EMI shielding and microwave absorption behavior of Au‐MWCNT/polyaniline nanocomposites

Electrically conducting Au‐multiwalled carbon nanotube/polyaniline (Au‐MWCNT/PANi) nanocomposites were synthesized by two different ways: (1) by direct mixing of MWCNT/PANi and Au nanoparticles (Au‐MWCNT/PANi‐1) and (2) by in situ polymerization of aniline in the presence of both MWCNTs and Au nanoparticles (Au‐MWCNT/PANi‐2). The higher electrical conductivity of Au‐MWCNT/PANi‐2 compared with the other samples (PANi, MWCNT/PANi, Au‐MWCNT/PANi‐1) is supported by the red shifts of the UV‐vis bands (polaron/bipolaron), the high value of the –NH+= stretch peak (Fourier transform infrared spectroscopy studies), the high % crystallinity (X‐ray diffraction analysis) and more uniform dispersion of the Au NPs in the material. The performance of the samples in electromagnetic interference (EMI) shielding and microwave absorption was studied in the X‐band (8–12 GHz). For all the samples, absorption was the dominant factor contributing toward the EMI shielding. Au‐MWCNT/PANi‐2 showed the best performance with a total shielding effectiveness of ?16 dB [averaged over the X‐band (GHz)] and a minimum reflection loss of ?56.5 dB. The higher dielectric properties resulting from the heterogeneities because of the presence of nanofillers and the high electrical conductivity lead to the increased EMI shielding and microwave absorption. The results show the significance of both Au nanoparticles and method of synthesis on the EMI shielding performance of MWCNT/PANi composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Strengthening of liquid crystalline polymer by functionalized carbon nanotubes through interfacial interaction and homogeneous dispersion

Multiwalled carbon nanotubes (MWCNTs) were functionalized with two types of chemical moieties (i.e. carboxylic, ? COOH and hydroxyl benzoic acid groups, ‐HBA) on their sidewalls in order to improve their interaction with a liquid crystalline polymer (LCP) and dispersion in LCP. We have investigated the rheological, mechanical, dynamic mechanical, and thermal properties in detail with variation of HBA‐functionalized MWCNTs in the LCP matrix. Effect of the dispersion state of the functionalized MWCNTs in the LCP matrix on the rheological behavior was also studied. The composites containing HBA‐functionalized MWCNTs showed higher complex viscosity, storage, and loss modulus than the composites with the same loading of raw MWCNTs and MWCNT‐COOH. It was suggested that the HBA‐functionalized MWCNTs exhibited a better dispersion in the polymer matrix and formed stronger CNT‐polymer interaction in the composites than the raw MWCNTs and MWCNT‐COOH, which was also confirmed by FESEM and FTIR studies. As a result, the overall mechanical performance of the HBA‐MWCNT‐LCP composites could be improved significantly. For example, the addition of 4 wt% HBA‐MWCNT to LCP resulted in the considerable improvements in the tensile strength and modulus of LCP (by 66 and 90%, respectively). Copyright © 2010 John Wiley & Sons, Ltd.     

Multiwalled carbon nanotubes reinforced poly (ether‐ketone) nanocomposites: Assessment of rheological,mechanical, and electromagnetic shielding properties

This study investigates the effect of multiwalled carbon nanotubes (MWCNTs) content on rheological, mechanical, and EMI shielding properties in Ka band (26.5‐40 GHz) of poly (ether‐ketone) [PEK] prepared by melt compounding using twin screw extruder. Transmission electron microscopy (TEM) and field emission gun scanning electron microscopy (FEG‐SEM) studies were adopted to identify dispersion of nanotubes in PEK matrix. TEM and SEM images showed uniform dispersion of MWCNTs in PEK/MWCNT composites even at loading of 5 wt%. The rheological studies showed that the material experiences viscous (fluid) to elastic (solid) transition at 1 wt% loading beyond which nanotubes form continuous network throughout the matrix which in turn promotes reinforcement. Additionally, Van‐Gurp Palmen plot (phase angle vs complex modulus) and values of damping factor further confirm that the material undergoes viscous to elastic transition at 1 wt% loading. This reinforcement effect of nanotubes is reflected in enhanced mechanical properties (flexural strength and flexural modulus). Flexural strength and flexural modulus of PEK showed an increment of 17% upon incorporation of 5 wt% of MWCNTs. Total shielding effectiveness (SE_T) of −38 dB with very high shielding effectiveness due to absorption (SE_A ~ −34 dB) was observed at 5 wt% loading of MWCNTs in PEK matrix in the frequency range of 26.5‐40 GHz (Ka band).     

Ku-band EMI shielding effectiveness and dielectric properties of Polyaniline-Y2O3 composites

Electromagnetic interference (EMI) shielding has become a phenomenon of great concern and there is growing demand towards the synthesis of materials with better EMI shielding effectiveness (EMI SE). This work highlights the preparation of Polyaniline-Yttrium Oxide (PANI-Y₂O₃) composites for EMI shielding applications in the frequency range from 12.4 to 18 GHz (Ku-band). The structure and morphology of the composites were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). EMI SE, microwave absorption and reflection, dielectric properties of the composites are discussed in detail. All the computations were based on microwave scattering parameters measured by transmission line waveguide technique. The observed results show absorption dominant EMI shielding in these composites with EMI SE of ?19 to ?20 dB, which mainly depends on the dielectric loss of the composites. Through the results of our observations, we propose these composites to be potential materials for microwave absorption and EMI shielding applications.     

Synergistic effect of double percolated co‐supportive MWCNT‐CB conductive network for high‐performance EMI shielding application

The recent development in telecommunication technology has led electromagnetic interference (EMI) to a serious threat to both electronic devices and living beings. In this work, we designed a highly efficient EMI shielding material by taking advantage of both carbonaceous hybrid filler and double percolation phenomenon. Here, a flexible, lightweight microwave absorbing conductive polymer composite was fabricated by employing poly (ethylene‐co‐methyl acrylate) and ethylene octene copolymer (EMA/EOC) binary blend as the matrix and multiwall carbon nanotube carbon black (MWCNT/CB) hybrid filler as the conductive moiety. We investigated the effect of MWCNT content in the hybrid composite on mechanical, thermomechanical, electrical, and shielding efficiency. A total EMI shielding efficiency of ?37.4 dB in the X band region was attained with 20 wt% hybrid filler containing 50 wt% MWCNT along with promising mechanical properties.     

EMI shielding and dynamic mechanical analysis of graphene oxide-carbon nanotube-acrylonitrile butadiene styrene hybrid composites

Carbon nanomaterials such as carbon nanotubes (CNTs), graphene and their hybrid have been studied extensively. Despite having excellent properties of CNTs and graphene have not yet been fully realized in the polymer composites. During fabrication agglomeration of CNTs and restacking of graphene is a serious concern that results in the degradation of properties of nanomaterials into the final composites. To improve the dispersion of CNTs and restacking graphene, in the present research work, we focused on the hybridization of graphene oxide and CNTs. Multiwalled carbon nanotubes (MWCNTs), functionalized carbon nanotubes (FCNTs), and graphene oxide-carbon nanotubes (GCNTs) reinforced acrylonitrile butadiene styrene (ABS) composites were prepared separately by vacuum filtration followed by hot compression molding. Further, dynamic mechanical analysis (DMA), and electromagnetic interference (EMI) shielding properties of ABS composites reinforced carbon nanofillers were investigated. The dynamic mechanical properties of polymers strongly depend on the adhesion of fillers and polymer, entanglement density of polymer chains in the presence of carbon fillers. The dynamic mechanical characteristics such as storage, loss modulus, and damping factor of prepared composites were significantly affected by the incorporation of MWCNTs, FCNTs, and GCNTs. Maximum EMI shielding effectiveness of −49.6 dB was achieved for GCNT-ABS composites which were highest compared to MWCNTs-ABS composites (−38.6 dB) and FCNTs-ABS composites (−36.7 dB) in the Ku band (12.4–18 GHz). These results depict the great potential of GCNTs-ABS composites to be used in various applications of efficient heat dissipative EMI shielding materials for electronic devices.     

ZnO纳米颗粒锚定的亚微米碳纤维的制备及其吸波性能

使用静电纺丝技术结合水热法制备了表面锚定ZnO纳米颗粒的亚微米碳纤维（ZnO/SDCFs）复合物,并详细研究了反应溶液的pH值对复合物的结构、组成、电磁特性和吸波性能的影响。结果显示,随着pH值的升高,ZnO的含量增加,介电常数、介电损耗以及电磁衰减能力均下降,但阻抗匹配程度提高。相比于纯碳纤维,所有ZnO/SDCFs复合物的吸波性能均得到不同程度的加强。其中,pH值等于8时所制备的ZnO/SDCFs-8复合物拥有最好的吸波性能,主要归因于电磁衰减能力和阻抗匹配间的更好平衡。当ZnO/SDCFs-8的填充量仅为2.5%（质量分数）、厚度为1.7 mm时,相应吸波涂层的最小反射损耗达到-44.1 dB,低于-10 dB的有效吸收带宽为6.1 GHz,频率范围为11.9~18 GHz;当厚度为3.0 mm时,有效吸收带宽可提高到11.8 GHz（6.2~18 GHz）。     

Nanocomposite based on epoxy and MWCNTs modified with NiFe2O4 nanoparticles as efficient microwave absorbing material

In order to make a microwave absorbent material with good dielectric and magnetic properties, well dispersed microwave absorbing hybrid epoxy polymer composites containing nickel doped Fe₃O₄ nanocrystals coated on carbon nanotubes (NiFe₂O₄‐MWCNTs/epoxy) were synthesized by the combined precipitation‐hydrothermal method in 1‐30 wt.% of nanoparticles. Nickel possess well interaction with microwave radiation and represents fine electromagnetic interference (EMI) shielding and by dopping it into ferrite spinel structures, does not show any tendency to oxidation. Well‐dispersed NiFe₂O₄–MWCNTs/epoxy nanocomposite prepared by new in‐situ polymerization method. First, NiFe₂O₄–MWCNT nanoparticles ultrasonicated in acetone and after mixing with epoxy resin ultrasonicated again. Finally, hardner added to the composite and tuned temperature for evaporating solvent. X‐ray diffraction (XRD) and energy dispersive spectroscopy (EDS) confirmed the synthesizing NiFe₂O₄ nanoparticles. Saturation magnetization value of NiFe₂O₄‐MWCNTs is about 29 emu/g with very low remanence and coercivity content, which revealed that the NiFe₂O₄‐MWCNTs is ferromagnetic nanocrystal. Transmission electron microscopy (TEM) used to characterize the distribution of NiFe₂O₄ nanocrystals on the surface of MWCNTs. The TEM images show that NiFe₂O₄ nanocrystals have a mean size of 12 nm, and completely coated on the exterior surface of MWCNTs. The obtained results of reflection loss revealed that the maximum values of reflection loss of the NiFe₂O₄‐MWCNTs/epoxy increase by enhancing the content of nanoparticles until 10 wt.% and decreases in 30 wt.%.     

多壁碳纳米管对聚甲醛性能的影响

将多壁碳纳米管(MWCNTs)和聚甲醛(POM)在转矩流变仪中熔融混合得到POM/MWCNT复合材料.研究了复合材料的形态,导热性能,导电性能,流变性能和结晶性能.结果表明,MWCNTs在没有经过处理的情况下能够均匀地分散在POM基体中;当向POM中添加1.0 wt%含量MWCNTs时,复合材料的导热系数上升到0.5289 W/(K m),比纯POM的导热系数0.198 W/(K m)提高1.5倍,通过有效介质方法(EMA)验证了体系导热系数提高幅度不大的原因是MWCNTs与POM之间形成了很高的界面热阻;当MWCNTs的含量为1.0 wt%时,体系产生了导电逾渗效应,逾渗值在0.5 wt%~1.0 wt%之间;MWCNTs对POM有显著的成核作用,当向POM中添加0.5 wt%含量的MWCNTs时,POM的结晶温度提高6℃左右,但当MWCNTs的添加量进一步增加时,结晶温度几乎不再变化,成核效果呈现"饱和"状态.另外,材料的复数黏度,储能模量和损耗模量随MWCNTs含量的增加而增加.     

Achieving full effective microwave absorption in X band by double-layered design of glass fiber epoxy composites containing MWCNTs and Fe3O4 NPs

The glass fiber epoxy composites containing MWCNTs and Fe₃O₄ NPs were manufactured by composites liquid molding process. The microwave absorbing properties of single-layered and double-layered glass fiber/MWCNTs/epoxy and glass fiber/Fe₃O₄ NPs/epoxy composites were evaluated. The reflection loss(RL) were calculated by the measured complex permittivity and permeability using waveguide method by vector network analyzer. Based on the mechanism analysis and deficiency of single-layer absorber, the double-layered composites were fabricated by using matching layer and absorbing layer to enhance the microwave absorption performance, which can be modulated by tailoring the electromagnetic parameters and thicknesses of each layer. The optimized microwave absorbing properties of double-layered composites with minimum RL of −45.7 dB and full X-band effective absorption can be achieved when the total thickness of the matching layer and absorbing layer is 1.8 mm, which can be attributed to synergistic effect of improved impedance matching characteristic and superior microwave attenuation characteristic of the absorbing layer. The combined utilization of dielectric loss and magnetic loss absorbent and their double-layered structure design shows great design flexibility and diversity and can be a promising candidate for designing high performance microwave absorbing materials.     

聚吡咯/Gd-掺杂铜锌铁氧体复合物的制备及电/磁性能

用溶胶-凝胶法和溶液原位聚合法分别制备了Gd-掺杂纳米级Zn_0.6Cu_0.4Fe_2－xGd_xO₄ (x＝0～0.10)铁氧体粉末和聚吡咯/Zn_0.6Cu_0.4Fe_1.96Gd_0.04O₄纳米复合物. 用现代分析技术表征了样品的结构、形貌和电磁性能. 结果表明Gd-掺杂铁氧体的饱和磁化强度随Gd含量的增加而增大; 复合物的电导率和饱和磁化强度与聚吡咯的含量有关, 当聚吡咯的含量从w＝50%增加到w＝80%, 复合物的电导率从0.0139增加到0.0423 S/cm, 而饱和磁化强度则从18.37减小到14.35 emu/g. 在8～18 GHz频段内, 吸收层厚度为2 mm时, PPy在16 GHz附近的反射损耗峰值为－19.68 dB, 有效带宽为6.2 GHz; 而ZCGFO的反射损耗峰值和有效带宽分别为－16.6 dB和5.16 GHz. 和PPy和ZCGFO相比, PPy/ZCGFO复合物有更低的反射损耗和更大的有效带宽, ZCGFO相对含量为20%的PPy/ZCGFO复合物的反射峰值和有效带宽分别达到－20.90 dB和14.05 GHz. 这些结果说明PPy/ZCCFO复合物适合作为电磁波吸收与屏蔽的候选材料.     

Facile synthesis of Fe3O4/reduced graphene oxide/polyvinyl pyrrolidone ternary composites and their enhanced microwave absorbing properties

In this paper, ternary nanocomposites of Fe₃O₄/reduced graphene oxide/polyvinyl pyrrolidone (Fe₃O₄/rGO/PVP) as a novel type of electromagnetic microwave absorbing materials were synthesized by a three-step chemical approach. First, Fe₃O₄ nanospheres were made by solvent thermal method. Successively, the Fe₃O₄ particles were assembled with rGO after having activated by para-aminobenzoic acid. PVP grafting and reduction of GO happened simultaneously in the third step. It is found that the electromagnetic absorption (EA) performance of synthesized ternary composites with suitable PVP amount had been significantly enhanced comparing to Fe₃O₄ and Fe₃O₄/rGO. Merely 15?wt% low loading in paraffin and thin as 2.8?mm can reach effective EA bandwidth (below ?10 Db) of 11.2?GHz, and the highest reflection loss reached ?67?dB at 10.7?GHz. It was demonstrated that these composites show an effective route to novel microwave absorbing material design.     

Preparation, properties and cytotoxicity evaluation of a biodegradable polyester elastomer composite

Multi-walled carbon nanotube (MWCNT)/poly(glycerol–sebacate–citrate) (PGSC) elastomer composite were prepared and their morphologies, compositions, glass transition temperatures, mechanical properties, water absorption, biodegradation and cytotoxicity were investigated. Results showed that the chemical structures of PGSC elastomers were hardly influenced by the MWCNT loadings, and physical adsorption was thought as the main interaction between the MWCNTs and PGSC matrixes. When the MWCNT loading was 3 wt%, MWCNTs displayed a homogenous dispersion in the matrixes, and the composite's strength and modulus respectively reached 4.4 MPa and 9.2 MPa, increasing by 62.96% and 33.33% than that of pure PGSC matrixes. The degradation rates of the composites tended to decrease with the increase of MWCNT loadings in simulated body fluid (SBF) solution. The composites presented no cytotoxicity especially when the MWCNT loadings were above 1 wt%. We expect the composites can be used as degradable bio-coatings and tissue engineering scaffolds in future.     

Effects of diameter and surface area of electrospun nanocomposite fibers on electromagnetic interference shielding

The effects of variation in average diameter and surface area of nanocomposite fibers on electromagnetic interference (EMI) shielding of multi-walled carbon nanotubes (MWCNTs)/polyvinylpyrrolidone (PVP) fibers were investigated in this paper. The EMI shielding effectiveness of electrospun nanocomposite fibers were measured in the X-band frequency range 8.2–12.4 GHz. The electrical conductivity and EMI shielding behaviors of the nanocomposite fibers were reported as function of average diameter and surface area of MWCNTs/PVP nanocomposite fibers. The electrical conductivity measurements demonstrate using thinner nanocomposite fibers results in a lower limit of electrical resistivity, better electrical conductivity performance. The EMI shielding efficiency of thinner nanocomposite fibers increased up to 42 dB. The EMI shielding data for MWCNTs/PVP nanocomposite fibers with various average diameter and surface area showed that absorption was the major shielding mechanism and reflection was the secondary shielding mechanism. It can be related to higher specific surface area of thinner electrospun MWCNTs/PVP nanocomposite fibers that means more surface area for radiative scatter and absorption leading to higher EMI shielding performance.     

Lightweight excellent microwave absorption properties based on sulfur doped graphene

Lightweight and high-efficiency electromagnetic wave (EMW) absorption sulfur doped graphene (S-GS) was fabricated by reducing and doping graphene oxide (GO) using chemical method. The obtained S-GS exhibits an extremely low reflection loss (RL), wide effective absorption frequency bandwidth at a thin coating thickness (d), light weight and low cost. The minimum RL reaches −52.3 dB at 17.5 GHz with a matching thickness of 1.22 mm. More excitedly, the EM absorption properties could be double-adjusted. By changing the amount of dopant and the thickness of S-GS, The minimum RL touches −52.2 dB at 9.4 GHz and −49.3 dB at 8.5 GHz, respectively, even much lower than most kinds of GS based composites which combined with polymers, magnetic nanoparticles and so on. In a word, S-GS can be promised to be an ideal candidate for constructing novel MW absorber with lightweight, strong absorption characteristics, and thin matching thickness.     

Bifunctional Reduced Graphene Oxide/V2O5 Composite Hydrogel: Fabrication,High Performance as Electromagnetic Wave Absorbent and Supercapacitor

Multifunctional graphene hydrogels have attracted great attention aimed at practical applications. Herein, the novel and bifunctional composite hydrogel containing reduced graphene‐oxide nanosheets (RGO) and V₂O₅ nanobelts (RGO/V₂O₅) is successfully prepared for the first time. Surprisingly, tridimensional (3D) RGO/V₂O₅ composite hydrogels cannot only be used as high‐performance electromagnetic (EM) wave absorbents; they also exhibit excellent properties suitable for supercapacitor electrodes. The composites exhibit a maximum absorption of up to ?21.5 dB. In particular, a composite hydrogel showed a bandwidth of 6.63 GHz, corresponding to a reflection loss at ?10 dB, which opens the possibility for the use of 3D graphene with other functional nanomaterials as lightweight and high‐performance EM wave absorption materials. Remarkably, the composite hydrogel is capable of delivering a high specific capacitance of about 320 F g^?1 at a current density of 1.0 A g^?1.     

Characterization and Electrocatalytic Activity of Nanocomposites Consisting of Nanosized Cobalt Tetraaminophenoxy Phthalocyanine,Multi‐walled Carbon Nanotubes and Gold Nanoparticles

Glassy carbon electrodes were modified with composites containing cobalt tetraaminophenoxy phthalocyanine nanoparticles (CoTAPhPc NP ), multi‐walled carbon nanotubes (MWCNT) and gold nanorods (AuNRs). The modified electrodes were studied for their electrocatalytic behavior towards the reduction of hydrogen peroxide. Phthalocyanine nanoparticles significantly improved electron transfer kinetics as compared to phthalocyanines which are not in the nanoparticle form when alone or in the presence of multiwalled carbon nanotubes (MWCNTs). CoTAPhPc NP ‐MWCNT‐GCE proved to be suitable for hydrogen peroxide detection with a catalytic rate constant of 3.45×10³ M^?1 s^?1 and a detection limit of 1.61×10^?7 M. Adsorption Gibbs free energy ΔG^o was found to be ?19.22 kJ mol^?1 for CoTAPhPc NP ‐MWCNT‐GCE.     

Poly(vinyltriethoxysilane) modified MWCNT/polyimide nanocomposites—Preparation,morphological, mechanical,and electrical properties

Multi‐walled carbon nanotube (MWCNT) modified by vinyltriethoxysilane (VTES) via free radical reaction has been prepared (poly (vinyltriethoxysilane) modified MWCNTs, PVTES‐MWCNT). Precursor of polyimide, polyamic acid has been synthesized by reacting 4,4′‐oxydianiline with 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. PVTES‐MWCNT were then mixed with polyamic acid and heated to 300 °C to form CNT/polyimide composite. During the imidization processes, the silanes on CNT surface reacted with each other and may be connected together by covalent bond (Si? O? Si). The PVTES‐MWCNT was analyzed by Fourier transform infrared and X‐ray photoelectron spectroscopy. The PVTES‐MWCNT/polyimide composites were analyzed by CP/MAS solid state ²⁹Si nuclear magnetic resonance (NMR) spectroscopy. Morphological properties of the PVTES‐MWCNT/polyimide composites were investigated by scanning electron microscope and transmission electron microscope. Electrical conductivity increased dramatically comparing to the unmodified MWCNT/polyimide composites. Mechanical properties of nanocomposite were enhanced significantly by PVTES‐MWCNT. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 803–816, 2008     

Investigation of polycarbonate/acrylonitrile butadiene styrene/multiwall carbon nanotube nanocomposites under impact loading

In this study, the effect of polycarbonate (PC)/acrylonitrile butadiene styrene (ABS)‐reinforced multiwall carbon nanotube (MWCNT) nanocomposites under a high‐velocity impact was investigated. PC/ABS (70/30 w/w)/MWCNT nanocomposites containing 1, 2, and 4 wt% were used to manufacture samples for this study. The samples were fabricated in sheet form with 100 × 100 mm dimensions and tested by gas gun for high‐velocity impact tests. The experimental results indicate that the energy absorption, limit velocity, and tensile modulus of the nanocomposite samples increased by approximately 121%, 52%, and 103% for the PC/ABS (70/30 w/w)/2 wt% MWCNT samples respectively. These results were confirmed by a transmission electron microscopy analysis test that was conducted for the state of dispersion of MWCNTs in the nanocomposite samples. The transmission electron microscopy results show that the best morphological structure of carbon nanotube at the interface of PC and ABS is that for the nanocomposite containing 2 wt% MWCNTs, which led to improved interface of the nanocomposites and higher mechanical properties. Copyright © 2016 John Wiley & Sons, Ltd.     

具有隔离结构的聚丙烯/碳纳米管复合材料的制备及电磁屏蔽性能

通过共挤出包覆-热压法制备了具有隔离结构的聚丙烯(PP)/碳纳米管(CNTs)电磁屏蔽复合材料。 其中,CNTs随机分布于PP基体中形成导电相,该导电复合物作为包覆层包敷在纯PP颗粒表面,形成包覆复合粒子,经热压后形成隔离导电网络。 结果表明,所制备的隔离结构复合材料呈现良好的导电性能,可获得较低的导电逾渗值0.28%(体积分数);在CNTs质量分数为5.6%时,该复合材料电磁屏蔽性能达到25.6 dB,同时具有良好的力学性能。 本文结果表明,共挤出包覆-热压法制备隔离结构导电复合材料方法简单可控、绿色环保,对开发高性能电磁屏蔽复合材料具有重要指导意义。