Electrocatalytic assay of mercury(II) ions using a bifunctional oligonucleotide signal probe

Engineered nucleic acid probes containing recognition and signaling functions find growing interest in biosensor design. In this paper, we developed a novel electrochemical biosensor for sensitive and selective detecting of Hg²⁺ based on a bifunctional oligonucleotide signal probe combining a mercury-specific sequence and a G-quadruplex (G4) sequence. For constructing the electrochemical Hg²⁺ biosensor, a thiolated, mercury-specific oligonucleotide capture probe was first immobilized on gold electrode surface. In the presence of Hg²⁺, a bifunctional oligonucleotide signal probe was hybridized with the immobilized capture probe through thymine–mercury(II)–thymine interaction-mediated surface hybridization. The further interaction between G4 sequence of the signal probe and hemin generated a G4–hemin complex, which catalyzed the electrochemical reduction of hydrogen peroxide, producing amplified readout signals for Hg²⁺ interaction events. This electrochemical Hg²⁺ biosensor was highly sensitive and selective to Hg²⁺ in the concentration of 1.0 nM to 1 μM with a detection limit of 0.5 nM. The new design of bifunctional oligonucleotide signal probes also provides a potential alternative for developing simple and effective electrochemical biosensors capable of detecting other metal ions specific to natural or artificial bases.     

Oligonucleotides-based biosensors with high sensitivity and selectivity for mercury using electrochemical impedance spectroscopy

A novel electrochemical biosensor with high sensitivity and selectivity for mercuric ion detection, based on DNA self-assembly electrode, is designed. Thiol functionalized poly-T oligonucleotides were used as gold electrode modifier through formation of Au–S bond between DNA and gold electrode. In presence of Hg²⁺ ions, the specific coordination between Hg²⁺ and thymine bases can change parallel ss-DNA from linear to hairpin structures, which can cause the release of partial DNA molecules from the surface of the electrode. The density of DNA on the surface of electrode correlated with the concentration of mercury in the solution and can be monitored by electrochemical impedance spectroscopy. The limit of detection of this method is pM level of mercuric ions which is far below the upper limit of Hg²⁺ mandated by United States Environmental Protection Agency (EPA), 2 ppb (10 nM). In addition, this method showed excellent selectivity. A series of divalent metal ions, including Ni²⁺, Co²⁺, Mg²⁺, Zn²⁺, Ba²⁺ and Cd²⁺, have little interference with the detection of Hg²⁺.     

Mechanism of mercury detection based on interaction of single-strand DNA and hybridized DNA with gold nanoparticles

Mechanisms of interaction of single-strand DNA and hybridized DNA on gold nanoparticles in the presence of Hg²⁺ was studied in this work. Recently the detection of Hg²⁺ using unmodified gold nanoparticles (AuNPs) combined with DNA is becoming a promising technique with the advantages of simplicity, cost-effectiveness and high sensitivity. However, few studies focused on the interaction of ssDNA and hybridized DNA on AuNPs to date. In the present work, we compared the interactions of different DNA probes on AuNPs using both absorption and fluorescence detection. It was found that there were only small partial dsDNA dissociated from the surface of AuNPs after hybridization in the presence of Hg²⁺. Moreover, we found that the aggregated AuNPs/DNA system tended to be dispersed again with increasing Hg²⁺ concentration up to 250 μM. Based on these results, the mechanisms of mercury detection based on interaction between DNA-conjugated gold nanoparticles were investigated. Positively charged dsDNA could bind to the surface of AuNPs and dominate the electrostatic interactions and consequently aggregation of the AuNPs/DNA system.     

A ratiometric electrochemical biosensor for sensitive detection of Hg based on thymine–Hg–thymine structure

In this paper, a simple, selective and reusable electrochemical biosensor for the sensitive detection of mercury ions (Hg²⁺) has been developed based on thymine (T)-rich stem–loop (hairpin) DNA probe and a dual-signaling electrochemical ratiometric strategy. The assay strategy includes both “signal-on” and “signal-off” elements. The thiolated methylene blue (MB)-modified T-rich hairpin DNA capture probe (MB-P) firstly self-assembled on the gold electrode surface via Au–S bond. In the presence of Hg²⁺, the ferrocene (Fc)-labeled T-rich DNA probe (Fc-P) hybridized with MB-P via the Hg²⁺-mediated coordination of T–Hg²⁺–T base pairs. As a result, the hairpin MB-P was opened, the MB tags were away from the gold electrode surface and the Fc tags closed to the gold electrode surface. These conformation changes led to the decrease of the oxidation peak current of MB (I_MB), accompanied with the increase of that of Fc (I_Fc). The logarithmic value of I_Fc/I_MB is linear with the logarithm of Hg²⁺ concentration in the range from 0.5 nM to 5000 nM, and the detection limit of 0.08 nM is much lower than 10 nM (the US Environmental Protection Agency (EPA) limit of Hg²⁺ in drinking water). What is more, the developed DNA-based electrochemical biosensor could be regenerated by adding cysteine and Mg²⁺. This strategy provides a simple and rapid approach for the detection of Hg²⁺, and has promising application in the detection of Hg²⁺ in real environmental samples.     

Polythymine Oligonucleotide‐Modified Gold Electrode for Voltammetric Determination of Mercury(II) in Aqueous Solution

Polythymine oligonucleotide (PTO)‐modified gold electrode (PTO/Au) was developed for selective and sensitive Hg²⁺ detection in aqueous solutions. This modified electrode was prepared by self‐assembly of thiolated polythymine oligonucleotide (5′‐SH‐T₁₅‐3′) on the gold electrode via Au? S bonds, and then the surface was passivated with 1‐mercaptohexanol solution. The proposed electrode utilizes the specific binding interactions between Hg²⁺ and thymine to selectively capture Hg²⁺, thereby reducing the interference from coexistent ions. After exchanging the medium, electrochemical reduction at ?0.2 V for 60 s, voltammetric determination was performed by differential pulse voltammetry using 10 mM HEPES; pH 7.2, 1 M NaClO₄ as supporting electrolyte. This electrode showed increasing voltammetric response in the range of 0.21 nM Hg²⁺, with a relative standard deviation of 5.32% and a practical detection limit of 60 pM. Compared with the conventional stripping approach, the modified electrode exhibits good sensitivity and selectivity, and is expected to be a new type of green electrode.     

Solid-state electrochemiluminescence sensor through the electrodeposition of Ru(bpy)3/AuNPs/chitosan composite film onto electrode

Tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) has been successfully immobilized onto electrode through the electrodeposition of Ru(bpy)₃²⁺/AuNPs/chitosan composite film. In the experiments, chitosan solution was first mixed with Au nanoparticles (AuNPs) and Ru(bpy)₃²⁺. Then, during chronopotentiometry experiments in this mixed solution, a porous 3D network structured film containing Ru(bpy)₃²⁺, AuNPs and chitosan has been electrodeposited onto cathode due to the deposition of chitosan when pH value is over its pK_a (6.3). The applied current density is crucial to the film thickness and the amount of the entrapped Ru(bpy)₃²⁺. Additionally, these doping Ru(bpy)₃²⁺ in the composite film maintained their intrinsic electrochemical and electrochemiluminescence activities. Consequently, this Ru(bpy)₃²⁺/AuNPs/chitosan modified electrode has been used in ECL to detect tripropylamine, and the detection limit was 5 × 10⁻¹⁰ M.     

Ultrasensitive and rapid screening of mercury(II) ions by dual labeling colorimetric method in aqueous samples and applications in mercury-poisoned animal tissues

Rapid and ultrasensitive detection of trace heavy metal mercury(II) ions (Hg²⁺) are of significant importance due to the induced serious risks for environment and human health. This presented article reports the gold nanoparticle-based dual labeling colorimetric method (Dual-COLO) for ultrasensitive and rapid detection of Hg²⁺ using the specific thymine–Hg²⁺–thymine (T–Hg²⁺–T) as recognition system and the dual labeling strategy for signal amplification. Both qualitative and quantitative detections of Hg²⁺ are achieved successfully in aqueous samples. More importantly, the achieved detection limit of 0.005 ng mL⁻¹ (0.025 nM) without any instruments is very competitive to other rapid detection methods even ICP-MS based methods. This Dual-COLO method is also applied directly for real water sample monitoring and, more importantly, applied in analysis of mercury poisoned animal tissues and body fluidic samples, indicating a potentially powerful and promising tool for environmental monitoring and food safety control.     

Target-induced formation of gold amalgamation on DNA-based sensing platform for electrochemical monitoring of mercury ion coupling with cycling signal amplification strategy

Heavy metal ion pollution poses severe risks in human health and environmental pollutant, because of the likelihood of bioaccumulation and toxicity. Driven by the requirement to monitor trace-level mercury ion (Hg²⁺), herein we construct a new DNA-based sensor for sensitive electrochemical monitoring of Hg²⁺ by coupling target-induced formation of gold amalgamation on DNA-based sensing platform with gold amalgamation-catalyzed cycling signal amplification strategy. The sensor was simply prepared by covalent conjugation of aminated poly-T₍₂₅₎ oligonucleotide onto the glassy carbon electrode by typical carbodiimide coupling. Upon introduction of target analyte, Hg²⁺ ion was intercalated into the DNA polyion complex membrane based on T–Hg²⁺–T coordination chemistry. The chelated Hg²⁺ ion could induce the formation of gold amalgamation, which could catalyze the p-nitrophenol with the aid of NaBH₄ and Ru(NH₃)₆³⁺ for cycling signal amplification. Experimental results indicated that the electronic signal of our system increased with the increasing Hg²⁺ level in the sample, and has a detection limit of 0.02 nM with a dynamic range of up to 1000 nM Hg²⁺. The strategy afforded exquisite selectivity for Hg²⁺ against other environmentally related metal ions. In addition, the methodology was evaluated for the analysis of Hg²⁺ in spiked tap-water samples, and the recovery was 87.9–113.8%.     

Sol–Gel Chemistry for Ba2+ Sensors to Allow Oil Production Engineered Nanometrically

Work on the development of a Ba^{2 +}-sensitive sol–gel based optical fiber (OF) for use in oil wells is described. The optical fiber (OF) has on its surface a Ba^{2 +} chelating ligand (L) immobilized at a 2–16 wt% loading immobilized in a porous SiO₂ sol–gel host. The authors report sol–gel routes to these SiO₂ and L/SiO₂ nanocomposites and describe their characterization by XPS, fluorescence, NMR, UV-vis and BET methods. They also report on the sol–gel coating and its selectivity to Ba^{2 +}_(aq).     

Colloid Au-enhanced DNA immobilization for the electrochemical detection of sequence-specific DNA

We use colloidal Au to enhance the DNA immobilization amount on a gold electrode and ultimately lower the detection limit of our electrochemical DNA biosensor. Self-assembly of approximately 16-nm diameter colloidal Au onto a cysteamine modified gold electrode resulted in an easier attachment of an oligonucleotide with a mercaptohexyl group at the 5′-phosphate end, and therefore an increased capacity for nucleic acid detection. Quantitative results showed that the surface densities of oligonucleotides on the Au colloid modified gold electrode were approximately (1–4)×10¹⁴ molecules cm⁻². Hybridization was induced by exposure of the ssDNA-containing gold electrode to ferrocenecarboxaldehyde labeled complementary ssDNA in solution. The detection limit is 5×10⁻¹⁰ mol l⁻¹ of complementary ssDNA, which is much lower than our previous electrochemical DNA biosensors. The Au nanoparticle films on the Au electrode provide a novel means for ssDNA immobilization and sequence-specific DNA detection.     

Thick-film electrodes for measurement of superoxide and hydrogen peroxide based on direct protein–electrode contacts

Cytochrome c was immobilized on screen-printed thick-film gold electrodes by a self-assembly approach using mixed monolayers of mercaptoundecanoic acid and mercaptoundecanol. Cyclic voltammetry revealed quasi-reversible electrochemical behavior of the covalently fixed protein with a formal potential of +10 mV vs. Ag/AgCl. Polarized at +150 mV vs. Ag/AgCl the electrode was found to be sensitive to superoxide radicals in the range 300–1200 nmol L^–1. Compared with metal needle electrodes sensitivity and reproducibility could be improved and combined with the easiness of preparation. This allows the fabrication of disposable sensors for nanomolar superoxide concentrations. By changing the electrode potential the sensor can be switched from response to superoxide radicals to hydrogen peroxide—another reactive oxygen species. H₂O₂ sensitivity can be provided in the range 10–1000 mol L^–1 which makes the electrode suitable for oxidative stress studies.     

In situ surface plasmon study of the electropolymerization of Fe(vbpy)3 onto a gold surface

Sequential multilayer electropolymerization of Fe(vbpy)₃²⁺ (vbpy=4-vinyl-4′-methyl-2,2′-bipyridine) onto a thin gold electrode was followed in situ with surface plasmon spectroscopy (SPS) using a 1 mW HeNe laser at 6328 Å. The robustness of the gold film electrode necessary for electrochemical deposition in 0.10 M tetraethylammonium perchlorate+acetonitrile is imparted by use of a thin film of 3-mercaptopropyl-trimethoxysilane attached to a SF10 slide to which the metal is covalently bonded. As each polymer layer is deposited by cycling a potentiostat from 0.0 to −1.75 and back to 0.0 V, a plasmon spectrum (reflectivity versus prism angle) is obtained. SP analysis of the angular shift of the spectrum, which increases as the polymer layer thickens, yields an estimate of both the thickness and index of refraction of the polymer film. We found that the plasmon spectrum shifts to higher angles as the polymer layer thickens, along with a progressive decrease in the depth of the resonance minimum. Our modeling shows this unusual spectral behavior involving the resonance minimum is consistent with a Fe(vbpy)₃²⁺ chromophore absorption at 6328 Å, along with thickening of the polymer film. This work demonstrates that SPS is a viable in situ technique for obtaining thickness measurements of electrodeposited thin films.     

Electrodeposition of gold nanoparticles on indium/tin oxide electrode for fabrication of a disposable hydrogen peroxide biosensor

A novel disposable third-generation hydrogen peroxide (H₂O₂) biosensor based on horseradish peroxidase (HRP) immobilized on the gold nanoparticles (AuNPs) electrodeposited indium tin oxide (ITO) electrode is investigated. The AuNPs deposited on ITO electrode were characterized by UV-vis, SEM, and electrochemical methods. The AuNPs attached on the ITO electrode surface with quasi-spherical shape and the average size of diameters was about 25 nm with a quite symmetric distribution. The direct electron chemistry of HRP was realized, and the biosensor exhibited excellent performances for the reduction of H₂O₂. The amperometric response to H₂O₂ shows a linear relation in the range from 8.0 μmol L⁻¹ to 3.0 mmol L⁻¹ and a detection limit of 2 μmol L⁻¹ (S/N = 3). The value of HRP immobilized on the electrode surface was found to be 0.4 mmol L⁻¹. The biosensor indicates excellent reproducibility, high selectivity and long-term stability.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

Influence of several factors on potential-modulated DNA cleavage by the Cu(en)2 and Cu(EDTA) complexes

Potential-modulated DNA cleavage in the presence of copper–ethylenediamine (en) and –ethylenediamine tetraacetic acid (EDTA) complexes was investigated at a gold electrode in a thin layer cell. DNA can be efficiently cleaved through production of active oxygen species at −0.50 V (vs. Ag/AgCl/KCl(sat)) by reducing Cu(en)₂²⁺ to Cu(en)₂⁺ or Cu(EDTA)²⁻ to Cu(EDTA)³⁻. The extent of DNA cleavage increased as the working potential was shifted more negative and the electrolysis time was increased in air-saturated solution. When a small flow of O₂ was passed through the solution during electrolysis, the extent of DNA cleavage was dramatically enhanced. In the absence of Cu(en)₂²⁺ or Cu(EDTA)²⁻ complex, slight DNA cleavage was observed at a more negative working potential due to the reduction of oxygen at the electrode. This observation suggests that potential-modulated DNA cleavage was caused mainly by electrochemical reduction of the Cu(en)₂²⁺ or Cu(EDTA)²⁻ complex in the presence of oxygen. The cleaved DNA fragments were separated by high performance liquid chromatography (HPLC). The experimental results proved that this method of potential-modulated DNA cleavage by Cu(en)₂²⁺ and Cu(EDTA)²⁻ complexes is simple, mild and highly efficient.     

A Sensitive Hydrogen Peroxide Sensor Based on Hemoglobin Immobilized on Gold Nanoparticles and 1,6-hexanedithiol Modified Gold Electrode

Hemoglobin (Hb) was successfully immobilized on a gold electrode modified with gold nanoparticles (AuNPs) via a molecule bridge 1,6-hexanedithiol (HDT). The AFM images suggested that the HDT/gold electrode could adsorb more AuNPs. UV-vis spectra indicated that Hb on AuNPs/HDT film retained its near-native secondary structures. The electrochemical behaviors of the sensor were characterized with cyclic voltammetric techniques. The resultant electrode displayed an excellent electrocatalytical response to the reduction of hydrogen peroxide (H₂O₂). The linear relationship existed between the catalytic current and the H₂O₂ concentration ranging from 5.0 × 10^?8 to 1.0 × 10^?6 mol · L^?1. The detection limit (S/N = 3) was 1.0 × 10^?8 mol · L^?1.     

A combined μ-mercury reference electrode/Au counter-electrode system for microelectrochemical applications

Different types of mercury-based μ-reference electrodes (Hg/Hg₂SO₄/Na₂SO₄, Hg/Hg₂(CH₃COO)₂/NaCOOCH₃) have been developed following the concept of agar-based μ-reference electrodes. Mercury was electrochemically deposited onto a gold wire to form an amalgam. The corresponding mercury salt was formed electrochemically at the surface. This electrode can be inserted into a capillary that is filled with the electrolyte of interest. To simplify the handling of this μ-reference electrode, to reduce diffusion and to avoid leakage, the electrolyte was immobilised with agar. A 250-nm-thick gold layer on the outer surface of the capillary of the reference electrode served as counter-electrode. The electrochemical behaviour of reference electrodes and counter-electrodes were proven by micro-polarisation curves, electrochemical impedance spectroscopy, potential transients and cyclic voltammetry.     

Zeptomolar detection of Hg2 + based on label-free electrochemical aptasensor: One step closer to the dream of single atom detection

An ultra-sensitive and highly selective electrochemical label-free aptasensor is proposed for the quantitation of Hg^2 + based on the hybridization/dehybridization of double-stranded DNA (dsDNA) on a gold electrode. Thiol-substituted single-stranded DNA (ssDNA) is self-assembled on the gold electrode surface through the SAu interaction. The hybridization of ssDNA with complementary DNA (cDNA) and the consequences of dehybridization in the presence of mercury ions are followed through differential pulse voltammetry (DPV) responses using a [Fe(CN)₆]^{3 −/4 −} redox probe. The formation of a thymine–Hg^2 +–thymine (T–Hg^2 +–T) complex is the key to producing a highly selective and sensitive aptasensor for Hg^2 + determination. Specifically, the present electrochemical aptasensor is able to quantify Hg^2 + ions in concentrations from 5 zeptomolar (zM) to 55 picomolar (pM) with a limit of detection of 0.6 zM, close to the dream of single atom detection, without requiring a complicated procedure or expensive materials.     

Changes in Pt(111) Two-dimensional Long-range Order Induced by Slow Mercury Adsorption and Alloying

A long-term cyclic voltammetry study of Pt(111) electrode in dilute solutions of mercury sulfate (5 × 10^–8–5 × 10^–7 M Hg₂SO₄ + 0.5 M H₂SO₄) has shown that a slow transformation of Pt(111) surface takes place. This transformation leads to a decrease in the bi-dimensional long-range order of the surface. The interpretation of the process involves the increase in mobility of Pt atoms and surface alloying in the presence of mercury. Similar processes of Pt(111) surface disordering take place in acid solution of copper sulfate with the addition of Hg₂SO₄. The penetration of Hg atoms beneath the Pt(111) topmost layer proceeds when only a fraction of the mercury monolayer is deposited on the electrode surface.