Density functional theory calculation of platinum surface segregation energy in Pt3Ni (111) surface doped with a third transition metal

We have used density functional theory method to calculate the Pt surface segregation energy in the Pt₃Ni (111) surface doped with a third transition metal M and thus investigated the influence of component M on the extent of Pt segregation to the outermost layer of these Pt₃Ni/M (111) surface. As a third component in the Pt₃Ni/M (111) surface, V, Fe, Co, Mo, Tc, Ru, W, Re, Os, and Ir were predicted to lead to even more negative Pt surface segregation energies than that in the based Pt₃Ni (111) surface; Ti, Cr, Mn, Cu, Zr, Nb, Rh, Hf, and Ta would still retain the preference of Pt segregation to the surface but with less extent than the replaced Ni, while Pd, Ag, and Au would completely suppress the Pt segregation to the Pt₃Ni/M (111) surfaces. Furthermore, we examined the relation between the Pt surface segregation energy in the Pt₃Ni/M (111) surfaces and the material properties (lattice parameter, heat of solution, and Pt surface segregation energy) of binary alloys Pt₃M. It was found that the surface energy effect, strain effect, and heat of solution effect induced by the doped element M would collectively affect the Pt surface segregation energy in the Pt₃Ni/M (111) surfaces.     

Angular distribution of the desorption of CO2 produced on Pt(111) surface at low temperatures

A new CO₂ formation process was observed in the CO oxidation over Pt(111) surface below 200 K. The desorption flux of the product CO₂, which is formed from the interaction between chemisorbed CO and adsorbed oxygen molecules O₂^2? (a), showed a very sharp angular distribution along the surface normal.     

Catalytic activity of Pd ensembles incorporated into Au nanocluster for CO oxidation: A first-principles study

We investigated the catalytic activity of Pd atoms incorporated into Au(111) facet through first-principles calculations, and found that the Pd monomer, dimer, and trimer are highly reactive for the reaction of CO+O₂→CO₂+Ovia association mechanism, in which an intermediate state (OOCO) is formed. Significantly, a low energy barrier (0.19-0.32 eV) was found for the formation of OOCO. The atomic oxygen left by CO+O₂→CO₂+O reaction can be removed by another CO on Pd-decorated Au cluster via Langmuir-Hinshelwood or Eley-Rideal mechanism. Our studies indicate Pd ensembles incorporated into Au(111) facet markedly improve the catalytic activity of gold nanocluster.     

CO adsorption on clean and oxidized Pt3Ti(111)

CO adsorption on clean and oxidized Pt₃Ti(111) surfaces has been investigated by means of Auger Electron Spectroscopy (AES), Thermal Desorption Spectroscopy (TDS), Low Energy Electron Diffraction (LEED) and High Resolution Electron Energy Loss Spectroscopy (HREELS). On clean Pt₃Ti(111) the LEED patterns after CO adsorption exhibit either a diffuse or a sharp c(4 × 2) structure (stable up to 300 K) depending on the adsorption temperature. Remarkably, the adsorption/desorption behavior of CO on clean Pt₃Ti(111) is similar to that on Pt(111) except that partial CO decomposition on Ti sites and partial CO oxidation have also been evidenced. Therefore, the clean surface cannot be terminated by a pure Pt plane. Partially oxidized Pt₃Ti(111) surfaces (< 135 L O₂ exposure at 1000 K) exhibit a CO adsorption/desorption behavior rather similar to that of the clean surface, showing again a c(4 × 2) structure (stable up to 250 K). Only the oxidation of CO is not detectable any more. These results indicate that some areas of the substrate remain non-oxidized upon low oxygen exposures. Heavily oxidized Pt₃Ti(111) surfaces (> 220 L O₂ exposure at 1000 K) allow no CO adsorption indicating that the titanium oxide film prepared under these conditions is completely closed.     

Co chemisorption on PtCu surfaces III. CO on PtCu(111)

Selected thermal desorption and valence band photoemission data on the chemisorption of CO on PtCu(111) surfaces are presented. The main objective is to make a comparison with CO chemisorption on an annealed (1 × 3) reconstructed Pt_0.98Cu_0.02(110) surface. The (111) alloy surfaces are unreconstructed (1 × 1) surfaces, with average near-surface Cu concentrations ranging from ? 7.5% to ? 20% as indicated by the Cu 920 eV Auger signal. It is observed that the effect of alloying Pt(111) with Cu is to progressively lower the desorption peak temperature and hence the free energy of CO desorption from Pt sites. A second observation is that the energy distribution of the Cu 3d-derived states is little affected by CO adsorption on Cu sites at 155 K. Both these results offer a contrast to the results for CO/Pt_0.98Cu_0.02(110) reported earlier.     

Formation of interface and surface oxides on supported Pd nanoparticles

We have quantitatively studied the interaction between oxygen and an Fe₃O₄-supported Pd model catalyst by molecular beam (MB) methods, time resolved IR reflection absorption spectroscopy (TR-IRAS) and photoelectron spectroscopy (PES) using synchrotron radiation. The well-shaped Pd particles were prepared in situ by metal evaporation and growth under ultrahigh vacuum (UHV) conditions on a well-ordered Fe₃O₄ film on Pt(1 1 1).It is found that for oxidation temperatures up to 450 K oxygen predominantly chemisorbs on metallic Pd whereas at 500 K and above (∼10⁻⁶ mbar effective oxygen pressure) large amounts of Pd oxide are formed. These Pd oxide species preferentially form a thin layer at the particle/support interface, stabilized by the iron-oxide support. Their formation and reduction is fully reversible. Upon decomposition, oxygen is released which migrates back onto the metallic part of the Pd surface. In consequence, the Pd interface oxide layer acts as an oxygen reservoir, the capacity of which by far exceeds the amount of chemisorbed oxygen on the metallic surface.Additionally, Pd surface oxides can also be formed at temperatures above 500 K. The extent of surface oxide formation critically depends on the oxidation temperature. This effect is addressed to different onset temperatures for oxidation of the particle facets and sites. It is shown that the presence of Pd surface oxides sensitively modifies the adsorption and reaction properties of the model catalyst, i.e. by lowering the CO adsorption energy and CO oxidation probability. Still, a complete reduction of the Pd surface oxides can be obtained by extended CO exposure, fully reestablishing the metallic Pd surface.     

Improved resolution in HREELS using maximum-entropy deconvolution: CO on PtxNi1−x(111)

High-resolution electron energy loss spectroscopy (HREELS) has been used to study stretch vibrations of CO chemisorbed at low coverage on Pt_xNi_1−x(111). Bayesian probability theory along with the entropic prior (Maxent) has been employed to deconvolve the apparatus function and to improve the apparent energy resolution. Maxent has proven very successful in a wide range of inversion problems. Here the resolution enhancement enables the positions of CO on the PtNi surface to be identified. It appears that CO is predominantly on top of Ni with the Ni atoms coordinated threefold laterally and with Ni in linear chains or on top of Pt. Furthermore, the ratio of the Pt to the Ni peak is used to study the dependence of the Pt concentration in the first layer on the annealing temperature.     

Surface characterization of supported Pt,Rh, and alloy particles by CO chemisorption

Temperature programmed desorption (TPD) of CO is used to determine surface areas, binding states, and changes upon oxidation for 10–1000 Å particles of Pt, Rh, and Pt-Rh alloy on amorphous SiO₂. A low area sample configuration is used to obtain rapid and uniform heating and cooling in an ultra-high vacuum system. It is shown that both metals exhibit a higher CO binding state for small particles, but, as particle size increases, this state disappears and is replaced by a more weakly bound state. These states are suggested to be associated with (111) and higher surface free energy planes on these surfaces, heating Rh above 700 K in O₂ at 10^?6 Torr produces an oxide on which the CO saturation coverage is at least a factor of 10 lower than on the reduced surface. For Pt, oxidation produces only a small decrease in CO coverage, although the binding energy of CO increases on the oxygen treated surface. The difference in desorption temperatures for CO on Pt and Rh is consistent with previous experiments which show that an oxidation-reduction cycle produces a surface layer which is enriched in Rh and that the oxidized alloy contains no Pt atoms.     

Ammonia activation on platinum {1 1 1}: A density functional theory study

By means of density functional theory calculations we have investigated the role of adsorbed atomic oxygen and adsorbed OH in the oxidation of ammonia on Pt{1 1 1}. We have investigated the dissociation of NH_3,ads, NH_2,ads and NH_ads on Pt{1 1 1} and the oxidation of these species by O_ads and OH_ads. We have done normal mode frequency analysis and work function calculations to characterise reactant, product and transition states. We have determined reaction energies, activation entropies, kinetic parameters and corrected total energies with the zero point energy. We have shown that O_ads only activates the dehydrogenation of NH_3,ads and that OH_ads activates the dehydrogenation of all NH_x,ads species and have reasoned this difference in activation by a bond order conservation principle. We have pointed out the importance of a zero point energy correction to the reaction energies and barriers. We have compared the calculated vibrational modes of the adsorbates with corresponding experimental EELS data. This has led to a revise of the frequency assignment of ν(Pt-OH₂), a revise in the identification of a NH₂ species on the Pt{1 1 1} surface after electron bombardment of pre-adsorbed NH₃ and the confirmation of an ammonia dimer binding model at the expense of a hollow site occupation by ammonia on the Pt{1 1 1} surface.     

The oxidation of CO on the Pt(100)-(5 × 20) surface

The kinetics of the CO oxidation reaction were examined on the Pt(100)-(5 × 20) surface under UHV conditions. The transient isothermal rate of CO₂ production was examined both for exposure of an oxygen-dosed surface to a beam of CO and for exposure of a CO-dosed surface to a beam of O₂. Langmuir-Hinshelwood kinetics were found to apply in both cases. For the reaction of CO with preadsorbed oxygen atoms, the reaction rate was dependent upon the square-root of the oxygen atom coverage, suggesting that oxygen atoms were adsorbed in islands on this surface. The oxidation of preadsorbed CO was observed only when the initial CO concentrations were less than 0.5 monolayer (c(2 × 2) structure), suggesting that the dissociative adsorption of oxygen required adjacent four-fold surface sites. The activation energy calculated for the reaction of CO with preadsorbed oxygen was 31.4 kcal/mol. This value was 30 kcal/mol greater than the activation energy measured for the reaction of O₂ with preadsorbed CO. Strong attractive interactions within the oxygen islands were at least partially responsible for this difference. The reaction kinetics in both cases changed dramatically below 300 K; this change is believed to be due to phase separation at the lower temperature.     

The mechanism of the CO2 formation on Pt(111) and polycrystalline surfaces at low temperatures

The mechanism of the reaction of oxygen with CO on Pt(111) and polycrystalline surfaces was studied at low temperatures, with reactive thermal desorption and isotope tracer techniques. Two CO₂ formation processes were observed. The first is the interaction between CO and oxygen admolecules, which takes place below 200 K. The second is the reaction of CO admolecules with oxygen adatoms. The desorption flux of the product CO₂ of both processes shows a very sharp angular distribution along the surface normal.     

Surface chemistry studied by in situ X-ray photoelectron spectroscopy

Time-dependent X-ray photoelectron spectroscopy is used to study the kinetics and dynamics of simple surface reactions. Combining high-resolution core level spectroscopy with a supersonic molecular beam in one experimental setup, processes such as the dissociative adsorption of methane on both Pt(111) and Ni(111), the coadsorption of water and CO on Pt(111), and the oxidation of CO on Pt(111) have been studied. In the case of methane, the observed vibrational fine structure in C 1s spectra is used to identify the adsorbed species (CH₃) and further thermal dehydrogenation steps. While simple dehydrogenation via CH is observed on Pt(111), a C–C coupling reaction to acetylene is found on Ni(111). In the coadsorbate phase, CO is found to be able to replace predosed water from the bilayer into multilayers. Water, in turn, leads to a site change of the CO molecules, which are preferably adsorbed at bridge sites in the presence of water, as opposed to on-top adsorption on clean Pt(111). For the truly bimolecular surface reaction, the CO oxidation on Pt(111), the ability of the molecular beam to create a relatively high CO pressure was found essential to study the kinetics of the basic step (CO+OCO₂) without influence of adsorption or diffusion rate. An activation energy of 0.53 eV and a preexponential factor of 5×10⁶ s^-1 are found. PACS 68.43.Mn; 79.60.Dp; 82.20.Pm     

Adsorption properties of CO on low-index Pt3Sn surfaces

The adsorption properties of CO on Pt₃Sn were investigated by utilizing quantum mechanical calculations. The (1 1 1), (1 1 0) and (0 0 1) surfaces of Pt₃Sn were generated with all possible bulk terminations, and on these terminations all types of active sites were determined. The adsorption energies and the geometries of the CO molecule at those sites were found. Those results were compared with the results obtained from the adsorption of CO on similar sites of Pt(1 1 1), Pt(1 1 0) and Pt(0 0 1) surfaces. The comparison reveals that adsorption of CO is stronger on Pt surfaces; this may be the reason why catalysts with Pt₃Sn phase do not suffer from CO posioning in experimental works. Aiming to understand the interactions between CO and the metal adsorption sites in detail, the local density of states (LDOS) profiles were produced for atop-Pt adsorption, both for the carbon end of CO for its adsorbed and free states, and for the Pt atom of the binding site. LDOS profiles of C of free and adsorbed CO and Pt for corresponding pure Pt surfaces, Pt(1 1 1), Pt(1 1 0) and Pt(0 0 1) were also obtained. The comparison of the LDOS profiles of Pt atoms of atop adsorption sites on the same faces of bare Pt₃Sn and Pt surfaces showed the effect of alloying with Sn on the electronic properties of Pt atoms. Comparison of LDOS profiles of the C end of CO in its free and atop adsorbed states on Pt₃Sn and LDOS of Pt on bare and CO adsorbed Pt₃Sn surface were used to clear out the electronic changes occurred on CO and Pt upon adsorption. The study showed that (i) inclusion of a Sn atom at the adsorption site structure causes dramatic decrease in stability which limits the number of possible CO adsorption sites on Pt₃Sn surface, (ii) the presence of Sn causes angles different from 180° for M-C-O orientation, (iii) the presence of Sn in the neighborhood of Pt on which CO is adsorbed causes superposition of the 5σ/1π derived-state peaks at the carbon end of CO and changes in adsorption energy of CO, (iv) Sn present beneath the adsorption site strengthens the CO adsorption, whereas neighboring Sn on the surface weakens it for all Pt₃Sn surfaces tested and (v) the most stable site for CO adsorption is the atop-Pt site of the mixed atom termination of Pt₃Sn(1 1 0).     

Control and enhancement of structural and magnetic properties of Co/Pd multilayer by seeded epitaxy

Effects of Co seed layer on the structural and magnetic properties of Co/Pd multilayers have been studied. Reflection high-energy electron diffraction measurements showed a possible control of the crystal orientation of Pd buffer layer from polycrystalline to face-centered cubic (111) orientation when using Co seed layer. Additionally, atomic force microscopy observations confirmed the ability of Co seed layer to flatten the Pd buffer layer drastically. In fact, the usage of Co seed layer has decreased the root-mean-square roughness from 2.3 to 0.23 nm. As for controlling the structural properties of Pd buffer layer, the effective perpendicular magnetic anisotropy constant was enhanced, mainly by the improvement of surface anisotropy. Electronic states of α-Al₂O₃(0001)/metal interface obtained by electron energy loss spectroscopy proved that these differences were the fruit of the interaction between the metal layer and oxygen atoms on the Al₂O₃(0001) surface.     

Partial and complete reduction of O2 by hydrogen on transition metal surfaces

The metal-catalyzed reduction of di-oxygen (O₂) by hydrogen is at the heart of direct synthesis of hydrogen peroxide (HOOH) and power generation by proton exchange membrane fuel cells. Despite its apparent simplicity, how the reaction proceeds on different metals is not yet well understood. We present a systematic study of O₂ reduction on the (111) facets of eight transition metals (Rh, Ir, Ni, Pd, Pt, Cu, Ag, and Au) based on periodic density functional theory (DFT-GGA) calculations. Analysis of ten surface elementary reaction steps suggests three selectivity regimes as a function of the binding energy of atomic oxygen (BE_O), delineated by the opposite demands to catalyze O–O bond scission and O–H bond formation: The dissociative adsorption of O₂ prevails on Ni, Rh, Ir, and Cu; the complete reduction to water via associative (peroxyl, peroxide, and aquoxyl) mechanisms prevails on Pd, Pt, and Ag; and HOOH formation prevails on Au. The reducing power of hydrogen is decreased electrochemically by increasing the electrode potential. This hinders the hydrogenation of oxygen species and shifts the optimal selectivity for water to less reactive metals. Our results point to the important role of the intrinsic reactivity of metals in the selectivity of O2 reduction, provide a unified basis for understanding the metal-catalyzed reduction of O₂ to H₂O and HOOH, and offer useful insights for identifying new catalysts for desired oxygen reduction products.     

In situ XPS study of Pd(1 1 1) oxidation. Part 1: 2D oxide formation in 10 mbar O2

The oxidation of the Pd(1 1 1) surface was studied by in situ XPS during heating and cooling in 3 × 10⁻³ mbar O₂. A number of adsorbed/dissolved oxygen species were identified by in situ XPS, such as the two dimensional surface oxide (Pd₅O₄), the supersaturated O_ads layer, dissolved oxygen and the R 12.2° surface structure.Exposure of the Pd(1 1 1) single crystal to 3 × 10⁻³ mbar O₂ at 425 K led to formation of the 2D oxide phase, which was in equilibrium with a supersaturated O_ads layer. The supersaturated O_ads layer was characterized by the O 1s core level peak at 530.37 eV. The 2D oxide, Pd₅O₄, was characterized by two O 1s components at 528.92 eV and 529.52 eV and by two oxygen-induced Pd 3d_5/2 components at 335.5 eV and 336.24 eV. During heating in 3 × 10⁻³ mbar O₂ the supersaturated O_ads layer disappeared whereas the fraction of the surface covered with the 2D oxide grew. The surface was completely covered with the 2D oxide between 600 K and 655 K. Depth profiling by photon energy variation confirmed the surface nature of the 2D oxide. The 2D oxide decomposed completely above 717 K. Diffusion of oxygen in the palladium bulk occurred at these temperatures. A substantial oxygen signal assigned to the dissolved species was detected even at 923 K. The dissolved oxygen was characterised by the O 1s core level peak at 528.98 eV. The “bulk” nature of the dissolved oxygen species was verified by depth profiling.During cooling in 3 × 10⁻³ mbar O₂, the oxidised Pd²⁺ species appeared at 788 K whereas the 2D oxide decomposed at 717 K during heating. The surface oxidised states exhibited an inverse hysteresis. The oxidised palladium state observed during cooling was assigned to a new oxide phase, probably the R 12.2° structure.     

Vibrational EELS,XPS and UPS study of CO chemisorbed on Pt10Ni90(111): Evidence for the existence of different sites

CO adsorption on the (111) face of a Pt₁₀Ni₉₀ alloy single crystal has been investigated at room temperature by vibrational electron energy loss spectroscopy (EELS) and photoelectron spectroscopy (XPS and UPS). Two well separated CO stretching modes develop at 2070 and 1820 ± 10 cm^?1, with their intensities reaching 64 and 36% respectively of the total intensity at saturation coverage. They are attributed to CO adspecies in terminal and bridge bonded configuration respectively. The UPS spectra of 4σ, 5σ and 1π molecular orbitais of adsorbed CO show complex features which may be resolved into two components having the main characteristics of CO adsorbed on pure Pt(111) and Ni(111) respectively. Such behaviour is also observed by XPS on C 1s on O 1s peaks. Their respective contributions, in both XPS and UPS spectra are about 64 and 36% of the whole spectrum. Finally compared to Ni(111) — on which CO adsorbs mainly in bridge configuration — the alloying with 10% Pt has generated the appearance of a large number of new sites for CO chemisorption associated with the presence of Pt atoms at the surface. The large amount of terminal CO adspecies is interpreted in terms of considerable surface enrichment of the alloy in platinum.     

Catalytic Reaction Mechanism Testing

Experimental tests for determining the mechanism of catalytic reactions were suggested. Quantitative relations were obtained that allowed the mechanism of formation of product molecules in an arbitrary catalytic reaction to be determined by isothermic relaxation methods. The relations found were compared with the literature data on the 2CO + O₂ → 2CO₂ reaction on the (111) surface of Pd. The experimental data were shown to be insufficient for the unambiguous determination of the mechanism of this reaction. The results available corresponded to the participation of physically adsorbed CO molecules in the formation of CO₂. The temperature dependence of the reaction rate was determined by the transition of strongly adsorbed oxygen atoms into the mobile reactive state.     

Interfacial properties of Ce<Subscript>0.75</Subscript>Zr<Subscript>0.25</Subscript>O<Subscript>2</Subscript> supported noble metals (Pd,Pt) from first principles

First-principles electronic structure calculations of noble metals (NM=Pd, Pt)/Ce_0.75Zr_0.25O₂ systems are presented. It is found that: the NM adatoms do not prefer to stay at the atop or the bridge sites of the cations (Ce and Zr), but prefer to be adsorbed at or around the anion sites. The most preferable adsorption sites for both the Pd and Pt adatoms are the O-bridge sites neighboring the Zr dopant. The Pt adatom show much stronger interaction with the Ce_0.75Zr_0.25O₂(111) surface than does the Pd adatom. The interactions of the NM/Ce_0.75Zr_0.25O₂(111) interfaces are stronger than those of the corresponding NM/ceria(111) interfaces. There are some metal induced gap states (MIGS) appeared in the gaps of the NM/Ce_0.75Zr_0.25O₂(111) interfaces, which are important to catalytic properties of the NM/Ce_0.75Zr_0.25O₂(111) catalysts.