等离激元增强的石墨烯光吸收

石墨烯中等离激元具有特殊的光电性质,其和入射光的强烈耦合可以引起光吸收的增强.本文基于时域有限差分法和多体自洽场理论研究了等离激元对处于光学谐振腔中的石墨烯光吸收的影响.由于石墨烯中等离激元与入射光动量和能量不匹配而不能直接相互作用,因此石墨烯上施加了金属光栅结构.研究发现光栅结构能够对入射光进行动量补偿并且能够引起其下石墨烯中的电场强度产生很大程度增强,从而导致在该石墨烯结构中太赫兹等离激元和入射光发生强烈耦合而产生太赫兹等离极化激元,同时引起石墨烯光吸收的增强.希望本文能够加深对石墨烯光电特性的理解以及可以为基于石墨烯的太赫兹光电装置提供一定的理论依据.     

太赫兹波段电磁超材料吸波器折射率传感特性

太赫兹超材料吸波器作为一类重要的超材料功能器件,除了可以实现对入射太赫兹波的完美吸收外,还可以作为折射率传感器实现对周围环境信息变化的捕捉与监测.通常从优化表面金属谐振单元结构和改变介质层材料和形态两个方面出发,改善太赫兹超材料吸波器的传感特性.为深入研究中间介质层对太赫兹超材料吸波器传感特性的影响,本文基于金属开口谐振环阵列设计实现了具有连续介质层、非连续介质层和微腔结构的3款太赫兹超材料吸波器,并对其传感特性与传感机理进行了深入研究.结果表明,为了提高太赫兹超材料吸波器的折射率灵敏度、最大探测范围等传感特性,除了可以选用相对介电常数较小的材料作为中间介质层外,还可以改变中间介质层的形态,进而减小中间介质层对谐振场的束缚,增强谐振场与被测分析物之间的耦合.与传统的具有连续介质层的太赫兹超材料吸波器相比,具有非连续介质层和微腔结构的超材料吸波器具有更优越的传感特性,可应用于对待测分析物的高灵敏度、快速检测,在未来的传感领域具有更加广阔的应用前景.     

Tunable electromagnetically induced transparency at terahertz frequencies in coupled graphene metamaterial

A graphene-based metamaterial with tunable electromagnetically induced transparency(EIT)-like transmission is numerically studied in this paper. The proposed structure consists of a graphene layer composed of coupled cut-wire pairs printed on a substrate. The simulation confirms that an EIT-like transparency window can be observed due to indirect coupling in a terahertz frequency range. More importantly, the peak frequency of the transmission window can be dynamically controlled over a broad frequency range by varying the Fermi energy levels of the graphene layer through controlling the electrostatic gating. The proposed metamaterial structure offers an additional opportunity to design novel applications such as switches or modulators.     

石墨烯等离激元的光学性质及其应用前景

石墨烯等离激元由于其独特的电学可调性、本征低衰减以及局域光场高度增强等特性, 引起了广泛的关注并迅速成长为一门新的学科分支--石墨烯表面等离激元光子学. 本文介绍了石墨烯等离激元的一些基本性质, 包括色散关系、局域的等离激元和传导的等离激元以及石墨烯等离激元对其周边介电环境的敏感性等. 在此基础上, 进一步介绍了石墨烯等离激元在太赫兹到中红外频段的应用, 比如有源光调制器的一些功能器件和增强的红外光谱探测等.     

等离子体辅助平板波导的传输特性及应用研究

如何灵活地控制和操纵太赫波是目前研究的热点. 根据电磁波传输理论, 导出了等离子体辅助平板波导的场分布和色散关系表达式, 计算了其传输特性, 并通过全波仿真进行了证实. 结果表明, 等离子体辅助平板波导具有带阻特性, 上边带截止频率等于等离子体频率, 等离子体层越薄, 下边带截止频率越高, 带宽越窄; 阻带内存在两种不同的物理机理, 一种与等离子体和中间媒质的谐振耦合有关, 另一种与表面波的形成有关. 此外, 本文还研究了等离子体频率及碰撞频率对传输特性的影响, 提出了通过改变等离子体频率调谐平板波导滤波器特性的方法. 同时, 采用褶皱金属结构实现了等离子体层, 设计了平板波导传感模型, 通过改变凹槽内的材料的介电常数仿真了其传感特性, 结果表明当材料的介电常数变化0.1%时, 平均截止频率变化1.8 GHz; 通过检测截止频率的变化, 传感器能明显分辨氮、汽油、液态石蜡、甘油和水, 证实了其优良的太赫传感特性. 这项工作对研究太赫波的传输及太赫器件的设计和制备具有指导意义.     

Ultra-compact terahertz switch with graphene ring resonators

We propose and numerically demonstrate a compact terahertz wave switch which is composed of two graphene waveguides and three graphene ring resonators. Changing the bias voltage of the Fermi level in the center graphene ring, the resonant mode can be tuned when the plasmon waves in the waveguides and rings are coupled. We theoretically explain their mechanisms as being due to bias voltage change induced carrier density of graphene modification and the coupling coefficients of graphene plasmon effect after carrier density change, respectively. The mechanism of such a terahertz wave switch is further theoretically analyzed and numerically investigated with the aid of the finite element method. With an appropriate design, the proposed device offers the opportunity to ‘tune' the terahertz wave ON–OFF with an ultra-fast, high extinction ratio and compact size. This structure has the potential applications in terahertz wave integrated circuits.     

Dual-function terahertz metasurface based on vanadium dioxide and graphene

A dual-function terahertz metasurface based on VO₂ and graphene is proposed in this paper. It consists of a gold layer embedded with VO₂ patches, a SiO₂ spacer layer, a VO₂ layer, graphene and a SiO₂ spacer substrate. When the bottom VO₂ layer is in the metallic state, the designed metasurface can achieve absorption. When the top VO₂ patches are in the metallic state, the proposed metasurface can be used as a single-band absorber with terahertz absorptance of 99.7% at 0.736 THz. When the top VO₂ patches are in the insulating state, the designed structure behaves as a dual-band absorber with an absorptance of 98.9% at 0.894 THz and 99.9% at 1.408 THz. In addition, the absorber is polarization insensitive and keeps good performance at large angles of incidence. When the bottom VO₂ is in an insulating state, the metasurface shows electromagnetically induced transparency. The transparent window can be dynamically regulated by controlling the chemical potential of graphene. The proposed metasurface exhibits the advantages of terahertz absorption, electromagnetically induced transparency and dynamic control, which provides more options for the design of terahertz devices in the future.     

基于石墨烯编码超构材料的太赫兹波束多功能动态调控

提出了一种基于石墨烯带的太赫兹波段的1 bit编码超构材料,可以实现太赫兹波束的数目、频率、幅度等参数多功能动态调控.该结构由金属薄膜、聚酰亚胺、硅、二氧化硅、石墨烯带组成.通过对石墨烯带施加两种不同的电压,可以实现一定频率范围内相位差接近180?的"0"和"1"数字编码单元,进而构成1 bit动态可控的编码超构材料.全波仿真结果表明,不同序列的编码超构材料能够实现波束数目从单波束、双波束、多波束到宽波束的调控.相同序列的编码超构材料,通过施加石墨烯带的不同电压能够实现宽频段波束频率的偏移.对于000000或者111111周期序列的编码超构材料,通过施加石墨烯带的不同电压还能够实现波束幅度的调控.因此这种基于石墨烯带的编码超构材料为灵活调控太赫兹波提供了一种新的途径,将在雷达隐身、成像、宽带通信等方面具有重要的意义.     

Interaction of terahertz electromagnetic waves with periodic gratings of graphene micro- and nanoribbons

An original mathematical model of the interaction of terahertz (THz) electromagnetic waves with periodic gratings of graphene micro- and nanoribbons is based on the solution to the boundary-value problem of diffraction for the Maxwell equations with electrodynamic boundary conditions and material equations. The electrodynamic calculations of the transmission coefficients of the TEM wave versus frequency are performed for the 2D grating of graphene micro- and nanoribbons at several chemical potentials, grating periods, and geometrical sizes of ribbons. The results of the calculations show that the transmission spectrum exhibits a minimum in the THz range if the electric field of the wave is perpendicular to the graphene ribbons. The minimum is due to the plasmon resonance of the fundamental mode in graphene, and the absorption peaks at higher frequencies in the upper part of the THz range are related to the highorder plasmon modes.     

Analysis and design of concave lens with metallic slit array for terahertz wave band

This paper presents a three-dimensional concave lens constructed from a metallic slit array. The effective refractive index is estimated to be $0<n<1$ . The actual lens requires spacers in the slits. A lens using a low loss dielectric material for the terahertz frequency band is designed. The fast wave effect is enhanced in order to mitigate the slow wave effect of the dielectric material. Full wave analysis results are obtained by ANSYS HFSS and the focusing effect of the three-dimensional concave lens is confirmed in the terahertz frequency band.     

基于太赫兹超材料的微流体折射率传感器

太赫兹生物医学是目前光谱研究领域的热点,其主要难点在于如何有效避免水分的干扰,进行液相环境下样本的灵敏分析与检测。超材料太赫兹传感器由于具有高灵敏、快速检测、痕量分析等优势,而成为太赫兹生物医学传感领域的重要研究方法。设计加工了一种基于单开口谐振环超材料的太赫兹液相传感芯片,为了有效克服水对太赫兹波的强烈吸收,利用微纳加工技术刻蚀深度为50 μm的流体通道。传感芯片整合了超材料基底与PDMS流道,在THz频段有两个位于0.771和2.129 THz的谐振峰。以水、无水乙醇作为常见化学溶剂进行传感实验,相对于空白传感器本身的THz时域谱而言,液体的加入导致时域峰的相位延迟和幅度减小。同时,由于水的折射率大于乙醇,THz透射频谱结果显示为水的频移改变量大于乙醇,且峰2大于等于峰1。上述结果表明,构建的超材料液相传感芯片是一个灵敏的折射率传感器,也证明了该传感器在测量液态样品方面的可行性。此外,利用该芯片研究了不同浓度的PBS溶液,发现水溶液中加入离子会导致谐振频率红移（以水为参考）,随着离子浓度增加,谐振频率改变量依次增加,10X PBS红移量最大,峰1为22.9 GHz,峰2为30.5 GHz。比较两个谐振峰的传感性能,峰2的传感能力更好,但是峰1对低浓度的离子溶液更加敏感。因此,构建的微流体传感器及检测体系作为一个灵敏的折射率传感器,可开发一个灵敏的无标记THz传感平台,为太赫兹生物医学研究提供新思路。     

Resonant terahertz transmission in subwavelength metallic hole arrays of sub-skin-depth thickness

We study surface-plasmon-enhanced terahertz transmission through subwavelength metallic hole arrays of sub-skin-depth thickness. Dynamic evolution of surface-plasmon resonance in terms of array thickness is characterized by use of terahertz time-domain spectroscopy in the frequency range 0.1-4.5 THz. A critical thickness of lead array film is observed, above which surface-plasmon coupling of terahertz pulses begins and is enhanced rapidly as the array thickness is increased toward the skin depth. The experimental results indicate that high-efficiency extraordinary terahertz transmission can be achieved at an array thickness of only one third of skin depth.     

基于石墨烯和二氧化钒的太赫兹宽带可调谐超材料吸收器

太赫兹超材料吸收器作为一种重要的太赫兹功能器件,被广泛应用于生物医学传感、电磁隐身、军用雷达等多个领域.但这种传统的超材料吸收器结构具有可调谐性差、功能单一、性能指标不足等缺点,已经无法满足复杂多变的电磁环境的要求,因此可调谐超材料吸收器逐渐成为了太赫兹功能器件领域的研究热点.为实现超材料吸收器吸收特性的调谐,通常从调...     

A tunable dual-band THz absorber based on graphene sheet and ribbons

A tunable terahertz dual band absorber consisted of graphene ribbon arrays and a graphene sheet with near-unity absorption is proposed and studied in this letter. With the coupling enhancement of graphene ribbon and graphene sheet, a perfect dual band absorber with absorption over 99% at 3.67 THz and 5.88 THz is achieved. Moreover, the principal of the coupling enhancement is analyzed. By optimizing the parameters of the structure, not only the absorption can be enhanced, but also the center of absorbing frequency could be shifted. Another approach to adjust the absorber–tuning the chemical potential of graphene which is more convenient and timely is investigated. Furthermore, the sensing of the refractive index is emulated by changing the refractive index of the medium on the top. Results show a broad application prospect of the absorber proposed in this paper.     

Multi-frequency switch and excellent slow light based on tunable triple plasmon-induced transparency in bilayer graphene metamaterial∗

We propose a novel bilayer graphene terahertz metamaterial composed of double graphene ribbons and double graphene rings to excite a dynamically adjustable triple plasma-induced transparency (PIT) effect. The coupled mode theory (CMT) is used to explain the PIT phenomenon, and the results of the CMT and the finite-difference time-domain simulation show high matching degree. By adjusting the Fermi levels of graphene, we have realized a penta-frequency asynchronous optical switch. The performance of this switch, which is mainly manifested in the maximum modulation depth (MD = 99.97%) and the minimum insertion loss (IL = 0.33 dB), is excellent. In addition, we have studied the slow-light effect of this triple-PIT and found that when the Fermi level of graphene reaches 1.2 eV, the time delay can reach 0.848 ps. Therefore, this metamaterial provides a foundation for the research of multi-frequency optical switches and excellent slow-light devices in the terahertz band.     

基于石墨烯超表面的宽带电磁诱导透明研究

提出了一种新的基于石墨烯超表面的复合结构,该结构由带有空气槽的石墨烯条、氮化镓、二氧化硅和二氧化钛组成.通过时域有限差分法研究了该结构的电磁特性,研究结果表明,该结构具有更宽频带的电磁诱导透明特性.从结构参数、电磁场分布等方面研究了电磁诱导透明的物理机理.在该结构中,石墨烯条作为明模存在,耦合作为暗模的空气槽和氮化镓侧板,即存在两种明暗模耦合的现象,因此产生宽带的电磁诱导透明现象.从研究结果发现该结构可以产生多个频点的慢光效应和传感效应,因此在光存储、红外波段的传感器设计中具有一定的指导意义和潜在的应用.     

缩比模型的宽频时域太赫兹雷达散射截面(RCS)研究

本文首次以钛宝石飞秒激光振荡级为抽运源,搭建了国内首套宽频时域太赫兹雷达(带宽0.1—1.3 THz)并进行了基于标准球的系统校正验证.利用该雷达测量了太赫兹波段三种缩比模型的散射时域信号.通过改进后的后向投影算法对模型的轮廓外形进行了成像研究,验证了新型时域散射信号成像机理.太赫兹雷达更高的频率,宽谱的特征和高分辨率成像的能力有望用于隐形外形设计过程,成为新兴的太赫兹散射特征研究平台.     

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertz ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies.     

Scattering of Circularly Polarized Terahertz Waves on a Graphene Nanoantenna

We present a surface current method to model the graphene rectangular nanoantenna scattering in the terahertz band with Comsol.Compared with the equivalent thin slab method,the results obtained by the surface current method are more accurate and efficient.Then the electromagnetic scattering of circularly polarized terahertz waves on graphene nanoantennas is numerically analyzed by utilizing the surface current method.The dependences of the antenna resonant frequency with the circularly polarized wave on width and length are consistent with those for the linear polarized waves.These results are proved to be useful to design efficient nanoantennas in terahertz wireless communications.     

光栅-液晶复合结构太赫兹移相器

随着太赫兹技术及其应用的快速发展,各类太赫兹控制器件需求也随之增加,作为太赫兹系统重要器件之一,太赫兹波移相器成为当前研究热点。已有移相器存在着尺寸较大、结构复杂、相移量较小等问题,为克服上述缺陷,提出一种光栅-液晶复合结构太赫兹移相器,该器件结构为石英、石墨烯、液晶盒、光栅结构、石墨烯和石英组成。通过改变石墨烯电极上电压,使液晶折射率发生改变,相移器的相位因折射率改变而发生变化,通过控制外加电压可以实现对太赫兹波相移量有效调控。计算结果表明,该移相器在0.39~0.46 THz频率范围内实现了400°相移量,回波损耗小于-11 dB,在频率0.43 THz处,最大相移量达到422°。太赫兹波入射角在0°~30°范围内变化,移相器的相移量保持不变,而且该器件对入射太赫兹波偏振态不敏感。所设计的太赫兹移相器具有相移量大、结构尺寸小等优点,在未来的太赫兹通信、安检、医疗、传感、成像等领域中具有广阔的应用前景。