Carrier diffusion in InGaAs/GaAs quantum wells grown on vicinal GaAs(0 0 1) substrates

We have investigated the influence of vicinal GaAs substrates on the optical and electronic properties of InGaAs/GaAs quantum wells (QWs). A single In_0.10Ga_0.90As QW was grown by molecular-beam epitaxy on a vicinal GaAs(0 0 1) substrate with a miscut angle of 0° (nominal), 2°, 4° and 6° towards [1 1 0]. The carrier diffusion was obtained by a micro-photoluminescence scan technique that permits to observe the effective diffusion length characterized by the lateral spread of carriers in the QW followed by radiative recombination. The carrier diffusion length was obtained parallel (L_||) and perpendicular (L) to the atomic steps. The diffusion length decreases as the temperature increases up to 100 K. Above this temperature we found different behaviours that depend on the sample miscut angle.     

Two-plane sub-bundles of nonorientable real vector-bundles

Let be a nonorientable m-plane bundle over a CW complex X of dimension m or less. Given a 2-plane bundle over X, we wish to know whether can be embedded as a sub-bundle of . The bundle need not be orientable. When is even-dimensional there is the added complication of twisted coefficients. In that case, we use Postnikov decomposition of certain nonsimple fibrations in order to describe the obstructions for the embedding problem. Emery Thomas [11] and [12] treated this problem for and both orientable. The results found here are applied to the tangent bundle of a closed, connected, nonorientable smooth manifold, as a special case.The writing of this paper was partially supported by CNPq grant     

Behavior of Humic Acid as a Micellar Phase in Micellar Electrokinetic Chromatography (MEKC)

The possibility of humic acids acting as micellar phase in micellar electrokinetic chromatography was evaluated. We investigated the separation of naphthalene in capillary electrophoresis using various samples of humic acids as micellar phase under different pH conditions, concentrations of humic acid, and temperature. The humic acid samples studied were from different origins including peat, vermicompost and a commercial sample acquired from Aldrich. Methanol was used as a marker for the electroosmotic flow. The results indicate that the formation of micelle depends on the number and nature of the hydrophobic association sites in an aqueous humic acid solution and on the origin and concentration of the humic acid at a defined pH. At lower pH values, the possibility of the humic acid molecule forming pseudomicelles increases due to a combination of neutralized and dissociated charged sites.     

Photochemical decomposition of the CS2N3 ion

The pseudo-halide 1, 2, 3, 4-thiatriazol-5-thiolate, in the anion and acid forms, undergoes photochemical decomposition with the formation of sulfur, nitrogen and the thiocyanate anion, with quantum yields (θ₃₁₃) of 0.13 and 0.26 for the acid and anion forms, respectively.     

Synthesis of Ultra-Fine Columbite Powder MgNb2O6 by the Polymerized Complex Method

Pure MgNb₂O₆ powders with high specific surface area and high crystallinity have been successfully synthesized by the Polymerized Complex (PC) Method. A solution of water, citric acid, ethylene glycol and niobium and magnesium ions, was polymerized at 130°C by the water elimination and was calcined at 400°C for 2 h. The precursor formed was calcined at temperatures from 700°C to 1000°C in air to obtain the columbite phase. Thermal analysis, Raman spectroscopy, x-ray diffraction, adsorption/desorption hysteresis and scanning electron microscopy were used to investigate the polymer decomposition and the columbite phase evolution. No evidence for phase separation of crystalline MgCO₃ and Nb₂O₅ in Raman spectra and x-ray diffraction pattern as distinct intermediates were found, and the MgNb₂O₆ probably is formed through a single-step decomposition of oxycarbonate intermediate, as other double oxide synthesized by the PC Method, as indicated by the thermal decomposition of the precursor.     

Synthesis and Cytotoxic Activity of 4-Substituted 3-Cyano-6,6-dimethyl-5,6-dihydro-2-pyranones

The respective 4-(arylvinyl)lactones and compounds of the Michael adduct type were synthesized by the condensation of substituted benzaldehydes with 3-cyano-4,6,6-trimethyl-5,6-dihydro-2-pyranone in the presence of catalytic amounts of sodium hydroxide. It was shown by the semiempirical AM1 method that the indicated products can be formed through one and the same intermediate compound. Some of the synthesized phenylvinyl-5,6-dihydro-2-pyranones have a cytotoxic effect, and this corresponds to the prognosis of the OREX expert system.     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

Spectrophotometric and derivative spectrophotometric determination of aluminium with Hydroxynaphthol Blue

The reaction of aluminium(III) with Hydroxynaphtol Blue (HNB) in aqueous media at apparent pH 5.5 results in a red complex that is stable for at least 4 hr. Beer's Law is obeyed up to 1.6 microg/ml of aluminium(III) with an apparent molar absorptivity of 1.66 x 10(4) l.mol(-1). cm(-1) at 569 nm. This paper proposes procedures for aluminium(III) determination by ordinary and first-derivative spectrophotometry. The results demonstrated that the linear dynamic range is 0.03-1.60 microg/ml for ordinary spectrophotometry and 11.8-320.0 ng/ml for first derivative spectrophotometry. The HNB is not selectivity for aluminium, but the addition of EDTA allows the aluminium determination in the presence of accepted amounts of Ca(II), Mg(II), Mn(II), Ba(II), Sr(II), Cd(II), Pb(II), La(III), In(III), Bi(III) and Zn(II). The interference of Cu(II) and Hg(II) can be masked by thiosulphate. Ions such as UO(2)(II), Mo(VI), Co(II), Ti(IV) and PO(4)(III) do interfere seriously. This method was applied for aluminium determination in copper-base alloy, zinc-base alloy, magnesium-base alloy, iron ore, manganese ore, cement, dolomite, feldspar and limestone. The results indicated high accuracy and precision.     

Slow-Release Nutrient Capsules for Microorganism Stimulation in Oil Remediation

As the concern towards environmental deterioration grows worldwide, new technological achievements become essential for all countries. Among the technologies with great potential of bioremediation is microencapsulation of active material. Several studies have investigated the use of controlled release of active materials as a way of biostimulation and supplying the nutrients necessary for the bioremediation process. In fact, as the use of microorganisms has a great potential in degrading crude oils, this work aims to use that technology and to associate it to produce controlled-release capsules of nitrogen, phosphorus, and potassium (N, P, and K) for bioremediation purposes. For the capsule formulation, polymers of sodium alginate, Capsul®, and the commercial fertilizer NPK from Sempre Verde Inc. were used. Crude oil was the only carbon source and mineral medium for microorganism growth. Controlled-release nutrient capsules, with 4 mm in diameter, made of 3.0 % alginate (w/v) and 4.0 % Capsul® (w/v) were produced. Those capsules were used in association with a microbial consortium, in a liquid phase bioremediation process, having degraded 43.6 % of the total hydrocarbon within 240 h, evidencing thus as a promising tool for hydrocarbon bioremediation.