Are the Fluorescent Properties of the Cyan Fluorescent Protein Sensitive to Conditions of Oxidative Stress?

The modifications induced by reactive oxygen species (ROS) on fluorescent proteins (FPs) may have important implications for live cell fluorescence imaging. Using quantitative γ-radiolysis, we have studied the ROS-induced biochemical and photophysical perturbations on recombinant cyan fluorescent protein (CFP). After oxidation by the ˙OH radical, the protein displays a modified RP-HPLC elution profile, while the CFP fluorescence undergoes pronounced decreases in intensity and lifetime, without changes in its excitation and emission spectra. Meanwhile, the Förster resonant energy transfer (FRET) between the single W⁵⁷ and the chromophore remains unperturbed. These results rule out a direct oxidation of the CFP chromophore and of W⁵⁷ as well as major changes in the protein 3D structure, but show that new fluorescent forms associated to a higher level of dynamic quenching have been generated. Thus, strict in situ controls are required when CFP is to be used for FRET studies in situations of oxidative activity, or under strong illumination.     

Genetically encoded fluorescent reporters of histone methylation in living cells

We report the design and characterization of two genetically encoded fluorescent reporters of histone protein methylation. The reporters are four-part chimeric proteins consisting of a substrate peptide from the N-terminus of histone H3 fused to a chromodomain (a natural methyllysine-specific recognition domain), sandwiched between a fluorescence resonance energy transfer (FRET)-capable pair of fluorophores, cyan fluorescent protein (CFP) and yellow fluorescent protein (YFP). Enzymatic methylation by a methyltransferase induces complexation of the methylated substrate peptide to the chromodomain, changing the FRET level between the flanking CFP and YFP domains. Reporters developed using the chromodomains from HP1 and Polycomb respond to enzymatic methylation at the lysine 9 and lysine 27 positions of histone H3, respectively, giving 60% and 28% YFP/CFP emission ratio increases in vitro or in single living cells. These reporters should be useful for studying gene silencing and X-chromosome inactivation with high spatial and temporal resolution in intact cells and may also aid in the search for conjectured histone demethylase activity.     

Quantitative FRET analysis with the EGFP-mCherry fluorescent protein pair

Fluorescence resonance energy transfer (FRET) between fluorescent proteins (FPs) is a powerful tool to investigate protein–protein interaction and even protein modifications in living cells. Here, we analyze the E⁰GFP-mCherry pair and show that it can yield a reproducible quantitative determination of the energy transfer efficiency both in vivo and in vitro . The photophysics of the two proteins is reported and shows good spectral overlap (Förster radius R ₀ = 51 Å), low crosstalk between acceptor and donor channels, and independence of the emission spectra from pH and halide ion concentration. Acceptor photobleaching (APB) and one- and two-photon fluorescence lifetime imaging microscopy (FLIM) are used to quantitatively determine FRET efficiency values. A FRET standard is introduced based on a tandem construct comprising donor and acceptor together with a 20 amino acid long cleavable peptidic linker. Reference values are obtained via enzymatic cleavage of the linker and are used as benchmarks for APB and FLIM data. E⁰GFP-mCherry shows ideal properties for FLIM detection of FRET and yields high accuracy both in vitro and in vivo . Furthermore, the recently introduced phasor approach to FLIM is shown to yield straightforward and accurate two-photon FRET efficiency data even in suboptimal experimental conditions. The consistence of these results with the reference method (both in vitro and in vivo ) reveals that this new pair can be used for very effective quantitative FRET imaging.     

Detection of mitochondrial caspase activity in real time in situ in live cells.

Apoptosis plays an important role in many physiological and pathological processes. The initiation and execution of the cell death program requires activation of multiple caspases in a stringently temporal order. Here we describe a method that allows real-time observation of caspase activation in situ in live cells based on fluorescent resonance energy transfer (FRET) measurement using the prism and reflector imaging spectroscopy system (PARISS). When a fusion protein consisting of CFP connected to YFP via an intervening caspase substrate that has been targeted to a specific subcellular location is excited with a light source whose wavelength matches the cyan fluorescent protein (CFP) excitation peak, the energy absorbed by the CFP fluorophore is not emitted as fluorescence. Instead, the excitation energy is absorbed by the nearby yellow fluorescent protein (YFP) fluorophore that is covalently linked to CFP through a short peptide containing the caspase substrate. Cleavage of the linker peptide by caspases results in loss of FRET due to the separation of CFP and YFP fluorophores. Using a mitochondrially targeted CFP-caspase 3 substrate-YFP construct (mC3Y), we demonstrate for the first time that there is caspase-3-like activity in the mitochondrial matrix of some cells at very late stage of apoptosis.     

囊泡型荧光纳米界面的构建及其对CD44蛋白的比例型传感

本文设计合成了两亲性Eu(Ⅲ)配合物(Eu L^3+)、两亲性香豆素衍生物(CA)以及荧光素修饰的透明质酸(HA-FA).Eu L^3+和CA可在水中共组装形成带正电荷的囊泡型荧光纳米界面(Eu L^3+/CA).HA-FA可通过静电引力络合在Eu L^3+/CA表面,促使CA与FA之间发生有效的荧光共振能量转移,体系的荧光发射以荧光素的绿色荧光为主.当肿瘤细胞标识物CD44蛋白与络合在囊泡表面上的透明质酸发生特异相互作用后,降低了CA与FA之间的能量转移效率,体系的荧光发射从绿色转变为蓝色.据此,实现了对CD44的高灵敏检测(DL=1.79×10^-7g/m L),而所测试的氨基酸、蛋白质等生物分子几乎不对荧光纳米界面的荧光性质产生影响.基于此,我们成功地将Eu L^3+/CA/HA-FA用于人乳腺癌细胞MCF-7和MDA-MB-231悬浮液中CD44蛋白的高效检测,该工作为构建新型CD44蛋白荧光探针提供了思路,为癌症早期诊断和治疗奠定了基础.     

Exploring protein structure and dynamics under denaturing conditions by single-molecule FRET analysis

Proteins are highly complex biopolymers, exhibiting a substantial degree of structural variability in their properly folded, native state. In the presence of denaturants, this heterogeneity is greatly enhanced, and fluctuations take place among vast numbers of folded and unfolded conformations via many different pathways. To better understand protein folding it is necessary to explore the structural and energetic properties of the folded and unfolded polypeptide chain, as well as the trajectories along which the chain navigates through its multi-dimensional conformational energy landscape. In recent years, single-molecule fluorescence spectroscopy has been established as a powerful tool in this research area, as it allows one to monitor the structure and dynamics of individual polypeptide chains in real time with atomic scale resolution using F?rster resonance energy transfer (FRET). Consequently, time trajectories of folding transitions can be directly observed, including transient intermediates that may exist along these pathways. Here we illustrate the power of single-molecule fluorescence with our recent work on the structure and dynamics of the small enzyme RNase H in the presence of the chemical denaturant guanidinium chloride (GdmCl). For FRET analysis, a pair of fluorescent dyes was attached to the enzyme at specific locations. In order to observe conformational changes of individual protein molecules for up to several hundred seconds, the proteins were immobilized on nanostructured, polymer coated glass surfaces specially developed to have negligible interactions with folded and unfolded proteins. The single-molecule FRET analysis gave insight into structural changes of the unfolded polypeptide chain in response to varying the denaturant concentration, and the time traces revealed stepwise transitions in the FRET levels, reflecting conformational dynamics. Barriers in the free energy landscape of RNase H were estimated from the kinetics of the transitions.     

Identification of intermediate species in protein-folding by quantitative analysis of amplitudes in time-domain fluorescence spectroscopy

In protein-folding studies it is often required to differentiate a system with only two-states, namely the native (N) and unfolded (U) forms of the protein present at any condition of the solvent, from a situation wherein intermediate state(s) could also be present. This differentiation of a two-state from a multi-state structural transition is non-trivial when studied by the several steady-state spectroscopic methods that are popular in protein-folding studies. In contrast to the steady-state methods, time-resolved fluorescence has the capability to reveal the presence of heterogeneity of structural forms due to the ‘fingerprint’ nature of fluorescence lifetimes of various forms. In this work, we establish this method by quantitative analysis of amplitudes associated with fluorescence lifetimes in multiexponential decays. First, we show that we can estimate, accurately, the relative population of species from two-component mixtures of non-interacting molecules such as fluorescent dyes, peptides and proteins. Subsequently, we demonstrate, by analysing the amplitudes of fluorescence lifetimes which are controlled by fluorescence resonance energy transfer (FRET), that the equilibrium folding-unfolding transition of the small single-domain protein barstar is not a two-step process.     

Quantitative distance information on protein-DNA complexes determined in polyacrylamide gels by fluorescence resonance energy transfer

In polyacrylamide gels, we have quantitatively determined Forster transfer (fluorescense resonance energy transfer, FRET) between two fluorescent dyes attached to DNA in protein-DNA complexes. The donor-dye fluorescein labeled to DNA retains its free mobility in the polyacrylamide gel, however, its fluorescence properties change. The different quantum yield of fluorescein in the gel is found to be independent of the gel concentration and can thus be quantitatively taken into account by a reduced Forster distance R0 of 46 A compared to 50 A in solution. We have determined global structural properties of two proteins binding to double-labeled DNA using a novel gel-based fluorescence resonance energy transfer assay. In polyacrylamide gels we have analyzed the binding of integration host factor (IHF) and the high mobility group protein NHP6a to their substrate DNA. The measured Forster transfer efficiency allows us to deduce information on the overall shape and the DNA bending angle in the complex.     

Competition between energy and proton transfer in ultrafast excited-state dynamics of an oligomeric fluorescent protein red Kaede

We investigated femtosecond and picosecond time-resolved fluorescence dynamics of a tetrameric fluorescent protein Kaede with a red chromophore (red Kaede) to examine a relationship between the excited-state dynamics and a quaternary structure of the fluorescent protein. Red Kaede was obtained by photoconversion from green Kaede that was cloned from a stony coral Trachyphyllia geoffroyi. In common with other typical fluorescent proteins, a chromophore of red Kaede has two protonation states, the neutral and the anionic forms in equilibrium. Time-resolved fluorescence measurements clarified that excitation of the neutral form gives the anionic excited state with a time constant of 13 ps at pH 7.5. This conversion process was attributed to fluorescence resonance energy transfer (FRET) from the photoexcited neutral form to the ground-state anionic form that is located in an adjacent subunit in the tetramer. The time-resolved fluorescence data measured at different pH revealed that excited-state proton transfer (ESPT) also occurs with a time constant of 300 ps and hence that the FRET and ESPT take place simultaneously in the fluorescent protein as competing processes. The ESPT rate in red Kaede was significantly slower than the rate in Aequorea GFP, which highly likely arises from the different hydrogen bond network around the chromophore.     

Visualization of Protein‐Specific Glycosylation inside Living Cells

Protein glycosylation is a ubiquitous post‐translational modification that is involved in the regulation of many aspects of protein function. In order to uncover the biological roles of this modification, imaging the glycosylation state of specific proteins within living cells would be of fundamental importance. To date, however, this has not been achieved. Herein, we demonstrate protein‐specific detection of the glycosylation of the intracellular proteins OGT, Foxo1, p53, and Akt1 in living cells. Our generally applicable approach relies on Diels–Alder chemistry to fluorescently label intracellular carbohydrates through metabolic engineering. The target proteins are tagged with enhanced green fluorescent protein (EGFP). Förster resonance energy transfer (FRET) between the EGFP and the glycan‐anchored fluorophore is detected with high contrast even in presence of a large excess of acceptor fluorophores by fluorescence lifetime imaging microscopy (FLIM).     

Optimization of pairings and detection conditions for measurement of FRET between cyan and yellow fluorescent proteins.

Detection of F?rster resonance energy transfer (FRET) between cyan and yellow fluorescent proteins is a key method for quantifying dynamic processes inside living cells. To compare the different cyan and yellow fluorescent proteins, FRET efficiencies were measured for a set of the possible donor:acceptor pairs. FRET between monomeric Cerulean and Venus is more efficient than the ECFP:EYFP pair and has a 10% greater F?rster distance. We also compared several live cell microscopy methods for measuring FRET. The greatest contrast for changes in intramolecular FRET is obtained using a combination of ratiometric and spectral imaging. However, this method is not appropriate for establishing the presence of FRET without extra controls. Accurate FRET efficiencies are obtained by fluorescence lifetime imaging microscopy, but these measurements are difficult to collect and analyze. Acceptor photobleaching is a common and simple method for measuring FRET efficiencies. However, when applied to cyan to yellow fluorescent protein FRET, this method becomes prone to an artifact that leads to overestimation of FRET efficiency and false positive signals. FRET was also detected by measuring the acceptor fluorescence anisotropy. Although difficult to quantify, this method is exceptional for screening purposes, because it provides high contrast for discriminating FRET.     

Molecular aptamers for real-time protein-protein interaction study

Protein-protein interactions play critical roles in cellular functions, but current techniques for real-time study of these interactions are limited. We report the real-time monitoring of protein-protein interactions without labeling either of the two interacting proteins; this procedure poses minimum effects on the binding properties of the proteins. Our strategy uses a protein/aptamer complex to probe the interactions in a competitive assay where the binding of an aptamer to its target protein is altered by a second protein that interacts with the target protein. Two signal transduction strategies, fluorescence resonance energy transfer (FRET) and fluorescence anisotropy, have been designed to study the interactions of human alpha-thrombin with different proteins by using two aptamers specific for two binding sites on alpha-thrombin. Our method has been shown to be simple and effective, does not require labeling of proteins, makes use of easily obtainable aptamers, provides detailed protein-protein interaction information and has excellent sensitivity for protein detection and protein-protein interaction studies. The FRET and the fluorescent anisotropy approaches complement each other in providing insight into the kinetics, mechanisms, binding sites and binding dynamics of the interacting proteins.     

FRET in a Synthetic Flavin‐ and Bilin‐binding Protein

The last decade has seen development and application of a large number of novel fluorescence‐based techniques that have revolutionized fluorescence microscopy in life sciences. Preferred tags for such applications are genetically encoded fluorescent proteins (FP), mostly derivatives of the green fluorescent protein (GFP). Combinations of FPs with wavelength‐separated absorption/fluorescence properties serve as excellent tools for molecular interaction studies, for example, protein–protein complexes or enzyme–substrate interactions, based on the FRET phenomenon (Förster resonance energy transfer). However, alternatives are requested for experimental conditions where FP proteins or FP couples are not or less efficiently applicable. We here report as a “proof of principle” a specially designed, non‐naturally occurring protein (LG1) carrying a combination of a flavin‐binding LOV‐ and a photochromic bilin‐binding GAF domain and demonstrate a FRET process between both chromophores.     

A 'turn-on' FRET peptide sensor based on the mercury binding protein MerP

A new fluorescent peptidyl chemosensor based on the mercury binding MerP protein with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl (acceptor), contains amino acids from MerP's metal binding loop (sequence: dansyl-Gly-Gly-Thr-Leu-Ala-Val-Pro-Gly-Met-Thr-Cys-Ala-Ala-Cys-Pro-Ile-Thr-Val-Lys-Lys-Gly-Gly-Trp-CONH(2)). A FRET enhancement or 'turn-on' response was observed for Hg(2+) as well as for Zn(2+), Cd(2+) and Ag(+) in a pure aqueous solution at pH 7.0. The emission intensity of the acceptor was used to monitor the concentration of these metals ions with detection limits of 280, 6, 103 and 496 microg L(-1), respectively. No response was observed for the other transition, alkali and alkaline earth metals tested. The fluorescent enhancement observed is unique for Hg(2+) since this metal generally quenches fluorescence. The acceptor fluorescence increase resulting from metal binding-induced FRET suggests a sensor that is inherently more sensitive than one based on quenching by the binding event.     

A novel design method of ratiometric fluorescent probes based on fluorescence resonance energy transfer switching by spectral overlap integral

A ratiometric measurement, namely, simultaneous recording of the fluorescence intensities at two wavelengths and calculation of their ratio, allows greater precision than measurements at a single wavelength, and is suitable for cellular imaging studies. Here we describe a novel method of designing probes for ratiometric measurement of hydrolytic enzyme activity based on switching of fluorescence resonance energy transfer (FRET). This method employs fluorescent probes with a 3'-O,6'-O-protected fluorescein acceptor linked to a coumarin donor through a linker moiety. As there is no spectral overlap integral between the coumarin emission and fluorescein absorption, the fluorescein moiety cannot accept the excitation energy of the donor moiety and the donor fluorescence can be observed. After cleavage of the protective groups by hydrolytic enzymes, the fluorescein moiety shows a strong absorption in the coumarin emission region, and then acceptor fluorescence due to FRET is observed. Based on this mechanism, we have developed novel ratiometric fluorescent probes (1-3) for protein tyrosine phosphatase (PTP) activity. They exhibit a large shift in their emission wavelength after reaction with PTPs. The fluorescence quenching problem that usually occurs with FRET probes is overcome by using the coumarin-cyclohexane-fluorescein FRET cassette moiety, in which close contact of the two dyes is hindered. After study of their chemical and kinetic properties, we have concluded that compounds 1 and 2 bearing a rigid cyclohexane linker are practically useful for the ratiometric measurement of PTPs activity. The design concept described in this paper, using FRET switching by spectral overlap integral and a rigid link that prevents close contact of the two dyes, should also be applicable to other hydrolytic enzymes by introducing other appropriate enzyme-cleavable groups into the fluorescein acceptor.     

Fluorescence energy transfer-sensitized photobleaching of a fluorescent label as a tool to study donor-acceptor distance distributions and dynamics in protein assemblies: studies of a complex of biotinylated IgM with streptavidin and aggregates of concanavalin A

A photokinetic method of detection of fluorescence resonance energy transfer (FRET) between special fluorescent labels is applied to study time-averaged spatial distribution of labeled proteins in protein assemblies. Prolonged irradiation of a sample at the absorption maximum of the energy donor initiates FRET-sensitized fluorescence photobleaching of the energy acceptor label, which was monitored by steady-state fluorimetric measurements. Kinetics of the acceptor photobleaching and kinetics of decreasing the efficiency of FRET from donors to unbleached acceptors were determined. The FRET efficiency was found from measuring sensitization of acceptor fluorescence. Analysis of the photokinetic data permits to estimate the time-averaged distribution of acceptors on donor-acceptor distances in the range of characteristic distances of FRET. Dynamic processes influencing donor-acceptor distances can be also investigated by the method. Application of the method is demonstrated by the studies of a complex of biotinylated IgM with streptavidin and aggregates composed of concanavalin A and sodium dodecyl sulphate. A new thiadicarbocyanine dye was used as the acceptor label. R-phycoerythrin and tetramethylrhodamine isothiocyanate were the donor labels. In the IgM-streptavidin complex, 16% of acceptors most contributed to FRET provided 90% of FRET efficiency, whereas acceptors made about the same time-averaged contribution to FRET in the concanavalin A aggregates.     

Steady-state fluorescence quenching applications for studying protein structure and dynamics

Fluorescence quenching methods are useful to obtain information about the conformational and/or dynamic changes of proteins in complex macromolecular systems. In this review steady-state methods are described and the data interpretation is thoroughly discussed. As a special case of fluorescence quenching mechanism, fluorescence resonance energy transfer (FRET) phenomenon is also presented. Application of a FRET based method to characterize the temperature dependence of the flexibility of protein matrix is clearly demonstrated.     

Gauging the flexibility of fluorescent markers for the interpretation of fluorescence resonance energy transfer

Intramolecular distances in proteins and other biomolecules can be studied in living cells by means of fluorescence resonance energy transfer (FRET) in steady-state or pulsed-excitation experiments. The major uncertainty originates from the unknown orientation between the optical dipole moments of the fluorescent markers, especially when the molecule undergoes thermal fluctuations in physiological conditions. We introduce a statistical method based on the von Mises-Fisher distribution for the interpretation of fluorescence decay dynamics in donor-acceptor FRET pairs that allows us to retrieve both the orientation and the extent of directional fluctuations of the involved dipole moments. We verify the method by applying it to donor-acceptor pairs controllably attached to DNA helices and find that common assumptions such as complete rotational freedom or fully hindered rotation of the dipoles fail a physical interpretation of the fluorescence decay dynamics. This methodology is applicable in single-molecule and ensemble measurements of FRET to derive more accurate distance estimates from optical experiments, without the need for more complex and expensive NMR studies.     

Fluorescence resonance energy transfer between green fluorescent protein and doxorubicin enabled by DNA nanotechnology

DNA nanotechnology is a rapidly growing research area, where DNA may be used for wide range of applications such as construction of nanodevices serving for large scale of diverse purposes. Likewise a panel of various purified fluorescent proteins is investigated for their ability to emit their typical fluorescence spectra under influence of particular excitation. Hence these proteins may form ideal donor molecules for assembly of fluorescence resonance emission transfer (FRET) constructions. To extend the application possibilities of fluorescent proteins, while using DNA nanotechnology, we developed nanoconstruction comprising green fluorescent protein (GFP) bound onto surface of surface active nanomaghemite and functionalized with gold nanoparticles. We took advantage of natural affinity between gold and thiol moieties, which were modified to bind DNA fragment. Finally we enclosed doxorubicin into fullerene cages. Doxorubicin intercalated in DNA fragment bound on the particles and thus we were able to connect these parts together. Because GFP behaved as a donor and doxorubicin as an acceptor using excitation wavelength for GFP (395 nm) in emission wavelength of doxorubicin (590 nm) FRET was observed. This nanoconstruction may serve as a double‐labeled transporter of doxorubicin guided by force of external magnetic force owing to the presence of nanomaghemite. Further nanomaghemite offers the possibility of using this technology for thermotherapy.