An efficient Stille cross‐coupling reaction catalyzed by ortho‐palladated complex of tribenzylamine under microwave irradiation

The catalytic activity of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)}(μ‐Br)]₂ complex as an efficient, stable and catalyst that is non‐sensitive to air and moisture was investigated in the Stille cross‐coupling reaction of various aryl halides with phenyltributyltins under microwave irradiation. The substituted biaryls were produced in excellent yield in short reaction times using a catalytic amount of this complex in DMF at 100 C. The combination of dimeric complex as homogeneous catalyst and microwave irradiation and also DMF as microwave‐active polar solvent gave higher yields in shorter reaction times. Copyright © 2011 John Wiley & Sons, Ltd.     

Accelerated Heck reaction using ortho‐palladated complex with controlled microwave heating

Palladium‐catalyzed Heck couplings utilizing [Pd{C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ palladacycle catalyst and microwave irradiation lead to formation of different coupling products. This complex is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even less reactive chlorides. The cross‐coupled products were produced in excellent yields. The reaction time was reduced from hours to minutes and full conversion was achieved under microwave irradiation. Copyright © 2009 John Wiley & Sons, Ltd.     

Heck coupling reaction using monomeric ortho‐palladated complex of 4‐methoxy‐ benzoylmethylenetriphenylphosphorane under microwave irradiation

The activity of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenyl‐ phosphoraneylide), was investigated in the Heck–Mizoroki C? C cross‐coupling reaction under conventional heating and microwave irradiation conditions. The complex is an active and efficient catalyst for the Heck reaction of aryl halides. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N‐methyl‐2‐pyrrolidinone (NMP) at 130 °C and 600 W. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Accelerated Heck reaction using ortho‐palladated complex in a nonaqueous ionic liquid with controlled microwave heating

The activity of {Pd[C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4] (µ‐Br)}₂ complex was investigated in the Heck–Mizoroki C C cross‐coupling reaction under conventional heating and microwave irradiation conditions in molten salt tetrabutylammonium bromide as the solvent and promoter at 130 °C. This complex in these conditions is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even chlorides, and also arenesulfonyl chlorides. Copyright © 2011 John Wiley & Sons, Ltd.     

Palladium‐catalyzed cyanation reaction of aryl halides using K4[Fe(CN)6] as non‐toxic source of cyanide under microwave irradiation

An efficient method for preparation of aryl nitriles—using [Pd{C₆H₂(CH₂CH₂ NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ complex as an efficient catalyst and K₄[Fe(CN)₆] as a green cyanide source—from aryl bromides, aryl iodides and aryl chlorides under microwave irradiation has been reported. This complex has been demonstrated to be an active and efficient catalyst for this reaction. Using a catalytic amount of this synthesized palladium complex in DMF at 130 °C led to production of the cyanoarenes in excellent yields in short reaction times. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of substituted biaryls via Suzuki,Stille and Hiyama cross‐coupling and homo‐coupling reactions by CN‐dimeric and monomeric ortho‐palladated catalysts

The catalytic activity of dimeric [Pd{C₆H₂(CH₂CH₂NH₂)–(OMe)₂,2,3}(μ‐Br)]₂ and monomeric [Pd{C₆H₂(CH₂CH₂NH₂)–(OMe)₂,2,3}Br(PPh₃)] complexes as efficient, stable and air‐ and moisture‐tolerant catalysts was investigated in the Suzuki, Stille and Hiyama cross‐coupling and homo‐coupling reactions of various aryl halides. Substituted biaryls were produced in excellent yields in short reaction times using catalytic amounts of these complexes. The monomeric complex was demonstrated to be more active than the corresponding dimeric catalyst for the cross‐coupling reaction of unreactive aryl bromides and chlorides. The combination of homogeneous metal catalysts and microwave irradiation gave higher yields of products in shorter reaction times. Copyright © 2013 John Wiley & Sons, Ltd.     

A comparative homocoupling reaction of aryl halides using monomeric orthopalladated complex of 4‐methoxybenzoylmethylenetri‐ phenylphosphorane under conventional and microwave irradiation conditions

The activity of [Pd(C₆H₄CH₂NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenylphosphoraneylide) was investigated in the homocoupling reaction of a vast range of aryl halides under both conventional and microwave irradiation conditions and their results were compared. The complex was active and showed high efficiency in the formation of new C‐C bonds. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N, N‐dimethylformamide at 120 °C. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2011 John Wiley & Sons, Ltd.     

(BeDABCO)2Pd2Cl6 (1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride) as a highly active catalytic system for the Stille cross‐coupling reaction under microwave irradiation

An efficient catalytic system using (BeDABCO)₂Pd₂Cl₆ was developed for the Stille cross‐coupling reaction. The substituted biaryls were produced in excellent yields in short reaction times using a catalytic amount of this catalyst in DMF at 120 °C. The ionic character of homogeneous catalyst and microwave irradiation and also DMF as microwave‐active polar solvent gave higher yields and shorter reaction times than conventional heating. Benzyl DABCO as an efficient ligand and also a quaternary ammonium salt had an efficient stabilizing effect on the Pd(0) species. Copyright © 2013 John Wiley & Sons, Ltd.     

ε‐Caprolactone polymerization under air by the biocatalyst: Magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide

This study investigated the synthesis of the biocatalyst, magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide (Mg(BHT)₂) complex, and the ring‐opening polymerization (ROP) of ε‐caprolactone (CL). The complex demonstrates high catalytic activity and controllable of molecular weight for the ROP of CL in tetrahydrofuran at room temperature, even when polymerization was performed under air. Before this study, the polymerization of CL had never been performed using a magnesium catalyst under air at room temperature. Various forms of alcohols with different purposes were also used as initiators with Mg(BHT)₂. The results show that the magnesium complex acts as a perfect catalyst because of its high catalytic activity and control ability without any cytotoxicity in the polymerization of CL, making it suitable for biomedical applications. In addition, nanoparticle formation, cytotoxicity, and phototoxicity of tri‐2‐hydroxyethyl ester [Ce6‐(CH₂CH₂OPCL)₃] were also studied in this article and Ce6‐(CH₂CH₂OPCL)₃ formed nanoparticle can act as a nanophotosensitizer for photodynamic therapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oxidation of alkanes and secondary alcohols to ketones with tert‐butyl hydroperoxide catalyzed by a water‐soluble ruthenium complex under solvent‐free conditions

An easily synthesized water‐soluble ruthenium complex, [C₆H₅CH₂N(CH₃)₂H]₂[Ru(dipic)Cl₃] (dipic =2,6‐pyridinedicarboxylate), as a catalyst showed high efficiency in the oxidation of alkanes and secondary alcohols to their corresponding ketones under solvent‐free and low‐catalyst‐loading conditions. This catalytic system could tolerate a variety of substrates and gave the corresponding ketones in good to excellent yields. The products were easily separated and purified due to the water solubility of the ruthenium complex.     

Recyclable Palladium Catalysts for the Heck/Sonogashira Reaction under Microwave‐assisted Thermomorphic Conditions

The reaction of allyl palladium(II) chloride dimer and 4,4′‐bis(R_fCH₂OCH₂)‐2,2′‐bpy, 1a–b , in the presence of AgOT_f resulted in the synthesis of cationic palladium complex, [Pd(η³‐allyl)(4,4′‐bis‐(R_fCH₂OCH₂)‐2,2′‐bpy)](OT_f), 2a–b where R_f = C₉F₁₉ ( a ), C₁₀F₂₁ ( b ), respectively. The reaction of [PdCl₂(CH₃CN)] or K₂PdCl₄ with 1b , gave rise to the synthesis of [PdCl₂(4,4′‐bis‐(C₁₀F₂₁CH₂OCH₂)‐2,2′‐bpy)], 3b . The quantitatively determined solubility curves of 2a–b and 3b in DMF indicated dramatic increase of solubility for 2a – b and 3b from ?40 to 90 °C. The catalyst‐recoverable Pd‐catalyzed Heck/Sonogashira reactions were successfully achieved in DMF with microwave‐assistance. The cationic Pd‐catalyzed Heck arylation of methyl acrylate was selected to demonstrate the feasibility of recycling 2a–b using DMF as a solvent under microwave‐assisted thermomorphic conditions. At the end of each cycle, the product mixtures were cooled, and then the catalysts were recovered by decantation. The Heck arylation catalyzed by 2b under microwave‐assisted mode exhibited good recycling results favoring the trans product. To our knowledge, this is the first example of cationic Pd‐catalyzed Heck arylation under microwave‐assisted thermomorphic conditions. Additionally, recoverable 3b ‐catalyzed Sonogashira reactions were also achieved successfully in DMF. The reactions under microwave‐assistance gave much better results in yield and in efficiency than that under conventional thermal heating.     

Palladium-Catalyzed Synthesis of Symmetrical Biaryls Under Microwave Irradiation and Conventional Heating

The activity of the [Pd{C₆H₄(CH₂N(CH₂Ph)₂)}(µ-Br)]₂ complex was investigated in the synthesis of symmetrical biaryls under both conventional and microwave irradiation conditions, and their results were compared. This complex is efficient, stable, and not sensitive to air or moisture and is a catalyst for the homo-coupling reaction of aryl iodides, bromides, and even chlorides. The products were produced in excellent yields in short reaction times using a catalytic amount of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)(µ-Br)]₂ complex in N-methylpyrolidine (NMP) at 130 °C. In comparison to conventional heating conditions, the reactions under microwave irradiation gave better yields in shorter reaction times.     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

Synthesis of hantzsch 1,4‐dihydropyridines under solvent‐free condition using zn[(L)proline]2 as lewis acid catalyst

The present short communication describes a Lewis acid (Zn[(L)proline]₂) catalysed one pot synthesis of Hantzsch 1,4‐dihydropyridine (DHP) derivatives under solvent‐free condition by conventional heating and microwave irradiation. The Lewis acid catalyst Zn[(L)proline]₂ used in this reaction afford moderate to good yield. The catalyst is reusable upto five cycles without appreciable loss of its catalytic activity.     

MNPs‐NHC6H4SO3H as high‐performance catalyst for the synthesis of 1,4‐diazepines containing tetrazole ring under microwave irradiation

MNPs‐NHC₆H₄SO₃H as an efficient catalyst was prepared and characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), DLS dynamic light scattering (DLS), and thermogravimetric analysis (TGA) techniques. The catalytic activity of MNPs‐NHC₆H₄SO₃H was investigated in the synthesis of 1,4‐diazepines containing the tetrazole ring via a four‐component reaction under microwave irradiation. The heterogeneous catalyst could be recovered easily and reused six times without significant loss of its catalytic activity. The present work demonstrates the advantages of microwave irradiation‐assisted heterogeneous catalysis in the synthesis of 1,4‐diazepines containing the tetrazole ring, compounds that generate great attention in many applications, particularly in medicinal chemistry and drug discovery.     

Vinyl polymerization of norbornene catalyzed by a new bis(β‐ketoamino)nickel(II) complex–methylaluminoxane system

A new β‐ketoimine ligand was prepared through traditional condensation of 2‐acetylcyclohexanone with 1‐naphthylamine. Consequently, the new moisture‐ and air‐stable bis(β‐ketoamino)nickel(II) complex Ni[2‐CH₃C(O)C₆H₈(NAr)]₂ (Ar = naphthyl) was synthesized and characterized. The solid‐state structures of the ligand and complex have been determined by single‐crystal X‐ray diffraction. Additionally, the new complex is a highly active catalyst precursor for polymerization of norbornene in combination with methylaluminoxane. Copyright © 2005 John Wiley & Sons, Ltd.     

A Noble‐Metal‐Free Nickel(II) Polypyridyl Catalyst for Visible‐Light‐Driven Hydrogen Production from Water

The complex [Ni(bpy)₃]²⁺ (bpy=2,2′‐bipyridine) is an active catalyst for visible‐light‐driven H₂ production from water when employed with [Ir(dfppy)₂(Hdcbpy)] [dfppy=2‐(3,4‐difluorophenyl)pyridine, Hdcbpy=4‐carboxy‐2,2′‐bipyridine‐4′‐carboxylate] as the photosensitizer and triethanolamine as the sacrificial electron donor. The highest turnover number of 520 with respect to the nickel(II) catalyst is obtained in a 8:2 acetonitrile/water solution at pH 9. The H₂‐evolution system is more stable after the addition of an extra free bpy ligand, owing to faster catalyst regeneration. The photocatalytic results demonstrate that the nickel(II) polypyridyl catalyst can act as a more effective catalyst than the commonly utilized [Co(bpy)₃]²⁺. This study may offer a new paradigm for constructing simple and noble‐metal‐free catalysts for photocatalytic hydrogen production.     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

Microwave-enhanced cyanation of aryl halides with a dimeric <Emphasis Type="Italic">ortho</Emphasis>-palladated complex catalyst

Abstract  

A new dimeric ortho-palladated complex of 2-methoxyphenethylamine was synthesized and characterized and its application as a cyanation catalyst was investigated. The main advantages of this catalyst are its easy preparation, handling, stability, and moisture insensitivity. Thus, [Pd{C₆H₃(CH₂CH₂NH₂)-4-OMe-5-κ ²-C,N}(μ-Br)]₂ showed excellent catalytic activity for the cyanation of aryl iodides and bromides with K₄[Fe(CN)₆], in DMF in the presence of K₂CO₃ under microwave irradiation and conventional heating at 130 °C to give the desired cyanoarene products in good to high yields. The less reactive aryl chlorides also react with K₄[Fe(CN)₆] to give moderate yields of the aromatic nitriles. The effects of various parameters such as solvent, base, and amount of catalyst were studied. The reaction is suitable for a wide variety of substituted aryl halides with different electronic properties. Application of microwave irradiation improved the yields of the reactions and reduced the reaction times from hours to minutes.     

Microwave‐assisted ring‐opening polymerization of p‐dioxanone

The ring‐opening polymerization (ROP) of p‐dioxanone (PDO) under microwave irradiation with triethylaluminum (AlEt₃) or tin powder as catalyst was investigated. When the ROP of PDO was catalyzed by AlEt₃, the viscosity‐average molecular weight (M_v) of poly(p‐dioxanone) (PPDO) reached 317,000 g mol^?1 only in 30 min, and the yield of PPDO achieved 96.0% at 80 °C. Tin powder was successfully used as catalyst for synthesizing PPDO by microwave heating, and PPDO with M_v of 106,000 g mol^?1 was obtained at 100 °C in 210 min. Microwave heating accelerated the ROP of PDO catalyzed by AlEt₃ or tin powder, compared with the conventional heating method. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3207–3213, 2008