Coupling characteristics between single-core fiber and multicore fiber

A simple method for coupling between a single-core single-mode fiber and a multicore single-mode fiber is proposed and demonstrated. An effective coupling approach is based on a process of standard splicing and tapering between the single-core single-mode fiber and the multicore single-mode fiber.     

基于光子晶体光纤和拉锥式单模光纤的超连续光谱产生的实验研究

本文使用重复频率为250 MHz、脉冲宽度为135 fs、最大功率为2.2 W的锁模掺镱光纤激光作为种子源,利用光子晶体光纤和自制的拉锥式单模光纤两种高非线性光纤研究了超连续光谱的产生特性,通过对比两种光纤的结构、色散等特性,分析了拉曼孤子、色散波及其他非线性效应对产生的超连续谱形状的影响,并均得到了大于一个倍频程的超连续光谱,特别是拉锥式单模光纤产生的超连续光谱,耦合效率达到60%,这为众多研究领域,尤其是光学频率梳的建立提供了实用的超连续光源.     

Tunable comb-filter using thermally expanded core fiber and ytterbium doped fiber and its application to multi-wavelength fiber laser

We constructed a novel tunable comb-filter by splicing a commercial Yb³⁺ doped fiber (YDF) between 2 thermally expanded core (TEC) fibers at their core-expanded ends. This structure forms an all-fiber Mach-Zehnder interferometer due to the interference between the core mode and the cladding modes of the YDF. The interference fringes shifts to the longer wavelength region as the YDF is pumped by a 980 nm laser diode (LD). We then demonstrated application of this newly proposed tunable comb-filter to a SOA-based ring laser and obtained multi-wavelength lasing. The lasing wavelengths can be also tuned by pumping the YDF in the proposed comb-filter.     

色散补偿和色散位移光纤实现光脉冲压缩

根据超短光脉冲在光纤中传输的非线性薛定谔方程，模拟了不同色散参量情况下色散补偿和色散位移光纤对增益开关半导体激光器产生的光脉冲的压缩，给出了光脉冲在经过色散补偿光纤前后的啁啾曲线。结果表明，使用色散参量D分别为-150，-180和-20ps/(nm·km)的色散补偿光纤可以实现其他脉冲压缩方法的压缩效果，最大压缩因子达到6.09，但色散参量越大，所需光纤长度就越短。此外，脉冲经过色散补偿光纤后线性啁啾几乎为零。还利用色散位移光纤对脉冲进行孤子压缩，脉冲宽度由最初的45ps减小到1.23ps。指出采用这2种光纤相结合的方法可以对光脉冲实现高效压缩。     

Experimental demonstration of single-mode fiber coupling using adaptive fiber couplerExperimental demonstration of single-mode fiber coupling using adaptive fiber couplerExperimental demonstration of single-mode fiber coupling using adaptive fiber couplerExperimental demonstration of single-mode fiber coupling using adaptive fiber coupler

Coupling plane wave into a single-mode fiber （SMF） with high and steady coupling efficiency is crucial for fiber- based free-space laser systems, where random angular jitters are the main influencing factors of fiber coupling. In this paper, we verified a new adaptive-optic device named adaptive fiber coupler （AFC） which could compensate angular jitters and improve the SMF coupling efficiency in some degree. Experiments of SMF coupling under the angular jitter situation using AFC have been achieved. Stochastic parallel gradient descent （SPGD） algorithm is employed as the control strategy, of which the iteration rate is 625 Hz. In closed loop, the coupling efficiency keeps above 65% when angular errors are below 80/3tad. The compensation bandwidth is 35 Hz at sine-jitter of 15 ~rad amplitude with average coupling efficiency of above 60%. Also, experiments with simulated turbulence have been studied. The average coupling efficiency increases from 31.97% in open loop to 61.33% in closed loop, and mean square error （MSE） of coupling efficiency drops from 7.43% to 1.75%.     

第六讲物理与光纤通信

文章通过回顾光纤通信发展的历史，分析光纤通信研究的现状，展望光纤通信发展的未来，阐述了光纤通信发展与物理学发展的密切关系，显示出物理学作为自然科学基础，它在光纤通信技术发展中起核心作用．     

利用近红外光谱鉴别纺织用竹纤维和麻纤维

利用近红外光谱技术对竹原纤维、竹粘胶纤维和苎麻纤维进行了快速定性鉴别研究.首先扫描3种纤维的近红外光谱,利用化学计量学分析软件,对谱图进行一阶导数预处理,建立不同纤维的光谱数据库,并分别建立竹原纤维、竹粘胶纤维和苎麻纤维的判别模型.利用判别模型,对未知样品进行判别.结果表明,近红外光谱可以在不破坏样品的情况下,可以快速鉴别竹原纤维、竹粘胶纤维和苎麻纤维.     

Tunable dual-wavelength fiber laser based on a polarization-maintaining fiber Bragg grating and a Hi-Bi fiber optical loop mirror

We demonstrate experimentally the operation of a linear cavity dual-wavelength fiber laser using a polarization maintaining fiber Bragg grating (PM-FBG) as an end mirror that defines two closely spaced laser emission lines. The PM-FBG is also used to tune the laser wavelengths. The total tuning range is ∼8 nm. The laser operates in a stable dual-wavelength mode for an appropriate adjustment of the cavity losses for the generated wavelengths. The high birefringence (Hi-Bi) fiber optical loop mirror (FOLM) is used as a tunable spectral filter to adjust the losses. The FOLM adjustment was performed by the temperature control of the Hi-Bi fiber.     

A global design of an erbium-doped fiber and an erbium-doped fiber amplifier

A global design of an erbium-doped fiber and an open-loop erbium-doped fiber amplifier (EDFA) in a steady-state operation is discussed by applying genetic algorithms. Taking a signal gain and a bandwidth as objective functions, 7 parameters of the EDFA (erbium concentration, core radius, erbium-doped radius, refractive index difference, fiber length, pumping wavelength and signal power) are optimized by solving optical propagation equations, assuming a homogenous two-level active medium and a single-mode propagation. There is evidence to show that the 1480 nm pump utilized in usual EDFAs is not an optimal choice, which should be chosen around 1460 nm. The optimal core radius ranges 0.465–0.548 μm on pumping power 50–200 mW. Under different design objects and with different pumping powers, however, there are different optimal Er-doped concentrations, reflective index differences and fiber lengths. As a single fiber EDFA, 35 dB signal gain or 35 nm bandwidth is obtained with the 7 optimal parameters, 100 mW pumping power and 0.001 mW input signal power.     

Multi-wavelength hybrid gain fiber ring laser based on Raman and erbium-doped fiber

A stable and uniform multi-wavelength fiber laser based on the hybrid gain of a dispersion compensating fiber as the Raman gain medium and an erbium-doped fiber (EDF) is introduced. The gain competition effects in the fiber Raman amplification (FRA) and EDF amplification are analyzed and compared experimentaUy. The FRA gain mechanism can suppress the gain competition effectively and make the present multi-wavelength laser stable at room temperature. The hybrid gain medium can also increase the lasing bandwidth compared with a pure EDF laser, and improve the power conversion efficiency compared with a pure fiber Raman laser.     

高性能1018 nm光纤及激光器实验研究

对光纤预制棒制备过程中沉积的气体流量、管内压强等参数和光纤掺杂组分进行了研究. 研究发现通过共掺其他元素, 可以使掺镱光纤的荧光谱发生移动. 基于此, 制备了有利于1018 nm激光输出的掺镱双包层光纤. 在增益光纤长度为7 m时, 实现了22.8 W的1018 nm激光输出, 光-光效率接近70%, 并且没有观察到明显的自发辐射和饱和现象. 关键词： 光纤激光器 双包层掺镱光纤 1018 nm     

Multiwavelength fiber laser using S-band erbium-doped fiber amplifier and semiconductor optical amplifier

A multiwavelength fiber ring laser that is based on an S-band erbium-doped fiber amplifier (EDFA) and a semiconductor optical amplifier (SOA) is developed. An optical switch is used to switch the multiwavelength fiber laser between S-band and L-band. This fiber laser can stably lase seven wavelengths in the S-band or 28 wavelengths in the L-band. Additionally, the lasing wavelengths with a signal-to-noise ratio of over 33 dB and a wavelength spacing of 100 GHz are demonstrated experimentally. The average powers of the lasing wavelength in the S-band and the L-band are −7.53 and −12.15 dBm, respectively.     

All-optical wavelength converter based on fiber cross-phase modulation and fiber Bragg grating

I present new method of phase modulation to amplitude modulation conversion (PM/AM conversion) that utilizes integrating capabilities of fiber Bragg grating (FBG). I found that the wavelength converter based on fiber cross-phase modulation (XPM) and new method of PM/AM conversion have an order of magnitude higher conversion efficiency then the wavelength converter based on sideband filtration method and up to 6 dB higher conversion efficiency then the converter based on the nonlinear optical loop mirror. Numerical analysis and experimental results are provided for bit rates up to 40 Gb/s.     

Erbium-doped CW and Q-switched fiber ring laser with fiber grating Michelson interferometer

The band-pass characteristic of fiber grating Michelson interferometer is analyzed, which acts as bothband-pass filter and Q-switch. An erbium-doped fiber ring laser based on fiber grating Michelsoninterferometer is implemented for producing single longitudinal mode CW operation with 5 MHz spectrallinewidth and up to 6 mW output power. In Q-switched operation, stable fiber laser output pulses withrepetition rate of 800 Hz, pulse width of 0.6 μs, average power of 1.8 mW and peak power of 3.4 W aredemonstrated. The peak power and average power of the Q-switched pulses are varied with the repetitionrate.     

Fiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure

A refractive index (RI) sensor based on a novel fiber structure that consists of a single-mode-multimode-single-mode (SMS) fiber structure followed by a fiber Bragg grating was demonstrated. The multimode fiber in the SMS structure excites cladding modes within output single-mode fiber (SMF) and recouple the reflected cladding Bragg wavelength to the input SMF core. By measuring the relative Bragg wavelength shift between core and cladding Bragg wavelengths, the RI can be determined. Experimentally we have achieved a maximum sensitivity of 7.33 nm/RIU (RI unit) at RI range from 1.324 to 1.439.     

Interphase formation and fiber matrix adhesion in carbon fiber reinforced epoxy resin: influence of carbon fiber surface chemistry

The chemistry and morphology of the carbon fiber surface are important parameters which govern the properties of the interfacial region and the adhesion between carbon fibers and polymeric matrix in carbon fiber reinforced polymers. In the presented paper the surface chemistry of the fibers is varied while the surface morphology is left unchanged. We analyze chemical functionality and morphology of carbon fiber surfaces showing different degrees of activation, together with the adhesion of these fibers to an epoxy matrix and the width of the interfacial region between fiber and matrix. An increase of the oxygen and nitrogen concentration of the fiber surface, in particular in form of carboxyl functional groups, results in a significant increase of interfacial shear strength. Also the width of the interphase, as determined by scanning force microscopy in nanomechanical mode, depends on the activation degree of the carbon fibers. However, no direct correlation between interphase width, surface chemistry and fiber matrix adhesion is found, suggesting no direct influence of interphase width on adhesion properties.     

Switchable triple-wavelength erbium-doped fiber laser using a single fiber Bragg grating in polarization-maintaining fiber

A stable and narrow wavelength spacing multiwavelength erbium-doped fiber laser is proposed and demonstrated. The laser can produce simultaneous dual- and triple-wavelength lasing oscillations with a narrow wavelength spacing of less than 0.1 nm via using a single fiber Bragg gratings written in polarization-maintaining (PM) fiber. By adjusting polarization controller, the wavelength spacing of dual-wavelength lasing oscillations can be tuned to as small as 0.032 nm. The maximum amplitude variation for every lasing wavelength is less than 0.5 dB. The room-temperature operation principle is based on the polarization hole burning and deeply saturated effect in an ordinary erbium-doped fiber ring laser (EDFRL). The laser has the advantages of simple all-fiber configuration, low cost, high stability and operating at room temperature.     

Three-level neodymium fiber laser incorporating photonic bandgap fiber

We report a neodymium fiber laser incorporating an all-solid photonic bandgap fiber to suppress the four-level laser transition 4F(3/2)-4I(11/2). We demonstrate lasing at 907 nm on the three-level transition 4F(3/2)-4I(9/2) when pumping at 808 nm. The maximum slope efficiency obtained was 32% with a threshold pump power of 70 mW.