含氟聚合物修饰碳纳米管及其聚氨酯复合疏水膜的研究

利用羟基碳纳米管上的羟基与2-溴异丁基酰溴之间的简单反应, 在碳纳米管上引入了含溴ATRP引发剂, 并进一步引发含氟丙烯酸酯的ATRP聚合, 从而在碳纳米管表面接枝上了低表面能的含氟聚合物. 红外光谱(FT-IR)、热重分析(TGA)和透射电镜(TEM)的研究结果表明碳纳米管与含氟聚合物之间为化学键连接. 以此低表面能聚合物包裹的碳纳米管作为填充粒子, 采用溶液浇铸方法制备了聚氨酯/碳纳米管复合膜, 并利用溶剂四氢呋喃(THF)刻蚀表面获得了不同碳纳米管裸露程度的复合膜材料. 静态接触角测试结果表明, 无论是羟基碳纳米管还是低表面能修饰的碳纳米管均可提高其复合膜的疏水性能, 且其疏水性能随碳纳米管含量的增加而增加; 相同含量时, 含氟聚合物接枝后的碳纳米管使复合膜具有更佳的疏水性能, 膜表面经溶剂刻蚀后可显著提高其疏水性能. 采用扫描电子显微镜(SEM)研究了加入碳纳米管和溶剂刻蚀对聚合物表面微观结构以及材料表面疏水性能的影响. 上述结果表明: 利用接枝聚合物可改变碳纳米管本身的疏水性能, 并可进一步制备新型的具有表面疏水性能的聚合物纳米复合材料.     

基于聚亚甲基的三嵌段聚合物:合成及其多孔薄膜的制备

利用叶立德活性聚合与原子转移自由基聚合(ATRP)相结合的方法制备得到基于聚亚甲基的两、三嵌段聚合物.首先由叶立德活性聚合及氧化反应得到末端羟基的聚亚甲基(PM-OH),再与2-溴异丁酰溴反应得到含溴末端的大分子引发剂(PM-Br),之后引发丙烯酸叔丁酯的ATRP聚合得到聚亚甲基-b-聚丙烯酸叔丁酯(PM-b-P-t-...     

超支化聚对氯甲基苯乙烯修饰碳纳米管表面的研究

用原子转移自由基聚合(ATRP)与自缩合乙烯基聚合(SCVP)相结合合成超支化聚合物聚对氯甲基苯乙烯(PCMS),该聚合物每个分枝均以卤素原子封端. 用叠氮化反应将卤素原子转换为—N3. 通过—N3与单壁或复壁碳纳米管反应将超支化聚合物接到碳纳米管的表面上, 实现了碳纳米管的化学修饰. 通过FTIR, XPS, TEM和Raman光谱等证明PCMS是以共价键形式结合到碳纳米管表面上的. 利用TGA估算出碳纳米管表面的修饰密度, 证明用超支化结构大量的端基可反应的官能团可以改善聚合物对碳纳米管的修饰效果.     

靶向性多肽修饰荧光功能化碳纳米管的制备及靶向肿瘤细胞的初步研究

以羟基化多壁碳纳米管(MWNT-OH)为引发剂,通过原位负离子开环聚合制备了生物相容性多羟基超支化聚缩水甘油接枝的碳纳米管(MWNT-HPG),利用酯化反应将荧光分子罗丹明6B标记于聚合物上,然后聚合物上的羟基和丁二酸酐反应将其转化为羧基.用TGA、FTIR、TEM、SEM等手段对产物进行了表征.用靶向表皮生长因子受体(EGFR)的小分子多肽D4修饰了所得的荧光功能化碳纳米管,并将其做为受体介导靶向肿瘤细胞的纳米载体,通过噻唑蓝(MTT)比色法评价功能化碳纳米管作为载体的安全性.用荧光显微镜观察其与人肺腺癌细胞SPCAI细胞的结合状态.结果证明了其有希望成为受体介导靶向肿瘤系统的纳米载体.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——三层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型具有梯度极性的多羟基多臂星状聚合物刷 .端羟基超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 )与 2 溴 异丁基酰溴反应制得大分子引发剂 (HP Br) ,以Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)为催化体系 ,进行甲基丙烯酸甲酯 (MMA)的ATRP反应 ,得到以甲基丙烯酸甲酯为臂的多臂星状超支化聚合物 (HP g PMMA) .又以HP g PMMA为引发剂 ,进行甲基丙烯酸羟乙酯 (HEMA)的ATRP聚合 ,得到核壳型具有梯度极性的多羟基多臂星状超支化聚合物 (HP g PMMA b PHEMA) ,继续将其羟基官能团溴代化 (与 2 溴 异丁基酰溴反应 ) ,引发HEMA的ATRP溶液聚合 ,得到了多臂星状超支化聚合物刷 .产物的结构用1 H NMR、FTIR、GPC等进行了表征和测试 .     

活性正离子聚合与原子转移自由基聚合转换合成聚β-蒎烯接枝共聚物

通过活性正离子聚合与原子转移自由基聚合(ATRP)转换合成了β-蒎烯与甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、苯乙烯(St)的新型接枝共聚物.首先以α-氯代乙苯/TiCl4/Ti(OiPr)4/nBu4NCl体系引发β-蒎烯活性正离子聚合,合成预定分子量大小和窄分子量分布的聚β-蒎烯,然后经N-溴代琥珀酰亚胺(NBS)定量溴化,得到溴化聚β-蒎烯大分子引发剂(Br/β-蒎烯链节摩尔比为0.5).然后将该大分子引发剂与溴化亚铜(CuBr)/2,2′-联吡啶(bpy)复合,引发MMA、BA、St进行ATRP接枝聚合.接枝反应显示一级动力学特征,且产物的分子量及分子量分布可控,表明上述ATRP接枝聚合反应具有可控聚合特征.接枝产物的结构经1H-NMR分析得到进一步证实.     

α-环糊精修饰型香豆素的设计合成

以环氧氯丙烷为桥接,利用水溶性α-环糊精(α-CD)进行7-羟基-4-甲基香豆素的功能化修饰,得到新型α-环糊精修饰型香豆素衍生物(α-CD-C).用傅里叶变换红外(FT-IR)光谱、氢核磁共振(1H NMR)、液质联用(LC-MS)等对该香豆素衍生物进行了结构表征.紫外光二聚实验表明,该α-环糊精修饰型香豆素可在365 nm光照下进行光二聚反应,且可在随后的254 nm光照下进行解二聚反应;同时通过比较该交替光照下的光二聚反应程度,可知该光二聚反应仅是部分可逆的.     

基于原子转移自由基聚合技术的偶氮苯星形液晶聚合物的合成与表征

利用原子转移自由基聚合(ATRP)技术合成了含不同端基取代基的偶氮苯三臂星形侧链液晶聚合物. 均苯三酚与2-溴异丁酰溴通过酯化反应制备三官能团引发剂, 引发偶氮苯单体6-[4-(4-甲氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(MMAzo)或6-[4-(4-乙氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(EMAzo)的ATRP反应. 利用核磁共振氢谱(¹H NMR)、凝胶色谱(GPC)、差示扫描量热法(DSC)和偏光显微镜(POM)等手段对星形聚合物进行表征. 星形聚合物的液晶性与相应均聚物相似, 但偶氮苯端基取代基的不同导致星形聚合物的液晶性差别显著. 在紫外/可见光照射下星形聚合物呈现明显的异构化转变.     

碳纳米管的聚合物功能化与结构控制:聚合物接枝碳纳米管

碳纳米管高分子化是发展高性能的聚合物基纳米功能材料的重要研究方向,本文从"grafting-to"和"grafting-from"两种方式对聚合物接枝碳纳米管的最新进展进行了系统综述。"Grafting-to"方法主要包括羧基衍生反应(酰化、酯化)、加成反应(大分子自由基加成、叠氮环加成)和硫醇偶联反应。"Grafting-from"方法包括普通自由基聚合、可控/活性自由基聚合、离子聚合、开环聚合和逐步聚合反应,其中碳纳米管表面引发活性自由基聚合进一步分为原子转移自由基聚合、氮氧稳定自由基聚合和可逆加成-断链转移聚合。此外,本文还简述了碳纳米管自身的聚合反应,并探讨了目前聚合物修饰碳纳米管所面临的问题和今后的发展方向。     

纳米SiO_2锚固光敏基团引发MMA光接枝聚合研究

对纳米SiO2进行了锚固光引发剂的表面修饰,进而引发甲基丙烯酸甲脂(MMA)光接枝聚合制备有机/无机复合粒子.纳米SiO2粒子首先用氯化亚砜进行表面氯化,再与光引发剂2-羟基-4-(2-羟基乙氧基)-2-甲基苯丙酮(Irgacure2959)反应从而锚固上光引发剂.通过紫外光引发MMA在经过修饰过的纳米SiO2表面上进行表面光接枝聚合.采用IR、TGA和TEM等方法表征了接枝前后纳米粒子的变化,证明了表面接枝物的存在,并研究了不同反应条件对单体转化率、接枝率和接枝效率的影响.研究结果表明,搅拌对接枝过程的影响比较显著.TGA结果显示未搅拌聚合时接枝率只能达到比较小的程度,而在搅拌条件下180min内MMA的接枝率可达到110%.     

Controlled functionalization of multiwalled carbon nanotubes by in situ atom transfer radical polymerization

The in situ ATRP (atom transfer radical polymerization) "grafting from" approach was successfully applied to graft poly(methyl methacrylate) (PMMA) onto the convex surfaces of multiwalled carbon nanotubes (MWNT). The thickness of the coated polymer layers can be conveniently controlled by the feed ratio of MMA to preliminarily functionalized MWNT (MWNT-Br). The resulting MWNT-based polymer brushes were characterized and confirmed with FTIR, 1H NMR, SEM, TEM, and TGA. Moreover, the approach has been extended to the copolymerization system, affording novel hybrid core-shell nanoobjects with MWNT as the core and amphiphilic poly(methyl methacrylate)-block-poly(hydroxyethyl methacrylate) (PMMA-b-PHEMA) as the shell. The approach presented here may open an avenue for exploring and preparing novel carbon nanotubes-based nanomaterials and molecular devices with tailor-made structure, architecture, and properties.     

Surface modification of multiwalled carbon nanotubes via nitroxide‐mediated radical polymerization

The nitroxide‐mediated radical polymerization of styrene was carried out on the surfaces of multiwalled carbon nanotubes (MWNTs) initiated by an MWNT‐supported initiator multiwalled carbon nanotube–2″,2″,6″,6″‐tetramethylpiperidinyloxy (MWNT–Tempo). The content of polystyrene grafted from the surface was controlled by changes in the polymerization conditions, such as the reaction times or the ratios of monomers to initiators. The obtained polystyrene‐grafted multiwalled carbon nanotubes (MWNT–PSs) were further used to initiate the polymerization of 4‐vinylpyridine to get polystyrene‐b‐poly(4‐vinylpyridine)‐grafted multiwalled carbon nanotubes (MWNT–PS‐b‐P4VPs). In contrast to unmodified MWNTs, MWNT–PSs had relatively good dispersibility in various organic solvents, such as tetrahydrofuran, CHCL₃, and o‐dichlorobenzene. The structures and properties of MWNT–PSs and MWNT–PS‐b‐P4VPs were characterized and studied with several methods, including thermogravimetric analysis, Fourier transform infrared, ultraviolet–visible, and transmission electron microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4656–4667, 2006     

聚氨酯接枝多壁碳纳米管的制备及表征

采用两步法成功地将聚氨酯分子链以共价键连接到碳纳米管表面. 首先将聚丙烯酰氯通过与强酸氧化后多壁碳纳米管表面产生的羟基及少量羧基之间的化学反应共价接枝到碳纳米管表面; 然后将接枝到碳纳米管表面的聚丙烯酰氯与端羟基聚氨酯发生酯化反应, 实现了聚氨酯对碳纳米管的表面共价接枝. 采用傅里叶变换红外光谱(FTIR)、透射电镜(TEM)、扫描电镜(SEM) 和热重分析(TGA)等对接枝后的产物进行了表征, 结果表明, 聚氨酯已共价接枝到碳纳米管表面, 被接枝的聚合物的含量接近90%.     

聚乙二醇单甲醚修饰多壁碳纳米管的研究

多壁碳纳米管(MWNT)经过酸化、酰氯化后与聚乙二醇单甲醚进行接枝反应,实现了碳纳米管的表面修饰。经修饰的MWNT在水中的分散性大大增加。通过FTIR、XPS、Raman、TEM、TGA等手段表征了接枝后产物的化学结构,证明聚乙二醇单甲醚是以共价键的形式接入MWNT表面上的。并利用TGA结果估算出聚乙二醇单甲醚在MWNT表面的接枝密度约为平均每256个碳原子上有一根聚合物链。     

Preparation of polymer‐grafted carbon black nanoparticles by surface‐initiated atom transfer radical polymerization

Pristine carbon black was oxidized with nitric acid to produce carboxyl group, and then the carboxyl group was consecutively treated with thionyl chloride and glycol to introduce hydroxyl group. The hydroxyl group on the carbon black surface was reacted with 2‐bromo‐2‐methylpropionyl bromide to anchor atom transfer radical polymerization (ATRP) initiator. The ATRP initiator on carbon black surface was verified by TGA, FTIR, EDS, and elemental analysis. Then, poly (methyl methacrylate) and polystyrene chains were respectively, grown from carbon black surface by surface‐initiated atom transfer radical polymerization (SI‐ATRP) using CuCl/2,2‐dipyridyl (bpy) as the catalyst/ligand combination at 110 °C in anisole. ¹H NMR, TGA, TEM, AFM, DSC, and DLS were used to systemically characterize the polymer‐grafted carbon black nanoparticles. Dispersion experiments showed that the grafted carbon black nanoparticles had good solubilities in organic solvents such as THF, chloroform, dichloromethane, DMF, etc. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3451–3459, 2007     

聚丙烯酸功能化多壁碳纳米管

Covalent functionalization of multiwalled carbon nanotubes （MWNT） with poly（acrylic acid） has been successfully achieved via grafting of poly（acryloyl chloride） on nanotube surface by esterification reaction of acyl chloride-bound polymer with hydroxyl functional groups present on acid-oxidized MWNT and hydrolysis of polymer attached to nanotubes. Polymer-functionalized MWNT could possess remarkably high solubility in water, and their aqueous solution was very stable without any observable black deposit for a long time. Characterizations of such functionalized MWNT samples using Fourier transform infrared spectrometer, transmission electron microscopy and nuclear magnetic resonance techniques indicated that poly（acrylic acid） was covalently attached to the surface of MWNT.     

聚苯乙烯修饰碳纳米管表面的研究

利用原子转移自由基聚合方法合成了端基具有一个卤素的聚苯乙烯, 并通过叠氮化反应得到端基为叠氮基团的聚苯乙烯. 利用叠氮基与单壁或复壁碳纳米管的反应， 将聚苯乙烯接到碳纳米管的表面上, 实现了碳纳米管的化学修饰. 通过FTIR, XPS, TEM, UV和Raman光谱等技术证明了聚苯乙烯以共价键形式结合到碳纳米管表面上. 利用TGA估算出连接在碳纳米管上的聚苯乙烯的含量, 并推测出复壁碳纳米管中较多的结构缺陷更有利于聚合物的接枝.     

Controlled functionalization of multiwalled carbon nanotubes with various molecular-weight poly(L-lactic acid)

Multiwalled carbon nanotubes (MWNT) were functionalized with poly(L-lactic acid) (PLLA) with different molecular weights using a "grafting to" technique. The oxidized MWNT (MWNT-COOH) were converted to the acyl-chloride-functionalized MWNT (MWNT-COCl) by treating them with thionyl chloride (SOCl2) and reacting them with PLLA to prepare the MWNT-g-PLLA. FTIR and Raman spectroscopy revealed that the PLLA was covalently attached to the MWNT, and the weight gain due to the functionalization was determined by thermogravimetric analyses (TGA). The Raman signals of the MWNT were greatly weakened as a result of the PLLA grafting. The morphology of the grafted PLLA was examined by using SEM and TEM. The amount of grafted PLLA depended on the molecular weight of the PLLA. The PLLA coated on the MWNT became thicker and more uniform with increasing PLLA molecular weight from 1000 to 3000. However, the amount of grafted PLLA became lower when the molecular weight of PLLA was further increased to 11,000 and 15,000, and the PLLA attached to the MWNT showed a squid leglike morphology forming blobs and leaving much of the MWNT surface bare.