表面等离激元传播的调制

光学衍射极限极大地制约了纳米光子器件的发展和应用.基于表面等离激元的纳米器件由于具有突破衍射极限传播和处理光信号的特性而受到广泛关注.通过调控表面等离激元的传播,可以实现纳米尺度上光信号的调制,对片上集成纳米光子回路和光信息处理技术的发展具有重要意义.本文主要介绍了表面等离激元传播调制的基本原理及近年来的研究进展,并分析了不同类型的表面等离激元传播调制的特点.     

十字结构银纳米线的表面等离极化激元分束特性

金属纳米线波导可以将光局域在亚波长尺度内传播, 在纳米光子集成回路方面有着重要的作用. 本文应用有限元方法, 研究了十字结构银纳米线的表面等离极化激元分束特性. 结果表明, 不同模式的表面等离极化激元在十字结构三个分支的输出依赖于端面的几何结构参数. 此外, 研究还发现由于不同模式表面等离极化激元叠加, 在十字结构的分支上出现了周期性电场分布.     

一种石墨烯波导褶皱激发表面等离子体激元的设计

设计了褶皱石墨烯波导结构激发表面等离子体激元,通过设计周期阵列结构实现了表面等离子体激元传播损耗的补偿.理论分析了周期阵列结构的表面等离子体激元传播模型和补偿损耗的方式,结果表明褶皱衍射激发表面等离子体激元波导不仅能够激发表面等离子体激元,还能利用表面等离子体激元波矢关系实现器件参数控制,周期阵列增益全程补偿损耗的方式可以显著增加表面等离子体激元的传播距离.数值分析结果进一步表明:该结构具备了保持亚波长尺寸的强局域化优势;周期阵列增益全程补偿可以显著提高纳米腔中的电场强度,降低传输损耗;波导结构的粒子反转水平较高,自发辐射噪声的扰动较低.设计的石墨烯波导器件可以为微纳光学集成、光子传感和测量等领域提供理想的亚波长光子器件.     

一种石墨烯波导褶皱激发表面等离子体激元的设计（英文）

设计了褶皱石墨烯波导结构激发表面等离子体激元,通过设计周期阵列结构实现了表面等离子体激元传播损耗的补偿.理论分析了周期阵列结构的表面等离子体激元传播模型和补偿损耗的方式,结果表明褶皱衍射激发表面等离子体激元波导不仅能够激发表面等离子体激元,还能利用表面等离子体激元波矢关系实现器件参数控制,周期阵列增益全程补偿损耗的方式可以显著增加表面等离子体激元的传播距离.数值分析结果进一步表明:该结构具备了保持亚波长尺寸的强局域化优势;周期阵列增益全程补偿可以显著提高纳米腔中的电场强度,降低传输损耗;波导结构的粒子反转水平较高,自发辐射噪声的扰动较低.设计的石墨烯波导器件可以为微纳光学集成、光子传感和测量等领域提供理想的亚波长光子器件.     

纳米集成光路中的光源、光波导和光增强

使用近场光学显微术(scanning near-field optical microscopy, SNOM)研究了ZnO亚微米线端面出射性质,不同空间形貌Ⅱ-Ⅵ族半导体荧光器件光波导特性,二维光子晶体、准晶光子晶体对LED的出射增强作用以及表面等离激元(surface plasmon polariton, SPP)与半导体纳米荧光器件的相互作用,对纳米集成光路中的光源、光波导、光增强三个重要问题做了实验和理论上的分析.研究发现半导体微纳米线端面出射光束的质量与样品的直径有密切关系.通过合理地设计其直径和 关键词： 纳米集成光路 扫描近场光学显微术 光波导 光增强     

纳米集成光路中的光源、光波导和光增强

使用近场光学显微术(scanning near-field optical microscopy, SNOM)研究了ZnO亚微米线端面出射性质，不同空间形貌Ⅱ-Ⅵ族半导体荧光器件光波导特性，二维光子晶体、准晶光子晶体对LED的出射增强作用以及表面等离激元(surface plasmon polariton, SPP)与半导体纳米荧光器件的相互作用，对纳米集成光路中的光源、光波导、光增强三个重要问题做了实验和理论上的分析.研究发现半导体微纳米线端面出射光束的质量与样品的直径有密切关系.通过合理地设计其直径和     

近场研究表面等离子体在银纳米线上的传输

通过双探针近场光学扫描显微镜在银纳米线上实现近场激发和近场收集表面等离子体,用一个探针在银纳米线的一端近场激发表面等离子体,另一个探针近场探测银纳米线上的表面等离子体强度分布,得到强度分布图.强度分布图显示表面等离子体在银纳米线的一端被有效激发并且有一部分表面等离子体沿着银纳米线和基底的界面传播到了另一端.用有限元法对银纳米线内的传播模式进行数值模拟,结果显示银纳米线内存在两种表面等离子体传播模式,分别为基模和高阶模.沿着银纳米线和基底介质之间传输的基模表面等离子体由于传输环境稳定,散射损耗小,实际传输长度接近模式传输长度,达10μm以上;而高阶模表面等离子体由于部分裸露在空气中受表面缺陷散射的影响,散射损耗大,实际传输长度远小于模式传输长度.研究表明:以能量高度束缚的基模表面等离子体作为载体,不仅可以实现低损耗传输,还可以减小集成器件之间的信号串扰,有效提高信息传输的安全性,在集成光学中具有重要应用.     

表面等离子体激元纳米集成光子器件

纳米集成光子学的核心关键技术之一在于新型高效纳米光耦合器、纳米光波导等纳米光子器件的设计与制备.表面等离子体激元（SPPs）是由外部电磁场与金属表面自由电子相互作用形成的一种相干共振,除具有巨大的局部场增强效应外,还具有将激发电磁场能量限制在纳米尺度范围的特点.基于SPPs的各种纳米光子器件被誉为当今最有希望的纳米全光集成回路的基础,成为目前国际上的一个研究热点.文章对基于SPPs的纳米集成光子器件的最新研究进展和研究成果进行评述。     

金属微结构纳米线中等离激元传播和分光特性

本文从理论和实验两方面探讨了具有微结构的金属纳米线系统中表面等离激元传播规律和分光特性. 我们由麦克斯韦方程组出发, 利用严格耦合波近似和有限元差分等方法首先从理论上给出了金属纳米线系统中等离激元的色散关系和能带特征, 然后基于微结构的银纳米线及其等离激元能带结构, 设计并制备出等离激元分光原型器件, 实验展示其将不同频率的光在微小空间分离的特性. 该研究结果是我们前期相关工作的延续和补充, 可应用于构造多功能集成的光子芯片和新型亚波长光电材料和器件.     

金属表面等离激元耦合理论研究进展

金属表面等离激元作为一种微纳米结构中自由电子在光场作用下的集体振荡效应,由于其振荡电场被强烈地束缚在亚波长尺度范围内,可以作为未来微纳米光子回路及器件的信息载体,同时也可以在微纳米尺度上增强光与物质的相互作用.本文首先系统地从理论上总结金属与入射电磁波相互作用时的光学行为及性质,然后简述激发金属中不同等离激元模式的物理本质、金属表面等离激元振荡动力学过程及当前表面等离激元耦合理论的最新进展.     

Surface plasmon polariton waveguides with subwavelength confinement

Surface plasmon polaritons(SPPs) are evanescent waves propagating along metal-dielectric interfaces, which provide an effective way to realize optical wave guiding with subwavelength confinement. Metallic nanostructures supporting SPPs,that is, plasmonic waveguides, are considered as required components to construct nanophotonic devices and circuits with a high degree of miniaturization and integration. In this paper, various types of plasmonic waveguides operating in the visible, infrared, and terahertz regions are reviewed, and the status of the research on their fundamentals, fabrications,and applications is provided as well. First, we discuss the mechanisms of SPPs beyond the diffraction limit, and their launching methods. Then, the characteristics of SPPs on various plasmonic waveguides are reviewed, including top-down and bottom-up fabricated types. Considering applications, certain prototypes of plasmonic devices and circuits constructed by plasmonic waveguides for bio/chemo sensing, router, and light modulation are demonstrated. Finally, a summary and future outlook of plasmonic waveguides are given.     

Stimulated emission of surface plasmon polaritons in a microcylinder cavity

We have observed stimulated emission of surface plasmon polaritons (SPPs) in dye-doped polymeric microcylinder cavities deposited onto gold and silver wires. The stimulated emission spectra featured a characteristic series of laser modes, with modal spacing corresponding to SPPs propagating at the interface between the metal and dielectric. A plasmonic microlaser adds to the toolbox of plasmonic devices and plasmonic metamaterials and enables on-chip plasmonic generation and loss compensation.     

数值模拟二维间隙表面等离子波导传输特性

利用表面等离子激元的新颖特性,设计了二维间隙表面等离子波导.以这种结构为基础通过变形和组合形成90°直角弯曲波导、T型光功率分配器和光开光,采用时域有限差分法研究了它们的传输特性.结果表明:不同于介质光波导的弯曲损耗来自于辐射泄漏,90°直角弯曲间隙表面等离子波导的能量损耗主要来自于金属中的欧姆热损耗.在间隙达到40 nm以上后,当直行段的长度适当时,弯曲段的透射率较相同长度的直波导的透射率要大.T型光功率分配器在两输出波导的间隙宽度比达到0.6及以上时,不同于传统介质波导的分光原则,能量主要沿等效折射率较小的输出臂流出.当两输入光的相位反相时,T型光开关处于输出截止的状态,当两输入光的相位同相时,T型光开关处于输出导通的状态.所有波导间隙均小于衍射极限,实现了超衍射极限传播,可用于未来了超大规模集成光路中.     

Surface plasmon polariton propagation in nanoscale metal gap waveguides

Based on finite-difference time-domain simulation of the propagation characteristics of surface plasmon polaritons (SPPs) in optical circuits made from metal gap waveguides (MGWs) with nanometric gap widths, we theoretically demonstrate that two structures that consist of splitting and recombining MGWs and of coupling MGWs can be used as nanoscale Mach-Zehnder interferometers. MGW arrays show capabilities for array imaging and for controlling the flow of SPPs. Other potential applications of coupling MGWs, as SPP switches, directional couplers, and even as a nanoscale counterpart for observing linear and nonlinear dynamic behavior of electromagnetic fields, are also predicted and discussed. Our results point to an interesting way to manipulate optical signals and provide efficient sensing in nanophotonic architectures.     

Tunable coupling of a hybrid plasmonic waveguide consisting of two identical dielectric cylinders and a silver film

The propagation length of surface plasmon polaritons(SPPs) is intrinsically limited by the metallic ohmic loss that is enhanced by the strongly confined electromagnetic field. In this paper, we propose a new class of hybrid plasmonic waveguides(HPWs) that can support long-range SPP propagation while keeping subwavelength optical field confinement. It is shown that the coupling between the waveguides can be well tuned by simply varying the structural parameters. Compared with conventional HPWs, a larger propagation length as well as a better optical field confinement can be simultaneously realized. The proposed structure with better optical performance can be useful for future photonic device design and optical integration research.     

深亚波长约束的表面等离子体纳米激光器研究

本文提出了一种新颖的基于半导体纳米线/空气间隙/金属薄膜 复合结构的表面等离子体纳米激光器, 并给出了理论研究和仿真分析. 这种结构通过金属界面的表面等离子体模式与高增益介质纳米线波导模式耦合, 从而使场增强效应得到显著提高. 同时通过数值仿真研究, 得到该混合波导结构的模式特性和增益阈值随空气槽宽度、纳米线半径的变化规律, 表明它可以实现对输出光场的深亚波长约束, 同时保持低损耗传输和高场强限制能力. 通过最优化选择, 最终得到纳米等离子体激光器的最优结构尺寸. 关键词： 表面等离子体 混合等离子体波导 纳米激光器     

Switchable surface plasmon dichroic splitter modulated by optical polarization

For the miniaturization of optical devices, surface plasmon polaritons (SPPs) have been widely utilized due to their outstanding confinement and field‐enhancement characteristics. Analyzing a spectrum of optical signals and splitting certain regions of the spectrum range within a submicrometer‐scale structure are demanded for optical integrated systems. In this paper, a novel type of dichroic surface plasmon launcher that can switch the launching direction according to incident polarization states is demonstrated. Compared to the previously reported plasmonic dichroic splitters, the proposed schemes do not use any asymmetric geometry for directional launching. Hence, the direction of guided SPPs can be interchanged according to the polarization state. Such characteristics will be helpful to design switchable plasmonic devices that can be applied to active plasmonic integrated circuits.     

Dielectric‐loaded plasmonic waveguide components: Going practical

Surface plasmon propagating modes supported by metal/dielectric interfaces in various configurations can be used for radiation guiding similarly to conventional dielectric waveguides. Plasmonic waveguides offer two attractive features: subdiffraction mode confinement and the presence of conducting elements at the mode‐field maximum. The first feature can be exploited to realize ultrahigh density of nanophotonics components, whereas the second feature enables the development of dynamic components controlling the plasmon propagation with ultralow signals, minimizing heat dissipation in switching elements. While the first feature is yet to be brought close to the domain of practical applications because of high propagation losses, the second one is already being investigated for bringing down power requirements in optical communication systems. In this review, the latest application‐oriented research on radiation modulation and routing using thermo‐optic dielectric‐loaded plasmonic waveguide components integrated with silicon‐based photonic waveguides is overviewed. Their employment under conditions of real telecommunications is addressed, highlighting challenges and perspectives.     

Reducing crosstalk between nanowire-based hybrid plasmonic waveguides

Hybrid plasmonic waveguides based on a surface oxidized dielectric nanowire placed on a metal surface can facilitate simultaneously deep subwavelength mode confinement and large propagation length. Directional coupling based on such waveguides are theoretically investigated. Much lower crosstalk is noticed for such hybrid plasmonic waveguides compared to conventional waveguides based on bare dielectric nanowires. Some modifications, such as vertically placing the metal surfaces or using a metallic block between the nanowires, are studied which can further reduce the crosstalk between two waveguides. The proposed low crosstalk structures based on hybrid plasmonic waveguides can provide a simple platform for plasmonic integration which can at the same time easily interface with traditional photonic circuits.