Influence of temperature on the structure of liquid water

Molecular dynamics simulations have been carried out for liquid water at 7 different temperatures to understand the nature of hydrogen bonding at molecular level through the investigation of the effects of temperature on the geometry of water molecules. The changes in bond length and bond angle of water molecules from gaseous state to liquid state have been observed, and the change in the bond angle of water molecules in liquid against temperature has been revealed, which has not been seen in literature so far. The analysis of the radial distribution functions and the coordinate numbers shows that, on an average, each water molecule in liquid acts as both receptor and donor, and forms at least two hydrogen bonds with its neigbors. The analysis of the results also indicates that the water molecules form clusters in liquid.     

Modeling of liquid–liquid equilibrium of polyethylene glycol-salt aqueous two-phase systems—the effect of partial dissociation of the salt

The modified NRTL model proposed in the previous paper [Y.-T., Wu, D.-Q. Lin, Z.-Q. Zhu, L.-H. Mei, Fluid Phase Equilibria 124 (1996) 67–79.] is further extended to include the effect of partial dissociation of salts in polyethylene glycol (PEG)–salt aqueous two-phase systems (ATPS), and is used to calculate the liquid–liquid equilibrium phase diagrams such as PEG–(NH₄)₂SO₄ and PEG–MgSO₄ ATPS. The phase diagrams of PEG–uni-bivalent salt ATPS can be correctly represented in the cases of both complete dissociation and partial dissociation of the salt, while those of PEG–MgSO₄ ATPS can only be described in the case of partial dissociation of the salt. The analysis shows that the salts may have different existing states in the ATPS. The effect of partial dissociation of the salts on the phase diagrams should be considered, especially for systems such as PEG–MgSO₄ ATPS.     

Cyclic voltammetry of the transfer of anionic surfactant across the liquid–liquid interface manifests electrochemical instability

Experimental evidence for the presence of the instability window in the polarized potential range of the phase-boundary potential has been obtained in cyclic voltammograms in the presence of the transfer of anionic surfactants across the 1,2-dichloroethane–water interface. Irregular current spikes and fluctuations appeared in the vicinity of the half-wave potential for the transfer of decyl sulfonate and dodecyl sulfate ions. Chaotic current became more pronounced with increasing the concentration of the ionic surfactant. This trend was in excellent agreement with the theoretical prediction based on the recently proposed concept of the electrochemical instability.     

Ionic liquid based dispersive liquid–liquid microextraction for the extraction of pesticides from bananas

This paper describes a dispersive liquid–liquid microextraction (DLLME) procedure using room temperature ionic liquids (RTILs) coupled to high-performance liquid chromatography with diode array detection capable of quantifying trace amounts of eight pesticides (i.e. thiophanate-methyl, carbofuran, carbaryl, tebuconazole, iprodione, oxyfluorfen, hexythiazox and fenazaquin) in bananas. Fruit samples were first homogenized and extracted (1 g) with acetonitrile and after suitable evaporation and reconstitution of the extract in 10 mL of water, a DLLME procedure using 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) as extraction solvent was used. Experimental conditions affecting the DLLME procedure (sample pH, sodium chloride percentage, ionic liquid amount and volume of disperser solvent) were optimized by means of an experimental design. In order to determine the presence of a matrix effect, calibration curves for standards and fortified banana extracts (matrix matched calibration) were studied. Mean recovery values of the extraction of the pesticides from banana samples were in the range of 69–97% (except for thiophanate-methyl and carbofuran, which were 53–63%) with a relative standard deviation lower than 8.7% in all cases. Limits of detection achieved (0.320–4.66 μg/kg) were below the harmonized maximum residue limits established by the European Union (EU). The proposed method, was also applied to the analysis of this group of pesticides in nine banana samples taken from the local markets of the Canary Islands (Spain). To the best of our knowledge, this is the first application of RTILs as extraction solvents for DLLME of pesticides from samples different than water.     

Restudy of the unusual phase behavior of the mesogen-jacketed liquid crystal polymers

1 Introduction Liquid crystals (LC) are a state of order between crystals and liquids. They have imperfect long range orders of orientation and position. Thus, they can be fluid like a liquid and they can have anisotropic prop-erties like crystals. For th…     

Alkylsulfate-based ionic liquids in the liquid–liquid extraction of aromatic hydrocarbons

The (liquid + liquid) equilibrium data (LLE) for the extraction of toluene from heptane with different ionic liquids (ILs) based on the alkylsulfate anion (R-SO₄) was determined at T = 313.2 K and atmospheric pressure. The effect of more complex R-SO₄ anions on capacity of extraction and selectivity in the liquid–liquid extraction of toluene from heptane was studied. The ternary systems were formed by {heptane + toluene + 1,3-dimethylimidazolium methylsulfate ([mmim][CH₃SO₄]), 1-ethyl-3-methylimidazolium hydrogensulfate ([emim][HSO₄]), 1-ethyl-3-methylimidazolium methylsulfate ([emim][CH₃SO₄]), or 1-ethyl-3-methylimidazolium ethylsulfate ([emim][C₂H₅SO₄])}. The degree of quality of the experimental LLE data was ascertained by applying the Othmer–Tobias correlation. The phase diagrams for the ternary systems were plotted, and the tie lines correlated with the NRTL model compare satisfactorily with the experimental data.     

Measuring the optical chirality of molecular aggregates at liquid–liquid interfaces

Some new experimental methods for measuring the optical chirality of molecular aggregates formed at liquid–liquid interfaces have been reviewed. Chirality measurements of interfacial aggregates are highly important not only in analytical spectroscopy but also in biochemistry and surface nanochemistry. Among these methods, a centrifugal liquid membrane method was shown to be a highly versatile method for measuring the optical chirality of the liquid–liquid interface when used in combination with a commercially available circular dichroism (CD) spectropolarimeter, provided that the interfacial aggregate exhibited a large molar absorptivity. Therefore, porphyrin and phthalocyanine were used as chromophoric probes of the chirality of itself or guest molecules at the interface. A microscopic CD method was also demonstrated for the measurement of a small region of a film or a sheet sample. In addition, second-harmonic generation and Raman scattering methods were reviewed as promising methods for detecting interfacial optical molecules and measuring bond distortions of chiral molecules, respectively.     

The influence of the temperature on the liquid–liquid equlibria of the mixture limonene + ethanol + H2O

In this work, experimental liquid–liquid equilibria (LLE) of the limonene + ethanol + water system are presented. The LLE of this system has been measured at 293.15, 303.15, 313.15 and 323.15 K. The equilibrium data presented are correlated using NRTL and UNIQUAC equations. Finally, the reliability of these models is tested by comparison with experimental results.     

The influence of the temperature on the liquid–liquid equilibrium of the ternary system 1-pentanol–ethanol–water

Liquid–liquid equilibrium data for the ternary system 1-pentanol–ethanol–water have been determined experimentally at 25, 50, 85 and 95°C. These results have been correlated simultaneously by the uniquac method obtaining two sets of interaction parameters: one of them independent of the temperature and the other with a linear dependence. Both sets of parameters fit the experimental results well.     

Molecular simulation of the phase behaviour of ternary fluid mixtures: the effect of a third component on vapour–liquid and liquid–liquid coexistence

The Gibbs ensemble algorithm is implemented to determine the vapour–liquid and liquid–liquid phase coexistence of dilute ternary fluid mixtures interacting via a Lennard–Jones potential. Calculations are reported for mixtures with a third component characterised by different intermolecular potential energy parameters. Comparison with binary mixture data indicates that the choice of energy parameter for the third component affects the composition range of vapour–liquid substantially. The addition of a third component lowers the energy of liquid phase while slightly increasing the energy of the vapour phase.     

Optimization of parameters for the alcoholic-assisted dispersive liquid–liquid microextraction of estrogens in water

Extraction and determination of estrogens in water samples were performed using alcoholic-assisted dispersive liquid–liquid microextraction (AA-DLLME) and high-performance liquid chromatography (UV/Vis detection). A Plackett–Burman design and a central composite design were applied to evaluate the AA-DLLME procedure. The effect of six parameters on extraction efficiency was investigated. The factors studied were volume of extraction and dispersive solvents, extraction time, pH, amount of salt and agitation rate. According to Plackett–Burman design results, the effective parameters were volume of extraction solvent and pH. Next, a central composite design was applied to obtain optimal condition. The optimized conditions were obtained at 220 μL 1-octanol as extraction solvent, 700 μL ethanol as dispersive solvent, pH 6 and 200 μL sample volume. Linearity was observed in the range of 1–500 μg L^?1 for E2 and 0.1–100 μg L^?1 for E1. Limits of detection were 0.1 μg L^?1 for E2 and 0.01 μg L^?1 for E1. The enrichment factors and extraction recoveries were 42.2, 46.4 and 80.4, 86.7, respectively. The relative standard deviations for determination of estrogens in water were in the range of 3.9–7.2 % (n = 3). The developed method was successfully applied for the determination of estrogens in environmental water samples.     

Determination of non-steroidal anti-inflammatory drugs in urine by the combination of stir membrane liquid–liquid–liquid microextraction and liquid chromatography

A stir membrane liquid phase microextraction procedure working under the three-phase mode is proposed for the first time for the determination of six anti-inflammatory drugs in human urine. The target compounds are isolated and preconcentrated using a special device that integrates the extractant and the stirring element. An alkaline aqueous solution is used as extractant phase while 1-octanol is selected as supported liquid membrane solvent. After the extraction, all the analytes are determined by liquid chromatography (LC) with ultraviolet detection (UV). The analytical method is optimized considering the main involved variables (e.g., pH of donor and acceptor phases, extraction time, stirring rate) and the results indicate that the determination of anti-inflammatory drugs at therapeutic and toxic levels is completely feasible. The limits of detection are in the range from 12.6 (indomethacin) to 30.7 μg/L (naproxen). The repeatability of the method, expressed as relative standard deviation (RSD, n = 5) varies between 3.4% (flurbiprofen) and 5.7% (ketoprofen), while the enrichment factors are in the range from 35.0 (naproxen) to 72.5 (indomethacin).     

Automated apparatus for the rapid determination of liquid–liquid and solid–liquid phase transitions

An automated apparatus developed for the determination of liquid–liquid and solid–liquid equilibrium temperatures with a resolution of 1 mK and a traceable accuracy of 0.01 K is described. The amount of light transmitted through six sample cells placed in a computer controlled thermostat is recorded at heating or cooling rates from 0.075 to 15 K h⁻¹. The construction does not require expensive optic equipment like lasers, glass fibre optics or photomultipliers, but is based on light emitting diodes (LED) as light sources and light dependent resistors (LDR) or photodiodes as detectors. As shown by the discussed examples, the instrument has a wide range of possible applications from the investigation of simple one-component and binary systems to the study of the complicated phase behavior of surfactant solutions.     

Estimation of spinodals from the density profile of the vapor–liquid interface

An extension of a recently proposed method for the calculation of the spinodals in pure fluid systems from the interfacial properties is elaborated, which requires the density profile as only input. The foundation of this approach is the so-called Fuchs-transformation which gives an estimate for the tangential pressure profile from the density profile. Using molecular dynamics simulation data for argon and carbon dioxide as well as lattice Boltzmann simulation data for the argon-like Shan–Chen fluid, the accuracy of the approach is analyzed. The Fuchs-transformation is qualitative, however it is possible to estimate the temperature–density projection of the spinodal. Depending on the underlying correlation function for the interfacial density profile reasonable results are obtained for the liquid and the vapor spinodal. The advantage of this method is that equilibrium data can be used to estimate the spinodal which is experimentally impossible to access because it is a highly non-equilibrium property. In the final consequence of this approach only the coexistence vapor and liquid densities are required to estimate the temperature–density projection of the spinodals.     

Why does the intermolecular dynamics of liquid biphenyl so closely resemble that of liquid benzene? Molecular dynamics simulation of the optical-Kerr-effect spectra

The combination of optical-Kerr-effect (OKE) spectroscopy and molecular dynamics simulations has provided us with a newfound ability to delve into the librational dynamics of liquids, revealing, in the process, some surprising commonalities among aromatic liquids. Benzene and biphenyl, for example, have remarkably similar OKE spectra despite marked differences in their shapes, sizes, and moments of inertia--and even more chemically distinct aromatics tend to have noticeable similarities in their spectra. We explore this universality by using a molecular dynamics simulation to investigate the librational dynamics of molten biphenyl and to predict its OKE spectrum, comparing the results with our previous calculations for liquid benzene. We suggest that the impressive level of quantitative agreement between these two liquids is largely a reflection of the fact that librations in these and other aromatic liquids act as torsional oscillations with oscillator frequencies selected from the liquid's librational bands. Since these bands are centered about the librational Einstein frequencies, the quantitative similarities between the liquids are essentially reflections of the near identities of their Einstein frequencies. Why then are the Einstein frequencies themselves so insensitive to molecular details? We show that, for nearly planar molecules, mean-square torques and moments of inertia tend to scale with molecular dimensions in much the same way. We demonstrate that this near cancellation provides both a quantitative explanation of the close relationship between benzene and biphenyl and a more general perspective on the similarities seen in the ultrafast dynamics of aromatic liquids.     

Determination of the copper activity of liquid CuLa alloys

The thermodynamic activities of liquid CuLa alloys were obtained at 1549 K by Knudsen effusion experiments. The experimentally known concentration and temperature dependences of thermodynamic properties of liquid CuLa alloys are explained on the basis of an association model. These results are discussed in comparison with the enthalpy of crystallization and the crystallization temperature as well as the enthalpy of melting and the melting temperature of lanthanum-rich glassy and crystalline alloys respectively.     

Dispersive liquid–liquid–liquid microextraction combined with liquid chromatography for the determination of chlorophenoxy acid herbicides in aqueous samples

A novel sample preparation method “Dispersive liquid–liquid–liquid microextraction” (DLLLME) was developed in this study. DLLLME was combined with liquid chromatography system to determine chlorophenoxy acid herbicide in aqueous samples. DLLLME is a rapid and environmentally friendly sample pretreatment method. In this study, 25 μL of 1,1,2,2-tetrachloroethane was added to the sample solution and the targeted analytes were extracted from the donor phase by manually shaking for 90 s. The organic phase was separated from the donor phase by centrifugation and was transferred into an insert. Acceptor phase was added to this insert. The analytes were then back-extracted into the acceptor phase by mixing the organic and acceptor phases by pumping those two solutions with a syringe plunger. After centrifugation, the organic phase was settled and removed with a microsyringe. The acceptor phase was injected into the UPLC system by auto sampler. Fine droplets were formed by shaking and pumping with the syringe plunger in DLLLME. The large interfacial area provided good extraction efficiency and shortened the extraction time needed. Conventional LLLME requires an extraction time of 40–60 min; an extraction time of approximately 2 min is sufficient with DLLLME. The DLLLME technique shows good linearity (r² ≥ 0.999), good repeatability (RSD: 4.0–12.2% for tap water; 5.7–8.5% for river water) and high sensitivity (LODs: 0.10–0.60 μg/L for tap water; 0.11–0.95 μg/L for river water).     

Development of an ionic liquid based dispersive liquid–liquid microextraction method for the analysis of polycyclic aromatic hydrocarbons in water samples

A simple, rapid and efficient method, ionic liquid based dispersive liquid–liquid microextraction (IL-DLLME), has been developed for the first time for the determination of 18 polycyclic aromatic hydrocarbons (PAHs) in water samples. The chemical affinity between the ionic liquid (1-octyl-3-methylimidazolium hexafluorophosphate) and the analytes permits the extraction of the PAHs from the sample matrix also allowing their preconcentration. Thus, this technique combines extraction and concentration of the analytes into one step and avoids using toxic chlorinated solvents. The factors affecting the extraction efficiency, such as the type and volume of ionic liquid, type and volume of disperser solvent, extraction time, dispersion stage, centrifuging time and ionic strength, were optimised. Analysis of extracts was performed by high performance liquid chromatography (HPLC) coupled with fluorescence detection (Flu). The optimised method exhibited a good precision level with relative standard deviation values between 1.2% and 5.7%. Quantification limits obtained for all of these considered compounds (between 0.1 and 7 ng L⁻¹) were well below the limits recommended in the EU. The extraction yields for the different compounds obtained by IL-DLLME, ranged from 90.3% to 103.8%. Furthermore, high enrichment factors (301–346) were also achieved. The extraction efficiency of the optimised method is compared with that achieved by liquid–liquid extraction. Finally, the proposed method was successfully applied to the analysis of PAHs in real water samples (tap, bottled, fountain, well, river, rainwater, treated and raw wastewater).     

Development of a dispersive liquid–liquid microextraction method for the determination of fluoroquinolones in chicken liver by high performance liquid chromatography

A simple and cost effective sample pre-treatment method, dispersive liquid–liquid microextraction (DLLME), has been developed for the extraction of six fluoroquinolones (FQs) from chicken liver samples. Clean DLLME extracts were analyzed for fluoroquinolones using liquid chromatography with diode array detection (LC-DAD). Parameters such as type and volume of disperser solvent, type and volume of extraction solvent, concentration and composition of phosphoric acid in the disperser solvent and pH were optimized. Linearity in the concentration range of 30–500 μg kg⁻¹ was obtained with regression coefficients ranging from 0.9945 to 0.9974. Intra-day repeatability expressed as % RSD was between 4 and 7%. The recoveries determined in spiked blank chicken livers at three concentration levels (i.e. 50, 100 and 300 μg kg⁻¹) ranged from 83 to 102%. LODs were between 5 and 19 μg kg⁻¹ while LOQs ranged between 23 and 62 μg kg⁻¹. All of the eight chicken liver samples obtained from the local supermarkets were found to contain at least one type of fluoroquinolone with enrofloxacin being the most commonly detected. Only one sample had four fluoroquinolone antibiotics (ciprofloxacin, difloxacin, enrofloxacin, norfloxacin). Norfloxacin which is unlicensed for use in South Africa was also detected in three of the eight chicken liver samples analyzed. The concentration levels of all FQs antibiotics in eight samples ranged from 8.8 to 35.3 μg kg⁻¹, values which are lower than the South African stipulated maximum residue limits (MRL).