直接甲醇燃料电池用磺化聚醚醚酮膜初探

应用电化学方法研究了SPEEK膜的甲醇渗透性能.SPEEK膜具有比Nafion115膜低的甲醇渗透.以其作质子交换膜电解质组装的直接甲醇燃料电池(DMFCs)开路电压高于Nafion115膜组装的DMFC开路电压,但电池的放电性能尚待改进.本研究可为SPEEK应用于直接甲醇燃料电池提供一定的依据.     

直接甲醇燃料电池用PEMs的研究进展

本文介绍了用于直接甲醇燃料电池(DMFCs)的质子交换膜(PEMs)的工作原理与性能要求。讨论了影响DMFCs国PEMs的甲醇渗透性能的因素。综述了Nation、改性Nafion膜以及其它新品种膜的研究进展。     

直接甲醇燃料电池质子膜研究进展

本文对直接甲醇燃料电池(DMFC)质子交换膜的要求及目前的研究状况作了简要的概述,特别是从基膜材料结构角度进行分类,较详细地介绍分析以Nafion膜为代表的全氟磺酸膜的各种改性研究及以PBI、PEEK、PSU等基膜材料为代表的聚芳环系列的DMFC质子交换膜的研究情况.总结了质子交换膜的一些研究方法,对直接甲醇燃料电池质子交换膜的发展前景进行了探讨。     

一种新型结构质子交换膜的研究

质子导体的研究近年来受到了广泛的关注，具有质子传导能力的电解质材料可广泛地应用于燃料电池、电解池、电化学反应装置以及传感器等领域，特别是作为质子交换膜燃料电池（PEMFC）的核心组件之一的质子交换膜越来越受到人们的重视。Nafion（Du Pont）全氟磺酸膜是目前广泛用于PEMFC中的一种质子导体。Nafion全氟磺酸膜具有优异的化学稳定性以及在较低温度条件下高的质子电导率，然而其高昂的价格、差的高温性能以及用于直接甲醇燃料电池（DMFC）中时的高甲醇渗透率阻碍了DMFC商业化发展。     

直接甲醇燃料电池用阻醇全氟磺酸复合质子交换膜

全氟磺酸膜(如杜邦公司生产的Nafion系列产品)作为质子交换膜广泛应用于直接甲醇燃料电池,但其存在着燃料甲醇渗透率高的缺陷,是阻碍直接甲醇燃料电池应用的主要问题之一。本文介绍了直接甲醇燃料电池用阻醇全氟磺酸复合质子交换膜的最新研究进展,比较了各类无机、有机添加物对复合膜甲醇渗透率、质子电导率以及电池性能的影响,并讨论了添加物对全氟磺酸质子交换膜甲醇、质子传递的影响机理。此外,针对大多数复合膜以牺牲质子电导来抑制甲醇渗透的问题,对如何提高复合膜质子对甲醇选择性及其未来发展趋势提出了一些设想。     

直接甲醇燃料电池中的膜性能比较

制备了磺化聚醚醚酮(SPEEK)和磺化酚酞型聚醚砜(SPES-C)两种质子交换膜,考察了其质子导电和阻醇性能.实验发现,两种新型质子交换膜具有一定的化学稳定性和质子电导率,尤其在高温下两种新膜的质子电导率与Nafion膜接近.两种新膜的甲醇透过系数要比Nafion膜的低1～2个数量级.分别以两种新型膜和Nafion115膜为电解质制备了直接甲醇燃料电池膜电极,讨论了膜材料的性能对直接甲醇燃料电池性能的影响.结果表明,膜材料的阻醇性越好,电池的开路电压越高;膜的电导率越高,在较高电流密度区域内电池的性能越好.     

燃料电池用质子交换膜的研究进展

质子交换膜是燃料电池的重要组成部分。本文介绍了全氟磺酸膜的优缺点,对其进行改进的方法以及新型质子交换膜的发展情况,重点讨论了各类质子交换膜的制备、结构、性质以及它们在质子交换膜燃料电池(PEMFC)或直接甲醇燃料电池(DMFC)的应用,最后提出质子交换膜的发展趋势。     

磺化聚醚醚酮与壳聚糖共混制备直接甲醇燃料电池用质子交换膜

给出了不同磺化度下的磺化聚醚醚酮(SPEEK)用作质子交换膜的一系列性能,另外提出了一种新型的酸碱共混质子交换膜,其中,磺化聚醚醚酮和壳聚糖分别被选为酸性、碱性高分子电解质,并对所制备的质子交换膜的相关性能如质子传导性,甲醇渗透性,吸水率以及膜溶胀性、热稳定性等进行了表征,结果表明此种新型复合膜尽管在质子传导性能方面有所下降,阻醇性能改变不大,但是膜溶胀性和吸水率方面有了较大的改善.磺化度为71.4%的SPEEK与壳聚糖以5∶1摩尔比共混制备的质子交换膜,其性质可以与商品化的Nafion 117相媲美,有望在甲醇燃料电池中得到应用.     

磺化嵌段型共聚物在质子交换膜燃料电池中的应用*

燃料电池是以碳氢化合物为燃料的一种新型、清洁的发电装置,而其中的质子交换膜燃料电池由于具有可快速启动的优点而可应用于机动车等领域。所用的质子交换膜需要具有高的质子传导性、低的甲醇/水渗透性、好的机械和热稳定性以及合适的价格等特点,但目前已经工业化的Nafion膜并未能全部满足上述要求。为了解决这些问题,目前已经开发了多种新的质子交换膜。本文对其中的磺化嵌段型聚醚砜、磺化嵌段型聚酰亚胺和苯乙烯基嵌段共聚物在质子交换膜燃料电池中的应用进行了综述,并与Nafion膜和相应的无规共聚物的性能进行了比较。最后展望了嵌段共聚物在质子交换膜领域的发展趋势。     

直接甲醇燃料电池中质子交换膜的研究进展

质子交换膜是直接甲醇燃料电池(DMFC)的关键部件之一. 本文系统地介绍了近三年来DMFC中质子交换膜研究的最新进展.     

直接甲醇燃料电池新型聚合物膜的研究

通过溶液共混方法 ,制备了聚偏氟乙烯与聚苯乙烯磺酸 (PVDF_PSSA)、聚偏氟乙烯与Nafion(PVDF_Nafion)两种共混膜 .研究了膜组成对膜电导率和甲醇透过率的影响 .与Nafion 1 1 7膜相比 ,PVDF_Nafion共混膜在Nafion含量为 2 5wt%时 ,电导率σ下降 2个数量级 ,而甲醇透过率P却降低 3个数量级 .若以 (σ/P)为综合指标 ,则PVDF_Nafion共混膜和PVDF_PSSA共混膜的综合性能分别比Nafion 1 1 7膜高约 4 0倍、1 6倍     

Surface modified multi‐walled carbon nanotubes and Nafion nanocomposite membranes for use in fuel cell applications

The preparation and characterization of the nanocomposite polyelectrolyte membranes, based on Nafion, sulfonated multi‐walled carbon nanotubes (MWCNT‐SO₃H) and imidazole modified multi‐walled carbon nanotubes (MWCNT‐Im), for direct methanol fuel cell applications is described. The results showed that the modification of multi‐walled carbon nanotubes (MWCNT) with proton‐conducting groups (sulfonic acid groups or imidazole groups) could enhance the proton conductivity of the nanocomposite membranes in comparison to Nafion 117. Regarding the interactions between the protonated imidazole groups, grafted on the surface of MWCNT, and the negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of the Nafion and MWCNT‐Im, which result in both lower methanol permeability and higher proton conductivity. The physical characteristics of these manufactured nanocomposite membranes were investigated by thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion exchange capacity, as well as proton conductivity. The Nafion/MWCNT‐Im membranes showed the higher proton conductivity, lower methanol permeability, and, as a consequence, a higher selectivity parameter in comparison to the neat Nafion or Nafion membrane containing MWCNT‐SO₃H or ─OH functionalized multi‐walled carbon nanotubes (MWCNT‐OH) membranes. The obtained results indicated that the Nafion/MWCNT‐Im membranes could be used as efficient polyelectrolyte membranes for direct methanol fuel cell applications.     

Pervaporation membranes in direct methanol fuel cells

The membranes in direct methanol fuel cells must both conduct protons and serve as a barrier for methanol. Nafion, the most common fuel cell membrane, is an excellent conductor but a poor barrier. Polyvinyl alcohol pervaporation membranes are good methanol barriers but poor conductors. These and most other pervaporation membranes offer no significant advantages over Nafion in methanol fuel cell applications. However, polybenzimidazole membranes have demonstrated characteristics that suggest up to a 15-fold improvement in direct methanol fuel cells. This improvement may be due to an alternate form of proton conduction in which protons travel via a Grotthus or “hopping” mechanism.     

Low water/methanol permeable Nafion/CHP organic-inorganic composite membrane with high crystallinity

High methanol crossover is one of the main issues of the polyelectrolyte in direct methanol fuel cells (DMFCs). In order to decrease methanol crossover, we introduced a new method that crystallinity control was performed with incorporating CHP (calcium hydroxyphosphate) into Nafion solution. As a result, crystallinity in the composite membranes increased with CHP content compared to cast Nafion accompanying the formation of new crystalline peaks in the original amorphous region of Nafion. On the other hand, water uptake content, methanol sorption/desorption permeability and methanol crossover in the composite membranes remarkably decreased. We conclude that an increase in crystallinity due to the strong interfacial adhesion between Nafion and CHP can suppress the methanol crossover.     

Nanocomposite fuel cell membranes based on Nafion and acid functionalized zeolite beta nanocrystals

We have prepared nanocomposite proton exchange membranes (PEMs) based on Nafion with sulfonic acid functionalized zeolite beta (AFB) as an additive. 2.5 and 5 wt% AFB composite membranes possess proton conductivity/methanol permeability (selectivity) ratios as much as 93% higher than commercial Nafion 117 at 21 °C, and 63% higher at 80 °C. These 2.5 and 5 wt% AFB composite membranes also outperform commercial Nafion 117 in direct methanol fuel cell performance evaluations. The composite membranes are characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, four-electrode impedance for proton conductivity, two-compartment permeation for methanol crossover, and direct methanol fuel cell performance.     

Supercritical carbon dioxide treated Nafion 212 commercial membranes for direct methanol fuel cells

Supercritical carbon dioxide (Sc-CO₂) thermal treatment to enhance performance of Nafion 212 (NR212) commercial membranes for direct methanol fuel cells (DMFCs) is described. It is shown that the microstructure of NR212 membranes is re-organized after the Sc-CO₂ treatment, and then the performance of NR212 membranes is improved. Specifically the thinner NR212 membranes after the Sc-CO₂ treatments have higher proton conductivity and better capacity of barrier to methanol crossover compared with the thicker Nafion 117 membranes. It is demonstrated that the DMFC performance of the Sc-CO₂ treated NR212 membranes is better than that of Nafion 117 membranes.     

Nafion–polyfurfuryl alcohol nanocomposite membranes for direct methanol fuel cells

Commercial Nafion 115 membranes were successfully modified by in situ acid-catalyzed polymerization of furfuryl alcohol (PFA) within Nafion structures. FT-IR and AFM were used to characterize the chemical and morphological structures of the Nafion–PFA nanocomposite membrane obtained. The methanol permeation experiments showed that the methanol flux through the Nafion–PFA nanocomposite membranes dropped by a factor of 2.2–2.7 when PFA loading was 3.9–8.0 wt.%. Importantly, the proton conductivity of the membranes decreased only slightly at a low PFA loading (<8 wt.%). The nanocomposite membranes with higher selectivity (e.g., proton conductivity/methanol crossover) achieved a much higher DMFC performance at both room temperature and 60 °C.     

Blend membranes of Nafion/sulfonated poly(aryl ether ketone) for direct methanol fuel cell

Sulfonated poly(aryl ether ketone) (sPAEK) synthesized by LG Chem. was confirmed by FT-IR. To estimate the thermal stability, glass transition temperature and decomposition temperature were investigated. They showed that sPAEK had good thermal properties. The proton conductivity, methanol permeability and water uptake of sPAEK were also measured. Nafion/sulfonated poly(aryl ether ketone) composite membranes were prepared by blending two materials. The blend ratios of sPAEK and Nafion were 2:1, 3:1, 5:1, and 7:1. The blend membranes showed phase separated morphology since they became immiscible during the solvent evaporation process. Due to the differences in specific gravity and solvent concentration profile during the solvent evaporation process, the upper region had lower Nafion volume fraction with smaller domains and the lower region had higher Nafion volume fraction with larger domains. Mechanical properties such as the stress at break, yield stress, Young's modulus, and elongation at break were measured. The sPAEK had better mechanical properties than Nafion. The mechanical properties increased with increasing sPAEK content. Proton conductivity and methanol permeability of the blend membranes were lower than those of Nafion. Both decreased with decreasing Nafion content. Since the methanol permeability of sPAEK was lower than that of Nafion, sPAEK acted as the methanol barrier. Water uptake of sPAEK was higher than that of Nafion.     

Novel crosslinked membranes based on sulfonated poly(ether ether ketone) for direct methanol fuel cells

Novel covalently crosslinked membranes based on sulfonated poly(ether ether ketone) and carboxylated polysulfone exhibit much lower methanol crossover and better performance in direct methanol fuel cells at 65 °C in 1 and 2 M methanol solutions compared to Nafion 115 membranes.