机械化学合成CdS/TiO2复合纳米材料及其光催化性能研究

以纳米CdS和TiO2为原料,采用简便的机械化学法合成了CdS/TiO2复合光催化剂.用X射线衍射(XRD)、X射线光电子能谱(XPS)、激光拉曼光谱、透射电镜(TEM)、紫外-可见漫反射光谱(DRS)等手段对样品进行表征和分析.以亚甲基蓝为目标降解物,评价了其光催化活性.结果表明,机械化学有效促进了CdS在TiO2纳米颗粒表面的分散和相互作用,形成了CdS/TiO2复合纳米结构的光催化剂,25wt;-CdS/TiO2的可见光催化活性较纯CdS提高了5倍,在可见光照射下,其光电流响应提高了5倍.CdS/TiO2光催化活性的提高归结于CdS的表面杂化作用,提高了光生电子-空穴的有效分离与迁移.     

TiO2-ZnTiO3纳米复合薄膜的制备及光催化性能

将ZnO粉末加入TiO2溶胶中制备出TiO2/ZnTiO3复合薄膜.利用X射线衍射仪、扫描电子显微镜、X射线光电子能谱、紫外-可见吸收光谱对其形貌、晶体结构、化学组成和光谱响应特征进行了表征.以亚甲基蓝(MB)溶液的脱色降解为模型反应,考察了不同ZnO掺入比例对复合薄膜光催化性能的影响.结果表明,所得材料的光催化性能与复合结构中TiO2的结晶结构有关.Ti/Zn=6∶1时,所得复合薄膜由锐钛矿相TiO2与钙钛矿相ZnTiO3构成,薄膜中晶粒尺寸较小(约为30 nm)、结晶度较高、催化性能最好.在紫外光下5h可使亚甲基蓝(MB)溶液脱色降解率达到94;,明显高于纯TiO2薄膜(87;).     

SnO2负载TiO2纳米管的制备与光催化活性

结合阳极氧化法和脉冲沉积法合成SnO2/TiO2纳米管光催化剂,实现了SnO2纳米颗粒在TiO2纳米管表面的均匀负载.利用场发射扫描电子显微镜(FE-SEM)、能谱仪(EDS)、X射线衍射仪(XRD)以及紫外-可见漫反射光谱(UV-Vis DRS)对样品进行表征,以甲基橙为模拟污染物,评价了纳米管的光催化活性.结果表明,SnO2/TiO2纳米管经750℃煅烧后主晶相为锐钛矿相TiO2,含少量金红石相TiO2和SnO2,三者两两之间形成三元异质结,促进光生电子-空穴对的分离,此时SnO2/TiO2纳米管表现出最佳的光催化活性,紫外光下对甲基橙1 h分解比例由32.4;提升至96.5;.     

BiOCl/ZnO异质结型复合光催化剂的水热合成及其光催化性能

以醋酸锌、氯化钠、硝酸铋和氧氧化钠为原料,利用水热法合成了含BiOCl为1wt;、2wt;、4wt;、8wt;和16wt;的异质结型BiOCl/ZnO复合光催化剂.采用X射线粉末衍射(XRD)、扫描电镜(SEM)、傅里叶变换红外光谱(FT-IR)、紫外可见漫反射光谱(UV-Vis DRS)和光致发光(PL)谱等系列手段对所制备的光催化剂进行了表征.以紫外光(254 nm)为光源,酸性橙Ⅱ为光催化反应降解模型,进行光催化活性测试,考察了复合BiOCl对ZnO光催化剂反应活性和稳定性的影响.研究表明,异质结型BiOCl/ZnO复合光催化剂的光催化性能明显优于纯ZnO.当复合BiOCl的含量为4wt;时,光催化活性最佳,为纯ZnO的3.4倍,同时该催化剂在循环使用中具有更好的稳定性.     

三维有序大孔TiO2/CeO2光催化剂的制备及性能研究

以自组装SiO2纳米球为模板,通过煅烧和模板刻蚀制备具有三维有序大孔结构的TiO2/CeO2复合光催化剂(3DOM TiO2/CeO2).用XRD、SEM、FT-IR、DRS、PC等手段对所制备的光催化剂进行表征,在模拟太阳光下,以罗丹明B为模型降解物,对样品的光催化活性进行测试.结果表明,3DOM TiO2/CeO2的光催化降解活性与TiO2/CeO2相比得到进一步提高,其原因可能是由于3DOM结构可以产生慢光子效应,提高了TiO2/CeO2复合光催化剂的光吸收能力,进而提高了TiO2/CeO2的光催化性能.     

MoO3/TiO2复合催化剂的制备及光活性

以商业锐钛矿TiO2和钼酸铵水溶液作为前驱体,利用浸渍-焙烧的方法制备了MoO3与TiO2不同质量比率的MoO3/TiO2复合光催化剂.采用X射线衍射、高分辨透射电镜和紫外-可见漫反射对其进行了表征.以甲基橙为光催化反应的模型化合物,评价了其紫外光催化活性和MoO3/TiO2复合光催化剂的紫外产氢活性.通过添加各种自由基清除剂研究了甲基橙在光催化反应过程中的活性物种.结果表明:与纯的MoO3和TiO2相比,20; MoOJTiO2光催化剂在400 ～ 700 nm区域具有更强的光吸收性能并且吸收带边向长波方向移动.在所有MoO3/TiO2样品中,20; MoO3/TiO2光催化剂具有最高的紫外光活性.·OH,h+,·O2-和H2O2,特别是h+,共同支配了甲基橙的光催化降解过程.     

Ag3PO4/TiO2复合催化剂的制备及光催化性能研究

为提高纳米TiO2的光催化降解性能和稳定性,采用两步水热法制备具有高催化性能的Ag3PO4/TiO2复合催化剂,采用XRD、SEM、EDS、XPS、TEM等仪器对其表面微观形貌和形态大小、表面元素组成、物相结构等进行表征,并研究了TiO2的比表面积和Ag3PO4颗粒尺寸大小对Ag3PO4/TiO2光催化性能的影响.以亚甲基蓝(MB)和苯酚为目标降解物来考察复合光催化剂的光催化性能.结果表明:1h后Ag3PO4、TiO2、Ag3PO4/TiO2对亚甲基蓝的降解率为25;、42;、92;;复合光催化剂Ag3PO4/TiO2经过5次光催化降解实验后,对亚甲基蓝的降解率仍可达78;.     

镧掺杂混晶结构TiO2纳米粉体的制备及其光催化性能

以钛酸四丁酯为Ti源,采用溶胶-凝胶自蔓燃法制备了镧掺杂的La-TiO2(简写为LT)纳米粉体.利用X射线粉末衍射(XRD)、红外光谱(FIIR)、透射电子显微镜(TEM)等对掺杂型TiO2粉体的晶型结构与颗粒尺寸等进行表征.利用紫外-可见光吸收光谱(UV-vis)研究了H2O2改性、镧掺杂量以及混晶结构对TiO2纳米粉体降解甲基橙的影响.结果表明:镧掺杂混晶TiO2粉体的光催化活性明显优于未掺杂的锐钛矿TiO2粉体.当La3+掺杂量为0.5;,合成温度为475℃(金红石相含量为26.0;)时,得到的TiO2粉体光催化活性最好.H2O2的加入有助于TiO2光催化剂表面的电子-空穴对生成,提高光催化剂对甲基橙的降解率,当H2O2浓度为6;时,光照3h后,降解率达到了91.97;.     

可见光响应氮掺杂TiO2制备与性能表征

采用水热法制备了可见光响应的氮掺杂TiO2光催化剂,利用XRD、SEM、XPS、UV-vis对样品结构、形貌和光谱等性质进行表征.研究结果表明:氮掺杂抑制晶粒长大,促进晶格畸变;氮进入TiO2晶格中,引起TiO2光催化剂的激发,吸收光谱向低能方向移动.以降解甲基橙为模型反应,研究样品的光催化性能;以对苯二甲酸作为·OH自由基捕获剂,利用化学荧光技术研究光催化反应体系中·OH自由基生成量.结果表明:与纯TiO2相比,氮掺杂样品具有较高的光催化活性.这与下列因素有关:氮掺杂样品具有较小的晶粒尺寸,有利于促进光生电荷的分离与相界面上电荷转移效率,降低TiO2能隙并使吸收光谱红移.在实验条件下,光催化性能随n(N/Ti)比值的增大而增强;羟基自由基的生成速率与光催化活性规律一致,即·OH的生成速率越大,光催化活性越高.     

Bi3Ti4O12/α-Bi2O3/TiO2复合光催化剂的制备及其可见光催化活性研究

以工业二氧化钛(TiO2)、五水合硝酸铋(Bi(NO3)3·5H2O)为原料制备了Bi3Ti4O12/α-Bi2O3/TiO2复合光催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)、紫外-可见吸收光谱(UV-Vis)、荧光光谱(PL)等表征方法对光催化剂结构进行分析,表明复合样品中形成了Bi3 Ti4 O12/α-Bi2 O3/TiO2异质结结构,其禁带宽度减小、吸收带边红移,光催化效率有明显提高.以亚甲基蓝为目标污染物评价其光催化活性,TiO2与Bi(NO3)3·5H2O质量比为1:2.5,煅烧温度为600℃,煅烧时间为5 h时,复合样品光催化活性最佳,在12 W LED灯下,180 min后对浓度为10 mg/L的亚甲基蓝溶液的去除率达96.8;.     

A review of measurement of thermophysical properties of silicon melt

Measurements of thermophysical properties of Si melt and supplementary study of X-ray scattering/diffraction by the authors' group were reviewed. The values obtained differed variously from those of literature. Density was 2–3% larger, surface tension 20–30% smaller, viscosity up to 40% larger, electrical conductivity 8% smaller, spectral emissivity more or less in good agreement with literature values, and thermal diffusivity a few percent larger. An anomalous density jump was found near the melting point. Surface tension and viscosity also showed anomaly. A strange time-dependent change of density was observed over 3 h after melting. X-ray analyses suggested a slight change in local atom ordering, but showed no sign of cluster formation. An addition of 0.1 at% gallium caused the density jump to disappear, while that of boron caused no change. An EXAFS study of the former melt indicated a strong interaction between Ga and Si atoms as if molecules of GaSi₃ existed. The implications of the measured properties are a possibility of soft-turbulence in an Si melt in a relatively large crucible, a more complicated manner of intake of oxygen depleted molten Si from the free surface region to underneath the growing crystal, and a relaxation of the melt after melting arising from trapped gas species.     

原位氮化法制备TiN纳米粉体

用溶胶凝胶法合成的纳米TiO2粉体作为原料,将该粉体在氨气中进行原位氮化制备了TiN纳米粉体.用XRD,TEM,化学分析等手段对合成的TiN纳米粉体的物相组成、形貌、成分进行了分析.实验分析表明:在1000℃和1100℃下分别氮化5h,可以制备粒径大约为40nm和80nm的TiN粉体,其TiN的含量分别为95.40;和98.37;;而在1000℃条件下氮化时间减少到2h时,TiN的含量仅为58.36;.氮化温度和氮化时间是合成纳米TiN的重要因素,提高合成温度和延长氮化时间均可形成纯度较高的TiN纳米粉体,但延长氮化时间更有利于获得粒径小的氮化钛粉体.     

Mesomorphism Dependence on the Position of Substitution of a Pair of Esters

A novel homologous series of ethylene derivatives of thermotropic liquid crystals has been synthesized. The methoxy to octyloxy derivatives are nematogenic, the decyloxy to tetradecyloxy derivatives are smectogenic, in addition to nematogenic, and the hexadecyloxy homologue is smectogenic only. All the members of the series are enantiotropically mesogenic. Thermotropic behavior was determined by an optical polarizing microscope equipped with a heating stage and Differential Scanning Calorimetry (DSC) study. Analytical and spectral data confirm the molecular structures of homologues (infrared, nuclear magnetic resonance, mass spectra, X-ray, and DSC data). Textures of the nematic phase are threaded or Schlieren and that of smectic phase are focal conic fan-shaped of smectic A or C. Transition curves of the phase diagram behave in a normal manner except one or two deviations from the normal trend. The mesophase range (Sm+N) varies from 3°C to 44°C. The average thermal stability for smectic is 93°C and that for nematic 117.4°C. The LC behavior of the novel series is compared with a structurally similar known series.     

Effect of alumina on enthalpy of mixing of mixed alkali silicate glasses

The enthalpy of mixing of mixed alkali (Na₂O and K₂O) silicate glasses containing various concentrations of alumina was determined using an ion-exchange equilibrium method. For glasses with a constant alkali concentration, the enthalpy of mixing was found to become less negative with alumina addition. Consistent with our previous results on the enthalpy of mixing of alumina-free mixed alkali silicate glasses, the magnitude of enthalpy of mixing exhibited a good correlation with the molar volume mismatch of the corresponding two single alkali glasses as well as with the extent of conductivity mixed alkali effect, e.g. excess activation energy of conductivity, ΔE. The reduction of the magnitude of the enthalpy of mixing with alumina addition can be attributed to the reduction of non-bridging oxygen and ionic field strength. Combining the present results with results obtained earlier, the magnitude of the enthalpy of mixing for all mixed alkali (Na₂O and K₂O) silicate glasses with and without alumina was expressed by a simple function of a modified Tobolsky parameter, which takes into account the alkali concentration and the difference in cation-to-effective anion distances. The enthalpy of mixing data of the mixed alkali glasses was then compared with reported experimental data on the conductivity of mixed alkali aluminosilicate glasses. What appears to be conflicting experimental data can be understood in terms of the magnitude of the enthalpy of mixing and we can conclude that the mixed alkali effect is closely correlated with the negative enthalpy of mixing.     

电子显微分析在表征纳米晶体化学组分中的应用

纳米材料的化学组分及含量影响其光、电、声、热、磁等物理性能,电子显微分析是表征纳米晶体化学组分的重要方法之一.本文综述了X-射线能谱(EDS)、X-射线波谱(WDS)、电子能量损失谱(EELS)和选区电子衍射(SAED)等现代电子显微分析技术在表征纳米晶体化学组分、形貌、尺寸和结构等方面的应用及其研究进展,并比较了这些分析方法存在的差异,提出了其应用中存在的不足及今后的研发方向.     

Ni-ZrO2纳米复合电铸层的制备及纳米颗粒分布均匀性研究

研究了在复合电铸过程中,当其它工艺参数一定时,复合电铸层的沉积速率及其厚度随时间的变化趋势, 以及复合电铸层表面微观形貌随电沉积时间的变化趋势.测定了复合电铸层的组织成分,并就纳米颗粒在复合电铸层表面和横截面上分布的均匀性进行了评价.结果表明,复合电铸层表面平整,组织均匀致密,其组成主要是镍和所复合的纳米颗粒,纳米颗粒较为均匀地分散在复合电铸层中.     

Evolution of the Defect Structure of Zinc-Oxide as a Consequence of Tribophysical Activation

Zinc-oxide powder was tribophysically activated in a high-energy vibro mill in a continual regime in air for 3, 30 and 300 minutes with the purpose of modifying the powders physico-chemical properties. By analyzing of data obtained by X-ray powder diffraction, electron diffraction and transmission electron microscopy, the values of distances between corresponding crystallographic planes, average domain sizes of coherent scattering, i.e. crystallites, width of diffraction lines due to the existence of microstrains, and microstrain values, minimal dislocation densities, dislocation density due to microstrain and real dislocation density, and also average distances between dislocations were determined. The dependence of these values on the activation time was established, which enabled analysis of the evolution of the defect structure of zinc-oxide powders during tribophysical activation by grinding in the described regime.     

Some peculiarities of spectral proprieties of leukocytes

This article presents the results of spectral investigations of white blood human cells including absorption, fluorescence and phosphorescence (using low-temperature measurements). For this research, the main optical centres were identified and local distribution of emitting and absorbing centres into white blood human cells was determined. In addition, the spectra of normal and pathological (B-cell chronic lymphocytic leukemia, B-CLL) cells were compared.     

立方晶系晶体本征铁弹相变序参量的选取

在本征铁弹相变的软模理论的基础上,依据弹性本构关系和居里原理,给出了立方晶系晶体所有可能的自发应变的种类,研究了立方晶系晶体本征铁弹相变序参量的选取问题.以Th群和Oh群为例,阐明了不同类的序参量导致晶体对称性变化相同的的原因,提出了该情况下序参量选取的“就少不就多”的原则.得到了发生本征铁弹相变时所有可能的序参量及晶体的对称性的变化.     

Features of transformations in REE-containing systems of nitrate precursors in preparatory processes of formation of multifunctional oxide materials

Abstract

The complex study provides a reliable idea of ??the trends in the joint behavior of structural components in the water-salt systems of nitrate precursors of REE, alkaline, alkaline earth metals in the preparatory stages of the processes of forming multicomponent oxide polyfunctional materials on their basis with thermal activation. Stages of such transformations are revealed; The regularities of complex and phase formation in systems and factors influencing them are determined; A number of physicochemical properties of the intermediate phases formed - coordination lanthanides nitrates: their composition, types of compounds, atomic-crystalline structure, regularities of transformations during heat treatment were studied.