Effect of Ca and Sr alkaline earth ions on luminescence properties of BaAl12O19:Eu nanophosphor

Nanosized barium aluminate materials was doped by divalent cations (Ca²⁺, Sr²⁺) and Eu²⁺ having nominal compositions Ba_1−xMxAl₁₂O₁₉:Eu (M=Ca and Sr) (x=0.1-0.5), were synthesized by the combustion method. These phosphors were characterized by XRD, scanning electron microscopy-energy-dispersive spectrometry (SEM-EDS) and photoluminescence measurement. The photoluminescence characterization showed the presence of Eu ion in divalent form which gave emission bands peaking at 444 nm for the 320 nm excitation (solid-state lighting excitation), while for 254 nm it gave the same emission wavelength of low intensity (1.5 times) compared to 320 nm excitation. It was also observed that alkaline earth metal (Ca²⁺ and Sr²⁺) dopants increase the intensity of Eu²⁺ ion in BaAl₁₂O₁₉ lattice, thus this phosphor may be useful for solid-state lighting.     

White light emitting from single phased K2Ca1−x−yP2O7: xEu, yMn phosphors under UV excitation

A single phased white light emitting phosphors K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ were synthesized by solid state reaction method. The Effective energy transfer occurs in this phosphor due to the large spectral overlap between the emission of Eu²⁺ and the excitation of Mn²⁺. The emission hue of K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ from blue to white light can be obtained by tuning the Eu²⁺/Mn²⁺ content ratio. The energy transfer mechanism from Eu²⁺ to Mn²⁺ in this phosphor was carefully investigated and demonstrated to be via the dipole–quadrupole interaction.     

Photoluminescence properties of Sr1-xSi2O2N2: Eux as green to yellow-emitting phosphor for blue pumped white LEDs

This study evaluated potential applications of green to yellow-emitting phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) in blue pumped white light emitting diodes. Sr_1-xSi₂O₂N₂: Eu²⁺_x was synthesized at different Eu²⁺ doping concentrations at 1450 °C for 5 h under a reducing nitrogen atmosphere containing 5% H₂ using a conventional solid reaction method. The X-ray diffraction patterns of the prepared phosphor (Sr_1-xSi₂O₂N₂: Eu²⁺_x) were indexed to the SrSi₂O₂N₂ phase and an unknown intermediate phase. The photoluminescence properties of these phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) showed that the samples were excited from the UV to visible region due to the strong crystal field splitting of the Eu²⁺ ion. The emission spectra under excitation of 450 nm showed a bright color at 545-561 nm. The emission intensity increased gradually with increasing Eu²⁺ doping concentration ratio from 0.05 to 0.15. However, the emission intensity decreased suddenly when the Eu²⁺ concentration ratio was >0.2. As the doping concentration of Eu²⁺ was increased, there was a red shift in the continuous emission peak. These results suggest that Sr_1-xSi₂O₂N₂: Eu₂⁺_x phosphor can be used in blue-pumped white light emitting diodes.     

Ca1−xMo1−ySiyO4:Eux: A novel red phosphor for white light emitting diodes

Single phase of Ca_1−xMo_1−ySi_yO₄:Eu_x³⁺ (0.18?x?0.26, 0?y?0.04) was synthesized by solid-state method. The photoluminescence investigation indicated that Ca_1−xMoO₄:Eu_x³⁺ (0.18?x?0.26) could be effectively excited by 393 and 464 nm, and it exhibited an intense red emission at 615 nm. The introduction of Si⁴⁺ ions did not change the position of the peaks but strongly enhanced the emission intensity of Eu³⁺ under 393 and 464 nm excitations and showed very good color purity. The emission intensity of optimal Ca_0.8Mo_0.98Si_0.02O₄:Eu_0.2³⁺ sample (excited by 393 nm) was about 5.5 times higher than that of the phosphor Y₂O₂S:0.05Eu³⁺. So this phosphor could be nicely suitable for the application of the UV LED chips.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Control of luminescence and conductivity of delafossite-type CuYO2 by substitution of rare earth cation (Eu, Tb) and/or Ca cation for Y cation

Delafossite-type oxides of CuTb_yY_1−yO₂, CuEu_yY_1−yO₂, CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ have been prepared by solid state reactions. The lattice-parameter dependence on the composition implies substitution of the Tb³⁺, Eu³⁺ and Ca²⁺ cations for the Y³⁺ site. Noticeable sharp emission lines due to the f-f transitions (⁵D₄→⁷F_J, J=3-6) of Tb³⁺ or due to the f-f transitions (⁵D₀→⁷F_J, J=0-4) of Eu³⁺ are observed at room temperature. Electrical conductivities of CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ are larger than those of CuTb_yY_1−yO₂ and CuEu_yY_1−yO₂, indicating the increase of the hole concentration caused by the substitution of Ca²⁺ for the Y³⁺ site. These results indicate the controllability of the luminescence and conductivity in CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ delafossite-type oxides by simultaneous substitution of the rare earth Tb³⁺ or Eu³⁺ cation and the Ca²⁺ cation for the Y³⁺ site.     

High-temperature thermoelectric properties of Ca3Co4O9+δ with Eu substitution

We have prepared polycrystalline Ca_3−xEu_xCo₄O_9+δ (x=0, 0.15, 0.3 and 0.45) samples using a sol-gel process followed by SPS sintering and investigated the Eu substitution effects on their high-temperature thermoelectric properties. With the Eu substitution, both the electrical resistivity and thermopower increase monotonously. This could be attributed to the decrease of hole concentrations by substitution of trivalent Eu³⁺ for divalent Ca²⁺. The Eu substituted samples (x=0.15, x=0.3) have lower thermal conductivity than Ca₃Co₄O_9+δ due to their lower electronic and lattice thermal conductivity. The dimensionless figure of merit ZT reaches 0.3 at 1000 K for the sample of Ca_2.7Eu_0.3Co₄O_9+δ.     

Improved luminescent properties of red-emitting Ca0.54Sr0.16Eu0.08Gd0.12(MoO4)0.2(WO4)0.8 phosphor for LED application by charge compensation

The red-emitting Ca_0.54Sr_0.16Eu_0.08Gd_0.12(MoO₄)_0.2(WO₄)_0.8 phosphor is improved in the emission charateristics by charge compensation, of which chromaticity coordinates (CIE) are x=0.66 and y=0.33. Three approaches to charge compensation are investigated, namely (a) 3Ca²⁺/Sr²⁺→2Eu³⁺/Gd³⁺+vacancy, (b) 2Ca²⁺/Sr²⁺→Eu³⁺/Gd³⁺+M⁺(M⁺ is a monovalent cation like Li⁺, Na⁺ and K⁺ employed as a charge compensator) and (c) Ca²⁺/Sr²⁺→Eu³⁺/Gd³⁺+N⁻ (N⁻ is a monovalent anion like F⁻, Cl⁻, Br⁻ and I⁻ employed as charge compensation ions). Through photoluminescent spectra analyzing the radiative and non-radiative relaxation mechanisms of luminescent system are obtained. Under 20 mA forward-bias current, one red-emitting LED is made by combining 390-405 nm-emitting LED chip and the phosphor. The red-emitting phosphor has broad prospects in LED application field.     

Luminescence and chromaticity of alkaline earth aluminate MxSr1−xAl2O4:Eu (M: Ca,Ba)

In order to prepare fluorescent material for UV-LED used as illumination light source, two series of Eu²⁺ doped (1 mol%) alkaline earth aluminate phosphors Ca_xSr_1−xAl₂O₄ and Ba_xSr_1−xAl₂O₄ were prepared. The crystal structure, relative quantum efficiency(Qr), peak wavelength(λ_p), color tuning and chromaticity were investigated by XRD patterns and photoluminescence (PL) on samples prepared by solid solution system (s series) and powder mixing system (m series) respectively. For the s series, the synthesized Ca_xSr_1−xAl₂O₄:Eu²⁺ powders show that the structure transforms from monoclinic to hexagonal at x?0.5, and λ_p increases from 442.3 to 529.7 nm with decreasing x. For the Ba_xSr_1−xAl₂O₄:Eu²⁺ system, the structure transforms from monoclinic to hexagonal at x?0.3, and λ_p decreases from 520.5 to 502.2 nm continuously from x=0 to 1. The shift in λ_p could be explained by the crystal field effect, which is affected by different coulomb attractive forces due to the various fraction of alkaline earth cation in the host lattice. Different phosphor properties prepared by either solid solution or powder mixing methods were characterized by chromaticity measurements for both reflective and transmissive modes.     

Luminescent properties of stabled hexagonal phase Sr1−xBaxAl2O4:Eu (x=0.37-0.70)

Stabled hexagonal phase Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) was prepared by solid-state method. Result revealed that the structure behavior of the SrAl₂O₄:Eu²⁺ calcined at 1350 °C in a reducing atmosphere for 5 h strongly depended on the Ba²⁺ concentration. With increasing Ba²⁺ concentration, a characteristic hexagonal phase can be observed. When 37-70% of the strontium is replaced by barium, the structure of the prepared sample is pure hexagonal. Photoluminescence and excitation spectra of the samples with different x and doped with 2% Eu²⁺ were investigated. Changes in the emission spectra were observed in the two different phases. The green emission at 505 nm from Eu²⁺ was found to be quite strong in the hexagonal phase. The intensity and peak position of the green luminescence from Eu²⁺ changed with increasing content of Ba²⁺. The strongest green emission was obtained from Sr_0.61Ba_0.37Al₂O₄:Eu²⁺. The decay characteristics of Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) showed that the life times also varied with the value of x. Furthermore, the emission colors and decay times varying with x could be ascribed to the variation of crystal lattice.     

Photoluminescence in MgxSr1−xAl2O4:Eu, Ndand electron-vibrational interaction in the Eu 5d states

Green phosphor compositions Mg_xSr_1−xAl₂O₄:Eu, Nd (with x=0.05-0.25) were prepared by solid state reaction method. The effect of Mg substitution on photoluminescence characteristics was investigated. The photoluminescence show intense green emission for MgSrAl₂O₄:Eu²⁺, Nd³⁺ with long persistence. This green emission corresponds to transitions from 4f⁶5d¹ to 4f⁷ of Eu²⁺ ion. Comparative analysis of the excitation and emission spectra were used to evaluate the crystal field splitting of the 5d states of Eu²⁺ and the parameters of electron-vibrational interaction, such as Huang-Rhys factor, effective phonon energy, and zero-phonon line position.     

Luminescent properties of KGd1−x(WO4)2:Eux and KGd1−x(WO4)2−y(MoO4)y:Eux phosphors in UV-VUV regions

KGd_1−x(WO₄)_2−y(MoO₄)_y:Eu³⁺_x(0.1?x?0.75, y=0 and 0.2) phosphors are synthesized through traditional solid-state reaction and their luminescent properties in ultraviolet (UV) and vacuum ultraviolet (VUV) regions are investigated. Under 147 nm excitation, these phosphors show characteristic red emission with good color purity. In order to improve their emission intensity, the MoO₄²⁻ (20 wt%) is introduced into the anion of KGd_1−x(WO₄):Eu³⁺_x. The Mo⁶⁺ and Eu³⁺ co-doped KGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped KGd(WO₄)₂ in VUV region. The chromaticity coordination of KGd_0.45(WO₄):Eu³⁺_0.55 is (x=0.669, y=0.331), while that of KGd_0.45(WO₄)_1.8(MoO₄)_0.2:Eu³⁺_0.55 is (x=0.666, y=0.334) in VUV region.     

Synthesis, structure and luminescence properties of Y(V,P)O4:Eu,Bi phosphors

YVO₄:Eu³⁺-based red-emitting phosphors with the compositions of Y_0.95−xVO₄:0.05Eu³⁺,xBi³⁺ (x=0.01, 0.03, 0.05, 0.07 and 0.09) and Y_0.90(V_1−zP_z)O₄:0.05Eu³⁺,0.05Bi³⁺ (z=0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1.0) were synthesized by the high temperature solid-state method. The as-prepared phosphors have the similar tetragonal phase structure and their morphologies varied with the relative content ratio of V to P. The photoluminescence spectra for the as-synthesized phosphors show that a dominant red emission line at around 619 nm, which is due to the Eu³⁺ electric dipole transition of ⁵D₀-⁷F₂, is observed under different excitation wavelengths (254 and 365 nm). Further, the emission intensities of ⁵D₀-⁷F₂ transition upon 365 nm excitation increase sharply owing to the Bi³⁺ doping. Energy transfer process, luminescent lifetime and quantum efficiency for the selected Y_0.90(V_1−yP_y)O₄:0.05Eu³⁺,xBi³⁺phosphors were also studied in detail.     

Synthesis and luminescence properties of europium doped YBa3B9O18

Europium (Eu³⁺) doped YBa₃B₉O₁₈ were synthesized by conventional solid state solidification methods. (Y_1−xEu_x)Ba₃B₉O₁₈ formed solid solutions in the range of x=0–1.0. The luminescence property measurements upon excitation in ultraviolet–visible range show well-known Eu³⁺ excitation and emission. The charge transfer excitation band of Eu³⁺ dominates the excitation spectra. The emission spectrum of Eu³⁺ ions consists mainly of several groups of lines in the 550–720 nm region, due to the transitions from the ⁵D₀ level to the levels ⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions. The dependence of luminescence intensity on Eu³⁺ concentration shows no concentration quenching for fully concentrated EuBa₃B₉O₁₈. Eu³⁺ doped YBa₃B₉O₁₈ are promising phosphors for applications in displays and optical devices.     

Synthesis and luminous characteristics of Ba2MgSi2−xAlxO7: 0.1Eu, 0.1Mn phosphor for WLED

The shift of the emission band to longer wavelength (yellow-orange) of the Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺ phosphor under the 350-450 nm excitation range has been achieved by adding the codoping element (Mn²⁺) in the host. The single-host silicate phosphor for WLED, Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺, 0.1Mn²⁺ was prepared by high-temperature solid-state reaction. It was found experimentally that, its three-color emission peaks are situated at 623, 501 and 438 nm, respectively, under excitation of 350-450 nm irradiation. The emission peaks at 438 and 501 nm originate from the transition 5d to 4f of Eu²⁺ ions that occupy the two Ba²⁺ sites in the crystal of Ba₂MgSi_2−x Al_xO₇, while the 623 nm emission is attributed to the energy transfer from Eu²⁺ ions to Mn²⁺ ions. The white light can be obtained by mixing the three emission colors of blue (438 nm), green (501 nm) and red (623 nm) in the single host. When the concentrations of the Al³⁺, Eu²⁺ and Mn²⁺ ions were 0.4, 0.1 and 0.1 mol, respectively, the sample presented intense white emission. The addition of Al ion to the host leads to a substantial change of intensity ratio between blue and green emissions. White light could be obtained by combining this phosphor with 405 nm light-emitting diodes. The near-ultraviolet GaN-based Ba₂MgSi_1.7 Al_0.3O₇: 0.1Eu²⁺, 0.1Mn²⁺ LED achieves good color rendering of over 85.     

Novel blue-emitting phosphor Sr2.979Eu0.021Al10−xBxSiO20 (x=0, 0.25, 0.5, 0.75 and 1) for PDP applications

A series of blue-emitting phosphor Sr_3−xEu_xAl₁₀SiO₂₀ (x=0-0.025, insteps of 0.0025) have been synthesized and the emission intensity is found to be maximum for x=0.02. The effect of boron substitution in the Al site in Sr₃Al₁₀SiO₂₀:Eu²⁺ phosphor has been investigated to improve the blue emission of Eu²⁺. A series of boron-substituted compositions have been made Sr_2.979Eu_0.021Al_10−xB_xSiO₂₀ (x=0, 0.25, 0.5, 0.75 and 1) and studied their photoluminescence (PL) property under UV and VUV excitation. The X-ray diffraction patterns of Sr_2.979Eu_0.021Al_10−xB_xSiO₂₀ (x=0, 0.25, 0.5, 0.75 and 1) show single phase formation and all the compositions crystallize in monoclinic structure with space group C2/m. Blue emission (due to Eu²⁺ ion) has been found in all compositions and the emission intensity is found to be maximum for x=0.25 and it is ∼2 times higher than that of x=0 composition (PL intensity 62% vs. commercial BAM). Hence, this phosphor could be possible potential candidate for blue light-emitting phosphor for plasma display panel (PDP) applications.     

Luminescence properties of Eu(II)-borates and Eu2+- activated Sr-Borates

The luminescence properties of Eu(II)-borates and Eu²⁺-activated Sr-borates were studied, e.g. Sr_1?xEu_xB₂O₄Sr_1?xEu_xB₄O₇ and Sr_1?xEu_xB₆O₁₀. It was found that Sr_1?xEu_xB₄O₇ consisting of a three-dimensional network of BO₄ tetrahedra gave a remarkably stronger emission than the other compound consisting of BO^3-₃ ions, B₂O^4-₅ ions, (BO₂)∞ chains or a (B₃O₅)∞ network. This was understood by considering their crystallographic properties and with help of the Dexter theory.     

Preparation and luminescent properties of BaCa2Si3O9:Eu

A blue emitting phosphor of the triclinic BaCa₂Si₃O₉:Eu²⁺ was prepared by the combustion-assisted synthesis method and an efficient blue emission ranging from the ultraviolet to visible was observed. The luminescence and crystallinity were investigated using luminescence spectrometry and X-ray diffractometry (XRD), respectively. The emission spectrum shows a single intensive band centered at 445 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The excitation spectrum is a broad extending from 260 to 450 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in BaCa₂Si₃O₉:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole-dipole interaction. The CIE of the optimized sample Ba_0.95Ca₂Si₃O₉:Eu_0.05²⁺ was (x, y)=(0.164, 0.111). The result indicates that BaCa₂Si₃O₉:Eu²⁺ can be potentially useful as a UV radiation-converting phosphor for white light-emitting diodes (LEDs).     

A novel UV-emitting phosphor: Li6CaB3O8.5:Pb

Pure Li₆CaB₃O_8.5 and Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) materials were prepared by a solution combustion synthesis method. The phase of synthesized materials was determined using the powder XRD and FTIR. The synthesized materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of the synthesized phosphors were observed at 307 and 268 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for the Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) was studied and observed that the optimum concentration of Pb²⁺ in phosphor is 0.01 mol. The Stokes shift of the synthesized phosphor was calculated to be 4740 cm^-1.     

Synthesis and luminescence behavior of Eu-doped CaF2 nanoparticles

Luminescent Ca_1−xF_2+x:Eu_x nanoparticles were synthesized by a chemical co-precipitation method in an ethanol solution. The Ca_1−xF_2+x:Eu_x nanoparticles exhibit a sphere-like morphology with particle diameter of about 15-20 nm. With increasing concentration of Eu³⁺ ion the intensity of XRD diffraction peaks decreased significantly and full width at half-maximum of the peaks increased gradually, which indicated that more Eu³⁺ ions resulted in the increase of structural defects. The emission spectrum of Ca_1−xF_2+x:Eu_x nanoparticles consisted of a few narrow, sharp lines corresponding to Eu³⁺ ions. The luminescence intensity of Ca_1−xF_2+x:Eu_x nanoparticles increased with increasing concentration of Eu³⁺ ion and reached a maximum at approximately 15 mol%.