载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

Conformation dependence of pKa’s of the chromophores from the purple asFP595 and yellow zFP538 fluorescent proteins

Two members of the green fluorescent protein family, the purple asFP595 and yellow zFP538 proteins, are perspective fluorescent markers for use in multicolor imaging and resonance energy-transfer applications. We report the results of quantum based calculations of the solution pK_a values for selected protonation sites of the denatured asFP595 and zFP538 chromophores in the trans- and cis-conformations in order to add in the interpretation of photo-physical properties of these proteins. The pK_a values were determined from the theromodynamic cycle based on B3LYP/6-311++G(2df, 2p) calculations of the gas phase free energies of the molecules and the B3LYP/6-311++G(d, p) calculations of solvation energies. The results show that the pK_a’s of the protonation sites of the chromophore from asFP595 noticeably depend on the isomer conformation (cis- or trans-), while those of zFP538 are much less sensitive to isomerization.     

Adsorption of p-Nitrophenol in Untreated and Treated Activated Carbon

The adsorption of p-nitrophenol in one untreated activated carbon (F100) and three treated activated carbons (H₂, H₂SO₄ and Urea treated F100) was carried out at undissociated and dissociated conditions.To characterize the carbon, N₂ and CO₂ adsorption were used. X-ray Photoelectron Spectroscopy (XPS) was used to analyze the surface of the activated carbon.The experimental isotherms are fitted via the Langmuir homogenous model and Langmuir binary model. Variation of the model parameters with the solution pH is studied. Both Q _max and the adsorption affinity coefficient (K ₁) were dependent on the PZC of the carbons and solution pH. The Effect of pH must be considered due to its combined effects on the carbon surface and on the solute molecules. Adsorption of p-nitrophenol at higher pH was found to be dependent on the concentration of the anionic form of the solute.     

Spectrophotometric Determination of the Ionization Constants of Aqueous Nitrophenols at Temperatures up to 225 °C

The UV-visible spectra of aqueous o-, m-, and p-nitrophenol were measured as a function of pH at temperatures from 50 to 225 °C at a pressure of 7 MPa. These were used to determine equilibrium constants for the acid ionization reaction of each isomer. The new results were combined with literature data on the ionization of nitrophenols and used for parameter optimization in the thermodynamic model of Marshall and Franck (J. Phys. Chem. Ref. Data 10:295–304, [1981]), to describe the dependence of ionization properties on temperature and pressure. The model yields predictions of the ionization constants for o-, m-, and p-nitrophenol, log ₁₀ K _a, to at least 250 °C and 20 MPa with an estimated uncertainty in log ₁₀ K _a of less than ±0.06.     

Acid-base properties and nucleophilicity of o-aminomethylphenols in aqueous micellar solutions and microemulsions

The pK _a values and constants of tautomeric equilibrium of several o-aminomethylphenols with different hydrophilic-lipophilic ability were measured in aqueous micellar solutions and in direct microemulsions based on cetyltrimethylammonium bromide. The kinetics of hydrolysis of p-nitrophenyl acetate at different pH and concentrations of aminomethylphenol and surfactant was studied. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1724–1729, October, 2006     

What are the pKa values of organophosphorus compounds?

A first-principle theoretical protocol was developed, which could successfully predict the pK_a values of a number of amines and thiols in DMSO with a precision of about 1.1 pK_a unit. Using this protocol we calculated the pK_a values of diverse types of organophosphorus compounds in DMSO. The accuracy of these predicted values was estimated to be about 1.1 pK_a because phosphorus is in the same group as nitrogen and in the same period as sulfur. The theoretical predictions were also consistent with all the available experimental data. Thus, a scale of reliable pK_a values was constructed for the first time for organophosphorus. These pK_a values would be helpful to synthetic chemists who need to design the experimental conditions for handling deprotonated organophosphorus. On the basis of these pK_a values we also studied, for the first time, some interesting topics such as the substituent effects on the pK_a values of various types of organophosphorus, and the differences between the pK_a values of organophosphorus and organic amines.     

Benchmarking and validating algorithms that estimate p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values of drugs based on their molecular structures

The REGDIA regression diagnostics algorithm in S-Plus is introduced in order to examine the accuracy of pK _a predictions made with four updated programs: PALLAS, MARVIN, ACD/pKa and SPARC. This report reviews the current status of computational tools for predicting the pK _a values of organic drug-like compounds. Outlier predicted pK _a values correspond to molecules that are poorly characterized by the pK _a prediction program concerned. The statistical detection of outliers can fail because of masking and swamping effects. The Williams graph was selected to give the most reliable detection of outliers. Six statistical characteristics (F _exp, R ², , MEP, AIC, and s(e) in pK _a units) of the results obtained when four selected pK _a prediction algorithms were applied to three datasets were examined. The highest values of F _exp, R ², , the lowest values of MEP and s(e), and the most negative AIC were found using the ACD/pK _a algorithm for pK _a prediction, so this algorithm achieves the best predictive power and the most accurate results. The proposed accuracy test performed by the REGDIA program can also be applied to test the accuracy of other predicted values, such as log P, log D, aqueous solubility or certain physicochemical properties of drug molecules.     

胶溶-水热晶化过程中纳米TiO2相稳定性研究

The phase stability of nanocrystaline anatase and rutile TiO2 in sols peptized at different temperature has been studied by X-ray Diffraction (XRD) and thermodynamical analysis. The results show that the stability of nanocrystaline TiO2 of different crystal types is a function of particle size. According to the thermodynamical analysis, anatase TiO2 becomes more stable than rutile TiO2 when the particle size is less than ca. 14 nm, which coincides with the experimental data obtained by XRD. Both surface Gibbs free energy and surface stress play important roles in the thermodynamically phase stability. Comparing the data calculated thermodynamically with the experimental results obtained under different temperatures, it is found that the constant K in the function relation, f=KGS, between surface free energy GS and surface stress f is temperature dependent and equal to 1 at 333 K and 2 at 453 K, respectively.     

Photocatalytic activity of N-doped TiO2: photocatalytic synthesis of o-aminophenol at room temperature

The photocatalytic synthesis of o-aminophenol in methanol was investigated with N-doped TiO₂ nanoparticles under UV-light irradiation. The catalytic quantities of N-doped TiO₂ prepared by a simple modified sol–gel process with urea as nitrogen source rapidly reduced o-nitrophenol to the corresponding amine at room temperature.     

Capillary zone electrophoresis of basic drugs in non-aqueous acetonitrile with buffers based on a conventional pH scale

Summary The pK _a ^* values of 10 nitrogen-containing basic drugs in non-aqueous acetonitrile were determined from the pH^* dependence of their electrophoretic mobilities. The pH^* scale in the organic solvent was established using background electrolytes with known conventional pK _a ^* values, making further calibration with reference pH electrodes unnecessary. In acetonitrile the pK _a ^* values of analytes (or their conjugated cation acids, BH⁺, respectively) were 5.2±8.9 pK units>those in water. The observed change in pK _a ^* values of cationic analytes was, however, much less than the known respective change for neutral acids type HA. From the pK _a ^* values and the actual mobilities, it is possible to predict pH^* conditions to enable separation of analytes, and this was demonstrated for two pairs of common drugs.     

Preparation and photocatalytic activity of Sb2S3/Bi2S3 doped TiO2 from complex precursor via gel-hydrothermal treatment

Sb₂S₃/Bi₂S₃ doped TiO₂ were prepared with the coordination compounds [M(S₂CNEt)₃] (M=Sb, Bi; S₂CNEt=pyrrolidinedithiocarbamate) as precursors via gel-hydrothermal techniques. The doped TiO₂ were characterized by XRD, SEM, XPS and UV-vis diffuse reflectance means. The photocatalyst based on doped TiO₂ for photodecolorization of 4-nitrophenol (4-NP) was examined. The optimal Bi₂S₃/Sb₂S₃ content, pH and different doped techniques have been investigated. Photocatalytic tests reveal that M₂S₃ doped TiO₂ via the gel-hydrothermal route performs better photocatalytic activity for photodegradation reaction of 4-nitrophenol (4-NP).     

Parameters controlling the photocatalytic performance of ZnO/Hombikat TiO2 composites

Commercial TiO₂ (Hombikat, UV-100) was impregnated with different loadings of zinc nitrate solution and subsequently calcined at different temperatures in order to obtain a stable homogeneous solid composite of ZnO/TiO₂. The prepared samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM), UV-vis and Raman spectroscopy, inductively coupled plasma mass spectroscopy (ICP), X-ray photoelectron spectroscopy (XPS) as well as N₂ adsorption and desorption measurements. Results show that ZnO was incorporated within the TiO₂ crystals and did not form a separate bulky phase or metallic zinc. Moreover, the calcination temperature dramatically modifies the texture properties of the prepared samples compared with original Hombikat TiO₂. The photocatalytic performance of the prepared samples was evaluated by monitoring the degradation of methyl orange dye under black light illumination. Three main parameters were studied; ZnO loading, surface area and initial pH of the methyl orange solution. The variation in ZnO loading appears to have less influence on the catalytic activity than either the surface area or the pH.     

Calculations of pKa values of carboxylic acids in aqueous solution using density functional theory

With the specific aim of calculating the acidity equilibrium constant (K_a) of carboxylic acids in aqueous solution we investigated the solute-solvent interactions of these acids and their corresponding anions. The pK_a (−lg K_a) values have been calculated using density functional theory (DFT). The polarized continuum model (PCM) is used to describe the solvent. Using these methods, we successfully predicted the pK_as of 66 carboxylic acids in aqueous with the average error of 0.5 in pK_a units. Two different thermodynamic cycles have been studied. The theoretical values are in better agreement with the experimental results for those acids with moderate strength of acidity with the pK_a value higher than 3.     

Thermodynamic cycle for the calculation of ab initio pKa values for hydroxamic acids

A thermodynamic cycle to calculate pK_a values (Minus log of acid dissociation constants) of hydroxamic acids is presented. Hydroxamic acids exist mainly as amide isomers in the aqueous medium. The amide form of hydroxamic acids has two deprotonation sites and may yield either an N-ion or an O-ion upon deprotonation. The thermodynamic cycle proposed includes the gas-phase N–H deprotonation of the hydroxamic acid, the solvent phase transformation of the N-ion to the O-ion and the solvation of the hydroxamic acid molecule and the O-ion in water. The CBS-QB3 method was employed to obtain gas-phase free energy differences between 12 hydroxamic acids and their respective anions. The aqueous solvation Gibbs free energy changes were calculated at the HF/6-31G(d)/CPCM and HF/6-31+G(d)/CPCM levels of theory using HF/6-31+G(d)/CPCM geometries. For the proton, literature values of the gas-phase free energy of formation and the solvation free energy change were used. The free energy change for the transformation of the N-ion to O-ion in the aqueous medium was calculated by employing CBS-QB3/CPCM in the aqueous medium. For this, the hydroxamic acids were divided in two classes according to the substituent at the carbonyl carbon. A common transformation free energy difference for aliphatic substituted hydroxamic acids and a separate common transformation free energy difference for aromatic substituted hydroxamic acids were obtained. The pK_a calculation yielded a root mean square error of 0.32 pK_a units.     

SiO2负载氮掺杂TiO2可见光响应光催化剂的制备及性能

以四氯化钛为钛源,尿素为氮源,采用液相水解-沉淀法制得SiO2负载N掺杂TiO2可见光响应TiO2-xNy/SiO2光催化剂(TSN)。以苯酚为模型物,考察了TSN在可见光区、紫外光区及太阳光下的光催化活性,以及催化剂的使用寿命、分离性能。采用XPS、FTIR、UV-Vis DRS、XRD、TEM和低温氮物理吸附等对催化剂的结构进行表征。结果表明,N以阴离子形式进入TiO2体相并置换晶格中的O,适量N掺杂的TSN在紫外光区、可见光区及太阳光下均表现出较高的活性。SiO2与TiO2界面间有Ti-O-Si键形成,结合牢固。N掺杂在TiO2表面生成Ti-O-N键,形成新的能级结构,使催化剂的吸收红移至450~500 nm,诱发TiO2可见光催化活性。SiO2负载可减小TiO2颗粒平均尺寸,增加催化剂比表面积;同时SiO2负载还可改善催化剂的分离性能,提高催化剂使用寿命。     

Biosensor for direct determination of fenitrothion and EPN using recombinant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> JS444 with surface-expressed organophosphorous hydrolase. 2. Modified carbon paste electrode

A whole cell-based amperometric biosensor for highly selective, sensitive, rapid, and cost-effective determination of the organophosphate pesticides fenitrothion and ethyl p-nitrophenol thiobenzenephosphonate (EPN) is discussed. The biosensor comprised genetically engineered p-nitrophenol (PNP)-degrading bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorous hydrolase (OPH) on its cell surface as biological sensing element and carbon paste electrode as the amperometric transducer. Surface-expressed OPH catalyzed the hydrolysis of organophosphorous pesticides such as fenitrothion and EPN to release PNP and 3-methyl-4-nitrophenol, respectively, which were subsequently degraded by the enzymatic machinery of P. putida JS444 through electrochemically active intermediates to the TCA cycle. The electrooxidization current of the intermediates was measured and correlated to the concentration of organophosphates. Operating at optimum conditions, 0.086 mg dry wt of cell operating at 600 mV of applied potential (vs Ag/AgCl reference) in 50 mM citratephosphate buffer, pH 7.5, with 50 μM CoCl₂ at room temperature, the biosensor measured as low as 1.4 ppb of fenitrothion and 1.6 ppb of EPN. There was no interference from phenolic compounds, carbamate pesticides, triazine herbicides, or organophosphate pesticides without nitrophenyl substituent. The service life of the biosensor and the applicability to lake water were also demonstrated.     

TiO2基固体超强酸的制备及光催化性能研究

半导体氧化物TiO2对很多有机污染物吸附较强、催化氧化活性高,因此它在环境污染治理方面扮演极其重要的角色,被广泛用于光催化处理多种有机物,但常规二氧化钛半导体光催化剂较低的量子效率(约4%)使其应用受到一定程度的制约[1]。1979年H ino[2]等首次报道无卤素型SO42-/M xO y固体超强酸体系以来,引起化学工作者极大关注。固体超强酸催化剂如SO42-/TiO2,SbF5/SiO2/TiO2等是一类新型酸催化剂,广泛用于酯化反应、苯衍生物烷基化、烯烃齐聚等。研究发现,基于SO42-改性的TiO2固体超强酸催化剂对于有机物具有较高的光催化氧化活性[3,4],…     

Estimation of the pK a of the amine groups of benzhydrylamine resin and its lysyl derivative by measurement of swelling

Summary For better evaluation of the potential of benzhydrylamine resin (BHAR), used as a solid support for peptide synthesis, as a novel anion-exchange resin, the pK _a of its amine group was estimated by microscopic measurement of the sizes of the dry and swollen beads. Using the volume of the bead occupied by the solvent (as a percentage) as the swelling parameter, a plot of the degree of swelling of BHAR loaded with 2.4 mmol g^–1 amine groups against the pH of the medium produced a decreasing sigmoidal-type curve with increasing pH. By considering the point of inflection of the curve, a pK _a value of approximately 7.5 was estimated for the amine group of the BHAR. The same approach was also applied to the lysyl derivative of the BHAR (Lys-BHAR) and pK _a values around 6.5 and 10.0 were obtained for the and amine groups, respectively.     

Highly sensitive spectrofluorimetric determination of cysteine by Cu2+-morin complex

p-Toluenesulfonylamide was immobilized on silica gel and on nm-sized silicium dioxide (SiO₂). Their adsorption efficiency toward metal ions was investigated by the batch equilibrium technique. Although silica gel and nm-SiO₂ have the same composition (silicon and oxygen), the difference in their sizes and surface structures results in distinct chemical activity and selectivity. At pH 4, the adsorption capacity of modified silica gel adsorbent was found to be 4.9, 5.0, 33.2, and 12.6 mg g⁻¹ for Cr(III), Cu(II), Pb(II) and Zn(II), respectively. However, the adsorption capacity of nm-SiO₂ adsorbent toward Cr(III) was 26.7 mg g⁻¹ under ultrasonic dispersing. The potential application of p-toluenesulfonylamide-modified silica gel for simultaneous preconcentration of trace chromium, copper, lead and zinc from two standard reference materials and two food samples was performed with satisfactory results. Correspondence: Xijun Chang, Department of Chemistry, Lanzhou University, Lanzhou 730000, P.R. China