Mixed convection boundary layer flow over a permeable vertical surface with prescribed wall heat flux

The effects of suction/injection on the laminar mixed convection boundary-layer flow on a vertical wall with a prescribed heat flux are considered. The conditions which allow the equations to be reduced to similarity form are derived and numerical solutions of the resulting equations are obtained for a range of values of the suction/injection and buoyancy parameters. Two specific cases, corresponding to a stagnation point flow and uniform wall heat flux, are treated in detail. Results are presented in terms of the skin friction and wall temperature with a selection of velocity and temperature profiles also being given. Dual solutions are found to exist for assisting flow, these are an addition to what has been reported previously for opposing flows. Solutions for some limiting values of the parameters are also derived.      

Dual solutions in mixed convection boundary-layer flow with suction or injection

The effect of suction/injection on the laminar mixed convectionboundary-layer flow about a vertical wall in an incompressibleviscous fluid is considered. The similarity solutions are obtainedfor some values of the suction/injection parameter as well asthe mixed convection parameter for three particular cases: uniformtemperature, uniform heat flux and stagnation flow. The resultingsystem of non-linear ordinary differential equations is solvednumerically for both assisting and opposing flow regimes usinga finite-difference scheme known as the Keller box method. Numericalresults are obtained for the skin friction coefficient and localNusselt number as well as velocity and temperature profiles.The effects of the involved parameters on the skin frictioncoefficient and the local Nusselt number characteristics arediscussed. It is found that dual solutions exist for assistingflow, besides that usually reported in the literature for opposingflow.     

Similarity solution of boundary layer stagnation-point flow towards a heated porous stretching sheet saturated with a nanofluid with heat absorption/generation and suction/blowing: A Lie group analysis

In this paper, heat and mass transfer analysis for boundary layer stagnation-point flow over a stretching sheet in a porous medium saturated by a nanofluid with internal heat generation/absorption and suction/blowing is investigated. The governing partial differential equation and auxiliary conditions are converted to ordinary differential equations with the corresponding auxiliary conditions via Lie group analysis. The boundary layer temperature, concentration and nanoparticle volume fraction profiles are then determined numerically. The influences of various relevant parameters, namely, thermophoresis parameter Nt, Brownian motion parameter Nb, Lewis number Le, suction/injection parameter S, permeability parameter k₁, source/sink parameter λ and Prandtl parameter Pr on temperature and concentration as well as wall heat flux and wall mass flux are discussed. Comparison with published results is presented.     

Similarity solutions for mixed convection boundary layer flow over a permeable horizontal flat plate

The effects of suction and injection on steady laminar mixed convection boundary layer flow over a permeable horizontal flat plate in a viscous and incompressible fluid is investigated in this paper. The similarity solutions of the governing boundary layer equations are obtained for some values of the suction and injection parameter f₀, the constant exponent n of the wall temperature as well as the mixed convection parameter λ. The resulting system of nonlinear ordinary differential equations is solved numerically for both assisting and opposing flow regimes using a finite-difference scheme known as the Keller-box method. Numerical results for the reduced skin friction coefficient, the reduced local Nusselt number, and the velocity and temperature profiles are obtained for various values of the parameters considered. Dual solutions are found to exist for the opposing flow.     

The study of Heat and Mass Transfer in a Visco elastic fluid due to a continuous stretching surface using Homotopy Analysis Method

In this paper, an approximate analytical solution is derived for the flow velocity and temperature due to the laminar, two-dimensional flow of non-Newtonian incompressible visco elastic fluid due to a continuous stretching surface. The surface is stretched with a velocity proportional to the distance $x$ along the surface. The surface is assumed to have either power-law heat flux or power-law temperature distribution. The presence of source/sink and the effect of uniform suction and injection on the flow are considered for analysis. An approximate analytical solution has been obtained using Homotopy Analysis Method(HAM) for various values of visco elastic parameter, suction and injection rates. Optimal values of the convergence control parameters are computed for the flow variables. It was found that the computational time required for averaged residual error calculation is very very small compared to the computation time of exact squared residual errors. The effect of mass transfer parameter, visco elastic parameter, source/sink parameter and the power law index on flow variables such as velocity, temperature profiles, shear stress, heat and mass transfer rates are discussed.     

Heat transfer of a generalized stretching/shrinking wall problem with convective boundary conditions

In this paper, we investigate the heat transfer of a viscous fluid flow over a stretching/shrinking sheet with a convective boundary condition. Based on the exact solutions of the momentum equations, which are valid for the whole Navier–Stokes equations, the energy equation ignoring viscous dissipation is solved exactly and the effects of the mass transfer parameter, the Prandtl number, and the wall stretching/shrinking parameter on the temperature profiles and wall heat flux are presented and discussed. The solution is given as an incomplete Gamma function. It is found the convective boundary conditions results in temperature slip at the wall and this temperature slip is greatly affected by the mass transfer parameter, the Prandtl number, and the wall stretching/shrinking parameters. The temperature profiles in the fluid are also quite different from the prescribed wall temperature cases.     

Influence of temperature-dependent viscosity and thermal radiation on MHD forced convection over a non-isothermal wedge

An analysis has been carried out to study heat transfer characteristics of an incompressible Newtonian electrically conducting and heat generating/absorbing fluid having temperature-dependent viscosity over a non-isothermal wedge in the presence of thermal radiation. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The wedge surface is assumed to be permeable so as to allow for possible wall suction or injection. The effects of viscous dissipation, Joule heating, stress work and thermal radiation are included in the model. The governing differential equations are derived and transformed using a non-similarity transformation. The transformed equations are solved numerically by applying a fifth-order Runge-Kutta-Fehlberg scheme with shooting technique. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results for the velocity and temperature profiles for a prescribed magnetic field parameter as well as the development of the local skin-friction coefficient and local Nusselt number with the magnetic field and radiation parameters are presented graphically and in tabulated form to elucidate the influence of the various physical parameters.     

Hall current effect on MHD mixed convection flow from an inclined continuously stretching surface with blowing/suction and internal heat generation/absorption

Hydromagnetic heat transfer by mixed convection along an inclined continuously stretching surface, with power-law variation in the surface temperature or heat flux, in the presence of Hall current and internal heat generation/absorption has been studied. The surface is considered to be permeable to allow fluid suction or blowing, and stretching with a surface velocity varied according to a power-law. Two cases of the temperature boundary conditions were considered at the surface. The governing equations have been transformed into non-similar partial differential equations which have been integrated by the forth-order Runge–Kutta method. The effect of Hall parameter, magnetic parameter, dimensionless blowing/suction parameter, space and temperature dependent internal heat generation/absorption parameters and buoyancy force parameters on the temperature, primary and secondary flow velocity have been studied parametrically. All parameters involved in the problem affect the flow and thermal distributions except the temperature-dependent internal heat generation/absorption in the case of prescribed heat flux (PHF). Numerical values of the local skin-friction and the local Nusselt numbers for various parametric conditions have been tabulated.     

Entropy generation under the effect of suction/injection

This work investigates entropy generation in a steady flow of viscous incompressible fluids between two infinite parallel porous plates. The fluid temperature variation is due to asymmetric heating of the porous plates as well as viscous dissipation. Two different physical situations are discussed with their entropy generation profiles: (i) Couette flow with suction/injection and (ii) pressure-driven Poiseuille flow with suction/injection. In each case, closed form expressions for entropy generation number and Bejan number are derived in dimensionless form by using the expressions for velocity and temperature which are derived by solving the resulting momentum and energy equations by the method of undetermined coefficient. The effect of the governing parameters on velocity, temperature, entropy generation and Bejan number are extensively discussed with the help of graphs. It is interesting to remark that entropy generation number increases with suction on one porous plate while it decreases on the other porous plate with injection.     

Convective heat transfer in a conducting fluid over a permeable stretching surface with suction and internal heat generation/absorption

We consider a convective flow in a porous medium of an incompressible viscous conducting fluid impinging on a permeable stretching surface with suction, and internal heat generation/absorption. Using a similarity transformation the governing equations of the problem are reduced to a coupled third-order nonlinear ordinary differential equations. We first examine a number of special cases for which we may obtain exact solutions. We then obtain analytical solutions (by the Homotopy Analysis Method) and numerical solutions (by a boundary value problem solver), in order to further study the behavior of the nonlinear differential equations, for various values of the physical parameters. Our numerical solutions are shown to agree with the available results in the literature. We then employ the numerical results to bring out the effects of the suction parameter, heat source/sink parameter, stretching parameter, porosity parameter, the Prandtl number and the free convection parameter on the flow and heat transfer characteristics. In the absence of suction and free convection, our findings are in agreement with the corresponding numerical results of Attia [H.A. Attia, On the effectiveness of porosity on stagnation point flow towards a stretching surface with heat generation, Comput. Mater. Sci. 38 (2007) 741-745].     

Exact solution of thermal radiation on MHD flow over a stretching porous sheet

The effect of radiation on MHD steady asymmetric flow of an electrically conducting fluid past a stretching porous sheet in the presence of radiation has been analyzed. Exact solutions for the velocity and temperature fields have been derived and the effects of radiation, magnetic, Prandtl number, wall temperature and suction (or injection) parameters have been studied with the help of graphs.     

Unsteady MHD stagnation-point flow with heat and mass transfer in a micropolar fluid in the presence of thermophoresis and suction/injection

The effect of suction or injection on unsteady MHD flow with heat and mass transfer in a micropolar fluid near the forward stagnation point flow with thermophoresis has been investigated. The problem is reduced to a system of non-dimensional partial differential equations, which are solved numerically using the implicit finite-difference scheme. Profiles for velocity, microrotation, temperature and concentration as well as the skin friction, the rate of heat and mass transfer are determined and presented graphically for physical parameters. The results show that the suction increases the skin friction, the rate of heat and mass transfer while opposite trend is observed for the case of injection. It is also found that the effect of thermophoresis is decrease the concentration boundary layer thickness.     

Effect of the chemical reaction and radiation absorption on the unsteady MHD free convection flow past a semi infinite vertical permeable moving plate with heat source and suction

Analytical solutions for heat and mass transfer by laminar flow of a Newtonian, viscous, electrically conducting and heat generation/absorbing fluid on a continuously vertical permeable surface in the presence of a radiation, a first-order homogeneous chemical reaction and the mass flux are reported. The plate is assumed to move with a constant velocity in the direction of fluid flow. A uniform magnetic field acts perpendicular to the porous surface, which absorbs the fluid with a suction velocity varying with time. The dimensionless governing equations for this investigation are solved analytically using two-term harmonic and non-harmonic functions. Graphical results for velocity, temperature and concentration profiles of both phases based on the analytical solutions are presented and discussed.     

Numerical study of mixed convection flow of a micropolar fluid towards permeable vertical plate with convective boundary condition

In this article, the mixed convective flow of a micropolar fluid along a permeable vertical plate under the convective boundary condition is analyzed. The scaling group of transformations is applied to get the similarity representation of the system of partial differential equations of the problem and then the resulting equations are solved by using Spectral Quasi-Linearisation Method. This study reveals that the dual solutions exists for certain values of mixed convection parameter. The outcomes are analyzed with dual solutions in detail. Effects of micropolar parameter, Biot number and suction/injection parameters on different flow profiles are discussed and depicted graphically.     

Effects of chemical reaction and variable viscosity on hydromagnetic mixed convection heat and mass transfer for Hiemenz flow through porous media with radiation

The effect of chemical reaction and variable viscosity on hydromagnetic mixed convection heat and mass transfer for Hiemenz flow through porous media has been studied in the presence of radiation and magnetic field. The plate surface is embedded in a uniform Darcian porous medium in order to allow for possible fluid wall suction or blowing and has a power-law variation of both the wall temperature and concentration. The similarity solution is used to transform the system of partial differential equations, describing the problem under consideration, into a boundary value problem of coupled ordinary differential equations, and an efficient numerical technique is implemented to solve the reduced system. Numerical calculations are carried out, for various values of the dimensionless parameters of the problem, which include a variable viscosity, chemical reactions, radiation, magnetic field, porous medium and power index of the wall temperature parameters. Comparisons with previously published works are performed and excellent agreement between the results is obtained. The results are presented graphically and the conclusion is drawn that the flow field and other quantities of physical interest are significantly influenced by these parameters.     

A note on the similarity equations arising in free convection boundary layers with blowing and suction

The similarity equations for the free convection boundary-layer flow on a vertical plate with prescribed wall temperature and transpiration velocity are considered. The range of existence of solution is discussed first. For blowing this is seen to be independent of the transpiration parameter , depending only on the Prandtl number. For suction this range of existence of solutions is seen to depend on as well. Asymptotic solutions for strong suction and strong blowing are derived and compared with numerical solutions of the similarity equations.     

流过半无限竖直可渗透壁面时的磁流体动力学自由对流

研究不可压缩粘性导电流体,流过半无限竖直可渗透平板时,将其偏微分形式的流动和传热的基本控制方程,应用适当的相似变换,简化为非线性的常微分方程组．对两种抽吸参数:大的和小的抽吸参数,采用摄动法得到变换后方程的近似解．数值结果表明,随着磁场参数和抽吸参数的增大,任意点的速度场在减小;磁场参数的影响,引起热边界层厚度的增大;速度和温度场随着热汇参数的增大而减小．     

Heat transfer in a Walter’s liquid B fluid over an impermeable stretching sheet with non-uniform heat source/sink and elastic deformation

In this present article an analysis is carried out to study the boundary layer flow behavior and heat transfer characteristics in Walter’s liquid B fluid flow. The stretching sheet is assumed to be impermeable, the effects of viscous dissipation, non-uniform heat source/sink in the presence and in the absence of elastic deformation (which was escaped from attention of researchers while formulating the viscoelastic boundary layer flow problems)on heat transfer are addressed. The basic boundary layer equations for momentum and heat transfer, which are non-linear partial differential equations, are converted into non-linear ordinary differential equations by means of similarity transformation. Analytical solutions are obtained for the resulting boundary value problems. The effects of viscous dissipation, Prandtl number, Eckert number and non-uniform heat source/sink on heat transfer (in the presence and in the absence of elastic deformation) are shown in several plots and discussed. Analytical expressions for the wall frictional drag coefficient, non-dimensional wall temperature gradient and non-dimensional wall temperature are obtained and are tabulated for various values of the governing parameters. The present study reveals that, the presence of work done by deformation in the energy equation yields an augment in the fluid’s temperature.     

Effect of suction/injection on free convection along a vertical plate in a nanofluid saturated non-Darcy porous medium with internal heat generation

The effect of internal heat generation on free convection along a vertical plate embedded in a nanofluid saturated non-Darcy porous medium in the presence of suction/injection is analyzed. The non-linear governing equations and their associated boundary conditions are initially cast into dimensionless forms by non-dimensional variables. The resulting equations are solved numerically by an accurate, implicit, iterative finite-difference methodology and the obtained results are compared favorably with previously published work. A parametric study is performed to illustrate influence of the temperature exponent, non-Darcy, suction/injection, Brownian motion and thermophoresis parameters on the profiles of the velocity components, temperature and nanoparticle volume fraction. The numerical data for the heat and nanoparticle mass transfer rates have been tabulated for various parametric conditions.     

Unsteady convective boundary layer flow of a viscous fluid at a vertical surface with variable fluid properties

In this paper we present numerical solutions to the unsteady convective boundary layer flow of a viscous fluid at a vertical stretching surface with variable transport properties and thermal radiation. Both assisting and opposing buoyant flow situations are considered. Using a similarity transformation, the governing time-dependent partial differential equations are first transformed into coupled, non-linear ordinary differential equations with variable coefficients. Numerical solutions to these equations subject to appropriate boundary conditions are obtained by a second order finite difference scheme known as the Keller-Box method. The numerical results thus obtained are analyzed for the effects of the pertinent parameters namely, the unsteady parameter, the free convection parameter, the suction/injection parameter, the Prandtl number, the thermal conductivity parameter and the thermal radiation parameter on the flow and heat transfer characteristics. It is worth mentioning that the momentum and thermal boundary layer thicknesses decrease with an increase in the unsteady parameter.