Surviving High‐Temperature Calcination: ZrO2‐Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂O₃ is a promising photoanode material, and producing morphologies that withstand high‐temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high‐temperature solid‐state reaction converts FeOOH‐ZrO₂ nanorods to ZrO₂‐induced Fe₂O₃ nanotubes (Zr‐Fe₂O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm⁻² at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co‐catalysts. Furthermore, a Co‐Pi decorated Zr‐Fe₂O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm⁻² (at 1.23 V vs. RHE).     

Fuel‐Free Bio‐photoelectrochemical Cells Based on a Water/Oxygen Circulation System with a Ni:FeOOH/BiVO4 Photoanode

A bio‐photoelectrochemical cell (BPEC) based on a fuel‐free self‐circulation water–oxygen–water system was fabricated. It consists of Ni:FeOOH modified n‐type bismuth vanadate (BiVO₄) photoanode and laccase catalyzed biocathode. In this BPEC, irradiation of the photoanode generates photocurrent for photo‐oxidation of water to oxygen, which is reduced to water again at the laccase biocathode. Of note, the by‐products of two electrode reactions could continue to be reacted, which means the H₂O and O₂ molecules are retained in an infinite loop of water–oxygen–water without any sacrificial chemical components. As a result, the assembled fuel‐free BPEC exhibits good performance with an open‐circuit potential of 0.97 V and a maximum power density of 205 μW cm^?2 at 0.44 V. This BPEC based on a self‐circulation system offers a fuel‐free model to enhance multiple energy conversion and application in reality.     

Stable Cocatalyst-Free BiVO4 Photoanodes with Passivated Surface States for Photocorrosion Inhibition

Improving charge transport and reducing bulk/surface recombination can increase the activity and stability of BiVO₄ for water oxidation. Herein we demonstrate that the photoelectrochemical (PEC) performance of BiVO₄ can be significantly improved by potentiostatic photopolarization. The resulting cocatalyst-free BiVO₄ photoanode exhibited a record-high photocurrent of 4.60 mA cm⁻² at 1.23 V_RHE with an outstanding onset potential of 0.23 V_RHE in borate buffer without a sacrificial agent under AM 1.5G illumination. The most striking characteristic was a strong “self-healing” property of the photoanode, with photostability observed over 100 h under intermittent testing. The synergistic effects of the generated oxygen vacancies and the passivated surface states at the semiconductor–electrolyte interface as a result of potentiostatic photopolarization reduced the substantial carrier recombination and enhanced the water oxidation kinetics, further inhibiting photocorrosion.     

Synthesis of mesoporous functional hematite nanofibrous photoanodes by electrospinning

Iron(III) oxide (hematite, Fe₂O₃) nanofibers, as visible light‐induced photoanode for water oxidation reaction of a water splitting process, were fabricated through electrospinning method followed by calcination treatment. The prepared samples were characterized with scanning electron microscopy, and three‐electrode galvanostat/potentiostat for evaluating their photoelectrochemical (PEC) properties. The diameter of the as‐spun fibers is about 300 nm, and calcinated fibers have diameter less than 110 nm with mesoporous structure. Optimized multilayered electrospun α‐Fe₂O₃ nanostructure mats showed photocurrent density of 0.53 mA/cm² under dark and visible illumination conditions at voltage 1.23 V and constant intensity (900 mW/cm²). This photovoltaic performance of nanostructure mats makes it suitable choice for using in the PEC water splitting application as an efficient photoanode. This method, if combined with appropriate flexible conductive substrate, has the potential for producing flexible hematite solar fuel generators. Copyright © 2015 John Wiley & Sons, Ltd.     

Self‐powered Photoelectrochemical Sensor for Gallic Acid Exploiting a CdSe/ZnS Core‐shell Quantum Dot Sensitized TiO2 as Photoanode

Herein is described the development of a self‐powered sensor for gallic acid (GA) determination exploiting CdSe/ZnS quantum dot sensitized TiO₂ nanoparticles (CdSe/ZnS/TiO₂/FTO) as photoanode and an all copper oxide photocathode (CuO/Cu₂O/FTO) to reduce water. A two‐chamber self‐powered photoelectrochemical cell was employed in order to maintain separated the photoelectrodes. The self‐powered photoelectrochemical cell is based on water reduction in the cathodic chamber while gallic acid acts as a hole scavenger in the anodic chamber to generate the necessary cell output to drive GA oxidation in the anodic compartment. Electrochemical impedance measurements were performed to evaluate the electronic characteristics of CdSe/ZnS/TiO₂/FTO photoanode and CuO/Cu₂O/FTO photocathode in terms of flat band potential, carrier density, and nature of semiconductor. Under optimized conditions, the self‐powered photoelectrochemical cell presented a wide linear response range for GA from 1 μmol L⁻¹ up to 200 μmol L⁻¹.     

Magnetite colloidal nanocrystals: a facile pathway to prepare mesoporous hematite thin films for photoelectrochemical water splitting

In this study, we demonstrate an alternative and promising way to produce hematite photoanodes with high performance and without the addition of doping or catalytic coating. In this approach, we processed hematite thin films using a colloidal dispersion of magnetite nanocrystals as the precursor. The photoelectrochemical characterization shows that the colloidal approach used to process an undoped hematite photoanode produced a high-performance electrode for water photooxidation with an onset potential as low as 0.8 V(RHE). This value is comparable to the best results reported in the literature for a hematite photoanode modified with catalytic materials. We demonstrate that pure hematite thin films reach 1.1 mA·cm(-2) at 1.23 V(RHE) with back-side illumination.     

A Photoelectrochemical Solar Cell Consisting of a Cadmium Sulfide Photoanode and a Ruthenium–2,2′‐Bipyridine Redox Shuttle in a Non‐aqueous Electrolyte

A photoelectrochemical (PEC) cell consisting of an n‐type CdS single‐crystal electrode and a Pt counter electrode with the ruthenium–2,2′‐bipyridine complex [Ru(bpy)₃]^2+/3+ as the redox shuttle in a non‐aqueous electrolyte was studied to obtain a higher open‐circuit voltage (V_OC) than the onset voltage for water splitting. A V_OC of 1.48 V and a short‐circuit current (I_SC) of 3.88 mA cm^?2 were obtained under irradiation by a 300 W Xe lamp with 420–800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo‐irradiated n‐type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one‐electron transfer was thought to have contributed to the high V_OC and I_SC. The obtained V_OC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis.     

Ultra‐Narrow Depletion Layers in a Hematite Mesocrystal‐Based Photoanode for Boosting Multihole Water Oxidation

Significant charge recombination that is difficult to suppress limits the practical applications of hematite (α‐Fe₂O₃) for photoelectrochemical water splitting. In this study, Ti‐modified hematite mesocrystal superstructures assembled from highly oriented tiny nanoparticle (NP) subunits with sizes of ca. 5 nm were developed to achieve the highest photocurrent density (4.3 mA cm^?2 at 1.23 V vs. RHE) ever reported for hematite‐based photoanodes under back illumination. Owing to rich interfacial oxygen vacancies yielding an exceedingly high carrier density of 4.1×10²¹ cm^?3 for super bulk conductivity in the electrode and a large proportion of ultra‐narrow depletion layers (<1 nm) inside the mesoporous film for significantly improved hole collection efficiency, a boosting of multihole water oxidation with very low activation energy (E_a=44 meV) was realized.     

Size‐Dependence of the Activity of Gold Nanoparticle‐Loaded Titanium(IV) Oxide Plasmonic Photocatalyst for Water Oxidation

Mesoporous TiO₂ nanocrystalline film was formed on fluorine‐doped tin oxide electrode (TiO₂/FTO) and gold nanoparticles (NPs) of different sizes were loaded onto the surface with the loading amount kept constant (Au/TiO₂/FTO). Visible‐light irradiation (λ>430 nm) of the Au/TiO₂/FTO photoanode in a photoelectrochemical cell with the structure of photoanode|0.1 m NaClO4 aqueous solution|Ag/AgCl (reference electrode)|glassy carbon (cathode) leads to the oxidation of water to oxygen (O₂). We show that the visible‐light activity of the Au/TiO₂/FTO anode increases with a decrease in Au particle size (d) at 2.9≤d≤11.9 nm due to the enhancement of the charge separation and increasing photoelectrocatalytic activity.     

Highly Active GaN‐Stabilized Ta3N5 Thin‐Film Photoanode for Solar Water Oxidation

Ta₃N₅ is a very promising photocatalyst for solar water splitting because of its wide spectrum solar energy utilization up to 600 nm and suitable energy band position straddling the water splitting redox reactions. However, its development has long been impeded by poor compatibility with electrolytes. Herein, we demonstrate a simple sputtering‐nitridation process to fabricate high‐performance Ta₃N₅ film photoanodes owing to successful synthesis of the vital TaO_δ precursors. An effective GaN coating strategy is developed to remarkably stabilize Ta₃N₅ by forming a crystalline nitride‐on‐nitride structure with an improved nitride/electrolyte interface. A stable, high photocurrent density of 8 mA cm⁻² was obtained with a CoPi/GaN/Ta₃N₅ photoanode at 1.2 V_RHE under simulated sunlight, with O₂ and H₂ generated at a Faraday efficiency of unity over 12 h. Our vapor‐phase deposition method can be used to fabricate high‐performance (oxy)nitrides for practical photoelectrochemical applications.     

Unraveling the role of Ti_3C_2 MXene underlayer for enhanced photoelectrochemical water oxidation of hematite photoanodes

Hematite is regarded as a promising photoanode for photoelectrochemical(PEC) water splitting.However,the charge recombination occurred at the interface of FTO/hematite strictly limits the PEC performance of hematite.Herein,we reported a Ti3C2 MXene underlayer modified hematite(Ti-Fe2O3) photoanode via a simple drop-casting followed by hydrothermal and annealing processes.Owing to the bifunctional role of Ti3C2 MXene underlayer in improving the interfacial properties of FTO/hematite and providing Ti source for the construction of Fe2 TiO5/Fe2O3 heterostructure in hematite nanostructure,the bulk and interfacial charge transfer dynamics of hematite are significantly enhanced,and consequently enhancing the PEC performance.Compared with the pristine hematite,the as-prepared Ti-Fe2O3 photoanode shows an increased photocurrent density from 0.80 mA/cm² to 1.30 mA/cm² at 1.23 V vs.RHE.Moreover,a further promoted PEC performance including a dramatically increased photocurrent density of 2.49 mA/cm² at1.23 V vs.RHE and an obviously lowered onset potential is achieved for the Ti-Fe2O3 sample after the subsequent surface F-treatment and the loading of FeNiOOH cocatalyst.Such results suggest that the introduction of Ti3C2 MXene underlayer is a facile but effective approach to improve the PEC water splitting activity of hematite.     

The Role of Surface States in the Oxygen Evolution Reaction on Hematite

Hematite (α‐Fe₂O₃) is an extensively investigated semiconductor for photoelectrochemical (PEC) water splitting. The nature and role of surface states on the oxygen evolution reaction (OER) remain however elusive. First‐principles calculations were used to investigate surface states on hematite under photoelectrochemical conditions. The density of states for two relevant hematite terminations was calculated, and in both cases the presence and the role of surface states was rationalized. Calculations also predicted a Nerstian dependence on the OER onset potential on pH, which was to a very good extent confirmed by PEC measurements on hematite model photoanodes. Impedance spectroscopy characterization confirmed that the OER takes place via the same surface states irrespective of pH. These results provide a framework for a deeper understanding of the OER when it takes place via surface states.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

Efficient Hole Extraction from a Hole‐Storage‐Layer‐Stabilized Tantalum Nitride Photoanode for Solar Water Splitting

One of the major hurdles that impedes the practical application of photoelectrochemical (PEC) water splitting is the lack of stable photoanodes with low onset potentials. Here, we report that the Ni(OH)_x/MoO₃ bilayer, acting as a hole‐storage layer (HSL), efficiently harvests and stores holes from Ta₃N₅, resulting in at least 24 h of sustained water oxidation at the otherwise unstable Ta₃N₅ electrode and inducing a large cathodic shift of ≈600 mV in the onset potential of the Ta₃N₅ electrode.     

Boosting the Photoactivity of BiVO4 Photoanodes by a ZnCoFe-LDH Thin Layer for Water Oxidation

Monoclinic bismuth vanadate (BiVO₄) has been used as an efficient photoanode material for photoelectrochemical water oxidation owing to its suitable band gap and nontoxicity. Nevertheless, the practical application of BiVO₄ photoanode has been severely limited by the surface charge recombination and sluggish kinetic, which leads to the obtained photoactivity of BiVO₄ is much lower than its theoretical value. In this case, ZnCoFe-LDH thin layer is conformally decorated on the porous BiVO₄ photoanode through a simple electrodeposition process. The results show that a boosted photoactivity and a remarkably enhanced photocurrent density (3.43 mA cm⁻² at 1.23 V_RHE) are attained for BiVO₄/ZnCoFe-LDH. In addition, the optimized BiVO₄/ZnCoFe-LDH photoanode exhibits significant negative shift in the onset potential (0.51 V_RHE to 0.21 V_RHE), promotes charge separation efficiency (49.3% to 60.4% in the bulk, 29.6% to 61.9% on the surface at 1.23 V_RHE) and enhanced IPCE efficiency (25.5% to 54.7% at 425 nm) compared with that of bare BiVO₄ photoanode. It is demonstrated that the boosted photoactivity of BiVO₄/ZnCoFe-LDH photoanode is mainly ascribed to the synergy effects of the formation of p-n heterojunction between ZnCoFe-LDH and BiVO₄ to accelerate the photogenerated charge transfer and separation, broaden light absorption, as well as promote the surface water oxidation kinetics.     

Rationally designed/constructed MnOx/WO3 anode for photoelectrochemical water oxidation

The activity of WO₃ photoanode could be improved efficiently after loading MnO_x by photodeposition. The maximum photocurrent density of composite photoanode is achieved with a deposition time of 3 min, which is higher than that of pristine WO₃ photoanode around 40%.     

A co-activation strategy for enhancing the performance of hematite in photoelectrochemical water oxidation

Hematite(α-Fe_2O_3) is a promising photoanode for photoelectrochemical(PEC) water splitting.However,the severe charge recombination and sluggish water oxidation kinetics extremely limit its use in photohydrogen conversion.Herein,a co-activation strategy is proposed,namely through phosphorus(P)doping and the loading of CoAl-layered double hydroxides(CoAl-LDHs) cocatalysts.Unexpectedly,the integrated system,CoAl-LDHs/P-Fe_2O_3 photoanode,exhibits an outstanding photocurrent density of 1.56 mA/cm~2 at 1.23 V(vs.reversible hydrogen electrode,RHE),under AM 1.5 G,which is 2.6 times of pureα-Fe_2O_3.Systematic studies reveal that the remarkable PEC performance is attributed to accelerated surface OER kinetics and enhanced carrier separation efficiency.This work provides a feasible strategy to enhance the PEC performance of hematite photoanodes.     

Understanding the Roles of Oxygen Vacancies in Hematite‐Based Photoelectrochemical Processes

Oxygen vacancy (V_O) engineering is an effective method to tune the photoelectrochemical (PEC) performance, but the influence of V_O on photoelectrodes is not well understood. Using hematite as a prototype, we herein report that V_O functions in a more complicated way in PEC process than previously reported. Through a comprehensive analysis of the key charge transfer and surface reaction steps in PEC processes on a hematite photoanode, we clarify that V_O can facilitate surface electrocatalytic processes while leading to severe interfacial recombination at the semiconductor/electrolyte (S‐E) interface, in addition to the well‐reported improvements in bulk conductivity. The improved bulk conductivity and surface catalysis are beneficial for bulk charge transfer and surface charge consumption while interfacial charge transfer deteriorates because of recombination through V_O‐induced trap states at the S‐E interface.     

Prospects of electrochemically synthesized hematite photoanodes for photoelectrochemical water splitting: A review

Hematite (α-Fe₂O₃) is found to be one of the most promising photoanode materials used for the application in photoelectrochemical (PEC) water splitting due to its narrow band gap energy of 2.1 eV, which is capable to harness approximately 40% of the incident solar light. This paper reviews the state-of-the-art progress of the electrochemically synthesized pristine hematite photoanodes for PEC water splitting. The fundamental principles and mechanisms of anodic electrodeposition, metal anodization, cathodic electrodeposition and potential cycling/pulsed electrodeposition are elucidated in detail. Besides, the influence of electrodeposition and annealing treatment conditions are systematically reviewed; for examples, electrolyte precursor composition, temperature and pH, electrode substrate, applied potential, deposition time as well as annealing temperature, duration and atmosphere. Furthermore, the surface and interfacial modifications of hematite-based nanostructured photoanodes, including elemental doping, surface treatment and heterojunctions are elaborated and appraised. This review paper is concluded with a summary and some future prospects on the challenges and research direction in this cutting-edge research hotspot. It is anticipated that the present review can act as a guiding blueprint and providing design principles to the scientists and engineers on the advancement of hematite photoanodes in PEC water splitting to resolve the current energy- and environmental-related concerns.     

Understanding Surface Recombination Processes Using Intensity-Modulated Photovoltage Spectroscopy on Hematite Photoanodes for Solar Water Splitting

Converting solar energy into hydrogen through photoelectrochemical (PEC) water splitting offers a promising route towards a fully renewable energy economy. A fundamental understanding of photogenerated charge recombination processes in semiconducting photoelectrodes is a key consideration in optimizing solar water splitting cells and intensity-modulated photovoltage spectroscopy (IMVS) has recently emerged as a promising technique for gaining new insight. However, the interpretation of IMVS data under various conditions (that is, when photoelectrodes are in sacrificial electrolytes or employ catalytic overlayers) is not complete. Using IMVS data we present herein an analysis of charge recombination processes under open circuit conditions on a model photoanode system: nanostructured hematite. Employing two sacrificial oxidation conditions compared to standard water oxidation conditions, our IMVS results establish a direct correlation between surface recombination processes and the low frequency IMVS response. We found that surface intermediate states for water oxidation under open circuit condition exhibit a lifetime of 229 ms under standard illumination conditions. Applying a nickel iron oxide overlayer also gives insight into surface passivation effects through IMVS analysis of photoanode system.