Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Machine Learning towards Screening Solid-state Lithium Ion Conductors

Machine learning is an emerging method to discover new materials with specific characteristics.An unsupervised machine learning research is highlighted to discover new potential lithium ionic conductors by screening and clustering lithium compounds,providing inspirations for the development of solid-state electrolytes and practical batteries.     

Surface defect-rich ceria quantum dots anchored on sulfur-doped carbon nitride nanotubes with enhanced charge separation for solar hydrogen production

Designing defect-engineered semiconductor heterojunctions can effectively promote the charge carrier separation.Herein,novel ceria(CeO2) quantum dots(QDs) decorated sulfur-doped carbon nitride nanotubes(SCN NTs) were synthesized via a thermal polycondensation coupled in situ depositionprecipitation method without use of template or surfactant.The structure and morphology studies indicate that ultrafine CeO2 QDs are well distributed inside and outside of SCN NTs offering highly dispersed active sites and a large contact interface between two components.This leads to the promoted formation of rich Ce³⁺ ion and oxygen vacancies as confirmed by XPS.The photocatalytic performance can be facilely modulated by the content of CeO2 QDs introduced in SCN matrix while bare CeO2 does not show activity of hydrogen production.The optimal catalyst with 10% of CeO2 loading yields a hydrogen evolution rate of 2923.8 μmol h-1 g-1 under visible light,remarkably higher than that of bare SCN and their physical mixtures.Further studies reveal that the abundant surface defects and the created 0 D/1 D junctions play a critical role in improving the separation and transfer of charge carriers,leading to superior solar hydrogen production and good stability.     

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^-2 delivers a stable area capacity of 6.6 mAh cm^-2 over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^-2 over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

Boost oxygen reduction reaction performance by tuning the active sites in Fe-N-P-C catalysts

Cost-effective atomically dispersed Fe-N-P-C complex catalysts are promising to catalyze the oxygen reduction reaction(ORR)and replace Pt catalysts in fuel cells and metal-air batteries.However,it remains a challenge to increase the number of atomically dispersed active sites on these catalysts.Here we report a highly efficient impregnation-pyrolysis method to prepare effective ORR electrocatalysts with large amount of atomically dispersed Fe active sites from biomass.Two types of active catalyst centers were identified,namely atomically dispersed Fe sites and Fe_xP particles.The ORR rate of the atomically dispersed Fe sites is three orders of magnitude higher than it of Fe_xP particles.A linear correlation between the amount of the atomically dispersed Fe and the ORR activity was obtained,revealing the major contribution of the atomically dispersed Fe to the ORR activity.The number of atomically dispersed Fe increases as the Fe loading increased and reaching the maximum at 1.86 wt%Fe,resulting in the maximum ORR rate.Optimized Fe-N-P-C complex catalyst was used as the cathode catalyst in a homemade Zn-air battery and good performance of an energy density of 771 Wh kgZn^-1,a power density of 92.9 m W cm^-2 at 137 m A cm^-2 and an excellent durability were exhibited.     

Regulation of carbon distribution to construct high-sulfur-content cathode in lithium-sulfur batteries

Lithium-sulfur(Li-S)battery is regarded as one of the most promising next-generation energy storage systems due to the ultra-high theoretical energy density of 2600 Wh kg^-1.To address the insulation nature of sulfur,nanocarbon composition is essential to afford acceptable cycling capacity but inevitably sacrifices the actual energy density under working conditions.Therefore,rational structural design of the carbon/sulfur composite cathode is of great significance to realize satisfactory electrochemical performances with limited carbon content.Herein,the cathode carbon distribution is rationally regulated to construct high-sulfur-content and high-performance Li-S batteries.Concretely,a double-layer carbon(DLC)cathode is prepared by fabricating a surface carbon layer on the carbon/sulfur composite.The surface carbon layer not only provides more electrochemically active surfaces,but also blocks the polysulfide shuttle.Consequently,the DLC configuration with an increased sulfur content by nearly 10 wt%renders an initial areal capacity of 3.40 mAh cm^-2 and capacity retention of 83.8%during 50 cycles,which is about two times than that of the low-sulfur-content cathode.The strategy of carbon distribution regulation affords an effective pathway to construct advanced high-sulfur-content cathodes for practical high-energy-density Li-S batteries.     

Confined Ni-In intermetallic alloy nanocatalyst with excellent coking resistance for methane dry reforming

Carbon dioxide and methane are two main greenhouse gases which are contributed to serious global warming.Fortunately,dry reforming of methane(DRM),a very important reaction developed decades ago,can convert these two major greenhouse gases into value-added syngas or hydrogen.The main problem retarding its industrialization is the seriously coking formation upon the nickel-based catalysts.Herein,a series of confined indium-nickel(In-Ni)intermetallic alloy nanocatalysts(In_xNi@SiO₂)have been prepared and displayed superior coking resistance for DRM reaction.The sample containing 0.5 wt.%of In loading(In_0.5Ni@SiO₂)shows the best balance of carbon deposition resistance and DRM reactivity even after 430 h long term stability test.The boosted carbon resistance can be ascribed to the confinement of core–shell structure and to the transfer of electrons from Indium to Nickel in In-Ni intermetallic alloys due to the smaller electronegativity of In.Both the silica shell and the increase of electron cloud density on metallic Ni can weaken the ability of Ni to activate C–H bond and decrease the deep cracking process of methane.The reaction over the confined InNi intermetallic alloy nanocatalyst was conformed to the Langmuir-Hinshelwood(L-H)mechanism revealed by in situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRIFTS).This work provides a guidance to design high performance coking resistance catalysts for methane dry reforming to efficiently utilize these two main greenhouse gases.     

吡啶、CO和SO2在Al2O3/SiO2混合氧化物复合纳米晶上的TPD

程序升温脱附;吡啶、CO和SO2在Al2O3/SiO2混合氧化物复合纳米晶上的TPD     

硬脂酸法制备SO42-/Fe2O3-SiO2固体酸及其催化性能的初步探讨

首次用硬脂法制备了Fe2O3-SiO2混合氧化物,经浸渍H2SO4后再焙烧得SO4^2-/Fe2O3-SiO2固体酸催化剂。用TEM,XRD,N2吸附/脱附和TG-DTA等手段对其进行了表征,结果显示制得的Fe2O3-SiO2混合氧化物具有多孔结构,且随着Si含量的增大,其比表面积明显增大,但孔径减小。用乙酸/丁醇酯化催化反应评估了该固体酸的催化性能。     

以水滑石类化合物为前体的Co-M-Al(M=过渡金属)复合氧化物 对催化消除NO~x活 性的研究

以共沉淀法制提得的水滑石类化合物为催化剂前体,经焙烧可得到一系列尖晶石类化合物Co-M-Al[M=Cr,Mn,Fe,Ni,Cu;n(Co):n(M):n(Al)=3:1:1].通过XRD,比表面测定,化学分析,NO吸附等方法对其进行表征,测定了此系列催化剂对NO催化还原和催化分解的活性,结果发现此系列催化对消除NO具有很高的活性.同时对催化消除NO的机理及过渡金属离子中d轨道电子对催化活性的影响进行了一些探讨。     

XRD and TPR Studies of Cu-Al Hydrotalcite Derived Highly Dispersed Mixed Metal Oxides

A series of Cu/Al catalysts, containing different proportions of copper and aluminium, have been prepared by coprecipitation using metal nitrate precursors and Na₂CO₃. The dried precipitate catalyst precursors were characterized by X-ray diffraction (XRD) to show the presence of Cu-Al binary hydrotalcite-like phase. The dried precipitates were calcined at 873 K for 3 h. The calcined catalysts were characterized by XRD and temperature-programmed reduction (TPR) methods to show the presence of unidentified mixed oxides. The results showed that the extent of metal-support interaction increased with copper loading due to the mixed oxides formed from the hydrotalcite-type phase during calcination. High dispersion of the mixed metal oxides was indicated by comparison with similar studies on Cu-Al catalysts, prepared by similar methods, whose precursors showed no hydrotalcite formation.     

Preparation of TiO2–ZrO2 mixed oxides with controlled acid–basic properties

Titania–zirconia mixed oxides with various ZrO₂ content in TiO₂ (10, 50 and 90 wt.%) were prepared by the sol–gel method. High specific surface areas (77–244 m²/g) were obtained. Acidity determined by NH₃-TPD and FTIR-pyridine adsorption showed that in mixed oxides the number of acid sites is dramatically increased; it varies from 173 μmol NH₃/g for TiO₂ to 1226–1456 μmol NH₃/g for the mixed oxides. FTIR-pyridine adsorption showed the presence of Lewis sites in the catalysts. Basic sites were identified by FTIR-CO₂ adsorption, suggesting the formation of mixed oxides with acid–basic properties. XRD spectra identified anatase in the TiO₂ rich region, amorphous material in the mixed oxide 50–50 TiO₂–ZrO₂ and tetragonal and monoclinic crystalline phases in the ZrO₂ rich region. Activity in the isopropanol decomposition showed a good correlation between the acid–basic properties and the selectivity to propene, acetone and isopropyl ether. The latter was found as a product which mainly depends of the acid sites density.     

The Solid-State-Grinding Synthesis of Maganese-Modified Cobalt Oxides and Application in the Low-Temperature CO Preferential Oxidation in H<Subscript>2</Subscript>-Rich Gases

A series of MnOx modified cobalt oxides with different atomic molar ratios of Mn/(Mn?+?Co) were prepared by a soft reactive grinding route and investigated for CO preferential oxidation in H₂. It was found that as-prepared Mn-doped cobalt oxides exhibited superior activity compared to the single constituted oxides, other Mn–Co–O mixed oxides synthesized by solution-based route, and other grinding-derived mixed metal oxides M–Co–O (M?=?Zn, Ni, Cu, Fe). The grinding-derived MnCo10 catalyst with Mn/(Mn?+?Co) molar ration of 10% showed the best CO oxidation activity and higher selectivity at low temperature. The surface richness of Co³⁺ was not found as increasing the Mn molar ratio in the present work. However, the incoporation of MnOx with proper amount into Co₃O₄ could produce high surface area, high structure defects, and rich surface active oxygen species, while the ability to supply the active oxygen species was suggested to play the crucial role in promoting the catalytic performance of Mn–Co–O mixed oxides.     

Sol–gel synthesis, characterization, and catalytic activity of Fe(III) titanates

Nanostructured iron–titanium mixed oxides with different Fe/Ti ratios were prepared by sol–gel methods under different preparative conditions. When equal molar amounts of Fe and Ti ions were employed, the product calcined at 500 °C showed an X-ray diffraction pattern that resembles Fe₂Ti₃O₉. On the other hand, lower Fe/Ti ratios favored the formation of Fe₂TiO₅ while higher ratios resulted in free α-Fe₂O₃ and TiO₂. Besides the effect of the Fe/Ti ratio, the composition of the final product was dependent on the preparative conditions and the calcination temperature. Enhancing the gelation process by heating or by employing an acid catalyst favored the formation of Fe₂TiO₅ at relatively low temperatures. Compared with the corresponding pure oxides, the prepared iron–titanium mixed oxides showed modified textural characteristics which were also dependent on the composition and the calcination temperature. The mixed oxides showed higher catalytic activity in the oxidation of methanol than their corresponding pure oxides with a noticeable enhanced oxidation potential forming methyl formate and carbon dioxide.     

钙钛矿型LaNiO3、LaMnO3的形成条件

用混合硝酸盐分解法和柠檬酸络合法分别制取了单一钙铁矿型多晶粉末LaNiO_3和LaMnO_3. XRD分析表明LaNiO_3的形成经历了混合氧化物转化为LaNiO_3的同相反应; 而LaMnO_3晶相直接由无定形相转化而来。根据DTA、TG、IR分析两者的形成, NO_3~-离子都起了重要作用. 同时讨论了络合剂柠檬酸的作用.     

费-托合成Co/ZrO2-Al2O3催化剂反应性能的研究

以ZrOCl2·6H2O和AlCl3为原料,采用共沉淀方法制得一系列不同ZrO2质量分数的ZrO2-Al2O3混合氧化物载体;并以该混合氧化物为载体,采用初湿浸渍法制得钴质量分数为12％的Co/ZrO2-Al2O3催化剂。XRD、NH3-TPD、TPR和原位IR等表征结果表明,随着混合载体中ZrO2质量分数的增加,载体比表面积先增加后减少,混合载体的平均孔径则小于单一氧化物ZrO2和Al2O3的平均孔径。ZrO2和Al2O3载体混合后会导致氧化物的比表面积和酸性增大并且有新的物相生成。当混合氧化物用作载体时,能够抑制载体表面金属钴的分散,改变催化剂的还原行为,降低催化剂对CO物种的吸附能力。CO加氢反应表明,与单一金属氧化物相比,钴负载ZrO2-Al2O3混合氧化物催化剂的加氢活性和重质烃选择性有所降低。     

Synthesis and Characterization of Spinel‐Type Gallia‐Alumina Solid Solutions

By precipitation with ammonia of ethanolic solutions containing the appropriate proportions of gallium and aluminium nitrate, following by calcination of the resulting gels at 773 K, mixed Ga₂O₃/Al₂O₃ oxides having Ga:Al ratios of 9:1, 4:1, 1:1, 1:4 and 1:9 were obtained. Powder X‐ray diffraction showed that these mixed metal oxides form a series of solid solutions having the spinel‐type structure; also shown by γ‐Al₂O₃ and γ‐Ga₂O₃. The specific surface area (determined by nitrogen adsorption at 77 K) was found to range from 160 m² g^?1 for the mixed oxide having Ga:Al = 9:1 up to 370 m² g^?1 for that having Ga:Al = 1:9. High resolution MAS NMR showed that Ga³⁺ and Al³⁺ ions occur at both tetrahedral and octahedral sites in the spinel‐type structure of the mixed metal oxides, although there is a preferential occupation of tetrahedral sites by Ga³⁺ ions. A proportion of penta‐coordinated Al³⁺ ions was also found. IR spectra of carbon monoxide adsorbed at 77 K showed that the mixed metal oxides have a considerable Lewis acidity, related mainly to tetrahedrally coordinated metal ions exposed at crystal surfaces. The characteristic infrared absorption band of coordinated (adsorbed) CO appears in the range 2205–2190 cm^?1, and its peak wavenumber is nearly independent of Ga:Al ratio in the mixed gallia‐alumina oxides.