Simultaneous determination of the three main inorganic forms of nitrogen by ion chromatography

An ion chromatographic method for the determination of nitrite, nitrate and ammonium simultaneously is described. An appropriate eluent-column-detector combination for separating and detecting these ions is discussed. On a bifunctional ion-exchange column, nitrite and nitrate anions were separated by anion exchange and ammonium cation by cation exchange. Nitrite and nitrate were detected by UV spectrometry and ammonium using a chemically suppressed conductivity detector. The detection limits for the three ions were all below 0.02 ppm (w/w) and the relative standard deviations for the three ions were all less than 0.5%. Several samples such as water, soil and acid rain were analysed with this method and the recoveries of the three ions were all within 100 ± 5%. These results agreed well with those obtained by a standard method.     

Use of Griess reagent containing vanadium(III) for post-column derivatization and simultaneous determination of nitrite and nitrate in baby food

An ion chromatographic method with post-column derivatization and spectrophotometric detection is presented for the determination of nitrate and nitrite (NOx) in baby food. NOx residues found naturally or added as preservatives were extracted from baby foods and determined by using ion chromatography with post-column derivatization and spectrophotometric detection. Nitrate was reduced to nitrite online by post-column reduction using vanadium(lll) chloride and heat. Nitrite reacted with Griess reagent to produce a dye that was detected at 525 nm. The use of V(III) and heat to promote the reduction of nitrate to nitrite online is a novel feature of this detection system. The determination of incurred NOx residues in samples by using AOAC Method 993.03 yielded results comparable to those obtained by ion chromatography with spectrophotometric detection. The toxic and carcinogenic metal cadmium used in the AOAC Method to reduce the nitrate to nitrite was avoided. The proposed method provides simultaneous determination of nitrate and nitrite. Average recoveries of nitrate and nitrite residues ranged from 82 to 107% for fortification levels of 25-400 ppm.     

Simultaneous determination of bromide, nitrite and nitrate ions in seawater by capillary zone electrophoresis using artificial seawater as the carrier solution

We describe capillary zone electrophoresis (CZE) for the simultaneous determination of bromide, nitrite and nitrate ions in seawater. Artificial seawater was adopted as the carrier solution to eliminate the interference of high concentrations of salts in seawater. The artificial seawater was free from bromide ion to enable the determination of bromide ion in a sample solution. For the purpose of reversing the electroosmotic flow (EOF), 3 mM cetyltrimethylammonium chloride (CTAC) was added to the carrier solution. A 100 microm ID (inside diameter) capillary was used to extend the optical path length. The limits of detection (LODs) for bromide, nitrite, and nitrate ions were 0.46, 0.072, and 0.042 mg/L (as nitrogen), respectively. The LODs were obtained at a signal to noise ratio (S/N) of 3. The values of the relative standard deviation (RSD) of peak area for these ions were 1.1, 1.5, and 0.97%. The RSDs of migration time for these ions were 0.61, 0.69, and 0.66%. Artificial seawater samples containing various concentrations of bromide, nitrite, and nitrate ions were analyzed by the method. The error was less than +/-12% even if the concentration ratio of bromide ion to nitrite or nitrate ion was 20-240. The proposed method was applied to the determination of bromide, nitrite, and nitrate ions in seawater samples taken from the surface and the seabed. These ions in other environmental waters such as river water and rainwater samples were also determined by ion chromatography (IC) as well as this method.     

Spectrophotometric simultaneous determination of nitrite, nitrate and ammonium in soils by flow injection analysis

A new rapid flow injection procedure for the simultaneous determination of nitrate, nitrite and ammonium in single flow injection analysis system is proposed. The procedure combines on-line reduction of nitrate to nitrite and oxidation of ammonium to nitrite with spectrophotometric detection of nitrite by using the Griess-llosvay reaction. The formed azo dye was measured at 543 nm. The influence of reagent concentration and manifold parameters were studied. Nitrite, nitrate and ammonium can be determined within the range of 0.02–1.60 μg mL⁻¹, 0.02–1.60 μg mL⁻¹ and 0.05–1.40 μg mL⁻¹, respectively. R.S.D. values (n = 10) were 2.66; 1.41 and 3.58 for nitrate, nitrite and ammonium, respectively. This procedure allows the determination and speciation of inorganic nitrogen species in soils with a single injection in a simple way, and high sampling rate (18 h⁻¹). Detection limits of 0.013, 0.046 and 0.047 μg mL⁻¹were achieved for nitrate, nitrite and ammonium, respectively. In comparison with others methods, the proposed one is more simple, it uses as single chromogenic reagent less injection volume (250 mL in stead of 350 mL) and it has a higher sampling rate.     

Determination of Nitrate and Nitrite Ions in Human Plasma by Ion Exchange-High Performance Liquid Chromatography

Abstract

Acetonitrile precipitation of plasma samples followed by injection of supernatant onto a reverse phase precolumn coupled to an anion exchange column allowed ultraviolet detection (214 nm) of eluting nitrate and nitrite ions. Sensitivity in plasma is about 0.01 mM for both ions and linearity is excellent from 0.02 to 1.0 mM. Nitrite accuracy assessed by diazotization coupling was good. Reproducibility studies demonstrated withinrun coefficients of variation of < 4%. Interferences were few. Random endogenous serum nitrate concentrations (0.03–0.12 mM) were determined. Serum nitrite and nitrate concentrations were measured in a patient following an overdosage of isobutyl nitrite. The method is applicable for nitrite/nitrate studies in plasma at these concentrations.     

Ion chromatographic method for the simultaneous determination of nitrite and nitrate by post-column indirect fluorescence detection

This short paper highlights the suitability of ion chromatography with post-column indirect fluorescence detection to determine simultaneously nitrite and nitrate based on the quenching of tryptophan native fluorescence. The method uses an enhanced fluorescence mobile phase containing tryptophan and detects the suppression of fluorescence of the mobile phase due to the elution of the target ions. The phenomenon of fluorescence quenching of tryptophan is highly induced by the presence of phosphate ions. The quenched fluorescence intensity exhibits concentration dependence in the range 1-25 mg/l and 3-65 mg/l for nitrite and nitrate, respectively. The relative standard deviation for five replicates of a standard solution containing a mixture of 5 mg/l of nitrite and 10 mg/l of nitrate lies around 2.8%. This simple coupling technique results in a relatively sensitive, fast, and accurate method, allowing for both qualitative and quantitative analysis of nitrite and nitrate. The method can easily be implemented to real samples such as foodstuffs, fertilizers and soils and is proven to be precise and accurate when compared with reference methods.     

一种基于钝顶螺旋藻藻蓝蛋白荧光猝灭法的汞离子传感新方法

采用反复冻融细胞破裂法、硫酸铵分级盐析以及羟基磷灰石柱层析,从钝顶螺旋藻中提取出高纯度的藻蓝蛋白样品,纯度(A62a/A280)达4.1.该蛋白的紫外-可见吸收光谱表明其特征吸收峰为280、360、620nm,荧光光谱表明其最大发射波长为650 nm.以该藻蓝蛋白为荧光探针,发展了一种基于荧光猝灭法的Hg2检测新方法.并考察了缓冲体系、缓冲液pH值、反应时间、温度以及藻蓝蛋白的浓度等因素对汞离子检测的影响,在0.05 mol/L、pH7.5的磷酸二氢钾-磷酸氢二钠缓冲液中,当藻蓝蛋白浓度为3 mg/L、反应时间为30 min、反应温度为30℃时,该方法的线性范围为0.1～10μmol/L,检出限为0.056 μmol/L.该方法表现出良好的汞离子传感选择性,而且当干扰离子与汞离子的浓度比为40∶1时,多种共存离子对汞离子的检测影响较小.该方法荧光探针提取容易,价格低且环境友好,具有较高的灵敏度和较好的重现性.     

Electrode reactions during electrolytic preparation of nickel hydroxide

We investigate the electrode reactions involved in the electrolytic precipitation of nickel hydroxide from nickel nitrate through quantitative assessment of the reaction products using stainless steel cathode with Ti and Ni anodes. The nitrate ion is reduced at the cathode to form nitrite and ammonium ion, the later being the major product. The production of ammonium ion followed either directly via reduction of nitrate to ammonium ion or in steps via nitrate reduction to nitrite which further reduced to ammonium ion. Finally, we report XRD measurements, tap density, and the discharge capacity performed on the electrolytically precipitated Ni(OH)₂.     

Mechanism of the NO2 conversion to NO2- in an alkaline solution.

The reaction of NO2 and NaOH aqueous solution at room temperature was studied for elucidating the behavior of gaseous NO2 in an alkaline solution. Experimental runs related to NO2 absorption have been carried out in various pH solutions. The nitrite and nitrate ions formed in these absorption solutions were quantitatively analyzed. In the case of pH 5-12, both of the nitrite and nitrate ions were formed simultaneously. On the other hand, only the nitrite ion was formed when the pH of the absorption solution was higher than 13. In this paper, a new reaction mechanism was proposed to explain the selective formation of nitrite ion in the 10 M alkaline solution. In order to confirm the new reaction mechanism, H2(18)O was used as part of the absorption solution for detecting oxygen gas production. The amounts of reaction products: (18)O(18)O, (18)O(16)O and (16)O(16)O, were quantitatively determined. It was confirmed that the new reaction proceeds mainly in the 10 M alkaline solution.     

Kinetic spectrophotometric determination of low levels of nitrite by catalytic reaction between pyrogallol red and bromate

A kinetic spectrophotometric method for the determination of trace nitrite (0.003-1.000 microg/ml) based on its catalytic effect on the reaction between potassium bromate and pyrogallol red in acidic media is described. The reaction is monitored spectrophotometrically by measuring the decreasing colour of pyrogallol red at 467 nm by the fixed-time method. At a given time of 3.0 min at 30 degrees, the detection limit is 0.001 microg/ml and the relative standard deviation for 0.010 microg/ml nitrite is 1.8% (n = 8). The method is free from most interferences, especially from large amounts of nitrate and ammonium. The procedure was successfully applied to the determination of trace nitrite in natural water without preconcentration.     

Application of free-radical chromogens to determination of nitrite and nitrate ions by EPR spectrometry

Various azines and substituted phenylene diamines are oxidized by the nitrite ion to give stable radicals in an autocatalytic reaction. This finding has now been developed into highly sensitive methods for nitrite determination by EPR spectrometry. Thus, when the reagent is phenothiazine, the detection limit for nitrite is 0.012 ppm, the relative standard deviation at 0.05 ppm is 1.9%, and the analytical range is 0-1.5 ppm. With N,N,N',N'-tetramethyl-p-phenylenediamine as the reagent, the corresponding values are 0.025 ppm, 2.6%, and 0-1.3 ppm. Nitrate can be determined after prior reduction to nitrite. A mixture of nitrite and nitrate ions can also be quantitatively analysed. The EPR methods were applied to the determination of the nitrite and nitrate contents of prepacked cooked ham and of soft-spreading cheese. The results agreed well with those obtained by ISO and AOAC standard methods for these samples. ca*|Author for correspondence.     

Determination of trace inorganic anions in seawater samples by ion chromatography using silica columns modified with cetyltrimethylammonium ion

Conventional silica columns dynamically modified with cetyltrimethylammonium ions were evaluated for the determination of UV-absorbing bromide, nitrate, and nitrite in seawater samples. Cetyltrimethylammonium, which is a quaternary ammonium ion, was dynamically introduced onto silica surfaces. The first layer of the modifier was introduced by electrostatic interaction, whereas the second layer was introduced by hydrophobic interaction. The latter layer worked as the anion-exchange sites. The modified conventional silica columns could be used for separation of inorganic anions. Separation of authentic mixture of five anions was achieved within 17 min. The addition of 0.1 mM cetyltrimethylammonium ion to the eluent improved the repeatability of the retention time. Seawater samples could be directly injected onto the prepared conventional silica columns, and bromide, nitrate, and nitrite levels were determined to be 69, 0.13, and 0.016 ppm, respectively.     

Spectrophotometric determination of nitrite based on its catalytic effect on the oxidation of carminic acid by bromate

A highly sensitive and selective method is described for the determination of trace amounts of nitrite based on its effect on the oxidation of carminic acid with bromate. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of carminic acid at 490 nm after 3 min of mixing the reagents. The optimum reaction conditions were 1.8×10⁻¹ mol l⁻¹ H₂SO₄, 3.8×10⁻³ mol l⁻¹ KBrO₃, and 1.2×10⁻⁴ mol l⁻¹ carminic acid at 30°C. By using the recommended procedure, the calibration graph was linear from 0.2 to 14 ng ml⁻¹ of nitrite; the detection limit was 0.04 ng ml⁻¹; the R.S.D. for six replicate determinations of 6 ng ml⁻¹ was 1.7%. The method is mostly free from interference, especially from large amounts of nitrate and ammonium ions. The proposed method was applied to the determination of nitrite in rain and river water.     

Optimisation of post-column reaction detector for HPLC of explosives

Summary Improvements in selectivity and sensitivity in the analysis of common explosives, like nitrate esters, nitramines and nitroaromatic compounds can be achieved by post-column derivatisation in a two step reaction detector. The first step in derivatisation is the photolysis of the analytes with UV at 254 nm. The photo reactor consists of a crocheted 20 m Tefzel capillary, which is coiled around a low pressure mercury lamp. In second step the nitrite ion generated is subsequently detected by a colourimetric reaction. The azo dye formed can be selectively detected at 540 nm.Addition of alkali after chromatographic separation to prevent oxidation of initially formed nitrite to nitrate during photolysis leads to a complex multistage arrangement. However, the contribution to peak broadening by the reactor is negligible and it is possible to detect 25–50 ppb of nitramines and 30–100 ppb of nitrate esters. Another advantage of the method is the selective detection of nitro compounds, even in complex matrices.The trace analysis of explosives is of growing interest in forensic science as well as in environmental analysis. It has been shown [1] that explosives can easily be extracted from soil and debris by the use of supercritical carbon dioxide. The separation and determination of explosives by gas chromatography is hindered by their thermal instability. In HPLC only the nitro aromatic explosives can be detected with sufficient sensitivity. Other types of explosives like the esters of nitric acid or nitramines do not absorb sufficiently in the UV region for sensitive detection. It has been shown [2] that explosives are liable to photochemical decomposition in the UV region, resulting in nitrate and nitrite, which have been detected after separation by ion-pair chromatography with electrochemical detection. A more sensitive and selective detection of nitrite has been possible in flow injection analysis [3]. Here a modified Griess reaction has been used. In a first step nitrite ions are used to form the diazonium salt with sulfanilamide which is coupled in a second step with N-[naphthyl-(1)]-ethylene diamine (NED) to form a redviolet azo dye with an absorption maximum at 540 nm. The advantage of this method is selective detection in the visible region, where hardly any other organic components are detected, which might be present in a crude environmental sample.In this paper the transfer of the Griess reaction to post-column derivatisation in RP chromatography of explosives will be described, and the optimisation of trace analysis of these solutes will be discussed.     

Investigation of the Interaction between Nitrite Ion and Bovine Serum Albumin Using Spectroscopic and Molecular Docking Techniques

The interaction between nitrite ion and bovine serum albumin (BSA), in an aqueous environment, was studied using spectroscopic methods, including fluorescence quenching technique, synchronous fluorescence, UV? Vis spectrophotometry and Resonance Rayleigh Scattering (RRS), and molecular docking technique. The experimental results showed that nitrite ion effectively quenched the intrinsic fluorescence of BSA with the static quenching. The ion‐BSA binding constant was determined to be 3.69×10³ L mol^?1. As the results showed the stoichiometry of binding nitrite ion to BSA was 1 : 1. Furthermore the thermodynamic parameters and nature of the binding force were calculated. The negative ΔH^o and ΔS^o values of reaction between nitrite ion and BSA indicated the predominant forces in the ion‐BSA interactions are hydrogen bonding interactions. Based on the Förster’s theory of non‐radiative energy transfer, the binding distance between nitrite ion and the inner tyrosine and tryptophan residue of BSA were determined to be 2.16 nm. Furthermore binding site of this ion on BSA was carried out by molecular docking technique.     

Determination of low level nitrite and nitrate in biological, food and environmental samples by gas chromatography-mass spectrometry and liquid chromatography with fluorescence detection

Gas chromatography-mass spectrometry (GC-MS) and liquid chromatography with fluorescence detection (LC-FL) methods have been proposed for the determination of low level nitrite and nitrate in biological, food and environmental samples. The methods include derivatization of aqueous nitrite with 2,3-diaminonaphthalene (DAN), enzymatic reduction of nitrate to nitrite, extraction with toluene and chromatographic analyses of highly fluorescent 2,3-naphthotriazole (NAT) derivative of nitrite by using GC-MS in selected-ion-monitoring (SIM) mode and LC-FL. Nitrite and nitrate ions in solid samples were extracted with 0.5 M aqueous NaOH by sonication. The recoveries of nitrite and nitrate ions based on GC-MS and LC-FL results were 98.40% and 98.10% and the precision of these methods, as indicated by the relative standard deviations (RSDs) were 1.00% for nitrite and 1.20% for nitrate, respectively. The limits of detection of the GC-MS in SIM mode and LC-FL methods based on S/N = 3 were 0.02 and 0.29 pg/ml for nitrite and 0.03 and 0.30 pg/ml for nitrate, respectively.     

Chemometric approach to the optimisation of LC-FL and GC-MS methods for the determination of nitrite and nitrate in some biological,food and environmental samples

Gas chromatography–mass spectrometry (GC-MS) method and a liquid chromatography–fluorescence (LC-FL) detection method using experimental design and optimisation approach were improved for the quantitative determination of nitrite and nitrate in biological, food and environmental samples. The obtained recoveries of nitrite and nitrate ions from samples based on both GC-MS and LC-FL results ranged from 98.5% to 98.9% for nitrite and 97.9% to 98.4% for nitrate. The precision of these methods, as indicated by the relative standard deviations (RSDs), was within the range from 2.4% to 3.6% for nitrite and 2.5% to 3.8% for nitrate, respectively. The limits of detection of nitrite and nitrate ions from samples based on GC-MS and LC-FL results ranged from 0.01 to 0.14 ng L^?1 for nitrite and 0.02 to 0.71 ng L^?1 for nitrate, respectively. The optimised isolation procedure by central composite design was successfully applied to real samples. The results revealed that the proposed procedure combined with GC-MS and LC-FL techniques is more sensitive, reliable and selective compared to the other methods available for the precise determination of trace levels of nitrite and nitrate in biological, food and environmental samples.     

A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Determination of nitrite and nitrate in a proposed certified reference material for nutrients in seawater by capillary zone electrophoresis with artificial seawater as the background electrolyte using transient isotachophoresis

We describe a combination of selected ions as a terminating ion which is useful for transient isotachophoresis (ITP) in capillary zone electrophoresis (CZE) for the determination of nitrite and nitrate in seawater. In addition to 150 mM sulfate as the principal terminating ion, 10 mM bromate was added to a sample solution as the additional terminating ion. Artificial seawater containing 3 mM cetyltrimethylammonium chloride (CTAC) was adopted as a background electrolyte (BGE). The limits of detection (LODs) for nitrite and nitrate were 2.2 and 1.0 microg/L (as nitrogen), respectively. The LODs were obtained at a signal to noise ratio (S/N) of 3. The values of the relative standard deviation (RSD) of peak area for these ions were 1.9 and 1.4%. The RSDs of peak height were 1.7 and 1.9%, the RSDs of migration time 0.11%. The proposed method was applied to the determination of nitrite and nitrate in a proposed certified reference material for nutrients in seawater, MOOS-1, distributed by the National Research Council of Canada (NRC). The results almost agreed with the assigned tolerance interval.     

Indirect laser-induced fluorescence detection for capillary electrophoresis using a frequency-doubled diode laser

A blue (452 nm) frequency-doubled diode laser with a quasi-cw optical output power of 10 microW is used for indirect laser-induced fluorescence detection in combination with the capillary electrophoretic separation of inorganic anions. As fluorescing probe ion the anion of 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS) was selected having an absorption maximum of 454 nm in alkaline medium. Employing a capillary coated with linear acrylamide, baseline separation of eight inorganic anions was possible within 5 min. With a separation buffer containing 50 micromol.L(-1) HPTS and 10 mmol.L(-1) lysine the limits of detection for sulfate, nitrite, nitrate, azide, thiocyanate, and chlorate were between 0.9 and 4.7 micromol.L(-1). Separation of chloride and sulfate was achieved by adding 0.25 mmol.L(-1) calcium hydroxide to the separation buffer. Inorganic anions in several mineral and tap water samples have been determined with the technique developed and results are compared to data obtained by ion chromatography in combination with conductivity detection after conductivity suppression.