A tandem mass spectrometry study of the gas phase RSC6H5Cr+L (R = H,C6H5; L = arene) and C6H5SSC6H5Cr+ ions

Ion-molecule reactions of chromium containing ions with arylsulfides have been studied in the gas phase and their products have been characterized by tandem mass spectrometry. C₆H₅SH and (C₆H₅)₂S react as typical aromatic compounds and give rise to Cr⁺C₆H₅SR] and RC₆H₅Cr⁺QH₅SR′ [R = H, CH₃, CH(CH₃)₂; R′ = H, C₆H₅] ions. Metastable ion mass spectra of the latter species show that the metal is more strongly bound to diphenylsulfide than to alkylbenzenes. C₆H₅SSC₆H₅ reacts with chromium-containing ions to form only Cr⁺(C₆H₅SSC₆H₅). The decomposition characteristics of this ion and, in particular, the presence of a recovery signal in the neutralization-reionization mass spectrum are in keeping with the formation of a 1,2-dithia[2]cyclophane complex ion, which rearranges into a structurel(s) that contains Cr?S bond(s). No evidence was found for metal atom insertion into S?S, C?S, or S?H bonds.     

Reaction of hydrogen atoms with diethyldisulfide and ethylmethyldisulfide

H atoms react with C₂H₅SSC₂H₅ to give C₂H₅SH as the sole retrievable product with ? = 2.32 at 25°C and 2.84 at 145°C. The primary reaction is postulated to be H + C₂H₅SSC₂H₅ ← C₂H₅SH + C₂H₅S with k₁ = (4.73 ± 0.64) × 10¹³ exp [?(1710 ± 69)/RT] cm³/mol·s relative to the rate constant of the H + C₂H₄ ← C₂H₅ reaction. The high value of the entropy of activation suggests the presence of partial hydrogen bonding in diethyldisulfide which is broken in the transition state. Ethylmethyldisulfide reacts similarly: H + C₂H₅SSCH₃ ← C₂H₅SH + CH₃S or CH₃SH + C₂H₅S. The thiyl radicals propagate a chain of radical exchange reactions forming the symmetrical disulfides with exposure-time-dependent quantum yields. The overall kinetics conform to a 16-step mechanism from which the rate constants of the elementary reactions could be established by computer modeling. Thiyl radicals react considerably more slowly with disulfides than H atoms.     

(Phosphine)gold(I) Complexes of Benzenedithioles. Crystal structures of 1,2-benzenedithiolato-bis[triphenyl-phosphinegold(I)] and bis(triethylphosphine)gold(I) bis(1,2-benzenedithiolato)gold(III)

The reaction of 1,2- and 1,3-benzenedithiol C₆H₄(SH)₂ with chloro(phosphine)gold(I) complexes R₃PAuCl (R = Et, Ph) in the presence of triethylamine in tetrahydrofuran gives stable gold(I) complexes 1,2-C₆H₄(SAuPR₃)₂ [R = Et ( 1 ) and Ph ( 2 )] or 1,3-C₆H₄(SAuPPh₃)₂ ( 3 ), respectively, in high yield. The compounds have been characterized by analytical and NMR spectroscopic data. From the reaction of 1,2-C₆H(SH)₂ with Et₃P? AuCl a by-product [(Et₃P)₂Au]⁺ [Au(1,2? C₆H₄S₂)₂]^? ( 4 ) has also been isolated in low yield. The crystal structures of compounds 2 and 4 have been determined by single crystal X-ray diffraction. The gold(I) atoms in complex 2 are two-coordinate with bond angles S? Au? P of 175.2(1) and 159.5(1)°, Au? S bond distances of 2.304(1) and 2.321(1) å, and a short Au…?Au contact of 3.145(1) Å. The gold(I) atom in the cation of complex 4 is also linearly two-coordinate with a P? Au? P angle of 170.1(1) Å and Au? P distances of 2.296(3) and 2.298(3) Å. The geometry of the anion in 4 shows a square-planar coordination of gold(III) by two chelating 1,2-benzenedithiolate ligands with Au? S distances between 2.299(3) and 2.312(3) Å (for two crystallographically independent, centrosymmetrical anions in the unit cell).     

Amperometric sensor for hydrogen peroxide based on direct electron transfer of spinach ferredoxin on Au electrode

A protein-based electrochemical sensor for hydrogen peroxide (H₂O₂) was developed by an easy and effective film fabrication method where spinach ferredoxin (Fdx) containing [2Fe–2S] metal center was cross linked with 11-mercaptoundecanoic acid (MUA) on a gold (Au) surface. The surface morphology of Fdx molecules on Au electrodes was investigated by atomic force microscopy (AFM). Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to study the electrochemical behavior of adsorbed Fdx on Au. The interfacial properties of the modified electrode were evaluated in the presence of Fe(CN)₆^3?/4? redox couple as a probe. From CV, a pair of well-defined and quasi-reversible redox peaks of Fdx was obtained in 10 mM, pH 7.0 Tris–HCl buffer solution at ?170 and ?120 mV respectively. One electron reduction of the [2Fe-2S]²⁺ cluster occurs at one of the iron atoms to give the reduced [2Fe-2S]⁺. The formal reduction potential of Fdx ca. ?150 mV (vs. Ag/AgCl electrode) at pH 7.0. The electron-transfer rate constant, k_s, for electron transfer between the Au electrode and Fdx was estimated to be 0.12 s^?1. From the electrochemical experiments, it is observed that Fdx/MUA/Au promoted direct electron transfer between Fdx and electrode and it catalyzes the reduction of H₂O₂. The Fdx/MUA/Au electrode displays a linear increase in amperometric current for increasing concentration of H₂O₂.The sensor calibration plot was linear with r² = 0.998 with sensitivity approximately 68.24 μAm M^?1 cm^?2. Further, the effect of nitrite on the developed sensor was examined which does not interfere with the detection of H₂O₂. Finally, the addition of H₂O₂ on MUA/Au electrode was observed which has no effect on amperometric current.     

An Electrochemical Investigation into a Series of Tricyanovinylated Pyrrole Moieties

The electrochemical behavior of three tri‐cyanovinylated pyrrole species namely, 2‐tricyanovinyl‐pyrrole (C₄H₄N? C₅N₃), 2‐tricyanovinyl‐N‐methylpyrrole (C₅H₆N? C₅N₃) and 2‐tricyanovinyl‐N‐phenylpyrrole (C₁₀H₈N? C₅N₃), has been studied. All compounds were found to exhibit both an irreversible oxidation at more positive potentials compared to the unsubstituted monomer species and a reversible reduction redox couple associated with reduction of the co‐ordinated cyano ligands. The latter reductions of the tricyanovinylated compounds to their radical anions at platinum, carbon and gold electrodes in acetonitrile solution have been studied by cyclic voltammetry, using a variety of supporting electrolytes. The half‐wave potentials for each compound were found to be dependent upon the supporting electrolyte but independent of the nature of the electrode surface. This is attributed to ion‐pairing between the anions and the alkali metal cations. The reduction based redox processes of C₁₀H₈N? C₅N₃ and C₅H₆N? C₅N₃ were found to be facile in nature and independent of both the nature of the electrolyte and electrode surface. However, the reduction of C₄H₄N? C₅N₃ was found to be irreversible in nature. Attempts were made to elucidate, by both electrochemical and spectroscopic means, the structure of the products obtained upon oxidation of the tricyanovinylated compounds.     

Polythymine Oligonucleotide‐Modified Gold Electrode for Voltammetric Determination of Mercury(II) in Aqueous Solution

Polythymine oligonucleotide (PTO)‐modified gold electrode (PTO/Au) was developed for selective and sensitive Hg²⁺ detection in aqueous solutions. This modified electrode was prepared by self‐assembly of thiolated polythymine oligonucleotide (5′‐SH‐T₁₅‐3′) on the gold electrode via Au? S bonds, and then the surface was passivated with 1‐mercaptohexanol solution. The proposed electrode utilizes the specific binding interactions between Hg²⁺ and thymine to selectively capture Hg²⁺, thereby reducing the interference from coexistent ions. After exchanging the medium, electrochemical reduction at ?0.2 V for 60 s, voltammetric determination was performed by differential pulse voltammetry using 10 mM HEPES; pH 7.2, 1 M NaClO₄ as supporting electrolyte. This electrode showed increasing voltammetric response in the range of 0.21 nM Hg²⁺, with a relative standard deviation of 5.32% and a practical detection limit of 60 pM. Compared with the conventional stripping approach, the modified electrode exhibits good sensitivity and selectivity, and is expected to be a new type of green electrode.     

Resonance Character of Copper/Silver/Gold Bonding in Small Molecule⋅⋅⋅MX (X=F,Cl, Br,CH3, CF3) Complexes

The resonance character of Cu/Ag/Au bonding is investigated in B???M?X (M=Cu, Ag, Au; X=F, Cl, Br, CH₃, CF₃; B=CO, H₂O, H₂S, C₂H₂, C₂H₄) complexes. The natural bond orbital/natural resonance theory results strongly support the general resonance‐type three‐center/four‐electron (3c/4e) picture of Cu/Ag/Au bonding, B:M?X?B⁺?M:X^?, which mainly arises from hyperconjugation interactions. On the basis of such resonance‐type bonding mechanisms, the ligand effects in the more strongly bound OC???M?X series are analyzed, and distinct competition between CO and the axial ligand X is observed. This competitive bonding picture directly explains why CO in OC???Au?CF₃ can be readily replaced by a number of other ligands. Additionally, conservation of the bond order indicates that the idealized relationship b_B???M+b_MX=1 should be suitably generalized for intermolecular bonding, especially if there is additional partial multiple bonding at one end of the 3c/4e hyperbonded triad.     

A novel electrochemical sensor based on molecularly imprinted polymers for caffeine recognition and detection

A sensitive and selective electrochemical sensor based on molecularly imprinted polymers (MIPs) was developed for caffeine (CAF) recognition and detection. The sensor was constructed through the following steps: multiwalled carbon nanotubes and gold nanoparticles were first modified onto the glassy carbon electrode surface by potentiostatic deposition method successively. Subsequently, o-aminothiophenol (ATP) was assembled on the surface of the above electrode through Au–S bond before electropolymerization. During the assembled and electropolymerization processes, CAF was embedded into the poly(o-aminothiophenol) film through hydrogen bonding interaction between CAF and ATP, forming an MIP electrochemical sensor. The morphologies and properties of the sensor were characterized by scanning electron microscopy, cyclic voltammetry, and differential pulse voltammetry. The recognition and determination of the sensor were observed by measuring the changes of amperometric response of the oxidation-reduction probe, [Fe(CN)₆]^3?/[Fe(CN)₆]^4?, on modified electrode. The results demonstrated that the prepared sensor had excellent selectivity and high sensitivity for CAF, and the linear range was 5.0?×?10^?10?~?1.6?×?10^?7?mol?L^?1 with a detection limit of 9.0?×?10^?11?mol?L^?1 (S/N?=?3). The sensor was also successfully employed to detect CAF in tea samples.     

Tetraphenylphosphonium bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)aurate(III) acetone solvate and ethyltriphenylphosphonium bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)aurate(III)

In the two title complexes, (C₂₄H₂₀P)[Au(C₃S₅)₂]·C₃H₆O, (I), and (C₂₀H₂₀P)[Au(C₃S₅)₂], (II), the Au^III atoms exhibit square‐planar coordinations involving four S atoms from two 2‐thioxo‐1,3‐dithiole‐4,5‐dithiolate (dmit) ligands. The Au—S bond lengths, ranging from 2.3057 (8) to 2.3233 (7) Å in (I) and from 2.3119 (8) to 2.3291 (10) Å in (II), are slightly smaller than the sum of the single‐bond covalent radii. In (I), there are two halves of independent Ph₄P⁺ cations, in which the two P atoms lie on twofold rotation axis sites. The Ph₄P⁺ cations and [Au(C₃S₅)₂]⁻ anions are interspersed as columns in the packing. Layers composed of Ph₄P⁺ and [Au(C₃S₅)₂]⁻ are separated by layers of acetone molecules. In (II), the [Au(C₃S₅)₂]⁻ anions and EtPh₃P⁺ counter‐cations form a layered arrangement, and the [Au(C₃S₅)₂]⁻ anions form discrete pairs with a long intermolecular Au...S interaction for each Au atom in the crystal structure.     

Fabrication of a Sensitive Electrochemical Biosensor for Detection of DNA Hybridization Based on Gold Nanoparticles/CuO Nanospindles Modified Glassy Carbon Electrode

In this work, a sensitive electrochemical DNA biosensor for the detection of sequence‐specific target DNA was reported. Firstly, CuO nanospindles (CuO NS) were immobilized on the surface of a glassy carbon electrode (GCE). Subsequently, gold nanoparticles (Au NPs) were introduced to the surface of CuO NS by the electrochemical deposition mode. Probe DNA with SH (HS‐DNA) at the 5′‐phosphate end was covalently immobilized on the surface of the Au NPs through Au? S bond. Scanning electron microscopy (SEM) was used to elucidate the morphology of the assembled film, and electrochemical impedance spectroscopy technique (EIS) was used to investigate the DNA sensor assembly process. Hybridization detection of DNA was performed with differential pulse voltammetry (DPV) and the methylene blue (MB) was hybridization indicator. Under the optimal conditions, the decline of reduction peak current of MB (ΔI) was linear with the logarithm of the concentration of complementary DNA from 1.0×10^?13 to 1.0×10^?6 mol·L^?1 with a detection limit of 3.5×10^?14 mol·L^?1 (S/N=3). In addition, this DNA biosensor has good selectivity, and even can distinguish single‐mismatched target DNA.     

Cu(II) and Ni(II)‐1,10‐phenanthroline‐ 5,6‐dione‐amino acid ternary complexes exhibiting pH‐sensitive redox properties

Syntheses, and electrochemical properties of two novel complexes, [Cu(phendio)(L ‐Phe)(H₂O)](ClO₄) ·H₂O (1) and [Ni(phendio)(Gly)(H₂O)](ClO₄)·H₂O (2) (where phendio = 1,10‐phenanthroline‐5,6‐dione, L ‐Phe = L ‐phenylalanine, Gly = glycine), are reported. Single‐crystal X‐ray diffraction results of (1) suggest that this complex structure belongs to the orthorhombic crystal system. The electrochemical properties of free phendio and these complexes in phosphate buffer solutions in a pH range between 2 and 9 have been investigated using cyclic voltammetry. The redox potential of these compounds is strongly dependent on the proton concentration in the range of ? 0.3–0.4 V vs SCE (saturated calomel reference electrode). Phendiol reacts by the reduction of the quinone species to the semiquinone anion followed by reduction to the fully reduced dianion. At pH lower than 4 and higher than 4, reduction of phendio proceeds via 2e^?/3H⁺ and 2e^?/2H⁺ processes. For complexes (1) and (2), being modulated by the coordinated amino acid, the reduction of the phendio ligand proceeds via 2e^?/2H⁺ and 2e^?/H⁺ processes, respectively. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and structural characterization of ruthenium(II) and iron(II) complexes containing 1,2-di-(2-thienyl)-ethene derived ligands as chromophores

A new family of three-legged piano stool structured organometallic compounds containing the η⁵-cyclopentadienylruthenium(II)/iron(II) fragments {M(η⁵-C₅H₅) (DPPE)}⁺, {Ru(η⁵-C₅H₅)(PPh₃)₂}⁺ and {Ru(η⁵-C₅H₅)(TMEDA)}⁺ with coordinated thiophene based chromophores, namely 5-(2-thiophen-2-yl-vinyl)-thiophene-2-carbonitrile (L1) and 5-[2-(5-Nitro-thiophen-2-yl)-vinyl]-thiophene-2-carbonitrile (L2) has been synthesized and fully characterized by ¹H, ¹³C, ³¹P NMR, IR and UV-Vis spectroscopies. Also, electrochemical studies were carried out by cyclic voltammetry and all experimental data are interpreted and compared with related compounds under the scope of NLO properties. Compounds [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))][CF₃SO₃] (1′Ru) [Fe(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))] [PF₆] (1Fe) and [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₂S)NO₂)][CF₃SO₃] (4′Ru) were also crystallographically characterized.     

Electrochemical Determination of Aflatoxin B1 (AFB1) Using a Copper-Based Metal-Organic Framework (Cu-MOF) and Gold Nanoparticles (AuNPs) with Exonuclease III (Exo III) Assisted Recycling by Differential Pulse Voltammetry (DPV)

Abstract

A sensitive electrochemical biosensor was designed for determination of aflatoxin B1 (AFB1) using a copper-based metal-organic framework (Cu-MOF), which has strong electrochemical activity and exonuclease III (Exo III)-assisted recycling for dual signal amplification. Hairpin DNA (S1) was immobilized on the electrode. The AFB1 was recognized by aptamer DNA (S2) and complementary DNA (S3) was released. The S3 hybridized with the hairpin S1 to form the Exo III hydrolyzed double-stranded DNA, leaving a partial sequence of hairpin DNA (S1′) on the electrode and releasing S3 for the next cycle of the opening and digestion of hairpin S1. The amplified S1′ then was able to combine with more signal probes. Cu-MOF bond gold nanoparticles (AuNPs) by -NH₂ were immobilized to capture DNA (S4) to obtain Cu-MOF/AuNPs/S4. This signal probe Cu-MOF/AuNPs/S4 was able to hybridize with the electrode and generate an amplified electrochemical signal. Under the optimized conditions, this electrochemical biosensor for AFB1 exhibited a low detection limit of 6.7?×?10^?7?ng/mL at a signal-to-noise equal to 3 and a wide linear range from 10^?6 to 1?ng/mL. The biosensor was also used to analyze AFB1-spiked beer sample with recovery values between 96% and 103%. This method has the potential to become a valuable technology for detecting various toxins by the selection of the appropriate aptamer DNA.     

The first example of a two‐coordinated AuI atom bonded to an FeII atom and an N‐heterocyclic carbene (NHC) ligand

The aurophilicity exhibited by Au^I complexes depends strongly on the nature of the supporting ligands present and the length of the Au–element (Au—E) bond may be used as a measure of the donor–acceptor properties of the coordinated ligands. A binuclear iron–gold complex, [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene‐2κC²]dicarbonyl‐1κ²C‐(1η⁵‐cyclopentadienyl)gold(I)iron(II)(Au—Fe) benzene trisolvate, [AuFe(C₅H₅)(C₂₇H₃₆N₂)(CO)₂]·3C₆H₆, was prepared by reaction of K[CpFe(CO)₂] (Cp is cyclopentadienyl) with (NHC)AuCl [NHC = 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. In addition to the binuclear complex, the asymmetric unit contains three benzene solvent molecules. This is the first example of a two‐coordinated Au atom bonded to an Fe and a C atom of an N‐heterocyclic carbene.     

密度泛函理论研究十二烷硫醇在Au(111)面上的吸附

采用第一性原理方法研究了十二烷硫醇(C₁₂H₂₅SH)分子在Au(111)面上未解离和解离吸附的结构、能量和吸附性质,在此基础上分析判断长链硫醇分子在Au(111)面吸附时S―H键的解离, 以及分子链长度对吸附结构和能量的影响. 计算了S原子在不同位置以不同方式吸附的系列构型, 结果表明在S―H键解离前和解离后,均存在两种可能的表面结构, 直立吸附构型和平铺吸附构型; 未解离的C₁₂H₂₅SH分子倾向于吸附在top位, 吸附能为0.35-0.38 eV; H原子解离后C₁₂H₂₅S基团倾向于吸附在bri-fcc位, 吸附能量为2.01-2.09 eV. 比较分析未解离吸附和解离吸附, 发现C₁₂H₂₅SH分子未解离吸附相较于解离吸附要稳定, 未解离吸附属于弱化学吸附.局域电子态密度和差分电荷密度分析进一步验证了S―H解离后S原子与表面之间成键的数目增加, 而且键合更强. 同时我们发现长链硫醇的吸附能量较短链硫醇的吸附能量略大, S原子与表面Au原子之间的距离略小.     

Electrochemical Condensation of Methylviologen on Specifically‐adsorbed Anion Layers

The adsorption of methylviologen dications (MV²⁺) on single‐crystalline Au electrodes in both H₂SO₄ and HClO₄ was examined. MV²⁺ strongly interacted with sulfate and bisulfate anions adsorbed on the Au(111) electrode surface in 0.05 M H₂SO₄ under a controlled potential of 1.25 V vs. the reversible hydrogen electrode (RHE). A characteristic non‐Faradaic current was observed at 1.10 V vs. RHE. When adsorption of MV²⁺ was carried out in 0.1 M HClO₄, the electrochemical response of MV²⁺ was less than that obtained in H₂SO₄. The results show that the formation of a highly ordered sulfate/bisulfate adlayer plays an important role in the formation of condensed MV²⁺ layers. Examination of polycrystalline Au and Au(100) electrodes revealed a poor electrochemical response due to the surface roughness of the Au substrate, but the electrochemical detection was applicable to polycrystalline Au electrodes. A systematic investigation of the structural dependency of viologen derivatives showed that molecular size is important for electrostatic interactions with a highly ordered sulfate/bisulfate adlayer. The findings of the present study demonstrate successful detection of MV²⁺ at a concentration of ≤1 pM with a non‐Faradaic current.     

Electrocatalytic Conversion of Products of Chemisorption of Simple Iodoaromatic Molecules on Smooth Platinum

The electrochemical behavior of chemisorption products of iodoaromatic compounds (C₆H₅I, C₆H₅IO) and iodide anions on a platinum electrode is studied. An assumption is made of a possible cleavage of the C–I bond upon C₆H₅IO adsorption and the formation of a product with properties similar to those of adsorbed iodine atoms.     

Synthesis and pH-sensitive redox properties of 1,10-phenanthroline-5,6-dione complexes

Synthesis and pH-sensitive electrochemical properties of three complexes, [Cu(PD)₃] · (ClO₄)₂ · 2.25CH₃CN · 6H₂O (1), [Cu(PD)(DMSO)Cl₂] · DMSO · H₂O (2) and [Co(PD)₃] · (ClO₄)₂ · CH₃CN · 2H₂O (3) (PD=1,10-phenanthroline-5,6-dione), are reported. Single-crystal X-ray diffraction of the complexes suggest that the structure of 1 is orthorhombic, 2 triclinic and 3 orthorhombic. The electrochemical properties of free PD and the three complexes in phosphate buffer solutions in a pH range between 2 and 9 have been investigated using cyclic voltammetry. The redox potentials of these compounds are strongly dependent on the proton concentration in the range ?0.3 V ～ 0.4 V versus SCE (saturated calomel reference electrode). The reduction behavior of PD can be described from quinone species to semiquinone anion then to the fully reduced dianion. At pH < 4, the reduction of PD proceeds via 2e^?/3H⁺ processes, while at pH > 4, the reduction of PD proceeds via 2e^?/2H⁺. For all complexes, the N–N chelate PD ligand is electrochemically active and underwent step reduction via 2e^?/2H⁺.     

Ferrocenyl-nitrogen donor ligands. Synthesis and characterization of rhodium(I) complexes of ferrocenylpyridine and related ligands

The preparation of a series of complexes of the types [RhCl(CO)₂(L)], [RhCl(cod)(L)] and [Rh(cod)(L)₂]ClO₄, where L is a ligand incorporating a ferrocenyl group and a pyridine ring is described. Complexes were characterized using NMR, IR and electronic spectroscopy. The electrochemical behaviour of the complexes was examined using cyclic voltammetry. The X-ray structures of three of the complexes, [RhCl(CO)₂{NC₅H₄CNC₆H₄(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}], [RhCl(cod)(3-Fcpy)] and [RhCl(cod){3-Fc(C₆H₄)py}], were determined.     

FeS2−AuNPs Nanocomposite as Mimicking Enzyme for Constructing Signal‐off Sandwich‐type Electrochemical Immunosensor Based on Electroactive Nickel Hexacyanoferrate as Matrix

In this work, a novel sandwich‐type electrochemical immunosensor with electroactive nickel hexacyanoferrate nanoparticles (NiHCFNPs) as matrix was constructed for α‐fetoprotein (AFP) detection in a signal‐off manner by using FeS₂?AuNPs nanocomposite catalyzed insoluble precipitation to significantly inhibit the electrochemical signal. Initially, the NiHCFNPs with excellent electrochemical property was modified on the electrodeposited nano‐Au electrode to obtain a strong initial electrochemical signal. Subsequently, another nano‐Au layer was formed for immobilization of capture antibody (Ab₁). In the presence of target AFP, the prepared FeS₂?AuNPs‐Ab₂ bioconjugate could be specifically recognized and immobilized on electrode through the sandwich‐type immunoreaction. The FeS₂ with large specific surface areas were used as scaffolds to load abundant mimicking enzyme AuNPs. With the help of hydrogen peroxide (H₂O₂), FeS₂?AuNPs with peroxidase‐like activity accelerated the 4‐chloro‐1‐naphthol (4‐CN) oxidation with generation of insoluble precipitation on electrode, which would greatly hinder the electron transfer and thus caused the decrease of electrochemical signal for quantitative determination of AFP. This approach achieved a wide dynamic linear range from 0.0001 to 100 ng mL^?1 with an ultralow limit detection of 0.028 pg mL^?1. Especially, the proposed AFP immunosensor can be applied to detect human serum samples with satisfactory results, indicating a potential application in clinical monitoring of tumor biomarkers.