Photochemistry of the IrCl<Subscript>6</Subscript><Superscript>2−</Superscript> complex in aqueous solutions in the presence of the bromide anions

Laser flash photolysis (308 nm) was applied to study photochemistry of the IrCl₆ ²⁻ complex in aqueous solutions in the presence of the Br⁻ anions. The formation of the Br₂ ^·− radical anions in the reaction between the Br⁻ ion and secondary radical pair formed after the photon absorption by the initial complex was observed. The Br₂ ^·− radical anions decay both in recombination and in the reaction with the initial IrCl₆ ²⁻ complex.     

The influence of the organolithium reagent nature on the possibility of the O→C<Subscript>sp</Subscript> migration of the R<Subscript>3</Subscript>Si group in propynes HC≡CCH<Subscript>2</Subscript>OSiR<Subscript>3</Subscript>

A possibility of the O→C_sp 1,4-migration of the R₃Si group in silyl ethers of terminal acetylenic alcohols upon treatment with organolithium reagents (RLi) was studied. In the case of 3-trimethylsilyloxypropyne, depending on the nature of RLi, the heterolysis of the Si—O bond occurs either by the action of acetylide formed as a result of deprotonation with the formation of 3-trimethylsilylprop-2-yn-1-ol trimethylsilyl ether, or by the action of the metalation agent with the formation of propargyl alcohol. The realization of the O→C_sp 1,4-migration of the Me₃Si group requires the use of mild organolithium reagents (lithium hexamethyldisilazanide and diisopropylamide). Silyl ethers having steric hindrance at the carbon atom bonded to the reaction center or around the silicon atom do not react with the studied organolithium reagents.     

Regime of superhigh reactivity of the YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6 + δ</Subscript> superconductor toward the components of air

Physicochemical features of the YBa₂Cu₃O_{6 + δ} superconductor synthesized via ceramic route and subjected to a kind of modification by long-term exposure to an atmosphere with low pH₂O have been studied by X-ray diffraction, thermal analysis, and magnetometry. The resulting material had a high degree of saturation with air components at room temperature and 30% humidity, up to 1.5 wt % in 30 days, which is not inherent in YBa₂Cu₃O_{6 + δ}.     

Features of high-temperature behavior in NdCaCoO<Subscript>4</Subscript>—the catalyst of the partial oxidation of methane to syngas

The peculiarities of the high-temperature (373–1173 K) behavior and transport properties of NdCaCoO₄, which is a highly active and selective catalyst of the partial oxidation of methane to syngas, were considered. A relationship between its thermal and electrophysical properties and the structure and defectiveness of the oxygen sublattice was found. The electric conductivity of this compound, which is a two-dimensional analog of perovskite, was found to be almost independent of the oxygen pressure (\(p_{O_2 } = 10^{ - 4} - 1\) atm) and to increase with temperature, reaching ～100 S/cm at 1173 K. The temperature dependence of the conductivity of the n-type semiconductor NdCaCoO₄ has two thermoactivation regions (373–573 and 573–873 K), in which the activation energy is almost doubled (0.46 and 0.81 eV, respectively). The discovered tendencies that determine the unique catalytic properties of this material are probably due to the change in the energy spectrum of this compound. The hypothetical reasons for this change are discussed.     

Study of the effect of methods for liquid-phase synthesis of nanopowders on the structure and physicochemical properties of ceramics in the CeO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Two alternative chemical synthesis methods—cryotechnological coprecipitation of hydroxides and cocrystallization of salts—were used for preparing (CeO₂)_1–x (Y₂O₃) _x nanopowders (x = 0.10, 0.15, 0.20) with a mean coherent scattering domain size of ~7–11 nm and S _sp = 2.1–97.5 m²/g. From these nanopowders, ceramic nanomaterials with mean coherent scattering domain sizes of ~61–85 nm were synthesized. It was studied how the phase composition, microstructure, and electrical transport properties of the produced samples depend on the Y₂O₃ content of a CeO₂-based solid solution and on the synthesis method. It was shown that, in the series (CeO₂)_1–x (Y₂O₃) _x (x = 0.10, 0.15, 0.20), the solid solution (CeO₂)_0.90(Y₂O₃)_0.10 has the highest ionic conductivity with the ion transport number t _i = 0.73 (600°C). In its physicochemical characteristics, this ceramic can be used as a solid electrolyte of intermediate-temperature fuel cells.     

Thermogravimetric study of the reduction of CuO–WO<Subscript>3</Subscript> oxide mixtures in the entire range of molar ratios

The present study reports the results of investigation on the role of metakaolin in the formation of ettringite in a model relevant to Portland cement. The model consists of ternary system (Trio) metakaolin–lime–gypsum. Five samples of defined ternary system were cured at different temperatures 20, 30, 40, 50 and 60 °C. Conduction calorimeter TAM AIR was mainly used to capture heat evolution at different temperatures. Thermoanalytical (simultaneous TGA/DSC) and X-ray diffraction methods were used to identify different products after curing. It results that ettringite is the main hydration product supplemented by calcium silicate and calcium aluminosilicate hydrates according to sample composition. The mechanism and kinetics of hydration, as displayed by calorimetric curves, depend on composition of samples and curing temperatures. Two main types of processes have been elucidated: reaction of aluminum ions with sulfate ones in the presence of calcium ions in aqueous solution to form ettringite supplemented by pozzolanic activity leading to the formation of calcium silicate and calcium aluminosilicate hydrates. Concomitant condensation of alumina and silica species and carbonation have influenced the course of hydration. Activation energy E _a depends slightly on composition of ternary system.     

Mechanochemical Activation of Cu–CeO<Subscript>2</Subscript> Mixture as a Promising Technique for the Solid-State Synthesis of Catalysts for the Selective Oxidation of CO in the Presence of H<Subscript>2</Subscript>

A new ecologically clean method for the solid-phase synthesis of oxide copper–ceria catalysts with the use of the mechanochemical activation of a mixture of Cu powder (8 wt %) with CeO₂ was developed. It was established that metallic copper was oxidized by oxygen from CeO₂ in the course of mechanochemical activation. The intensity of a signal due to metallic Cu in the X-ray diffraction analysis spectra decreased with the duration of mechanochemical activation. The Cu¹⁺, Cu²⁺, and Ce³⁺ ions were detected on the sample surface by X-ray photoelectron spectroscopy. The application of temperature-programmed reduction (TPR) made it possible to detect two active oxygen species in the reaction of CO oxidation in the regions of 190 and 210–220°C by a TPR-H₂ method and in the regions of 150 and 180–190°C by a TPR-CO method. It is likely that the former species occurred in the catalytically active nanocomposite surface structures containing Cu–O–Ce bonds, whereas the latter occurred in the finely dispersed particles of CuO on the surface of CeO₂. The maximum conversion of CO (98%, 165°C) reached by the mechanochemical activation of the sample for 60 min was almost the same as conversion on a supported CuO/CeO₂ catalyst.     

Formation of the center of ignition in a CH<Subscript>3</Subscript>Cl–Cl<Subscript>2</Subscript> mixture under the action of UV light

The dependence of temperature on time is investigated using a microthermocouple at different distances from a UV light source in a mixture of chlorine and chloromethane. These relationships give an idea of the size and location of a center of photoignition. It is found that if the size of the reaction vessel in the direction of the luminous flux is much greater than the dimensions of the ignition center, the thermal expansion of a reacting gas mixture has a huge impact on such photoignition parameters as the critical concentration limits and the critical intensity of UV radiation. It is found that by increasing the length of the vessel, some chlorinated combustible mixtures lose the ability to ignite when exposed to UV light.     

Effect of the sequence of chemical transformations on the spatial segregation of components and formation of periclase-spinel nanopowders in the MgO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–H<Subscript>2</Subscript>O System

Specific features of the process in which oxide nanopowders are formed in a hydrothermal treatment of coprecipitated magnesium and iron oxides were studied. It was shown that the rate at which oxide nanoparticles are formed increases when reagents structurally close to the final product are used. It was found that, with the hydrothermal treatment of coprecipitated magnesium and iron hydroxides at 450°C combined with the subsequent thermal treatment in air at temperatures of 400–600°C, it is possible to obtain a homogeneous mixture of nanocrystalline powders based on an iron-containing spinel phase and magnesium oxide.     

Molecular dynamics simulation of the key characteristics of the supercritical CO<Subscript>2</Subscript>–pentaerythritol tetraacetate system

Supercritical CO₂ is widely used in many fields of industry. Investigation of statistical mechanics of CO₂ fluid under quasi critical and supercritical state has great significance. Equilibrium molecular dynamics (EMD) simulations are carried out to investigate the statistical mechanics and macroscopic performance of CO₂ fluid under the quasi critical and supercritical state. The results show that the bond length and bond angle distributions for supercritical CO₂ are Gaussian distribution basically. The dimers’ proportion of supercritical CO₂ system changes with pressure increasing. T-type dimer has high share within the system when pressure is higher than 9MPa. It can be inferred that T-type dimer leads to CO₂ physical properties changing tempestuously under supercritical state. The effect that lubricating oil has on microstructure and heat transfer of supercritical CO₂ is also investigated in the present work. The results show the lubricating oil produces significant effect on the dimers’ structure under low pressure.     

Quantum-chemical study of the role of conical intersections in photoisomerization processes of the [RuCl<Subscript>5</Subscript>NO]<Subscript>2−</Subscript> complex

The potential surfaces of the ground and lowest excited states of the [RuCl₅NO]_2? complex ion were studied by density functional theory. The conical intersections between the potential surfaces of the ground and lowest excited states were found and characterized. The possible routes from the conical intersection points to the ground state and metastable bond isomers were traced. A preliminary scheme, describing photoisomerizations in the complex, was suggested.     

Dependence of enthalpies of formation of the Cu<Superscript>2+</Superscript> complexes with glycinate ions on the composition of water—dimethylsulfoxide solvent

Enthalpies of the complexing reactions of copper (II) with glycinate ions in mixtures of water with dimethylsulfoxide (DMSO) containing up to 0.9 mole parts of organic component (298 K) were obtained using a titration calorimeter. It was established that upon an increase in the DMSO content, the exothermicity of complexing increases at the first and second steps of the coordination. The obtained results were analyzed from the viewpoint of the solvation approach, based on the thermodynamic characterization of all reagents. It was shown that the main origin of the increase in the exothermicity of the complexing reactions is a weakening of ligand solvation when the DMSO concentration increases.     

Bypassing the lack of reactivity of endo-substituted norbornenes with the catalytic rectification–insertion mechanism

The catalytic 1,2-insertion polymerization of polar norbornenes (NBEs) leads to the formation of functional rigid macromolecules with exceptional thermal, optical and mechanical properties. However, this remarkable reaction is plagued by the low reactivity of the polar monomers, and most notably of those bearing a functional group in endo position. We have examined the polymerization mechanism of NBEs bearing one or two CO₂Me groups either in exo or endo position catalyzed by the so-called naked allyl Pd⁺ SbF₆^– catalyst (1). Although endo dimethyl ester of 5-norbornene-2,3-dicarboxylic acid (NBE(CO₂Me)₂) is polymerized by 1, two endo units are never inserted consecutively along the polymer chain. Indeed, 1 is a tandem catalyst which not only catalyzes the insertion of the monomer but also the isomerization of endo and exo isomers. Thus, the polymerization of endo monomers proceeds via a novel mechanism, coined rectification–insertion mechanism, whereby half of the endo monomers are rectified into exo ones prior insertion, leading to the formation of an alternating endo–exo copolymer using an endo only feedstock. With this mechanism, the lack of reactivity of endo norbornenes is bypassed, and the polymerization of predominantly endo polar NBEs bearing a variety of functionalities such as esters, imides, acids, aldehydes, alcohols, anhydrides, or alkyl bromides proceeds with catalyst loadings as low as 0.002 mol%.     

Thermodynamic analysis of the structure of aqueous solutions of C<Subscript>12</Subscript>–C<Subscript>18</Subscript> hydrocarbons

Thermodynamic cycles including the increments \(\Delta G_{CH_2 }^0 , \Delta H_{CH_2 }^0 \), and \(T\Delta S_{CH_2 }^0 \) were constructed for dissolution, evaporation, hydrophobic hydration of C₅–C₉ hydrocarbons, and transfer from vapor (\(\Delta G_{CH_2 }^0 \) = ?0.7 kJ·mol^?1, \(\Delta H_{CH_2 }^0 \) = 2.9 kJ·mol^?1, \(T\Delta S_{CH_2 }^0 \) = 3.6 kJ·mol^?1) and water (\(\Delta G_{CH_2 }^0 \) = ?1.4 kJ·mol^?1, \(\Delta H_{CH_2 }^0 \) = 5.8 kJ·mol^?1, \(T\Delta S_{CH_2 }^0 \) = 7.2 kJ·mol^?1) to micelles of C₁₂–C₁₈ hydrocarbons. The formation of bistable hydrated micelles of C₁₂–C₁₈ is explained by a transition between the order-disorder states in an assembly of small (nano) systems of water. The extensive parameters of small systems and critical phenomena predicted by fluctuation theory are discussed.     

State of active components on the surface of the PdCl<Subscript>2</Subscript>-CuCl<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for the low-temperature oxidation of carbon monoxide

The state of the active constituents of the freshly prepared PdCl₂-CuCl₂/γ-Al₂O₃ catalyst for the low-temperature oxidation of the carbon monoxide by molecular oxygen was studied by X-ray absorption spectroscopy (XAS), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance IR Fourier transform spectroscopy (DRIFTS). It was shown that copper in the form of a crystalline phase of Cu₂Cl(OH)₃ with the structure of the mineral paratacamite and palladium chloride in an amorphous state occurred on the surface of γ-Al₂O₃. According to XAS data, the local environment of palladium consisted of four chlorine atoms, which formed a flat square with an increased distance between palladium and one of the chlorine atoms. The evolution of the local environments of copper and palladium upon a transition from the initial salts to the impregnating solutions and chlorides on the surface of γ-Al₂O₃ was considered. The role of γ-Al₂O₃ in the formation of the Cu₂Cl(OH)₃ phase was discussed. It was found by the DRIFTS method that linear (2114 cm⁻¹) and bridging (1990 and 1928 cm⁻¹) forms of coordinated carbon monoxide were formed upon the adsorption of CO on the catalyst surface. The formation of CO₂ upon the interaction of coordinated CO with atmospheric oxygen was detected. Active sites including copper and palladium were absent from the surface of the freshly prepared catalyst.     

Pulse radiolysis study of the oxidation of the I<Superscript>−</Superscript> ions with the radical anions Br<Subscript>2</Subscript><Superscript>·−</Superscript> in an aqueous solution: formation and properties of the radical anion BrI<Superscript>·−</Superscript>

The radiation chemical redox transformations in solutions of bromides in the presence of minor additives of iodides were studied by pulse radiolysis. The change in the concentrations of the Br⁻ and I⁻ ions changes the ratio of the formed short-lived radical anions Br₂ ^·−, BrI^·−, and I₂ ^·−. The spectrum of the mixed radical anion BrI^·− contains a broad optical band at 370 nm with ɛ₃₇₀ = 9650 L mol⁻¹ cm⁻¹. The reduction potential of the BrI^·−/Br⁻, I⁻ pair is 1.25 V. The rate constants for the forward and backward reactions Br₂ ^·− + I⁻ ⇌ BrI^·− + Br⁻ are k _f = 4.3·10⁹ and k _r = 1.0·10⁵ L mol⁻¹ s⁻¹, respectively; for the reactions BrI^·− ⇌ Br⁻ + I^·, k _f = 5.7·10⁸ s⁻¹ and k _r = 1.0·10¹⁰ L mol⁻¹ s⁻¹. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1787–1792, September, 2008.     

Investigation of the Role of Ionic Liquids in Tuning the p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Values of Some Anionic Indicators

The effect of imidazolium-based ionic liquids, ([C₁₂mim][Cl] and [C₈mim][Cl]), on the acid-base equilibria of two sulfonated indicators has been studied. The presence of ILs leads to decreased pK _a values because of the stronger electrostatic interaction of cationic ILs with the basic forms of the indicators with more negative charge. The longer alkyl side chain of [C₁₂mim][Cl] compared to [C₈mim][Cl] results in stronger hydrophobic interaction of this IL with the basic forms of the dyes leading to a more effective decrease in the pK _a values. Also, the transition points and transition intervals of the acid-base titration curves of the indicators were affected by the presence of ILs. It was found that the IL interaction with acid-base indicators also results in sharpening the acid-base titration curves of the indicators. From these observations, it is concluded that the presence of ILs can tune the pK _a values of indicators. All the experiments were performed spectrophotometrically and the results were obtained using curve fitting methods.     

Thermogravimetric study of the dehydration reaction of LiCl·H<Subscript>2</Subscript>O

The dehydration of LiCl·H₂O was studied under inert helium atmosphere by DTA/TG for different heating rates. The dehydration of LiCl·H₂O proceeds through a two step reaction between 99–110 and 160–186°C, respectively. It leads to the formation of LiCl·0.5H₂O as intermediate compound. The proposed mechanism is: and Based on the temperature peak of the DTA signals the activation energies of the two reactions were determined to be 240 kJ mol⁻¹ (step 1) and 137 kJ mol⁻¹ (step 2), respectively.     

Enthalpy of solution of VOCl<Subscript>3</Subscript> in dilute sodium hydroxide solutions and the standard enthalpy of formation of the HVO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> ion

The calorimetric enthalpies of solution of liquid vanadium oxytrichloride in dilute sodium hydroxide solutions were measured at 298.15 K and ionic strengths I = 0.5, 1.0, or 1.5 (NaClO₄). The standard enthalpy of formation of the HVO ₄ ^2? ion was calculated from the measured data.