The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

电子散斑干涉条纹信号实时处理系统的研究

本文给出一种电子散斑干涉条纹信号实时处理系统的实现方案;详细分析了物体变形前后信号延迟对相关性的影响;并导出条纹信号频率范围与离面位移的关系式及散斑背景噪音最低频率估算式,从获取低背景噪音条纹图角度给出光学系统优化设计的依据;最后给出实验结果．     

基于物体像的干涉条纹图像中散斑噪声的识别方法

散斑噪声是激光干涉时的普遍现象,其覆盖被测表面对应区域的形状信息,造成测量误差。针对斜入式激光干涉测量中散斑噪声的特点,提出一种基于物体像的散斑噪声的识别方法。该方法通过统计物体像中有效测量区域和背景区域内灰度分布的特点,自动计算出判定散斑噪声的上下阈值。基于物体像与干涉条纹图像间微米级的映射关系,得到干涉条纹图像中散斑噪声的位置。设计了相关实验,对干涉条纹图像中识别出的散斑噪声区域进行修补,消除了包裹相位图中一个条纹周期内相邻像素点间大于π的相位突变。     

A new formula for fringe localization in holographic interferometry

Holographic interferometry generally involves the interference of two or more speckle fields reflected from or transmitted through a diffused object. The visibility of the resulting fringes depends on the degree of coherence of the interfering speckle fields. Through a statistical analysis it is found that the degree of coherence of speckle fields is essentially a function of the relative speckle displacement and average speckle size. The analysis leads to a new physical model for holographic interferometry. With this model the problem of fringe formation and localization may be analyzed and formulated in terms of speckle movement. A new formula for ideal fringe localization is then derived from the analysis. Furthermore, a localization factor V_c, i.e. the visibility of the holographic fringes, is introduced to analyze the partial fringe localization in holographic interferometry, which is of practical interest to most researchers.     

Application of improved Speckle contouring technique to surface roughness measurements

One of the well known drawbacks in Electronic Speckle Pattern Interferometry (ESPI) is the poor fringe density due to electronic and speckle noise and decreasing fringe visibility with increasing speckle decorrelation. As recently reported we suggested improving the fringe density and enlarging the measurement range by the incremental addition of phase images. The technique has already been successfully applied to in-plane and out-of-plane displacement field measurements of carbon-fibre reinforced composites. This paper demonstrates how the technique can be used to improve the sensitivity and to extend the measurement range for speckle contouring applications. The angular correlation of the speckle phase images is used to get the desired 3D information of the investigated object surface. It is demonstrated how the angular speckle contouring techinque can easily be automated with respect, for example, to possible industrial applications. Roughness measurements are carried out on milled Rugo test surfaces. All measurements are performed without the usual vibration isolation, and of course, without the treatment of the surface with fine, white powder for contrast enhancement, which would falsify the results.     

基于条纹等值线相关的散斑条纹图处理新方法

在数字散斑干涉术中,通常由物体变形前后得到的两幅原始散斑场用相减方法来得到条纹图,并由相移后的多幅(三幅以上)条纹图来求取相位场。介绍了一种基于条纹等值线相关的条纹图生成新方法,并在此基础上提出了基于单幅干涉条纹图的相位场提取新方法和基于条纹等值线相关的单步相移新方法。实验结果表明,该方法具有良好的结果和发展前景。     

Speckle photography combined with speckle interferometry

By combining speckle interferometry (SI) measurements with speckle photography, the fringe visibility can be kept high despite the presence of a large bulk or rotating motion of the object. This combined technique improves the usability and measuring range of both pulsed and phase-stepped SI-methods. This paper reviews the theory of fringe formation in SI and shows some recent applications of this combined technique.     

散斑干涉相位条纹图的频域滤波处理

为了解决在数字散斑干涉技术测量时,散斑干涉相位条纹图像中大量噪声对相位解包裹结果和精度产生严重影响的问题,介绍了一种条纹正余弦分解和频域低通滤波结合的方法,实现了散斑干涉相位条纹图的高精度滤波。该方法的基本思路是在对相位图像进行滤波处理前,先将相位图通过正余弦函数进行映射转换成两幅图,分别经过频域滤波,然后再合成为相位图。这种分解频域滤波方法可以在滤波的同时,有效保留相位跳变信息。实验结果表明：与传统的图像降噪方法相比,该方法能够在保留图像“尖峰”信息的基础上,较好地滤除图像中的散斑噪声,方法简单有效,有效解决了传统滤波方法应用在相位条纹图中,相图灰度信息丢失10%~40%的问题。     

用于多参数同时测量的散斑干涉仪

本文描述了一种新的散斑干涉仪,它可以同时对表面应变物体的面内位移、离面位移、位移梯度和莫尔曲率进行测量;由于利用了取向滤波方法,在滤波系统输出平面同时得到了与这些参数对应的散斑条纹.还利用散斑空间运动规律较好地解释了散斑干涉与散斑剪切干涉之间的关系.     

Automatic analysis of three-dimensional displacement field using ESPI

Electronic speckle pattern interferometry (ESPI) has been used to study the in-plane and out-of-plane displacements of the object. In order to improve the accuracy, a Fourier filtration algorithm has been used to remove the speckle noise and get the holographic-quality ESPI fringe pattern. The processing steps of this method are described in detail in this paper. In addition, a phase shifter, which is easily used with simplified structure and high stability, is also presented. It can be applied to various coherent arrangements in experiments to obtain phase shifted fringe patterns. Experiments of determining the 3D displacement field of a circular fixed plate with a uniform load have been carried out using these methods. The results presented in this paper indicate that the accuracy of this method is satisfactory.     

A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast

Traditional speckle fringe patterns of electronic speckle pattern interferometry （ESPI） are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach.     

Vibration analysis and non-destructive testing with real-time shearography

Real-time laser speckle shearography coupled with vibration stressing is shown to be an effective means of vibration analysis and non-destructive testing. The shearograms are modulated by a system of live fringes. These fringes are shown to be described by the zeroth-order Bessel function of the first kind and their visibility decreases with increasing fringe order. In vibration analysis, the instantaneous fringe pattern depicts the out-of-plane surface displacement gradient of the object surface at various resonance modes. In non-destructive testing, the flaw depth in a component can be determined without having to determine fringe orders. There is good agreement between the results obtained using the method and those from theory and time-average holography. A major advantage of real-time shearography is its facility for continuous assessment of a vibrating object without the need for secondary shearogram reconstruction.     

Application of digital speckle pattern interferometry and wavelet transform in measurement of transverse vibrations in square plate

In this paper the study of out-of-plane or transverse vibrations in a square plate using digital speckle pattern interferometry (DSPI) is presented. To improve the measurement accuracy, we have implemented a new filtering scheme based on combination of average/median filtering and Symlet wavelet filtering which enhances the signal to noise ratio in the speckle interferogram obtained from DSPI. A large number of fringe patterns are shown for square plate with two different boundary conditions. Experimentally obtained resonance frequencies for the square plate for the boundary condition one edge fixed and other edges being free, the resonance frequencies obtained from DSPI show good agreement with that obtained from classical theory for thin plates.     

Nanoscale deformation measurement by using the hybrid method of gray-level and holographic interferometry

This study extends the use of holographic interferometry to measure the nanoscale out-of-plane displacement with high surface resolution. It is noted that if the deformation is less than half of the optical wavelength, it is hard to find an obvious fringe pattern. Under such a situation, in general, the phase shift method is used. However, it needs to take more than 3 images for phase shifting and phase reconstruction In this paper, a more simple hybrid method of gray-level and holographic interferometry is used to extract fringe skeletons, in which it just needs to take one or two images for the normal deformation measurement directly, even if there exists no obvious fringe pattern. The displacement field with high surface resolution can also be obtained. The proposed method yielded a theoretical precision of 0.15 nm for out-of-plane displacement with a monochromatic CCD camera of 10-bit gray scale (1024 gray scales) sensitivity and microscale surface resolution for millimeter scale object with 640×480 pixels image resolution by an He–Ne LASER (632.8 nm wavelength) light source. The gray-level method is proposed to calculate the non-obvious interferometry fringe by traditional holographic interferometry hologram, and the result showed that this method works for this purpose.     

Contrast enhanced and phase controlled stroboscopic additive fibre optic TV-holography for whole field out-of-plane vibration analysis

A new technique for real-time contrast enhancement and phase control of fringes in additive Stroboscopic TV-holography applied to out-of-plane vibration analysis and its implementation on a fibre-optic electronic speckle pattern interferometer (FOESPI) are presented. Synchronous Stroboscopic illumination, firing two pulses per object vibration period, is combined with simultaneous inter-pulse (high frequency) and inter-frame (low frequency) phase modulation in the reference arm of the ESPI yielding a sequence of frames (interferograms) that are grabbed and processed in real-time. With this technique both speckle and fringe phases are independently controlled by means of the parameters of modulation enabling speckle contrast inversion, as required to enhance the visibility of fringes by sequential subtraction, as well as dynamic fringe phase shifting to solve peakvalley ambiguities.     

Two wavelength simultaneous DSPI and DSP for 3D displacement field measurements

A novel optical system is proposed that implements digital speckle pattern interferometry (DSPI) and digital speckle photography (DSP) simultaneously using two wavelength illumination of an object for simultaneous measurement of all three components of the displacement vector field. A collimated red light illuminates both the object and a reference surface in a DSPI configuration which is sensitive to out-of-plane displacement field while a blue light illuminates the object in a DSP configuration which is sensitive to in-plane displacement fields. A color 3-CCD camera records the red and blue lights individually through its red and blue channels, respectively. Two reference images and one image in the deformed state of the object are required for quantitative measurement. Experimental results are presented to validate the system.     

Variational denoising method for electronic speckle pattern interferometry

Traditional speckle fringe patterns by electronic speckle pattern interferometry (ESPI) are inherently noisy and of limited visibility, so denoising is the key problem in ESPI. We present the variational denoising method for ESPI. This method transforms the image denosing to minimizing an appropriate penalized energy function and solving a partial differential equation. We test the proposed method on computer-simulated and experimental speckle correlation fringes, respectively. The results show that this technique is capable of significantly improving the quality of fringe patterns. It works well as a pre-processing for the fringe patterns by ESPI.     

散斑剪切干涉条纹特性的实验研究

本文通过位移位相存在的真实性实验、小孔滤波的必要性实验、位移梯度的解相关性实验,证实了散斑剪切于涉术的条纹是由物体变形所引起的“位移位相”和“位移微分位相”以及由位移和位移微分共同决定的“附加位相”之和的余弦条纹。实验证实这种余弦条纹的分布,随着滤波孔的位置而变化,它的衬比随着位移和位移梯度的增大而下降。特别是,当在象面上一点相遇的两个物点的象面散斑位移之差的模值大于散斑的直径时,两者相遇的象点上的条纹消失。     

散斑条纹图的自适应窗口滤波方法

针对散斑噪声很难用常用的滤波方法进行滤除,在已有等值线滤波方法的基础上,提出一种更优的自适应窗口滤波方法。由于等值线窗口是在条纹方向图的基础上得到的,深入研究条纹方向的求取方法,提出了一种更为可靠的条纹方向求取算法,在得到高精度条纹方向的同时,还能估计出条纹的密度。使用等值线窗口技术,保持了窗口形状的自适应能力,然后利用对条纹密度的估计,根据条纹的宽度来确定滤波窗口的大小,实现了滤波窗口大小的自适应。最后,根据条纹方向和滤波后的图像可以直接得到条纹密度变化较大的单幅散斑图的相位结果。     

Mechanical characterization of unplasticised polyvinylchloride thick pipes by optical methods

In this work a number of techniques (electronic speckle pattern interferometry, holographic interferometry, strain gauge and finite element method) are brought to bear in order to establish consistency in the results of strain measurement. This is necessary if optical non-destructive testing methods, such as those used here, are to gain acceptance for routine industrial use. The FE model provides a useful check. Furthermore, ESPI fringe data facilitates the extension of FE models, an approach that is of growing importance in component testing.

The use of in-plane and out-of-plane sensitive electronic speckle pattern interferometry (ESPI) for non-destructive material characterization of thick unplasticised polyvinylchloride (uPVC) pipes is presented. A test rig has been designed for stressing pipes by internal pressure. ESPI gives a complete mapping of the displacement field over the area imaged by the video camera. The results for the strain of uPVC obtained from ESPI data and from strain gauges are in good agreement. The value of Young's modulus has been obtained from the fringe data and compared with results obtained using holographic interferometry and from strain gauge measurements. The FE model also produces fringe data that is consistent with the ESPI results.