State of active components on the surface of the PdCl<Subscript>2</Subscript>-CuCl<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for the low-temperature oxidation of carbon monoxide

The state of the active constituents of the freshly prepared PdCl₂-CuCl₂/γ-Al₂O₃ catalyst for the low-temperature oxidation of the carbon monoxide by molecular oxygen was studied by X-ray absorption spectroscopy (XAS), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance IR Fourier transform spectroscopy (DRIFTS). It was shown that copper in the form of a crystalline phase of Cu₂Cl(OH)₃ with the structure of the mineral paratacamite and palladium chloride in an amorphous state occurred on the surface of γ-Al₂O₃. According to XAS data, the local environment of palladium consisted of four chlorine atoms, which formed a flat square with an increased distance between palladium and one of the chlorine atoms. The evolution of the local environments of copper and palladium upon a transition from the initial salts to the impregnating solutions and chlorides on the surface of γ-Al₂O₃ was considered. The role of γ-Al₂O₃ in the formation of the Cu₂Cl(OH)₃ phase was discussed. It was found by the DRIFTS method that linear (2114 cm⁻¹) and bridging (1990 and 1928 cm⁻¹) forms of coordinated carbon monoxide were formed upon the adsorption of CO on the catalyst surface. The formation of CO₂ upon the interaction of coordinated CO with atmospheric oxygen was detected. Active sites including copper and palladium were absent from the surface of the freshly prepared catalyst.     

Regime of superhigh reactivity of the YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6 + δ</Subscript> superconductor toward the components of air

Physicochemical features of the YBa₂Cu₃O_{6 + δ} superconductor synthesized via ceramic route and subjected to a kind of modification by long-term exposure to an atmosphere with low pH₂O have been studied by X-ray diffraction, thermal analysis, and magnetometry. The resulting material had a high degree of saturation with air components at room temperature and 30% humidity, up to 1.5 wt % in 30 days, which is not inherent in YBa₂Cu₃O_{6 + δ}.     

The influence of the organolithium reagent nature on the possibility of the O→C<Subscript>sp</Subscript> migration of the R<Subscript>3</Subscript>Si group in propynes HC≡CCH<Subscript>2</Subscript>OSiR<Subscript>3</Subscript>

A possibility of the O→C_sp 1,4-migration of the R₃Si group in silyl ethers of terminal acetylenic alcohols upon treatment with organolithium reagents (RLi) was studied. In the case of 3-trimethylsilyloxypropyne, depending on the nature of RLi, the heterolysis of the Si—O bond occurs either by the action of acetylide formed as a result of deprotonation with the formation of 3-trimethylsilylprop-2-yn-1-ol trimethylsilyl ether, or by the action of the metalation agent with the formation of propargyl alcohol. The realization of the O→C_sp 1,4-migration of the Me₃Si group requires the use of mild organolithium reagents (lithium hexamethyldisilazanide and diisopropylamide). Silyl ethers having steric hindrance at the carbon atom bonded to the reaction center or around the silicon atom do not react with the studied organolithium reagents.     

Diagram of the PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript> system

A phase diagram of the PbF₂–SnF₂ system has been studied by differential thermal analysis and X-ray powder diffraction. The system forms Pb_1–хSn_хF₂ (х ≤ 0.33) solid solution and three compounds. Pb₂SnF₆ decomposes in solid state by a peritectoid reaction at 350°С; Pb₃Sn₂F₁₀ and PbSnF₄ melt by peritectic reactions at 565 and 380°С, respectively. The eutectic coordinates are 180°С, 90 mol % SnF₂.     

Highly Efficient Mesoporous V<Subscript>2</Subscript>O<Subscript>5</Subscript>/WO<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> Catalyst for Selective Catalytic Reduction of NO<Subscript>x</Subscript>: Effect of the Valence of V on the Catalytic Performance

Mesoporous WO₃–TiO₂ support was synthesized by hydrothermal method, mesoporous V₂O₅/WO₃–TiO₂ catalyst was synthesized by impregnation method and used for selective catalytic reduction (SCR) of NO_x with a excellent NO_x conversion at a wider operating temperature ranging from 200 to 460?°C. In the range of 260–440?°C, NO_x conversion reached to 98.6%, and nearly a complete conversion. Even with the existence of 300 ppm SO₂, NO_x conversion was only a little decline. The catalyst was characterized by a series of techniques, such as XRD, BET, XPS, TEM, Raman and H₂-TPR. It was concluded that V₂O₅/WO₃–TiO₂ catalyst was ascribe to antase TiO₂, and also the high crystallinity of anatase TiO₂ could improve the SCR performance. More interested, V₂O₅/WO₃–TiO₂ catalyst exhibited the typical mesoporous structure according to the BET results. In addition, the TEM results indicated that the active components of V and W were well-dispersed on the surface of TiO₂, while the enhancement of dispersion could improve the activity of catalysts. More importantly, the concentration ratio of V⁴⁺/(V⁵⁺?+?V⁴⁺?+?V³⁺) performed the key role in improving the activity of V₂O₅/WO₃–TiO₂ catalyst.     

The effect of the synthesis method on the morphological and luminescence characteristics of α-Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>

A promising yellow phosphor, α-Zn₂V₂O₇, was synthesized at temperatures below the phase transition temperature (610 ± 5°C) by three different methods: solid-phase and microwave processes and thermolysis of a water–salt composition. According to powder X-ray diffraction, the structures of all samples belonged to space group C/2c. Depending on the method of synthesis, the particle size varied from 500 nm (thermolysis of a water–salt composition) to 5–8 μm (ceramic and microwave methods). The excitation spectra of all samples are in the UV region (220–400 nm) and the emission spectra are in the 400–750 nm wavelength range. The photoluminescence spectra of the samples are non-elementary, which is caused by specific features of the electronic charge transfer in the structural VO₄ tetrahedra.     

Regularities of formation of complex oxides with the fluorite structure in the ZrO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The crystal and local structures of the complex oxides (1–x)ZrO₂ ? xY₂O₃ (YSZ) (x = 0.08–0.40) prepared by precipitation from solutions of metal salts followed by heat treatment in air were comprehensively studied by X-ray diffraction and Raman spectroscopy. Despite the same crystal structure type of the YSZ powders (cubic system, space group \(Fm\overline 3 m\) (225)), there are differences in the local structure of the samples. Comparison of the Raman spectra recorded at different laser excitation wavelengths provided the conclusion that the peaks observed in the Raman spectra of the YSZ samples with high yttrium content (x = 0.18–0.40) are likely to be due to luminescence of the powders.     

Impedance Study of the Conductivity of Solid Oxide Electrolyte Films SrZr<Subscript>0.95</Subscript>Y<Subscript>0.05</Subscript>O<Subscript>3–δ</Subscript> and CaZr<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3–δ</Subscript>

Information on the across-plane conductivity of films of solid-oxide electrolytes SrZr_0.95Y_0.05O_3–δ and CaZr_0.9Y_0.1O_3–δ deposited on ion-conducting supports is acquired by the impedance method. It is shown that the support/film interface and the intergrain boundaries considerably affect the across-plane charge transfer in the film. The effect of the crystallographic orientation of the YSZ support on the microstructure and conductivity of the CaZr_0.9Y_0.1O_3–δ electrolyte film is demonstrated.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Phase Diagram of the NaNO<Subscript>2</Subscript>—KNO<Subscript>3</Subscript> System in the 0 to 1 Molar Fraction Range of Concentrations of KNO<Subscript>3</Subscript>

The temperature dependence of the phase composition of KNO₃—NaNO₂ mixtures in the 0 to 1 molar fraction range of concentrations of KNO₃ is investigated. A phase diagram of the KNO₃—NaNO₂ binary system in the range of concentrations from 0 to 1 molar fractions of KNO₃ is drawn on the basis of DTA results. The composition of the eutectic mixture and its melting temperature is determined experimentally.     

Thermodynamic analysis of the structure of aqueous solutions of C<Subscript>12</Subscript>–C<Subscript>18</Subscript> hydrocarbons

Thermodynamic cycles including the increments \(\Delta G_{CH_2 }^0 , \Delta H_{CH_2 }^0 \), and \(T\Delta S_{CH_2 }^0 \) were constructed for dissolution, evaporation, hydrophobic hydration of C₅–C₉ hydrocarbons, and transfer from vapor (\(\Delta G_{CH_2 }^0 \) = ?0.7 kJ·mol^?1, \(\Delta H_{CH_2 }^0 \) = 2.9 kJ·mol^?1, \(T\Delta S_{CH_2 }^0 \) = 3.6 kJ·mol^?1) and water (\(\Delta G_{CH_2 }^0 \) = ?1.4 kJ·mol^?1, \(\Delta H_{CH_2 }^0 \) = 5.8 kJ·mol^?1, \(T\Delta S_{CH_2 }^0 \) = 7.2 kJ·mol^?1) to micelles of C₁₂–C₁₈ hydrocarbons. The formation of bistable hydrated micelles of C₁₂–C₁₈ is explained by a transition between the order-disorder states in an assembly of small (nano) systems of water. The extensive parameters of small systems and critical phenomena predicted by fluctuation theory are discussed.     

Zr<Subscript>5</Subscript>Ir<Subscript>2</Subscript>In<Subscript>4</Subscript> – A Superstructure of the Lu<Subscript>5</Subscript>Ni<Subscript>2</Subscript>In<Subscript>4</Subscript> Type

Summary. Zr₅Ir₂In₄ was synthesized by reaction of the elements in a glassy carbon crucible in a water-cooled sample chamber of an induction furnace. The sample was characterized by X-ray diffraction on both powder and single crystals. Zr₅Ir₂In₄ crystallizes with a pronounced Lu₅Ni₂In₄ type subcell, space group Pbam, a=1739.5(6), b=766.3(2), c=338.9(2) pm. Weak additional reflections force a doubling of the subcell c axis. The superstructure of Zr₅Ir₂In₄ is of a new type: Pnma, a=1739.5(6), b=677.8(2), c=766.3(2) pm, wR2=0.0529, 1592 F² values, and 60 variable parameters. The group-subgroup scheme for the klassengleiche symmetry reduction is presented. The formation of the superstructure is most likely due to a puckering effect (size of the iridium atoms). The crystal chemistry of Zr₅Ir₂In₄ is briefly discussed.     

Phase equilibria in the Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–CdO system and the thermal stability of Cd<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and CdNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Phase equilibria were studied in the Nb₂O₅–CdO system in the Nb₂O₅-rich region including CdNb₂O₆ and Cd₂Nb₂O₇. It was determined that CdNb₂O₆ and Cd₂Nb₂O₇ in air are stable to 1150 and 1120°C, respectively, and that, above these temperatures, there is solid-phase decomposition of niobates with CdO release in the gas phase. Along with the cadmium oxide evaporation, the Cd₂Nb₂O₇ decomposition is accompanied by the formation of cadmium metaniobate CdNb₂O₆ and the CdNb₂O₆ decomposition results in the formation of niobium oxide Nb₂O₅. No thermal events were observed in the differential thermal analysis curve for a 1: 1 CdNb₂O₆–Cd₂Nb₂O₇ mixture heated to 1100°C in air, which suggests that there are neither phase transformations in cadmium niobates, nor a eutectic within this temperature and concentration ranges. A study of the morphology of compacted samples of niobates determined specific conditions for producing dense composite ceramics, a mixture of niobates, that is suitable for using as a dielectric material.     

Reactivity of the oxides in the ternary V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CuO-α-Sb<Subscript>2</Subscript>O<Subscript>4</Subscript> system in air

In this work it has been established which compounds finally are formed in air in the two-component CuO-V₂O₅ and CuO-α-Sb₂O₄ systems. Unknown thermal properties of CuV₂O₆, Cu₂V₂O₇ and Cu₁₁V₆O₂₆ have been established. Reactivity of the oxides and phase relations in the ternary V₂O₅-CuO-α-Sb₂O₄ system in air have been studied by using XRD and DTA methods. The results have showed the reaction of V₂O₅, CuO with α-Sb₂O₄ does not produce any compound where all the three oxides would be involved. It has been established that the α-Sb₂O₄ reacts and forms binary phases independently with CuO or V₂O₅. On the base of these results the investigated system was divided into subsidiary subsystem in which CuSb₂O₆ remains at equilibrium in the solid state with other phases formed in corresponding binary systems.     

Catalytic properties of the VO<Subscript><Emphasis Type="Italic">х</Emphasis></Subscript>/Ce<Subscript>0.46</Subscript>Zr<Subscript>0.54</Subscript>O<Subscript>2</Subscript> oxide system in the oxidative dehydrogenation of propane

Ce_0.46Zr_0.54O₂ solid solution prepared using a cellulose template was employed as a carrier for vanadium catalysts of the oxidative dehydrogenation of propane. The properties of VO _х /Ce_0.46Zr_0.54O₂ catalyst (5 wt % vanadium) are compared with the properties of the neat support. The carrier and catalyst are studied by means of BET, SEM, DTA, XRD, and Raman spectroscopy. It is shown that the CeVO₄ phase responsible for the ODH process is formed upon interaction between vanadate ions and cerium ions on the surface of the solid solution. The catalytic properties of the catalyst and the support are studied in the propane oxidation reaction at temperatures of 450 and 500°C with pulse feeding of the reagent. It is found that the complete oxidation of propane occurs on the support with formation of CO₂ and H₂O. Three products (propene, CO₂, and H₂O) form in the presence of the vanadium catalyst. It is suggested that there are two types of catalytic centers on the catalyst’s surface. It is concluded that the centers responsible for the complete oxidation of propane are concentrated mainly on the carrier, while the centers responsible for propane ODH are on the CeVO₄.     

Hydroethoxycarbonylation of α-olefins at low pressure of carbon(II) oxide in the presence of the PdCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>2</Subscript>–PPh<Subscript>3</Subscript>–AlCl<Subscript>3</Subscript> system

High catalytic activity of the PdCl₂(PPh₃)₂–PPh₃–AlCl₃ system containing AlCl3 as promotor has been demonstrated in the reaction of hydroethoxycarbonylation of hexene-1 and octene-1 at low pressure of carbon(II) oxide (≤25 atm). The reaction yields linear and branched products. The optimal conditions of the process have been elaborated. The target products yield is 84.6–93.8%.     

Study of the kinetic aspects of formation of calcium monosilicate in the model system CaSO<Subscript>4</Subscript>·2H<Subscript>2</Subscript>O-Na<Subscript>2</Subscript>O·SiO<Subscript>2</Subscript>

The possibility and kinetic aspects of formation of X-ray amorphous calcium monosilicate in the model system CaSO₄·2H₂O-Na₂O·SiO₂ at room temperature were studied.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Synthesis and investigation of the heat capacity of Sm<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> in the 346–1050 K range

Optimal conditions for the synthesis of Sm₂Sn₂O₇ with pyrochlore crystal structure by solid-phase reactions were determined. The effect of temperature (346–1050 K) on the molar heat capacity of samarium stannate was studied by differential scanning calorimetry. Thermodynamic properties of Sm₂Sn₂O₇ in the temperature range under study were determined using the experimental data.