Carbon Nanotubes Decorated with CoP Nanocrystals: A Highly Active Non‐Noble‐Metal Nanohybrid Electrocatalyst for Hydrogen Evolution

The development of effective and inexpensive hydrogen evolution reaction (HER) electrocatalysts for future renewable energy systems is highly desired. The strongly acidic conditions in proton exchange membranes create a need for acid‐stable HER catalysts. A nanohybrid that consists of carbon nanotubes decorated with CoP nanocrystals (CoP/CNT) was prepared by the low‐temperature phosphidation of a Co₃O₄/CNT precursor. As a novel non‐noble‐metal HER catalyst operating in acidic electrolytes, the nanohybrid exhibits an onset overpotential of as low as 40 mV, a Tafel slope of 54 mV dec^?1, an exchange current density of 0.13 mA cm^?2, and a Faradaic efficiency of nearly 100 %. This catalyst maintains its catalytic activity for at least 18 hours and only requires overpotentials of 70 and 122 mV to attain current densities of 2 and 10 mA cm^?2, respectively.     

Phosphorus Vacancies that Boost Electrocatalytic Hydrogen Evolution by Two Orders of Magnitude

Vacancy engineering is an effective strategy to manipulate the electronic structure of electrocatalysts to improve their performance, but few reports focus on phosphorus vacancies (Pv). Herein, the creation of Pv in metal phosphides and investigation of their role in alkaline electrocatalytic hydrogen evolution reaction (HER) is presented. The Pv‐modified catalyst requires a minimum onset potential of 0 mV vs. RHE, a small overpotential of 27.7 mV to achieve 10 mA cm^?2 geometric current density and a Tafel slope of 30.88 mV dec^?1, even outperforms the Pt/C benchmark (32.7 mV@10 mA cm^?2 and 30.90 mV dec^?1). This catalyst also displays superior stability up to 504 hours without any decay. Experimental analysis and density functional theory calculations suggest Pv can weaken the hybridization of Ni 3d and P 2p orbitals, enrich the electron density of Ni and P atoms nearby Pv, and facilitate H* desorption process, contributing to outstanding HER activity and facile kinetics.     

Self‐Supported Cu3P Nanowire Arrays as an Integrated High‐Performance Three‐Dimensional Cathode for Generating Hydrogen from Water

Searching for inexpensive hydrogen evolution reaction (HER) electrocatalysts with high activity has attracted considerable research interest in the past years. Reported herein is the topotactic fabrication of self‐supported Cu₃P nanowire arrays on commercial porous copper foam (Cu₃P NW/CF) from its Cu(OH)₂ NW/CF precursor by a low‐temperature phosphidation reaction. Remarkably, as an integrated three‐dimensional hydrogen‐evolving cathode operating in acidic electrolytes, Cu₃P NW/CF maintains its activity for at least 25 hours and exhibits an onset overpotential of 62 mV, a Tafel slope of 67 mV dec^?1, and a Faradaic efficiency close to 100 %. Catalytic current density can approach 10 mA cm^?2 at an overpotential of 143 mV.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Anion engineering of hierarchical Co-A (A = O,Se, P) hexagrams for efficient electrocatalytic oxygen evolution reaction

Water electrolysis is considered to be an effective and promising technology to make high-purity H₂, however, the relationship between anion species and catalytic performance of electrocatalysts is still not completely clear. Herein, we report an anion engineering strategy to tune electrocatalytic water oxidation activity for Co-based materials. Novel hierarchical Co-based oxide/selenide/phosphide (Co-A, A = O, Se, P) hexagrams have been chosen as model materials. Electrochemical results and theoretical calculations reveal that the electron configuration, the electrical conductivity, and the oxidation potential of Co element in Co-A hexagrams could be moderated by the substitution of P atoms, which leads to the superior OER performance. Particularly, Co-P hexagram displays a low overpotential (η = 269 mV) at j = 10 mA/cm² for the oxygen evolution reaction (OER) compared to Co-O hexagram (η = 399 mV) and Co-Se hexagram (η = 347 mV). This work is of great importance in understanding coordination atoms (O, Se and P) induced electrocatalytic properties of hierarchical Co-based materials.     

Tunable and Specific Formation of C@NiCoP Peapods with Enhanced HER Activity and Lithium Storage Performance

The superior properties of nanomaterials with a special structure can provide prospects for highly efficient water splitting and lithium storage. Herein, we fabricated a series of peapodlike C@Ni_2?xCo_xP (x≤1) nanocomposites by an anion‐exchange pathway. The experimental results indicated that the HER activity of C@Ni_2?xCo_xP catalyst is strongly related to the Co/Ni ratio, and the C@NiCoP got the highest HER activity with low onset potential of ～45 mV, small Tafel slope of ～43 mV dec^?1, large exchange current density of 0.21 mA cm^?2, and high long‐term durability (60 h) in 0.5 m H₂SO₄ solutions. Equally importantly, as an anode electrode for lithium batteries, this peapodlike C@NiCoP nanocomposite gives excellent charge–discharge properties (e.g., specific capacity of 670 mAh g^?1 at 0.2 A g^?1 after 350 cycles, and a reversible capacity of 405 mAh g^?1 at a high current rate of 10 A g^?1). The outstanding performance of C@NiCoP in HER and LIBs could be attributed to the synergistic effect of the rational design of peapodlike nanostructures and the introduction of Co element.     

Ni2P Interlayer and Mn Doping Synergistically Expedite the Hydrogen Evolution Reaction Kinetics of Co2P

Transition metal phosphide is regarded as one of the most promising candidates to replace noble-metal hydrogen evolution reaction (HER) electrocatalysts. Nevertheless, the controllable design and synthesis of transition metal phosphide electrocatalysts with efficient and stable electrochemical performance are still very challenging. Herein, a novel hierarchical HER electrocatalyst consisting of three-dimensional (3D) coral-like Mn-doped Co₂P@an intermediate layer of Ni₂P generated in situ by phosphorization on Ni foam (MnCoP/NiP/NF) is reported. Notably, both the incorporation of Mn and introduction of the Ni₂P interlayer promote Co atoms to carry more electrons, which is beneficial to reduce the force of the Co−H bond and optimize the adsorption energy of hydrogen intermediate (|ΔG_H*|), thereby making MnCoP/NiP/NF exhibit outstanding HER performance with onset overpotential and Tafel slope as low as 31.2 mV and 61 mV dec⁻¹, respectively, in 1 m KOH electrolyte.     

Benchmarking Three Ruthenium Phosphide Phases for Electrocatalysis of the Hydrogen Evolution Reaction: Experimental and Theoretical Insights

The outstanding electrocatalytic activity of ruthenium (Ru) phosphides toward the hydrogen evolution reaction (HER) has received wide attention. However, the effect of the Ru phosphide phase on the HER performance remains unclear. Herein, a two-step method was developed to synthesize nanoparticles of three types of Ru phosphides, namely, Ru₂P, RuP, and RuP₂, with similar morphology, dimensions, loading density, and electrochemical surface area on graphene nanosheets by simply controlling the dosage of phytic acid as P source. Electrochemical tests revealed that Ru₂P/graphene shows the highest intrinsic HER activity, followed by RuP/graphene and RuP₂/graphene. Ru₂P/graphene affords a current density of 10 mA cm⁻² at an overpotential of 18 mV in acid media. Theoretical calculations further showed that P-deficient Ru₂P has a lower free energy of hydrogen adsorption on the surface than other two, P-rich Ru phosphides (RuP, RuP₂), which confirms the excellent intrinsic HER activity of Ru₂P and is consistent with experiment results. The work reveals for the first time a clear trend of HER activity among three Ru phosphide phases.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

Metal-organic framework derived NiCoP hollow polyhedrons electrocatalyst for pH-universal hydrogen evolution reaction

Hollow nanostructures have attracted increasing research interest in hydrogen evolution reaction owing to their unique structural features.Herein,Ni-Co mixed metal phosphide hollow and porous polyhedrons was successfully composited(expressed as NiCoP).Benefiting from the synergistic effects of ZIF-67 by doping Ni elements and the well-defined hollow and porous structure,the as-synthesized NiCoP hollow and porous polyhedrons exhibit better electrochemical properties and mechanical stability for hydrogen evolution reaction over a pH-universal range,with a small Tafel slopes of 72,101,176 mV/dec,and a low overpotential of 82,102,261 mV at a current density of 10 mA/cm² in 0.5 mol/L H₂SO₄,1 mol/L KOH and1 mol/L phosphate buffer solution(PBS).This general strategy can also be applied to fabricate other hollow cobalt-based phosphides and MOFs-derived materials for HER.     

Highly Active Electrocatalysis of the Hydrogen Evolution Reaction by Cobalt Phosphide Nanoparticles

Nanoparticles of cobalt phosphide, CoP, have been prepared and evaluated as electrocatalysts for the hydrogen evolution reaction (HER) under strongly acidic conditions (0.50 M H₂SO₄, pH 0.3). Uniform, multi‐faceted CoP nanoparticles were synthesized by reacting Co nanoparticles with trioctylphosphine. Electrodes comprised of CoP nanoparticles on a Ti support (2 mg cm^?2 mass loading) produced a cathodic current density of 20 mA cm^?2 at an overpotential of ?85 mV. The CoP/Ti electrodes were stable over 24 h of sustained hydrogen production in 0.50 M H₂SO₄. The activity was essentially unchanged after 400 cyclic voltammetric sweeps, suggesting long‐term viability under operating conditions. CoP is therefore amongst the most active, acid‐stable, earth‐abundant HER electrocatalysts reported to date.     

Devisable POM/Ni Foam Composite: Precisely Control Synthesis toward Enhanced Hydrogen Evolution Reaction at High pH

Polyoxometalates (POMs) are promising catalysts for the electrochemical hydrogen production from water owing to their high intrinsic catalytic activity and chemical tunability. However, poor electrical conductivity and easy detachment of the POMs from the electrode cause significant challenges under operating condition. Herein, a simple one-step hydrothermal method is reported to synthesize a series of Dexter–Silverton POM/Ni foam composites (denoted as Ni M -POM/Ni; M =Co, Zn, Mn), in which the stable linkage between the POM catalysts and the Ni foam electrodes lead to high activity for the hydrogen evolution reaction (HER). Among them, the highest HER performance can be observed in the NiCo-POM/Ni, featuring an overpotential of 64 mV (at 10 mA cm⁻², vs. reversible hydrogen electrode), and a Tafel slope of 75 mV dec⁻¹ in 1.0 m aqueous KOH. Moreover, the NiCo-POM/Ni catalyst showed a high faradaic efficiency ≈97 % for HER. Post-catalytic of NiCo-POM/Ni analyses showed virtually no mechanical or chemical degradation. The findings propose a facile and inexpensive method to design stable and effective POM-based catalysts for HER in alkaline water electrolysis.     

Ultrafine Molybdenum Carbide Nanoparticles Composited with Carbon as a Highly Active Hydrogen‐Evolution Electrocatalyst

The replacement of platinum with non‐precious‐metal electrocatalysts with high efficiency and superior stability for the hydrogen‐evolution reaction (HER) remains a great challenge. Herein, we report the one‐step synthesis of uniform, ultrafine molybdenum carbide (Mo₂C) nanoparticles (NPs) within a carbon matrix from inexpensive starting materials (dicyanamide and ammonium molybdate). The optimized catalyst consisting of Mo₂C NPs with sizes lower than 3 nm encapsulated by ultrathin graphene shells (ca. 1–3 layers) showed superior HER activity in acidic media, with a very low onset potential of ?6 mV, a small Tafel slope of 41 mV dec^?1, and a large exchange current density of 0.179 mA cm^?2, as well as good stability during operation for 12 h. These excellent properties are similar to those of state‐of‐the‐art 20 % Pt/C and make the catalyst one of the most active acid‐stable electrocatalysts ever reported for HER.     

Unexpected Correlation Between Boron Chain Condensation and Hydrogen Evolution Reaction (HER) Activity in Highly Active Vanadium Borides: Enabling Predictions

Transition‐metal borides (TMBs) have recently attracted attention as excellent hydrogen evolution (HER) electrocatalysts in bulk crystalline materials. Herein, we show for the first time that VB and V₃B₄ have high electrocatalytic HER activity. Furthermore, we show that the HER activity (in 0.5 m H₂SO₄) increases with increasing boron chain condensation in vanadium borides: Using a ?23 mV overpotential decrement derived from ?0.296 mV (for VB at ?10 mA cm^?2 current density) and ?0.273 mV (for V₃B₄) we accurately predict the overpotential of VB₂ (?0.204 mV) as well as that of unstudied V₂B₃ (?0.250 mV) and hypothetical “V₅B₈” (?0.227 mV). We then derived an exponential equation that predicts the overpotentials of known and hypothetical V_xB_y phases containing at least a boron chain. These results provide a direct correlation between crystal structure and HER activity, thus paving the way for the design of even better electrocatalytic materials through structure–activity relationships.     

Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

Tweaking Nickel with Minimal Silver in a Heterogeneous Alloy of Decahedral Geometry to Deliver Platinum‐like Hydrogen Evolution Activity

Five‐fold intertwined Ag_xNi_1?x (x=0.01–0.25) heterogeneous alloy nanocrystal (NC) catalysts, prepared through unique reagent combinations, are presented. With only ca. 5 at % Ag (AgNi‐5), Pt‐like activity has been achieved at pH 14. To reach a current density of 10 mA cm^?2 the extremely stable AgNi‐5 requires an overpotential of 24.0±1.2 mV as compared to 20.1±0.8 mV for 20 % Pt/C, both with equal catalyst loading of 1.32 mg cm^?2. The turnover frequency (TOF) is as high as 2.1 H₂ s^?1 at 50 mV (vs. RHE). Site‐specific elemental analyses show the Ag:Ni compositional variation, where the apex and edges of the decahedra are Ag‐rich, thereby exposing Ni onto the faces to achieve maximum charge transport for an exceptional pH universal HER activity. DFT calculations elucidate the relative H‐atom adsorption capability of the Ni centers as a function of their proximity to Ag atom.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Self‐Supported FeP‐CoMoP Hierarchical Nanostructures for Efficient Hydrogen Evolution

Fabricating highly efficient electrocatalysts for electrochemical hydrogen generation is a top priority to relief the global energy crisis and environmental contamination. Herein, a rational synthetic strategy is developed for constructing well‐defined FeP?CoMoP hierarchical nanostructures (HNSs). In general terms, the self‐supported Co nanorods (NRs) are grown on conductive carbon cloth and directly serve as a self‐sacrificing template. After solvothermal treatment, Co NRs are converted into well‐ordered Co?Mo nanotubes (NTs). Subsequently, the small‐sized Fe oxyhydroxide nanorods arrays are hydrothermally grown on the surface of Co?Mo NTs to form Fe?Co?Mo HNSs, which are then converted into FeP?CoMoP HNSs through a facile phosphorization treatment. FeP?CoMoP HNSs display high activity for hydrogen evolution reaction (HER) with an ultralow cathodic overpotential of 33 mV at 10 mA cm^?2 and a Tafel slope of 51 mV dec^?1. Moreover, FeP?CoMoP HNSs also possess an excellent electrochemical durability in alkaline media. First‐principles density functional theory (DFT) calculations demonstrate that the remarkable HER activitiy of FeP?CoMoP HNSs originates from the synergistic effect between FeP and CoMoP.     

Enhancing the Hydrogen Evolution Reaction Activity of Platinum Electrodes in Alkaline Media Using Nickel–Iron Clusters

Herein, we demonstrate an easy way to improve the hydrogen evolution reaction (HER) activity of Pt electrodes in alkaline media by introducing Ni–Fe clusters. As a result, the overpotential needed to achieve a current density of 10 mA cm^?2 in H₂‐saturated 0.1 m KOH is reduced for the model single‐crystal electrodes down to about 70 mV. To our knowledge, these modified electrodes outperform any other reported electrocatalysts tested under similar conditions. Moreover, the influence of 1) Ni to Fe ratio, 2) cluster coverage, and 3) the nature of the alkali‐metal cations present in the electrolyte on the HER activity has been investigated. The observed catalytic performance likely originates from both the improved water dissociation at the Ni–Fe clusters and the subsequent optimal hydrogen adsorption and recombination at Pt atoms present at the Ni–Fe/Pt boundary.