Titrametric characterization of pH-induced phase transitions in functionalized microgels

The chain and radial functional group distributions in carboxylic acid-functionalized poly(N-isopropylacrylamide)-based microgels have significant impacts on the types of swelling responses exhibited by the microgels upon the application of a temperature and/or pH stimulus. Potentiometric, conductometric, and calorimetric titration approaches are used in this work to characterize the chain distributions of -COOH groups in five microgels prepared using different -COOH-functionalized monomers. A direct correlation is observed between the kinetically predicted formation of functional monomer blocks within the microgel, the excess Gibbs free energy of ionization, and the apparent pK(a) versus degree of ionization profiles generated from potentiometric titration. Isothermal titration calorimetry (ITC) can be used to quantify the relative number of functional groups present in microgels prepared with the same functional monomer and/or identify differences between microgels with the same bulk -COOH content but different chain distributions. In particular, microgels prepared with diacid-functionalized monomers exhibit a characteristic two-step ITC profile. For microgels with the same bulk -COOH content, the heat of ionization measured via ITC increases systematically with the overall change in both the pK(a) and the excess Gibbs free energy for microgels prepared with monoacid-functionalized monomers. Diacid monomer-functionalized microgels have lower ionization enthalpies attributable to the break-up of hydrogen-bonded intramolecular ring complexes upon carboxylic acid ionization. The inferred chain functional group distributions can be used to understand differences in microgel swelling across the pH-induced phase transition.     

Preparation of Poly(N‐isopropylacrylamide) Microgels using Different Initiators Under Various pH Values

Ammonium persulfate (APS), 2,2′‐azobis(amidinopropane) dihydrochloride (V50) and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) were utilized to prepare temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAM) microgels by precipitation polymerization under various reaction pH conditions. Their particle sizes and swelling ratios depended on the reaction pH due to the pH dependence on the ionization degree of the decomposed fragments originating from the initiators and their hydrophilicity‐hydrophobicity. The more hydrophobic initiator, under the reaction pH conditions used, could be partitioned to a greater extent into the microgel particles due to the hydrophobicity of PNIPAM chains at the reaction temperature, which led to a more cross‐linked structure inside the microgels resulting in their smaller swelling ratio. pH dependence of surface charge density of the microgels with amidino groups or carboxylic acid groups on their surfaces was evidenced by the variation of their zeta potentials as a function of pH.     

Dynamic control of volume phase transitions of poly(N‐isopropylacrylamide) based microgels in water using hydrazide‐aldehyde chemistry

We demonstrate that the volume phase transition temperature (VPTT) of copolymer microgel particles made from N‐isopropylacrylamide (NIPAm) and methacryloyl hydrazide (MH) can be tailored in a reversible manner upon the reaction of the hydrazide functional groups with aldehydes. The microgels were synthesized by precipitation polymerization in water. Due to the water‐soluble nature of the MH monomer, the VPTT at which the microgel particles contract shifts to higher values by increasing the incorporated amounts of methacryloyl hydrazide from 0 to 5.0 mol %. The VPTT of the copolymer microgel dispersions in water can be fine‐tuned upon addition of hydrophobic/hydrophilic aldehydes, which react with the hydrazide moiety to produce the hydrazone analogue. This hydrazone formation is reversible, which allows for flexible, dynamic control of the thermo‐responsive behavior of the microgels. The ability to “switch” the VPTT was demonstrated by exposing hydrophilic streptomycin sulfate salt incubated microgel particles to an excess of a hydrophobic aldehyde, that is benzaldehyde. The temperature at which these microgels contracted in size upon heating was markedly lowered in these aldehyde exchange experiments. Transformation into benzaldehyde hydrazone derivatives led to assembly of the microgel particles into small colloidal clusters at elevated temperatures. This control of supracolloidal cluster formation was also demonstrated with polystyrene particles which had a hydrazide functionalised microgel shell. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1745–1754     

Glucosamine-carrying temperature- and pH-sensitive microgels: preparation, characterization, and in vitro drug release studies

Glucosamine-carrying temperature- and pH-sensitive microgels with an average diameter of about 100 nm were successfully prepared by free radical precipitation polymerization. The thermo- and pH-responsive properties of the microgels were designed by the incorporation of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc) to copolymerize with acrylamido-2-deoxyglucose (AADG). The stimuli sensitivity of the microgels was studied by the measurement of their sizes and volume phase transition temperature (VPTT) under different surrounding conditions. The results showed that the microgels were responsive to temperature, pH, and ionic strength, and could have a desired VPTT by modifying AADG and AAc contents. The effect of temperature and pH on insulin release from the microgels was also investigated. The release of drug at the tumor-surrounding environment is faster than that under normal physiological conditions. A preliminary in vitro cell study showed that the glucosamine-carrying microgels are more biocompatible to mouse fibroblast cells, compared to the microgels without glucosamine. These glucosamine-carrying dual-sensitive microgels may be promising carriers for targeted drug delivery to tumors.     

核壳结构葡萄糖敏感微凝胶的制备

用先合成聚N-异丙基丙烯酰胺(PNIPAM)微凝胶核再包一层N-异丙基丙烯酰胺/丙烯酸共聚物(P(NIPAM-co-AA))壳的办法合成了一系列核壳结构微凝胶.微凝胶壳层厚度随投入的壳储备溶液的增加而增加.研究了pH=3.5时核壳微凝胶的温敏体积相转变行为.由于PNIPAM核和P(NIPAM-co-AA)壳的相转变温度很接近,因此只观察到一个相转变.在EDC催化下使3-氨基苯硼酸与壳层中的羧基反应,将苯硼酸基(PBA)引入微凝胶,得到核为PNIPAM、壳为P(NIPAM-co-AMPBA)的核壳结构微凝胶.改性后的微凝胶表现出3个体积相转变过程.其中第一个对应于P(NIPAM-co-AMPBA)壳层的体积相转变.第二和第三个则是PNIPAM核的相转变过程.由于在沉淀聚合时交联剂BIS反应性更大,PNIPAM核结构不均一,形成BIS含量高的"核"和BIS含量低的"壳".BIS含量低的"壳"被一层疏水的P(NIPAM-co-AMPBA)壳包裹,拉大了其与"核"的相转变温度的差别,因此随着温度升高表现出两个相转变过程.PBA改性的微凝胶同样表现出葡萄糖敏感性,但在葡萄糖存在下溶胀度的改变较小.     

侧链含不同功能性羟基的温敏性N-异丙基丙烯酰胺共聚物微凝胶的制备及性能比较

选择含有活性羟基的亲水单体多缩乙二醇单甲基丙烯酸酯(PEGMA)、甲基丙烯酸羟乙酯(HEMA),分别和N-异丙基丙烯酰胺(NIPAM)交联共聚,制备了侧链含有功能性羟基、链长不同的温敏性微凝胶.研究发现,亲水单体HEMA和PEGMA的引入对微凝胶的去溶胀性能有不同的影响,PEGMA的引入使得微凝胶的体积相转变温度升高,微凝胶的去溶胀比随着PEGMA投料比的增加而降低.而HEMA的引入使得微凝胶的体积相转变温度降低;微凝胶的去溶胀比随着HEMA投料比的增加先是增加然后降低,当HEMA的投料比为8mol%时,去溶胀比达到最大.     

Equilibrium and kinetic aspects of the uptake of poly(ethylene oxide) by copolymer microgel particles of N-isopropylacrylamide and acrylic acid

The use of microgels for controlled uptake and release has been an area of active research for many years. In this work copolymer microgels of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc), containing different concentrations of AAc and also cross-linking monomer, have been prepared and characterized. These microgels are responsive to pH and temperature. As well as monitoring the equilibrium response to changes in these variables, the rates of swelling/de-swelling of the microgel particles, on changing either the pH or the temperature, have also been investigated. It is shown that the rate of de-swelling of the microgel particles containing AAc is much faster than the rate of swelling, on changing the pH appropriately. This is explained in terms of the relative mobilities of the H(+) and Na(+) ions, in and out of the particles. It was observed that the microgels containing AAc, at pH 8, de-swelled relatively slowly on heating to 50 degrees C from 20 degrees C. This is attributed to the resistance to collapse associated with the large increase in counterion concentration inside the microgel particles. The swelling and de-swelling properties of these copolymer microgels have also been investigated in aqueous poly(ethylene oxide) (PEO) solutions, of different MW (2000-300 000). The corresponding absorbed amounts of PEO from solution onto the microgels have also been determined using a depletion method. The results, as a function of AAc content, cross-linker concentration, PEO MW, pH, and temperature, have been rationalized in terms of the ease and depth of penetration of the PEO chains into the various microgel particles and also the H-bonding associations between PEO and either the -COOH of the AAc moeities and/or the H of the amide groups (much weaker). Finally, the adsorption and desorption of the PEO molecules in to and out of the microgel particles have been shown to be extremely slow compared to normal diffusion time scales for polymer adsorption onto rigid surfaces.     

Symmetric and asymmetric adsorption of pH-responsive gold nanoparticles onto microgel particles and dispersion characterisation

The interaction between carboxylic acid-stabilised gold nanoparticles (AuNP) and pH-responsive microgels is shown. The microgel particles are a copolymer of N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA) and N-isopropylacrylamide (NIPAM). The microgel properties are presented by their hydrodynamic diameter and electrophoretic mobility in response to pH. These microgel particles are pH-responsive under neutral conditions decreasing in diameter beyond pH 7. The dispersion characteristics of AuNP adsorbed onto the microgel network are shown with respect to adsorbed amount and the pH-responsive properties of the AuNP. This data is presented between pH 3 and 6 where the microgel properties remain constant. Asymmetric adsorption of AuNP onto poly(DMAPMA-co-NIPAM) microgels is achieved by adsorption of nanoparticles, from the aqueous phase, onto microgel-stabilised oil-in-water emulsions. These asymmetrically modified microgels display very different dispersion behaviour, in response to pH, due to their dipolar nature.     

Determination of pK(a) values of diastereomers of phosphinic pseudopeptides by CZE

A CE method was used for the determination of acidity constants (pK(a)) of a series of ten phosphinic pseudopeptides, which varied in number and type of ionogenic groups. Effective electrophoretic mobilities were measured in the 1.8-12.0 pH range in the BGEs of constant ionic strength of 25 mM. Effective electrophoretic mobilities, corrected to standard temperature of 25 degrees C, were subjected to non-linear regression analysis and the obtained apparent pK(a) values were recalculated to thermodynamic pK(a)'s by extrapolation to zero ionic strength according to the extended Debye-Hückel model. The pK(a) values of the phosphinic acid group fell typically in the 1.5-2.25 interval, C-terminal carboxylic groups in the 2.94-3.50 interval, carboxylic groups of the lateral chain of glutamate and aspartate in the 4.68-4.97 interval, imidazolyl moiety of histidine in the 6.55-8.32 interval, N-terminal amino groups in the 7.65-8.28 interval and epsilon-amino group of the lateral chain of lysine in the 10.46-10.61 interval. Further, separation of diastereomers of the phosphinic pseudopeptides was investigated in achiral BGEs. Evaluation of the resolution of the diastereomers as a function of pH of the BGE revealed that most suitable pH region for separation of the diastereomers is around the pK(a) values of the central phosphinic acid group of the pseudopeptides. Successful separation of some diastereomers was, however, achieved in the neutral and alkaline BGEs as well.     

Novel multiresponsive microgels: synthesis and characterization studies

The dispersion polymerization of 2-(N-morpholino)ethyl methacrylate (MEMA) in the presence of ethylene glycol dimethylacrylate (EGDMA) cross-linker and diblock copolymer stabilizer in n-hexane afforded sterically stabilized multiresponsive PMEMA microgels. By changing the reaction parameters, a wide range of particle sizes (120-720 nm) was obtained. Both dynamic light scattering and electron microscopy studies confirmed monodisperse spherical morphologies. These microgels had a response to the solution pH, temperature, and ionic strength. As expected, PMEMA microgels acquired cationic character at low pH because of the protonation of all morpholino groups. Although PMEMA microgels are in a swollen state in both acidic media and at low temperatures, they are in a deswollen state in basic media at high temperatures and in the presence of electrolytes above pH 6. In addition to these multiresponsive behaviors, PMEMA microgels have the ability to swell in various organic solvents. They also interact very well with magnetic particles and gain responsiveness to the magnetic field. Multiresponsive behaviors of PMEMA microgels were investigated by using DLS, UV-vis spectrophotometry, and zeta potentiometry.     

Emulsions stabilized by stimuli-sensitive poly(N-isopropylacrylamide)-co-methacrylic acid polymers: microgels versus low molecular weight polymers

Responsive polymer microgels can be employed for the preparation of stimuli-sensitive emulsions. The microgels used in this study are based on cross-linked copolymers including N-isopropylacrylamide and methacrylic acid. We conducted the synthesis under acidic and basic conditions to investigate the effect of changes of comonomer solubility on the microgel's composition and ability to stabilize emulsions. The synthesis product was partially divided into two fractions by centrifugation. Raw product, collected supernatant, and purified microgel were characterized by means of light scattering, titration, as well as electrophoretic mobility. The ability of the three components to act as stabilizers was investigated by preparing the octanol/water emulsions and looking at their response to pH and temperature changes. The interfacial activity of the three components was characterized by means of the pendent drop technique. Furthermore, we investigated the response of the interface to dilatational stress using a pendant drop tensiometer equipped with an oscillating drop module. The results demonstrate that the pH during synthesis has a significant impact on the composition and thus the properties of the microgel and its ability to be utilized as a stimuli responsive stabilizer for emulsions. We conclude that microgels can be used as stimuli-sensitive stabilizers for emulsions, if the charges are incorporated in the microgel itself.     

Study of pH-responsive microgels containing methacrylic acid: effects of particle composition and added calcium

pH-responsive microgel dispersions contain cross-linked polymer particles that swell when the pH approaches the pKa of the ionic monomer incorporated within the particles. In recent work from our group, it was demonstrated that the mechanical properties of degenerated intervertebral discs (IVDs) could be restored to normal values by injection of pH-responsive microgel dispersions (Saunders, J. M.; Tong, T.; LeMaitre, C.; Freemont, A. J.; Saunders, B. R. Soft Matter 2007, 3, 486). These dispersions change from a fluid to a gel with increasing pH. The present work investigates the pH-dependent properties of dispersions of microgel particles containing MAA (methacrylic acid) and also the effects of added Ca2+. Two microgels are discussed: microgel A is poly(EA/MAA/AM) (EA and AM are ethyl acrylate and allyl methacrylate), and microgel B is poly(EA/MAA/BDDA) (butanediol diacrylate). The pH-dependent particle properties investigated include hydrodynamic diameters and electrophoretic mobilities. The critical coagulation concentrations (CCC) of dilute dispersions and the elastic modulus (G') of concentrated, gelled microgel dispersions were also investigated. In the absence of added Ca2+, the particle swelling and G' were smallest and largest, respectively, for microgel A. The changes in hydrodynamic diameter and mobility with pH were explained in terms of a core-shell swelling mechanism. Added Ca2+ was found to significantly decrease the CCCs, extents of particle swelling, and magnitude of the electrophoretic mobility. This was attributed to the ionic cross-linking of neighboring RCOO- groups by Ca2+. It is suggested that the formation of ionic cross-links is inefficient within the microgel particles because of the presence of covalent cross-links that oppose the large-scale conformational rearrangement of neighboring RCOO- groups. The effect of Ca2+ on the properties of the gelled dispersions is important from the viewpoint of potential application in vivo. Rheological studies of the gelled microgel dispersions showed that added Ca2+ did not have a specific influence on G'. The differences observed in the presence of Ca2+ were attributed to ionic strength effects (screening). The key parameter that controls G' of the gelled microgel dispersions is pH. The results from this work suggest that the elasticity of the gels would be slightly reduced in vivo as a consequence of the high ionic strength present.     

Photo-, thermally, and pH-responsive microgels

Microgels with photo-, thermally, and pH-responsive properties in aqueous suspension have been synthesized and characterized using dynamic light scattering and UV-visible spectroscopy. The new route involved first preparing poly(N-isopropylacrylamide) (PNIPAM)-allylamine copolymer microgels and a spiropyran photochrome (SP) bearing a carboxylic acid group. Then the functionalized spiropyran was coupled to the microgel via an amide bond. The dark-equilibrated gel particles feature spiropyran molecules in the polar, merocyanine form. After irradiation of visible light, the particle size becomes smaller because spiropyran changes to the relatively nonpolar, closed spiro form. The PNIPAM-SP microgels undergo a volume phase transition in water from a swollen state to a collapsed state with increasing temperature under all light conditions. However, the transition temperature range of the PNIPAM-SP is much broader than that for the PNIPAM without SP. The PNIPAM-SP microgels are monodisperse and self-assemble into a crystalline lattice while in suspension. The UV-visible spectra of an aqueous suspension of PNIPAM-SP microgel in the dark-adapted, merocyanine form showed both an absorption peak around 512 nm due to the merocyanine (giving a reddish color to the suspension) and two sharp peaks from Bragg diffraction of colloidal crystallites. Upon visible irradiation, the 512-nm band bleached significantly due to spiropyran photoisomerization. The spiropyran photoisomerization and accompanying color changes of the suspension were reversible upon alternating dark, UV, and visible light irradiation. Due to the residues of amine groups, the swelling capability of PNIPAM-SP microgels reduces as the pH value is changed from 7 to 10.     

Electrokinetic behaviour of polymer colloids with adsorbed Triton X-100

An experimental study on the electrophoretic mobility (µ_e) of polystyrene particles after adsorption of Triton X-100 (TX100) is described. Three polystyrene particles with different functionality (sulphate, carboxyl and amidine) were used as solid substrate for the adsorption of the surfactant. The electrophoretic mobility of the polystyrene-TX100 complexes at different electrolyte concentrations has been studied versus the amount of adsorbed surfactant. The presence of TX100 onto the colloidal particles seems to produce a slight shifting of the slipping plane. This is observed for electrolyte concentrations above ~10^-3 M. On the other hand, the electrophoretic mobilities of the latex-surfactant complexes with maximum surface coverage were measured versus pH and salt concentration. Specific ion interactions between H⁺/carboxyl groups and OH^-/amidine groups appeared at extreme pH which explain the anomalous electrophoretic behaviour encountered in the region where surface charge change.     

Preparation and Swelling Properties of Poly(NIPAM) "Minigel" Particles Prepared by Inverse Suspension Polymerization

The characterization of temperature- and pH-sensitive poly-N-isopropylacrylamide (poly-NIPAM) microgel particles, produced by surfactant-free emulsion polymerization, has been extensively reported. In the work described here poly(NIPAM) gel particles, cross-linked with N-N'-methylenebisacrylamide (BA), have been produced using inverse suspension polymerization. These particles have been termed "minigels" here since they are somewhat larger than conventional microgels. Results suggest that minigel particles are formed as a dilute suspension, within the aqueous dispersed (droplet) phase. The hydrodynamic diameter of the minigel particles produced in this work is 相似文献   

Deswelling comparison of temperature‐sensitive poly(N‐isopropylacrylamide) microgels containing functional ?OH groups with different hydrophilic long side chains

Two monomers containing functional ? OH groups with different hydrophilic long side chains (viz., triethyleneglycol methacrylate (TREGMA) and polyethyleneglycol methacrylate (PEGMA)) were selected to modify the swelling/deswelling behavior of poly(N‐isopropylacrylamide) (pNIPAM) microgels. Dynamic scattering technique, turbidimetric method, and differential scanning calorimetry (DSC) were employed to investigate the deswelling behavior of the microgels. Experimental results show that the two series of microgels are identical in that incorporation of hydrophilic chains containing ? OH groups causes the volume‐phase transition temperature (VPTT) of pNIPAM microgels to shift to higher temperature; the more hydrophilic the side chains, the more the VPTTs shift. Although PEGMA are more effective in elevating the VPTTs of pNIPAM microgels than TREGMA, p(NIPAM‐co‐TREGMA) microgels show better deswelling properties than p(NIPAM‐co‐PEGMA) microgels, i.e., they have much larger deswelling ratios (α) and display less continuous volume‐phase transition. The VPTTs of the modified microgels can be modulated to well close to the normal body temperature of human beings. These characteristics along with the functional ? OH groups they contain make the microgels competitive candidates for biomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3575–3583, 2005     

One-step preparation of uniform cane-ball shaped water-swellable microgels containing poly(N-vinyl formamide)

In this study we report the preparation of a new family of core-shell microgels that are water-swellable and have a morphology that is controllable by particle composition. Here, nearly monodisperse core-shell PNVF-xGMA [poly(N-vinylformamide-co-glycidyl methacrylate)] particles (where x is the weight fraction of GMA used) were prepared via nonaqueous dispersion (NAD) polymerization in one step. The shells were PGMA-rich and were cross-linked by reaction of epoxide groups (from GMA) with amide groups (from NVF). The core of the particles was PNVF-rich. A bifunctional cross-linking monomer was not required to prepare these new microgels. The particles had a remarkable "cane-ball"-like morphology with interconnected ridges, and this could be controlled by the value for x. The particle size was tunable over the range 0.8-1.8 μm. Alkaline hydrolysis was used to hydrolyze the PNVF segments to poly(vinylamine), PVAM. The high swelling pressure of the cationic cores caused shell fragmentation and release of some of the core polymer when the hydrolyzed particles were dispersed in pure water. The extent to which this occurred was controllable by x. Remarkably, the PGMA-rich shells could be detached from the hydrolyzed particles by dispersion in water followed by drying. The hydrolyzed PNVF-0.4GMA particles contained both positively and negatively charged regions and the dispersions appeared to exhibit charge-patch aggregation at low ionic strengths. The new cross-linking strategy used here to prepare the PNVF-xGMA particles should be generally applicable for amide-containing monomers and may enable the preparation of a range of new water-swellable microgels.     

Synthesis strategies to incorporate acrylic acid into N‐vinylcaprolactam‐based microgels

Two different synthesis strategies were used to synthesize N‐vinylcaprolactam (VCL)‐acrylic acid (AA)‐based temperature‐ and pH‐sensitive microgels under the adequate conditions to avoid possible hydrolysis of VCL due to the presence of carboxylic groups provided by AA. Polymeric and colloidal features of the microgels were analyzed: the partial conversion evolutions of each comonomer were determined by ¹H NMR and the swelling/deswelling behavior by means of Photon Correlation Spectroscopy. Considering that microgels are porous soft nanoparticles, conductimetric titrations at the swollen state were carried out to calculate the volumetric charge density. The results indicate that the addition of AA after 30 minutes of reaction time helped to incorporate higher amounts of AA into microgels and as a result, to obtain both temperature‐ and pH‐sensitive nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymer microgels by precipitation polymerisation of N-vinylcaprolactam and N-isopropylacrylamides in aqueous medium

In this work, we designed copolymer microgels by the copolymerisation of N-vinylcaprolactam (VCL) and two acrylamides (N-isopropylacrylamide (NIPAAm) and N-isopropylmethacrylamide (NIPMAAm)) under precipitation conditions in aqueous phase. In synthesis protocols, the ratio between monomers was varied from 1:5 to 5:1 mol/mol. By NMR and Raman spectroscopy, we determined the chemical composition of PVCL/NIPAAm and PVCL/NIPMAAm copolymer microgels reflecting the initial monomer ratio in the reaction mixture. The hydrodynamic radii of PVCL/NIPAAm microgels are around 375 nm (at 25 °C) and do not vary with the copolymer composition. On the contrary, for PVCL/NIPMAAm microgels, the size decreases from 450 to 250 nm with an increase of the VCL amount in copolymer structure. The heterogeneity of the microgel structure in terms of the distribution of the monomer units was probed by ¹H transverse magnetization relaxation NMR, showing that the VCL, NIPAAm and NIPMAAm units are unorderly distributed in the colloidal networks. The investigation of volume phase transition temperature (VPTT) for copolymer microgels was performed using dynamic light scattering, NMR and differential scanning calorimetry. It has been found that PVCL/NIPAAm microgels show VPTT around 35 °C independently from the copolymer composition; however, PVCL/NIPMAAm particles exhibit a nonlinear increase of VPTT from 34 to 45 °C as the NIPMAAm fraction in copolymer structure increases.