Novel electrospun PAN�CPVC composite fibrous membranes as polymer electrolytes for polymer lithium-ion batteries

Composite fibrous membranes based on poly(acrylonitrile)(PAN)-poly(vinyl chloride)(PVC) have been prepared by electrospinning. The fibrous membranes are made up of fibers of 850- to 1,300-nm diameters. These fibers are stacked in layers to produce a fully interconnected pore structure. Polymer electrolytes were prepared by immersing the fibrous membranes in 1 M LiClO₄-PC solution for 60 min. The condition of pure PAN polymer electrolytes is jelly, which has poor mechanical performance and cannot be used. But when PVC with a good mechanical stiffener was added to PAN, the condition of composite PAN?CPVC polymer electrolytes becomes free-standing. In addition, the optimum electrochemical properties have been observed for the polymer electrolyte based on PAN?CPVC (8:2, w/w) to show ionic conductivity of 1.05?×?10^?3 S cm^?1 at 25 °C, anodic stability up to 4.9 V versus Li/Li⁺, and a good compatibility with lithium metal resulting in low interfacial resistance. The promising results showed that fibrous PEs based on PAN?CPVC (8:2, w/w) have good mechanical stability and electrochemical properties. This shows a great potential application in polymer lithium-ion batteries.     

Solid electrolyte membranes from semi-interpenetrating polymer networks of PEG-grafted polymethacrylates and poly(methyl methacrylate)

Solid polymer electrolyte membranes were prepared as semi-interpenetrating networks by photo-induced polymerization of mixtures of poly(ethylene glycol) (PEG) methacrylate macromonomers in the presence of poly(methyl methacrylate) (PMMA) and lithium bis(trifluoromethanesulfonyl)imide salt. The composition of the membranes was varied with respect to the PMMA content, the degree of cross-linking, and the salt concentration. Infrared analysis of the membranes indicated that the lithium ions were coordinated by the PEG side chains. Calorimetry results showed a single glass transition for the blend membranes. However, dynamic mechanical measurements, as well as a closer analysis of the calorimetry data, revealed that the blends were heterogeneous systems. The ionic conductivity of the membranes increased with the content of PEG-grafted polymethacrylate, and was found to exceed 10^− 5 S cm^− 1 at 30 °C for membranes containing more than 85 wt.% of this component in the polymer blend.     

Poly(ethylene glycol)/poly(2-acrylamido-2-methyl-1-propane sulfonic acid) gel electrolytes: a detailed investigation of their conductivity and characterization

Poly(ethylene glycol)/poly(2-acrylamido-2-methyl-1-propane sulfonic acid) (PEG/PAMPS) with a transparent appearance were prepared in the presence of ammonium persulfate (APS) as an initiator at 70 °C for 24 h. PEG/PAMPS-based polymer gel electrolytes in a motionless and uniform state were obtained by adding the required amount of liquid electrolytes to a dry PEG/PAMPS polymer. Liquid electrolytes include organic solvents with high boiling points (-1-methyl-2-pyrrolidone (NMP) and γ-butyrolactone (GBL)) and a redox couple (alkali metal iodide salt/iodine). The optimized conditions for PEG/PAMPS-based gel electrolytes based on the salt type, the concentration of alkali metal iodide salt/iodine, and solvent volume ratio were determined to be NaI, 0.4 M NaI/0.04 M I₂, and NMP:GBL (7:3, v/v), respectively. The highest ionic conductivity and the liquid electrolyte absorbency were 2.58 mS cm^?1 and 3.6 g g^?1 at 25 °C, respectively. The ion transport mechanism in both the polymer gel electrolytes and liquid electrolytes is investigated extensively, and their best fits with respect to the temperature dependence of the ionic conductivity are determined with the Arrhenius equation.     

Conductivity studies of poly(ethylene oxide)(PEO)/poly(vinyl alcohol) (PVA) blend gel polymer electrolytes for dye-sensitized solar cells

Poly(ethylene oxide)(PEO)–poly(vinyl alcohol) (PVA) blend-based gel polymer electrolytes (GPEs) have been prepared by blending equal weights of PEO and PVA in ethylene carbonate (EC), dimethyl sulfoxide (DMSO), tetrabutylammonium iodide (TBAI), and iodine crystals (I₂). The conductivity, diffusion coefficient, number density, and ion mobility of the electrolytes have been calculated from the impedance data obtained from electrochemical impedance spectroscopy (EIS) measurements. The GPE with the composition of 7.02 wt%, PVA, 7.02 wt% PEO, 30.11 wt% ethylene carbonate (EC), 30.11 wt% DMSO, 24.08 wt% TBAI and 1.66 wt% I₂ exhibits the highest conductivity of 5.5 mS cm^?1 at room temperature. Dye-sensitized solar cells (DSSCs) with configuration fluorine tin oxide (FTO)/titanium dioxide/N3-dye/GPE/platinum/FTO have been fabricated and tested under the white light of intensity 100 mW cm^?2. The DSSC containing the highest conducting GPE exhibits the highest power conversion efficiency, η of 5.36 %.     

Electrical,structural, and morphological studies of honeycomb-like microporous zinc-ion conducting poly (vinyl chloride)/poly (ethyl methacrylate) blend-based polymer electrolytes

Solid polymer electrolytes (SPEs) based on poly (vinyl chloride)/poly (ethyl methacrylate) [PVC/PEMA] blend complexed with zinc triflate [Zn(CF₃SO₃)₂] salt have been prepared using solution casting technique. Thin film samples containing various blend ratios of PVC/PEMA with fixed composition of salt have been examined by means of complex impedance analysis, and as a consequence, the typical composition corresponding to PVC (30 wt%)/PEMA (70 wt%) has been identified as the optimized blend exhibiting the highest room temperature ionic conductivity of 10^?8 Scm^?1. The ionic conductivity of the optimized blend was further enhanced from 10^?8 to 10^?6 Scm^?1 by adding the chosen salt in different weight percentages at 301 K. The occurrence of complexation of the polymer blend and an evidence of interaction of cations, namely Zn²⁺ ions with the polymer blend, have been confirmed by Attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) spectroscopy measurement studies. The efficacy of ion-polymer interactions was estimated by means of an evaluation of transport number data pertaining to Zn²⁺ ions which was found to be 0.56. The apparent changes resulting in the structural properties of these polymer electrolytes possessing a honeycomb-like microporous structure were identified using X-ray diffraction (XRD) and scanning electron microscopic (SEM) studies. Such promising features of the present polymer blend electrolyte system appear to suggest possible fabrication of new rechargeable zinc batteries involving improved device characteristics.     

LiClO4-doped plasticized chitosan and poly(ethylene glycol) blend as biodegradable polymer electrolyte for supercapacitors

Biodegradable polymer electrolyte comprising the blend of chitosan (CS) and poly(ethylene glycol) (PEG) plasticized with ethylene carbonate and propylene carbonate, as host polymer, and lithium perchlorate (LiClO₄), as a dopant, was prepared by solution casting technique. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The variation of conductivity and dielectric properties has been investigated as a function of polymer blend ratio, plasticizer content and LiClO₄ concentration at temperature range of 298–343 K. The DSC thermograms show two broad peaks for CS/PEG blend and increased with increase in the LiClO₄ content. The maximum conductivity has been found to be 1.1?×?10^?4 S cm^?1 at room temperature for 70:30 (CS/PEG) concentration. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The activation energy of all samples was calculated using the Arrhenius plot, and it has been found to be 0.12 to 0.38 eV. A carbon–carbon supercapacitor has been fabricated using this electrolyte, and its electrochemical characteristics and performance have been studied. The supercapacitor showed a fairly good specific capacitance of 47 F?g^?1.     

Lithium ionic conduction in poly (methacrylic acid)-poly (ethylene oxide) complex containing lithium perchlorate

Polymeric solid electrolytes were prepared by dispersing homogeneously lithium perchlorate in a hydrogen-bonding type intermacromolecular complex of poly(methacrylic acid)-poly(ethylene oxide). They showed ionic conductivity of more than 10^-6 (S/cm) at room temperature. The conductivity depended on the molecular weight of the poly(ethylene oxide), the proportion of poly(ethylene oxide) and lithium perchlorate, and so on. Poly(ethylene oxide) with average molecular weights ranging from 400 to 2 × 10⁴ were used to clarify the effect of chain length on the conductivity. The conductivity increased and the flexibility of the films improved with increasing the content of poly(ethylene oxide) with average molecular weight of 400. The maximum conductivity of 1.3 × 10^-5 (S/cm) at 60°C was obtained for the flexible film when the composition of poly(methacrylic acid)/poly(ethylene oxide)/lithium perchlorate was in the ratio of 17.0/ 68.0/15.0 in unit mol%.     

Characterization of high ionic conducting PVAc–PMMA blend-based polymer electrolyte for electrochemical applications

A solid polymer blend electrolyte is prepared using poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) polymers with different molecular weight percentage (wt%) of ammonium thiocyanate (NH₄SCN) by solution casting technique with tetrahydrofuran (THF) as a solvent. The structural, morphological, vibrational, thermal and electrical properties of the prepared polymer blend electrolytes have been studied. The incorporation of NH₄SCN into the polymeric matrix causes decrease in the degree of crystallinity of the samples. The complex formation between the polymer and salt has been confirmed by FTIR technique. The increase in T _g with increase in salt concentration has been investigated. The maximum conductivity of 3.684?×?10^?3 S cm^?1 has been observed for the composition of 70PVAc/30PMMA/30 wt% of NH₄SCN at 303 K. This value of ionic conductivity is five orders of magnitude greater than that of 70PVAc/30PMMA polymer membrane. Dielectric and transport studies have been done. The highest conducting polymer electrolyte is used to fabricate proton battery with the configuration Zn/ZnSO₄·7H₂O (anode) ||polymer electrolyte||PbO₂/V₂O₅ (cathode). The open circuit voltage of the fabricated battery is 1.83 V, and its performance has been studied.     

Electrical and electrochemical properties of poly (methyl methacrylate) based nanocomposite gel electrolytes dispersed with dedoped (insulating) polyaniline nanofibers

In this work, we have investigated the effect of dedoped (insulating) polyaniline (PAni) nanofibers on the electrical and electrochemical properties of poly(methyl methacrylate) (PMMA)-based gel electrolytes. PAni nanofibers have been synthesized using interfacial polymerization technique. By analysis of X-ray diffraction (XRD) and impedance spectroscopy results, it has been demonstrated that the incorporation of dedoped PAni nanofibers up to a moderate concentration (4 wt%) to PMMA–(PC?+?DEC)–LiClO₄ gel polymer electrolyte system significantly enhances the ionic conductivity of the electrolyte system, which can be attributed to the inhibition of polymer chain reorganization upon dispersion of high aspect ratio nanofibers in PMMA matrix resulting in reduction in polymer crystallinity, which gives rise to an increase in ionic conductivity. At higher concentration, dedoped nanofibers appear to get phase separated and form insulating clusters, which impede ionic transport. The phase separation phenomena at higher fraction of nanofibers are confirmed by XRD. Studies on electrochemical behavior reveal that electrochemical potential window increases with the increase of nanofibers loading.     

Properties of a gel polymer electrolyte based on lithium salt with poly(vinyl butyral)

Poly(vinyl butyral) (PVB) is of particular interest because of its low cost, extremely wide temperature work range (? 20 to 120 °C), and efficient chemical stability. In this study, a gel polymer electrolyte (GPE) containing Li⁺ ions was fabricated by using dimethylacetylamine (DMA), lithium perchlorate (LiClO₄), and PVB. The experimental results indicated that a highly transparent GPE with a high ionic conductivity (σ) could be obtained by mixing glue (DMA with a PVB content of 10 wt%) with a LiClO₄ content of 6 wt%. It was found that the ionic conductivity (σ) of the GPE depended on the LiClO₄ content, and the GPE with a LiClO₄ content of 6 wt% exhibited a maximum σ of 7.73 mS cm^?1, a viscosity coefficient of 3360 mPa s, and a transmittance greater than 89% (visible region) at room temperature. Furthermore, PVB improved the electrolyte solution leakage, and the LiClO₄ was used as an ion supply source for the high σ of the GPE.     

Conduction mechanism of lithium bis(oxalato)borate–cellulose acetate polymer gel electrolytes

Polymer gel electrolytes (PGE) belonging to salt–solvent–polymer hybrid systems are prepared using a mixture of lithium bis(oxalato)borate (LiBOB), γ-butyrolactone (γ-BL), and cellulose acetate (CA). The increase in ionic conductivity of PGE is due to the dissociation of ion aggregates, as confirmed by Fourier transform infrared analysis. The highest conductivity attained by the PGE is 7.05 mS cm^?1 at 2.4 wt.% CA. The plots of conductivity–temperature show a classical Arrhenius relationship. The electrical properties of the sample with the highest conductivity are analyzed using electrical permittivity and electric modulus formalism studies. Meanwhile, the frequency-dependent conductivity of the polymer gel electrolyte adheres to Jonscher’s power law. Conduction mechanism study also shows that the 2.4 wt.% CA PGE is in agreement with the small polaron hopping model.     

Effect of lithium salt concentration in PVAc/PMMA-based gel polymer electrolytes

Hybrid solid polymer electrolyte films comprising of poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), LiClO₄, and propylene carbonate are prepared by solution casting technique by varying the salt concentration. In this study, PVAc/PMMA polymer blend ratio is fixed as 25:75 on the basis of conductivity and mechanical stability of the film. X-ray diffraction, Fourier transform infrared impedance, thermogravimetry/differential thermal analysis and scanning electron microscopy studies are carried out for the polymer electrolytes. The maximum ionic conductivity is found to be 4.511 × 10⁻⁴ S cm⁻¹ at 303 K for the plasticized polymer electrolyte with 8 wt.% of LiClO₄. The ionic conductivity is found to decrease with an increase of LiClO₄ concentration.     

Design of amphiphilic poly(vinylidene fluoride-<Emphasis Type="Italic">co</Emphasis>-hexafluoropropylene)-based gel electrolytes for high-performance lithium-ion batteries

Gel polymer electrolytes (GPE) based on electrospun polymer membranes, poly(vinylidene fluoride-co-hexafluoropropylene), grafted poly(poly(ethylene glycol) methyl ether methacrylate) (PVDF-HFP-g-PPEGMA), and poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared for lithium ion batteries by incorporating with 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI). The uniform porosity and the compatibility of blend electrospun membranes avoiding the pore blocking are beneficial to enhance the electrolyte uptakes. The GPE based on the fibrous PVDF-HFP-g-PPEGMA/PVDF-HFP activated with 1 M LiTFSI (BMITFSI) show a maximum ionic conductivity of 2.3 × 10^?3 S cm^?1 at room temperature and electrochemical stability of up to 5.2 V. The Li/GPE/LiFePO₄ cells with GPE based on PVDF-HFP-g-PPEGMA/PVDF-HFP blend electrospun membrane deliver specific capacities of 163, 141, and 125 mAh g^?1 at 0.1, 0.5, and 1C rates, respectively, and remains well after 50 cycles for each rate. Therefore, the novel GPE have been demonstrated to be suitable for lithium-ion battery applications.     

Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate

Thin films of blend polymer electrolytes comprising poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) complexed with ammonium thiocyanate (NH₄SCN) salt in different compositions have been prepared by solution casting technique using distilled water as solvent. The prepared films have been investigated by different experimental techniques. The complexation of these films has been studied by FTIR spectroscopy. The increase in amorphousness of the films with increase in NH₄SCN content has been confirmed by XRD analysis. The addition of ammonium thiocyanate salt to PVA-PVP polymer blend shows a shift in T_g of the blend. The effect of salt concentration and temperature on the ionic conductivity of the polymer blend films has been analyzed using AC impedance spectroscopy. The maximum conductivity of 6.85 × 10^?4 S cm^?1 at room temperature has been observed for the blend with 50 mol% PVA-50 mol% PVP complexed with 40 mol% NH₄SCN. The activation energy has been found to be minimum (0.24 eV) for this sample. Wagner’s polarization technique shows that the charge transport in these blend films is predominantly due to ions. Using the highest conductivity blend polymer electrolyte, a proton battery has been fabricated and its discharge characteristics have been studied.     

Poly (ethylene oxide) (PEO)-based,sodium ion-conducting‚ solid polymer electrolyte films,dispersed with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> filler,for applications in sodium ion cells

The studies on solid polymer electrolyte (SPE) films with high ionic conductivity suitable for the realization of all solid-state Na-ion cells? form the focal theme of the work presented in this paper. The SPE films are obtained by the solution casting technique using the blend solution of poly (ethylene oxide) (PEO) with ethylene carbonate (EC) and propylene carbonate (PC) and complexed with sodium nitrate. Structural and thermal studies of SPE films are done by XRD, FTIR spectroscopy, and TGA techniques. Surface morphology of the films is studied using the FESEM. The ionic conductivity of SPE films is determined from the electrochemical impedance spectroscopy studies. For the SPE film with 16 wt% of NaNO₃ used for reacting with the polymer blend of PEO with EC and PC, the ionic conductivity obtained is around 1.08 × 10^?5 S cm^?1. Addition of the Al₂O₃ as the filler material is found to enhance the ionic conductivity of the SPE films. The studies on the Al₂O₃ modified SPE film show an ionic conductivity of 1.86 × 10^–4 S cm^?1, which is one order higher than that of the SPE films without the filler content. For the SPE film dispersed with 8 wt% of Al₂O₃, the total ion transport number observed is around 0.9895, which is quite impressive from the perspective of the applications in electrochemical energy storage devices. From the cyclic voltammetry studies, a wide electrochemical stability window up to 4 V is observed, which further emphasizes the commendable electrochemical behavior of these SPE films.     

PVC–PMMA composite electrospun membranes as polymer electrolytes for polymer lithium-ion batteries

Composite nanofibrous membranes based on poly (vinyl chloride) (PVC)?Cpoly (methyl methacrylate) (PMMA) were prepared by electrospinning and then they were soaked in liquid electrolyte to form polymer electrolytes (PEs). The introduction of PMMA into the PVC matrix enhanced the compatibility between the polymer matrix and the liquid electrolyte. The composite nanofibrous membranes prepared by electrospinning involved a fully interconnected pore structure facilitating high electrolyte uptake and easy transport of ions. The ion conductivity of the PEs increased with the increase in PMMA content in the blend and the ion conductivity of the polymer electrolyte based on PVC?CPMMA (5:5, w/w) blend was 1.36?×?10^?3 S cm^?1 at 25?°C. The polymer electrolyte based on PVC?CPMMA (5:5, w/w) blend presented good electrochemical stability up to 5.0?V (vs. Li/Li⁺) and good interfacial stability with the lithium electrode. The promising results showed that nanofibrous PEs based on PVC?CPMMA were of great potential application in polymer lithium-ion batteries.     

Exploring low temperature Li+ ion conducting plastic battery electrolyte

We report blend-based plastic polymer electrolyte (i.e., polyethylene oxide (PEO)–polydimethyl siloxane (PDMS)–lithium hexafluorophosphate (LiPF₆)) with substantial improvement in DC conductivity at ambient and subambient temperatures when compared with literature reports. Conductivity variation with salt concentration, investigated within ±30 °C range, indicates an optimum conductivity of 5.6?×?10^?5 S cm^?1 at 30 °C for Ö/Li ~10 with a further lowering by one order at 0 °C and it remains unaltered at ?10 °C. Enhanced conductivity in this blend electrolyte, though lower than two copolymer counterparts, is attributed to very low glass transition temperatures of the host polymers. X-ray diffraction (XRD) and scanning electron microscopy (SEM) suggest an effective blending between the two polymers with an effective interaction between the Li salt and the blend polymer matrix. Raman spectroscopy results indicated that cation (Li⁺) coordination occurs at the C=Ö site in PEO out of the two electron-rich sites (i.e., CÖ and Si–Ö–Si) in the PEO–PDMS blend. The blend electrolytes are predominantly ionic (t _ion ~97 %).     

Plastic separators with improved properties for portable power device applications

We report a novel clay-intercalated polymer nanocomposites (PNC) having very high ionic conductivity (~10^?3 S cm^?1) and improved stability properties. The suitability of the PNC films for subsequent use as a separator component in energy storage devices has been explored in terms of desirable voltage (~4.3 V), thermal (~290 °C) and mechanical (~55 MPa) stability, and ion transport (t _ion, ~0.99) properties. Intercalation of (polyacrylonitrile (PAN)₈LiPF₆ complex into nanometric channels of organophilic clay has been confirmed by X-ray diffraction analysis. These observations agree well with transmission electron microscopy results. Impedance spectroscopy indicated bulk electrical conduction in the high-frequency region followed by electrode polarization effects at lower frequencies. The latter effect is clearly noticed in the admittance plots. Estimated value of ionic conductivity and stability is invariably higher in PNCs compared with clay-free polymer–salt complex film. The feasibility of ionic conduction in the PNC separators has been explained in terms of hopping mechanism. The optimized PNC film may be expected to serve the dual purpose of electrolyte as well as separator in portable energy storage/conversion devices.     

Ionic conductivity,ionic transport and electrochemical characterizations of plastic crystal polymer electrolytes

In this work, the plastic crystal polymer electrolytes (PCPEs), composed of polyacrylonitrile (PAN), succinonitrile (SN) and lithium bis(trifluoromethane)sulfonimide (LiTFSI) were prepared. The concentrations of lithium salt were varied by weight percentage from 10 wt% to 50 wt%. The ionic conductivity of the PCPE films increases with the increase of lithium salt, where the highest value recorded is in the order of ~10^?2 S cm^?1. The temperature-dependence conductivity analysis shows that the PCPE films exhibit Arrhenius behaviour when subjected to the temperature range from 303 K to 343 K. The decrease in crystallinity was confirmed by X-ray diffraction (XRD) and Differential Scanning Calorimetry (DSC) analyses. The cationic transport number also increases with the increase of salt which corresponds well to their conductivity values. It is found that the films are electrochemically stable up to ~3.6 V as revealed by the linear sweep voltammetry (LSV) analysis. The cyclic voltammetry (CV) plots of the films shown no substantial change in the redox peaks which mean that the charge transfer reaction is reversible.     

New polymer electrolyte based on (PVA–PAN) blend for Li-ion battery applications

A polymer blend electrolyte based on polyvinyl alcohol (PVA) and polyacrylonitrile (PAN) was prepared by a simple solvent casting technique in different compositions. The ionic conductivity of polymer blend electrolytes was investigated by varying the PAN content in the PVA matrix. The ionic conductivity of polymer blend electrolyte increased with the increase of PAN content. The effect of lithium salt concentrations was also studied for the polymer blend electrolyte of high ionic conductivity system. A maximum ionic conductivity of 3.76×10⁻³ S/cm was obtained in 3 M LiClO₄ electrolyte solution. The effect of ionic conductivity of polymer blend electrolyte was measured by varying the temperature ranging from 298 to 353 K. Linear sweep voltammetry and DC polarization studies were carried out to find out the stability and lithium transference number of the polymer blend electrolyte. Finally, a prototype cell was assembled with graphite as anode, LiMn₂O₄ as cathode, and polymer blend electrolyte as the electrolyte as well as separator, which showed good compatibility and electrochemical stability up to 4.7 V.