Hyperbranched‐upon‐dendritic macromolecules as unimolecular hosts for controlled release

Novel amphiphilic hyperbranched‐upon‐dendritic polymers with a dendritic polyester core, a linear poly(ε‐caprolactone) (PCL) inner shell, and a hyperbranched polyglycerol outer shell have been prepared. The structures of the hyperbranched‐upon‐dendritic polymers were characterized by using NMR spectra. The critical aggregating concentrations (CACs) of those amphiphilic hyperbranched‐upon‐dendritic polymers were measured by using pyrene as the polarity probe. To study the encapsulation performances of those hyperbranched‐upon‐dendritic polymers as unimolecular hosts, inter‐molecular encapsulation was carefully prevented by controlling the host concentrations below their CACs and by washing with good organic solvents. The study on encapsulation of two model guest molecules, pyrene and indomethacin, was performed. The amounts of encapsulated molecules were dependent mainly on the size of inner linear shells. About three pyrene molecules or five indomethacin molecules were encapsulated in hyperbranched‐upon‐dendritic polymers with average PCL repeating units of two but different hyperbranched polyglycerol outer shells, whereas about five pyrene molecules or about 12 indomethacin molecules were encapsulated in those with PCL repeating units of nine. The encapsulated molecules could be released in a controlled manner. Thus, the hyperbranched‐upon‐dendritic polymers could be used as unimolecular nanocarriers with controllable molecular encapsulation dosage for controlled release. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4013–4019, 2010     

基于环糊精包结络合作用的大分子自组装*

本文综述了基于环糊精包结络合作用的大分子自组装的研究进展,包括：（1) 线型、梳型、多臂星型或超支化聚合物与环糊精或其二聚体自组装形成多聚轮烷（分子项链）、多聚准轮烷、双多聚（准）轮烷、分子管、双分子管、超分子凝胶及其应用;（2）桥联环糊精与桥联客体分子自组装制备线型或超支化超分子聚合物;（3）温度、pH值、光及客体分子刺激响应智能体系; （4) 通过亲水性的环糊精线型均聚物与含金刚烷的疏水性聚合物之间的包结络合作用来制备高分子胶束及其空心球等。     

Detection and amplification of chirality by helical polymers

A unique feature of synthetic helical polymers for the detection and amplification of chirality is briefly described in this article. In sharp contrast to host-guest and supramolecular systems that use small synthetic receptor molecules, chirality can be significantly amplified in a helical polymer, such as poly(phenylacetylene)s with functional pendants, which enable the detection of a tiny imbalance in biologically important chiral molecules through a noncovalent bonding interaction with high cooperativity. The rational design of polymeric receptors can be possible by using chromophoric helical polymers combined with functional groups as the pendants, which target particular chiral guest molecules for developing a highly efficient chirality-sensing system. The chirality sensing of other small molecular and supramolecular systems is also briefly described for comparison.     

Influence of alkyl chains of amphiphilic hyperbranched poly(ester amine)s on the phase‐transfer performances for acid dye and the aggregation behaviors at the interface

Hyperbranched poly(ester amine) (HPEA) with terminal secondary amine groups was synthesized by the Michael addition reaction between piperazine and trimethylolpropanetriacrylate with a molar ratio of 13:6. It was further reacted with a series of aliphatic acid chlorides, including stearoyl chloride, dodecanoyl chloride, and octanoyl chloride, to yield three modified amphiphilic hyperbranched polymers, which were termed HPEA‐C18, HPEA‐C12, and HPEA‐C8, respectively. These polymers were characterized with Fourier transform infrared, ¹H NMR, gel permeation chromatography, and differential scanning calorimetry measurements. Because of the existence of interior tertiary amine groups, the modified amphiphilic polymers were used as host molecules to extract the guest acid dye, methyl orange (MO), from the aqueous layer to the organic layer on the basis of the acid–base interaction. The influences of the pH of the aqueous layer and the length of the alkyl chains in the modified polymers on the phase‐transfer performances were investigated. The results indicated that more MO molecules could be extracted at a lower pH because of the formation of more quaternary ammonium ions within the host molecules. As the length of the alkyl chains in the modified polymers increased, both the transfer capability and the intermolecular aggregation at the interface were enhanced. The extracted MO could be reversibly released from the organic layer to the aqueous layer under basic conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2921–2930, 2005     

铱配合物为核、聚对苯为枝的超支化电磷光聚合物的合成与发光性能

用Suzuki缩聚反应合成了以三-(2-间溴苯基吡啶)合铱为核,以聚2,5-二辛氧基苯为枝的超支化电磷光绿光聚合物（PPPIrppy）。 聚合物中当铱配合物摩尔分数大于0.5%时,主体的发射被完全淬灭,电致发光（EL）光谱只有位于520 nm处的绿光发射,表明主客体之间发生了有效的能量转移。 基于铱配合物摩尔分数为1％的聚合物的发光器件(器件结构：ITO/PEDOT:PSS/emissive layer/Ba/Al)在电流密度为40×10-3 A/cm2时,最大电流效率达到2.89 cd/A,器件的最大亮度达到1 689 cd/m2,色坐标为（0.34,0.59）。     

Host–Guest Interactions of Phosphorescent Molecular Tweezers Based on an Alkynylplatinum(II) Terpyridine System with Polyaromatic Hydrocarbons

Host–guest interactions of a molecular tweezer complex 1 with various planar organic molecules including polyaromatic hydrocarbons (PAHs) were investigated by 1D and 2D ¹H NMR spectroscopy, UV/Vis absorption and emission titration studies. 2D and DOSY NMR spectroscopies support the sandwiched binding mode based on 1:1 host–guest interactions. The binding constants (K_S) of complex 1 for various PAHs were determined by NMR titration studies and the values were found to span up to an order of 10⁴ M ^?1 for coronene to no observable interaction for benzene, indicating that the π‐surface area is important for such host–guest interactions. The substituent effect on the host–guest interaction based on the guest series of 9‐substituted anthracenes was also studied. In general, a stronger interaction was observed for the anthracene guest with electron‐donating groups, although steric and π‐conjugation factors cannot be completely excluded. The photophysical responses of complex 1 upon addition of various PAHs were measured by UV/Vis and emission titration studies. The UV/Vis absorption spectra were found to show a drop in absorbance of the metal‐to‐ligand charge‐transfer (MLCT) and ligand‐to‐ligand charge‐transfer (LLCT) admixture band upon addition of various guest molecules to 1 , whereas the emission behavior was found to change differently depending on the guest molecules, showing emission enhancement and/or quenching. It was found that emission quenching occurred either via energy transfer or electron transfer pathway or both, while emission enhancement was caused by the increase in rigidity of complex 1 as a result of host–guest interaction.     

Novel functional hyperbranched polyether polyols as prospective drug delivery systems

Multifunctional hyperbranched polyether polyols bearing protective poly(ethylene glycol) (PEG) chains with or without the folate targeting ligand at their end have been prepared. Solubilization in these polymers of a fluorescent probe, pyrene, and an anticancer drug, tamoxifen, was physicochemically investigated. It was found that PEG chains attached at the surface of these hyperbranched polymers, in addition to their well-established protective role, enhance the encapsulation efficiency of the polymers. The release of pyrene and tamoxifen observed upon addition of sodium chloride is, in most of the cases, significant only at concentrations exceeding the physiological extracellular concentration. Thus, a significant amount of the probe or drug remains solubilized inside the carriers, which is an encouraging result if the polymers are to be used for drug delivery.     

Synthesis of backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s through proton‐transfer polymerization

Stimuli‐responsive hyperbranched polymers have attracted great attention in recent years because of their wide applications in biomedicine. Through proton‐transfer polymerization of triethanolamine and 1,2,7,8‐diepoxyoctane with the help of potassium hydride, a series of novel backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s were prepared successfully in one‐pot. The degrees of branching of the resulting polymers were at 0.40–0.49. Turbidity measurements revealed that hyperbranched poly(amine‐ether)s exhibited thermo and pH dual‐responsive properties in water. Importantly, these responsivities could be readily adjusted by changing the polymer composition as well as the polymer concentration in aqueous solution. Moreover, in vitro evaluation demonstrated that hyperbranched poly(amine‐ether)s showed low cytotoxicity and efficient cell internalization against NIH 3T3 cell lines. These results suggest that these backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s are promising materials for biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Supramolecular self-assembly and controllable drug release of thermosensitive hyperbranched multiarm copolymers

A novel temperature-responsive hyperbranched multiarm copolymer with a hydrophobic hyperbranched poly(3-ethyl-3-(hydroxymethyl)oxetane)(HBPO) core and thermosensitive poly(N-isopropylacrylamide)(PNIPAM) arms was synthesized via the atom transfer radical polymerization(ATRP) of NIPAM monomers from a hyperbranched HBPO macroinitiator.It was found that HBPO-star-PNIPAM self-assembled into multimolecular micelles(around 60 nm) in water at room temperature according to pyrene probe fluorescence spectrometry,1H N...     

Hyperbranched molecular nanocapsules: comparison of the hyperbranched architecture with the perfect linear analogue

The results of a comparative study of hyperbranched, partially esterified polyglycerols with their linear polyglycerol analogues with respect to molecular encapsulation and phase transfer are reported. Two hyperbranched polyglycerol samples with molecular weights of 3000 and 8000 g/mol (Mw/Mn = 1.3), respectively, have been partially esterified using palmitoyl chloride. The same modification was applied to the structurally analogous linear polyglycerol (3000 g/mol). A detailed UV-vis study correlated with viscosity experiments demonstrated that only the hyperbranched core-shell structures form "nanocapsules", leading to the encapsulation of polar guest molecules. The results underline the crucial role of the hyperbranched topology and the resulting solution conformation for supramolecular guest encapsulation and phase transfer. The unusually compact ("collapsed") structure assumed by the hyperbranched core-shell amphiphiles in apolar media is responsible for the formation of a hydrophilic compartment, capable of irreversibly taking up guest molecules.     

One‐pot synthesis and characterization of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids and multihydroxyl secondary amines

A convenient and cost‐effective strategy for synthesis of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids (A₂) and multihydroxyl secondary amine (CB₂) has been developed. By optimizing the conditions of model reactions, the AB₂‐type intermediates were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to thermal polycondensation in the absence of any catalyst to prepare the aliphatic and semiaromatic hyperbranched poly(ester‐amide)s bearing multi‐hydroxyl end‐groups. The FTIR and ¹H NMR spectra indicated that the polymerization proceeded in the proposed way. The DBs of the resulting polymers were confirmed by a combination of inverse‐gated decoupling ¹³C NMR, and DEPT‐135 NMR techniques. The DBs of the hyperbranched poly(ester‐amide)s were in the range of 0.44–0.73, depending on the structure of the monomers used. The hyperbranched polymers exhibited moderate molecular weights with relatively broad distributions determined by SEC. All the polymers displayed low inherent viscosity (0.11–0.25 dL/g) due to the branched nature. Structural and end‐group effects on the thermal properties of the hyperbranched polymers were investigated using DSC. The thermogravimetric analysis revealed that the resulting polymers exhibit reasonable thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5077–5092, 2008     

Synthesis and micellization of star‐like hyperbranched polymer with poly(ethylene oxide) and poly(ε‐caprolactone) arms

Novel star‐like hyperbranched polymers with amphiphilic arms were synthesized via three steps. Hyperbranched poly(amido amine)s containing secondary amine and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3‐amino‐1,2‐propanediol (APD) with feed molar ratio of 1:2. ¹H, ¹³C, and HSQC NMR techniques were used to clarify polymerization mechanism and the structures of the resultant hyperbranched polymers. Methoxyl poly(ethylene oxide) acrylate (A‐MPEO) and carboxylic acid‐terminated poly(ε‐caprolactone) (PCL) were sequentially reacted with secondary amine and hydroxyl group, and the core–shell structures with poly(1TT‐2APD) as core and two distinguishing polymer chains, PEO and PCL, as shell were constructed. The star‐like hyperbranched polymers have different sizes in dimethyl sulfonate, chloroform, and deionized water, which were characterized by DLS and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1388–1401, 2008     

Toward a light-harvesting Hyperbranched Polyesteramine Host–guest Complex

A novel hyperbranched polyesteramine (PEA) architecture 1 was found to display light-harvesting properties by hosting anthracene-9-carboxylic acid guest 3. The light-harvesting ability has been studied by means of fluorescence spectroscopy. The binding behaviour has also been described by FT-IR and ¹H NMR spectroscopic methods. Hyperbranched host 1 also acts as the photon-harvesting chemosensor of the anthracenyl guest over the benzoic acid guest. Furthermore, the host loaded with the anthracenyl guest also exhibited ‘ON–OFF’ switching on protonation of amine sub-units with HCl, thereby making it of potential use as a pH-assisted photon-harvesting material.     

Synthesis of novel star-like hyperbranched polymers with poly(amido amine) core and poly(l-lysine) shell

Hyperbranched poly(amido amine)s containing vinyl and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3-amino-1,2-propanediol (APD) with equal molar ratio in feed. ¹H, ¹³C and HSQC NMR techniques were used to clarify the structure of hyperbranched polymers and polymerization mechanism. The Michael addition reaction of hyperbranched poly(1TT-1APD)s with primary amine-terminated poly(ε-benzyloxycarbonyl-l-lysine)s [PLys(Z)] yielded a star-like hyperbranched polymers with poly(1TT-1APD) core and Plys(Z) shell. The Z groups in PLys(Z) were removed under acidolysis, and thus star-like hyperbranched polymers with hydroxyl groups inside and primary amine groups outside were obtained successfully.     

Tunable Multiple Morphological Transformation of Supramolecular Hyperbranched Polymers Based on an A2B6-type POSS Monomer

The growing demands of supramolecular hyperbranched polymers integrating noncovalent interaction and unique topological structure merits had received considerable interest in the fabrication of novel materials for advanced applications.Herein,we prepared A2B6-type POSS-containing supramolecular hyperbranched polymers with multiple morphologies including lamellar-like,branched,hollow,core-shell and porous spherical structures through regulating self-assembling monomer concentrations and solvent polarities.The incorporation of appropriate emulative guest molecules would further trigger morphological transformations (such as vesicles and spherical micelles) by synergistic effects of unique POSS aggregation ability,supramolecular complexations and hydrophilic-hydrophobic interactions.Thus,this facile and universal strategy may enable a modular nanofabrication of supramolecular hyperbranched polymers with diversiform topological structure and sophisticated multifunctionality for their potential applications.     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Synthesis and drug release properties of novel pH- and temperature-sensitive copolymers based on a hyperbranched polyether core

Multi-arm star amphiphilic hyperbranched copolymers with poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) shell and hyperbranched poly(3-ethyl-3-(hydroxymethyl)oxetane) (HBPO) core were synthesized by reversible addition?Cfragmentation chain transfer method. The hyperbranched copolymers were further modified by succinic anhydride (SUC) to obtain the novel pH- and thermosensitive hyperbranched copolymer HBPO-star-PDMAEMAs-SUC. The composition and morphology of synthesized copolymers were investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy. These copolymers exhibited phase transitions in response to pH and temperature. The pH-dependent release properties of the drug-loaded micelles were also investigated using indomethacin (IND) as a model drug. The IND-loaded micelles displayed a rapid drug release at an alkaline pH.     

Reversible addition–fragmentation chain transfer mediated radical polymerization of asymmetrical divinyl monomers targeting hyperbranched vinyl polymers

Reversible addition–fragmentation chain transfer (RAFT) mediated radical polymerizations of allyl methacrylate and undecenyl methacrylate, compounds containing two types of vinyl groups with different reactivities, were investigated to provide hyperbranched polymers. The RAFT agent benzyl dithiobenzoate was demonstrated to be an appropriate chain‐transfer agent to inhibit crosslinking and obtain polymers with moderate‐to‐high conversions. The polymerization of allyl methacrylate led to a polymer without branches but with five‐ or six‐membered rings. However, poly(undecenyl methacrylate) showed an indication of branching rather than intramolecular cycles. The hyperbranched structure of poly(undecenyl methacrylate) was confirmed by a combination of ¹H, ¹³C, ¹H–¹H correlation spectroscopy, and distortionless enhancement by polarization transfer 135 NMR spectra. The branching topology of the polymers was controlled by the variation of the reaction temperature, chain‐transfer‐agent concentration, and monomer conversion. The significantly lower inherent viscosities of the resulting polymers, compared with those of linear analogues, demonstrated their compact structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 26–40, 2007     

Remarkably stable amphiphilic random copolymer assemblies: A structure–property relationship study

Synthesis of a library of amphiphilic random copolymers from a single reactive pre‐polymer and their self‐assembly is reported. Post‐polymerization modifications of the parent polymer containing pendant N‐hydroxy succinimide (NHS) ester groups with various oligooxyethylene (OE) amines produce amphiphilic random copolymers with same degree of polymerization and equal extent of randomness. ¹H‐NMR and FT‐IR data indicate quantitative substitution in all cases. The critical aggregation concentration (CAC) for all the polymers is estimated to be in the range of 10^?5 M. Stability of these nano‐aggregates is studied by photoluminescence using time dependent F—rster Resonance Energy Transfer (FRET) between co‐encapsulated lipophilic dyes namely DiO and DiI in the hydrophobic pocket of the aggregates. These studies suggest remarkably high stability for all systems. However those with shorter hydrophilic pendant chains are found to be even more robust. Morphology is examined by high resolution transmission electron microscopy (HRTEM) which reveals multi‐micellar clusters and vesicles for polymers containing short and longer OE segments, respectively. Encapsulation efficacy is tested with both hydrophobic and hydrophilic guest molecules. All of them can encapsulate hydrophobic guest pyrene while a hydrophilic dye Calcein can be sequestered only in vesicle forming polymers. Lower critical solution temperature (LCST) is exhibited by only one polymer that contains the shortest OE chains. All polymers exhibit excellent cell viability as determined by MTT assay. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4932–4943     

Recognition‐Mediated Hydrogel Swelling Controlled by Interaction with a Negative Thermoresponsive LCST Polymer

Most polymeric thermoresponsive hydrogels contract upon heating beyond the lower critical solution temperature (LCST) of the polymers used. Herein, we report a supramolecular hydrogel system that shows the opposite temperature dependence. When the non‐thermosesponsive hydrogel NaphtGel, containing dialkoxynaphthalene guest molecules, becomes complexed with the tetra cationic macrocyclic host CBPQT⁴⁺, swelling occurred as a result of host–guest complex formation leading to charge repulsion between the host units, as well as an osmotic contribution of chloride counter‐ions embedded in the network. The immersion of NaphtGel in a solution of poly(N‐isopropylacrylamide) with tetrathiafulvalene (TTF) end groups complexed with CBPQT⁴⁺ induced positive thermoresponsive behaviour. The LCST‐induced dethreading of the polymer‐based pseudorotaxane upon heating led to transfer of the CBPQT⁴⁺ host and a concomitant swelling of NaphtGel. Subsequent cooling led to reformation of the TTF‐based host–guest complexes in solution and contraction of the hydrogel.