超支化聚苯乙烯-线型聚苯乙烯-超支化聚甲基丙烯酸甲酯三嵌段聚合物的合成与表征

合成了超支化聚苯乙烯-线型聚苯乙烯-超支化聚甲基丙烯酸甲酯三嵌段聚合物(HPS-b-LPS-b-HPMMA). 首先分别合成了带有炔基和溴的三硫代碳酸酯(ATC和BTC), 然后通过苯乙烯(St)的可逆加成-断裂链转移(RAFT)聚合, 制得端炔基和端基溴的线型聚苯乙烯大分子RAFT试剂, 然后将大分子RAFT试剂的溴末端转化为叠氮末端. 接着在大分子RAFT试剂存在情况下, 通过自缩合原子转移自由基共聚合(SCATRCP)分别制得端炔基超支化聚苯乙烯-线型聚苯乙烯(HPS-b-LPS)和端叠氮基超支化聚甲基丙烯酸甲酯-线型聚苯乙烯(HPMMA-b-LPS)两嵌段聚合物. 最后将两种两嵌段聚合物通过点击(click)反应偶合, 得到不对称的超支化-线型-超支化三嵌段聚合物HPS-b-LPS-b-HPMMA. 核磁共振氢谱(¹H NMR)、凝胶渗透色谱(GPC)结果表明, 所得产物分子量可控, 得到了预期结构的聚合物.     

基于炔类单体的点击聚合制备超支化聚合物

超支化聚合物由于其独特的树枝状结构和物理化学性质,已经得到了广泛关注及应用.而基于炔类单体的点击聚合作为一类简单、高效的聚合反应已被广泛用于超支化聚合物的制备.本文对近5年利用叠氮-炔和巯基-炔点击聚合制备超支化聚合物的工作进行了简要综述.其中,Cu(I)催化的叠氮-炔点击聚合可制备1?4-立构规整的超支化聚三唑;Ru(II)催化的叠氮-炔点击聚合可制备1?5-立构规整的超支化聚三唑;活化的炔类单体和叠氮单体的无金属催化点击聚合可得到1?4-异构体含量高(高达91.7%)的超支化聚合物;而光引发?热引发及自发的巯基-炔点击聚合可制备含硫的超支化聚合物.此外,对所制备的超支化聚合物的功能和应用进行了简单介绍,最后还简单讨论了点击聚合制备超支化聚合物方面的可能发展方向.     

用多官能团引发剂合成超支化聚苯乙烯及其C60衍生物

通过α-溴丙酰溴与Z5(季戊四醇与2,2-二羟甲基丙酸缩聚的产物)酯化反应制得超支化原子转移自由基聚合(ATRP)引发剂Z5-B(约含19个引发点).在100℃及CuCl/N,N,N,N",N"-五甲基二亚乙基三胺催化下,用Z5-B引发苯乙烯的ATRP聚合(环己酮为溶剂,体积分数为50%),得到超支化的聚苯乙烯,将溴端基叠氮化后与C60反应,获得超支化聚苯乙烯C60衍生物.该超支化C60衍生物可用于光限制材料.     

酶促开环聚合与自缩合乙烯基共聚合相结合制取超支化聚合物

在Novozyme 435脂肪酶催化下, 甲基丙烯酸羟乙酯(HEMA)引发己内酯(ε-CL)开环聚合反应, 得到一端为双键, 另一端为羟基的直链聚己内酯(PCL)产物; 将其端羟基官能化得到大分子AB*型单体, 与苯乙烯以原子转移自由基聚合(ATRP)反应形式进行自缩合乙烯基共聚合, 得到超支化结构聚苯乙烯-b-聚己内酯产物.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——三层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型具有梯度极性的多羟基多臂星状聚合物刷 .端羟基超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 )与 2 溴 异丁基酰溴反应制得大分子引发剂 (HP Br) ,以Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)为催化体系 ,进行甲基丙烯酸甲酯 (MMA)的ATRP反应 ,得到以甲基丙烯酸甲酯为臂的多臂星状超支化聚合物 (HP g PMMA) .又以HP g PMMA为引发剂 ,进行甲基丙烯酸羟乙酯 (HEMA)的ATRP聚合 ,得到核壳型具有梯度极性的多羟基多臂星状超支化聚合物 (HP g PMMA b PHEMA) ,继续将其羟基官能团溴代化 (与 2 溴 异丁基酰溴反应 ) ,引发HEMA的ATRP溶液聚合 ,得到了多臂星状超支化聚合物刷 .产物的结构用1 H NMR、FTIR、GPC等进行了表征和测试 .     

两亲性全季铵盐超支化聚合物的设计与合成及主-客体超分子着色应用研究

采用高效的巯基-炔点击化学与Menschutkin季铵化反应,合成了一种带有1个叠氮基、2个炔基和2个季铵盐基团的AB2型季铵盐单体,通过核磁共振、红外光谱、质谱等方法对单体结构进行了确认.将所得单体进行点击聚合,得到全季铵盐超支化聚合物,并用端叠氮基的长链烷烃封端,得到核亲水-壳憎水的两亲性超支化聚季铵盐.研究所得两亲性超支化聚合物对染料的装载性能,结果表明所合成的带正电荷两亲性聚合物对多种带负电荷的水性染料装载效果好,平均相转移率高达95%.进一步将装载染料的主-客体超分子复合物用于聚合物制品着色,发现其对SBS及PMMA等聚合物有很好的着色效果,着色均匀且不掉色,着色的膜色泽鲜艳透明.     

ATRP与点击化学相结合制备环状聚甲基丙烯酸甲酯

利用原子转移自由基聚合(ATRP)与点击反应相结合制备环状聚合物. 根据ATRP原理, 用含端炔的有机卤化物作为引发剂时, 产物的一端为炔基, 另一端则为卤素原子, 而卤素原子本身可作为叠氮化物的原料, 从而可利用点击反应使聚合物成环.     

ATRP与点击化学结合制备树状星型聚合物

本文通过将ATRP技术和点击化学相结合的方法来制备树状星型聚合物[(PMMA)2PSt]4. 首先通过1,3-偶极环加成反应对ATRP的核预聚物进行端基修饰, 得到后继ATRP反应的大分子引发剂, 进而引发第二单体的ATRP聚合生成树状星型聚合物.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

高密度柱状聚合物刷的合成

通过铜催化的叠氮-炔偶联反应(CuAAC),利用grafting-onto方法合成每个主链重复单元带有多于一条侧链的高接枝密度的柱状聚合物刷.首先,合成了带有缩酮保护的甲基丙烯酸2,2-双羟甲基丙酯单体(bisMPMA),并通过可逆加成-断裂链转移(RAFT)聚合得到窄分子量分布的线形聚合物.在酸性条件下脱去缩酮保护后,以羟基与戊炔酸酐的酯化反应,得到了每个重复单元带有2个炔基的聚合物主链.之后,利用高效的CuAAC反应,将末端带有叠氮基团的聚环氧乙烷(PEO)或聚苯乙烯(PS)侧链接枝到主链上,用核磁共振氢谱(1H-NMR)和体积排阻色谱(SEC)等对聚合物刷的结构进行表征.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.