火焰特征辐射谱线测温方法实验研究

本文利用CCD光纤光谱仪,对不同燃烧状态下的煤粉火焰辐射光谱进行测量.发现通过辐射光谱法测量的火焰温度和使用热电偶测量的火焰温度存在一定的偏差.光谱法的温度较热电偶的温度高约60～160℃,沿火焰行程,热电偶和光谱法测量的火焰温度存在较大的特性差异,光谱法测得的火焰温度沿火焰行程基本不变.同时,光谱法火焰温度的高低受到煤质特性,空气湿度,燃烧过程中的散热条件等因素的影响.     

辐射模型和弥散效应对多孔介质内燃烧影响的数值模拟

本文根据气固两相局部非热平衡假设,建立了甲烷/空气预混气在惰性多孔介质内的一维层流燃烧数学模型。分别采用附加导热、Rossland模型和二通量法模型求解固体能量方程中的辐射源项,研究了热辐射模型和弥散效应对多孔介质内燃烧火焰结构的影响。结果表明,多孔固体表面辐射的影响不可忽略,辐射模型对火焰温度的预测影响显著,而弥散效应对气体温度的分布及反应热影响则较小。     

低温容器高真空多层绝热性能分析

高真空多层绝热性能对于低温容器的应用与安全至关重要。文中依据逐层导热计算模型,对高真空多层绝热低温容器的气体导热、间隔材料的固体导热和反射屏的辐射换热进行了分析计算,给出了多层绝热层中每一层的温度分布情况,气体导热、固体导热及辐射换热所占的比例,换热系数随层数的变化情况,以及真空度对绝热性能的影响,为提高高真空多层绝热性能提供了理论依据。     

应用红外辐射吸收法测量火焰温度

1.引言 使用碳氢燃料的各类发动机和其他高温气体都提出了火焰或高温气体的温度测量问题.传统的一些方法,如热电偶直接测量法,使用时受到某些条件的限制,并干扰原来的物理场分布,给出的温度也不是瞬时值等,而光学测量方法则没有这些缺点.应用红外辐射光谱测量各种物态的温度,具有测量动态范围大,灵敏度高等主要优点,特别适合于测     

基于角系数跟踪反射能量研究太空中空心圆柱体温度分布

利用角系数跟踪反射能量求得辐射传递因子,探讨太空中太阳入射下、热控涂层对空心圆柱体温度分布的影响.使用有限差分法离散圆柱坐标系下三维稳态导热方程,考虑辐射-导热边界条件,用Patankar线性化方法将边界条件线性化,用点迭代法来求解名义上的线性化方程组从而得到空心圆柱体的温度分布.热控涂层表面的辐射特性用一组矩形谱带来近似.本文的研究方法对太空航天器件温度分布的精确数值求解具有参考价值.     

碳氢扩散火焰实验研究：燃烧气氛对火焰光谱与温度的影响

辐射是各种燃烧过程中热传递的主要方式。在不同的火焰中,辐射光谱分布十分复杂。在这项工作中,利用光谱仪测量了可见光(200～900 nm),近红外(900～1 700 nm)和中红外(2 500～5 000 nm)波段火焰的光谱强度,分析了空气和富氧气氛下扩散火焰的光谱特征。并基于光谱分析,定量得到了火焰中碳烟以及气体发射的辐射力,计算了火焰的温度分布。结果表明,空气燃烧中的火焰温度低于富氧燃烧中的火焰温度。在空气气氛下,火焰中的碳烟和气体均对中的热辐射起着重要作用。而在富氧气氛下,气体对于火焰热辐射更为重要。在可见光和近红外波段,由于在空气气氛下火焰中碳烟的大量形成,光谱曲线显示出了良好连续性。而富氧气氛下火焰的辐射光谱降低。在中红外波段,空气气氛下火焰的气体辐射明显弱于富氧气氛下火焰的气体辐射。     

内嵌定向高导热层疏导式结构热防护机理分析

针对飞行器高超声速飞行时严重的气动加热环境, 提出内嵌定向高导热层的疏导式热防护系统. 运用数值方法分析了特定条件下内嵌定向高导热层的疏导式系统的防热效果, 外壁面最高温度下降了9.1%, 内壁面最高温度下降了31.5%, 高温区和低温区都被封闭在外层区域, 内层温度更加均匀, 实现了热流由高温区向低温区的转移, 削弱了高温区的热载荷, 强化了整体结构的热防护能力. 研究表明, 随着气动热流密度比与辐射散热面积比的增大, 疏导结构的冷却效果增强. 本文还对疏导防热系统的结构参数和材料参数对冷却效果的影响进行了分析, 为结构的设计和材料的选取提供一定的依据.     

蜡烛火焰三维温度场重建实验研究

本文在实验室中以蜡烛火焰为研究对象,研究采用辐射图像处理技术重建蜡烛三维温度场。并采用细丝热电偶实测火焰局部温度,对蜡烛火焰三维温度场可视化的结果进行了比较。结果表明,火焰高温区的重建温度是合理的,此方法能够很好地重建单峰、双峰三维温度分布。进一步证实了基于火焰图像处理技术实现三维温度场可视化的可行性。     

基于分子转-振光谱精细结构的火焰温度遥测方法

燃烧火焰温度是固体推进剂等重要参数,本文研究了基于分子转-振光谱精细结构的火焰温度遥测方法.根据分子转-振光谱线的展宽机制,研究了分子谱线线型.结合朗伯-比耳吸收定律,去除谱线中心受大气低温气体吸收影响较大的数据点后,利用谱线两翼的数据点进行谱线线型拟合,利用分子转-振光谱精细结构温度遥测方法将经拟合修正后数据反演火焰...     

铜铁合金与金铁合金低温热电偶特性研究

本文以铜铁合金、金铁合金低温热电偶的分度实验为基础,对两种热电偶的分度特性、微观机理等进行了分析比较.并在微型气体制冷机二级冷头温度(10K)测定中进行了实际考核.给出了国产含铁0.13％的镍铬-铜铁热电偶(NiCr-Cu 0.13％Fe)4—273K的分度表.从理论和实验上肯定了在较广的温域使用铜铁合金低温热电偶与金铁合金具有相同优越的热电性能.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.