cm² s^?1.     

Carbon paste electrodes electrochemically modified with cyclodextrins

Cyclic voltammetry was used in order to obtain carbon paste electrodes (CPEs) modified with α- and β-cyclodextrins (CPE_α-CD, CPE_β-CD) in HClO₄ media as electrolyte. The modified CPEs were obtained by applying 30 potential cycles, thus forming on the substrate a film with electroactive characteristics; a rise in current for the anodic and cathodic peaks became apparent as the number of cycles increased. Such behaviour confirmed the CPE modification by the species mentioned. The CPE_α-CD and CPE_β-CD exhibited significant stability before various electrolytes. In order to evaluate the sort of modification attained on the CPEs, a study was conducted, varying the potential scan rate, that confirmed the CD's presence. The modified electrodes were used to determine Pb(II) ions in solution within the range from 1×10^–5 M up to 1×10^–3 M. The CPE_α-CD and CPE_β-CD electrochemical response was studied by means of anodic stripping voltammetry of the Pb(II) ions, thereby giving a linear relation between the current for the anodic peak as a function of Pb(II) concentration with r ²=0.996 for the CPE_β-CD and 0.992 for the CPE_α-CD. Electronic Publication     

Remarkable Electrochemical Responses of Ferrocene/NaY Zeolite Composite modified Electrode Based on Hydrophobic Ionic Liquid

The ferrocene/NaY zeolite composites (Fc/NaY) are introduced on the surface of a glassy carbon electrode together with the hydrophobic ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆). The modified electrode thus constructed exhibits a pair of reversible redox peaks corresponding to ferrocene. Additionally the peak separation remains almost constant (58–75 mV) and the value of the ratio i_pa/i_pc is close to 1 for scan rates in the range from 10 to 1000 mV s^?1. The effects of the scan rate, aqueous supporting electrolytes, hydrophobic ionic liquid and the contents of ferrocene encapsulated by electrochemistry are investigated. The extrazeolite electron transfer process is discussed. Furthermore, the Fc/NaY/IL‐modified electrode shows good mediation towards oxidation of ascorbic acid, dopamine, hydroquinone, and catechol.     

Electrochemical oxidation of catechol at poly(indole-5-carboxylic acid) electrode

In this work we examined the electrochemical properties of poly(indole-5-carboxylic acid), PIn₅COOH. The polymer was produced by electrochemical polymerisation using cyclic voltammetry (CV). It was shown that PIn₅COOH is electroactive in aqueous solutions showing two redox processes in acidic solution and one redox process in solutions with pH > 4. The oxidation of catechol (CT) on Pt/In₅COOH modified electrodes was investigated by cyclic voltammetry (CV) and rotating disc electrode (RDE) voltammetry. It was established that CT was oxidised only after the oxidation of polymer film was initiated and that polymer significantly enhanced the oxidation and reduction peak currents in comparison with bare Pt electrode. The variation of peak currents (i _pa, i _pc) as a function of CT concentration was found to be linear up to 6 mM. Experiments with a rotating disk electrode show that the oxidation reaction of catechol occures not only at the polymer/electrolyte interface but also in the polymer film.     

Electrochemical Determination of Vitamin B12 Based on Cu2+‐Involved Fenton‐like Reaction

Poly(thionine) (PTH) film was generated on the electrochemically activated glassy carbon electrode (GCE(ea)) by using the two‐step cyclic voltammetric scan. Scanning electron microscopy, infrared spectral analysis and electrochemical measurement were employed to characterize the modified electrode surface. Hydroxyl radicals, which were produced by the Fenton‐like reaction, could induce the effective oxidization of PTH under near‐neutral condition and cause the notable enhancement of the cathodic peak current (I_pc) during the potential cycling process. Due to the binding of copper ions with the ligands liberated from V_B12 and the inferior catalytic ability of Co²⁺ for the generation of hydroxyl radicals, the addition of V_B12 into the Cu²⁺?H₂O₂ system inhibited the oxidization of PTH and resulted in the decrease of the I_pc value. The cathodic peak current change was linear with the logarithm of the V_B12 concentration in the range of 10 nmol L^?1–100 μmol L^?1 with a detection limit of 2 nmol L^?1 under optimal conditions. The developed sensor displayed excellent analytical performance including high sensitivity, good selectivity, acceptable reproducibility and satisfactory stability. The V_B12 content in the injection sample was measured and the recovery values were in the range of 92.0 %–102 %.     

Barium Sulfate Effects on the Electrochemical Behaviors of Nanostructured Lead Dioxide and Commercial Positive Plates of Lead-Acid Batteries

Positive electrode with uniform lead dioxide nanostructures directly synthesized by cyclic voltammetry (CV) method on the lead substrate in 1 M sulfuric acid solution including different concentration of barium sulfate. The effect of potential scan rate, sulfuric acid and barium sulfate concentration were studied on the morphology and particle size of lead dioxide using scanning electron microscopy (SEM) and X-ray diffraction techniques (XRD). The effect of barium sulfate was studied on the CV parameters including anodic peak current (I _p^a), cathodic peak current (I _p^c), anodic peak potential (E _p^a) and cathodic peak potential (E _p^c) during synthesis process. Finally, the effect of barium sulfate on the discharge capacity and cycle life of nanostructured positive electrodes and commercial positive plates was investigated. Both CV and battery test results showed that barium sulfate with concentration of 1 × 10⁻⁵ M can be used as suitable additive for positive paste of lead-acid batteries.     

Oxygen Reactions at the Interface of Nonstoichiometric Fluorides LaF3 and CeF3 with Chemically Modified Electrodes

The oxygen reaction at the interface LaF₃(CeF₃)|electrode,O₂(g) is studied in air on Pt and C electrodes and electrodes modified by supported oxides of Co, Sr, and/or La on C, Si, or Pt substrates. The experimental methods used are voltammetry with a linear potential change and stripping voltammetry and cyclic voltammetry. The voltammetric response is dependent on the nature of solid electrolyte and electrode, the balance between the substrate and active agent, and on the conditions of thermal treatment of electrodes. Mobile oxygen forms are discovered at interfaces CeF₃|C (Co _x O _y ), ₂ ([C] : [Co] = 1 : 10, 1 : 20); CeF₃|C (Co _x O _y ), ₂([C] : [Co] = 1 : 10); and CeF₃|Pt (Co _x O _y ), O₂([Pt] : [Co] = 1 : 40). The peak current I _pa in the anodic curves increases with extending the limit of cathodic potential scan E _rc. The peak current I _pc in the cathodic curves increases with extending the limit of anodic potential scan E _ra.