Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode waveguide, where the number of modes is equal to the number of rows building the waveguide. The strong coupling between individual waveguides leads to the proposal of an ultrashort directional coupler based on nanopillar waveguides. We present a systematic analysis of the dispersion and transmission efficiency of nanopillar photonic crystal waveguides and directional couplers. Plane wave expansion and finite difference time domain methods were used to characterize numerically nanopillar photonic crystal structures both in two- and three-dimensional spaces.     

A compact wavelength division de-multiplexer based on directional coupling of one-dimensional photonic crystal waveguides

A fundamental dual-channel wavelength division de-multiplexer (WDDM) based on directional coupling of one-dimensional photonic crystal waveguides is presented, and its transmission characteristics of the WDDM are investigated by using finite-difference time-domain method. Calculated results indicate that for this WDDM, without any structural optimization, a high transmittance of more than 95% is observed at output ports. Combining the fundamental dual-channel WDDM with flexible bends of one-dimensional photonic crystal waveguides, we construct a simple and compact four-channel WDDM. Those WDDMs are expected to be applied to highly dense photonic integrated circuits.     

1×4光子晶体波导分束器的特性

在完整的二维光子晶体中引入线缺陷,形成了光子晶体波导,光子晶体波导分束器是集成化光学电路的重要组成元件。我们设计了一种线缺陷1×4光子晶体分束器,并且用有限时域差分法研究了它的特性。研究表明,输出端的透射传输特性与入射光的波长和分支的几何形状有关,并且入射波分别相等地流入四个输出端口。为了减少1×4分束器在三个Y型分支区的反射,可以通过调节在分支区的可调介质柱的半径R,使每个输出端口具有很高的透射率。     

利用耦合波导列提高光子晶体波导辐射

将耦合波导列应用于光子晶体单模波导,提出一种提高光辐射的光子晶体结构. 基于时域有限差分方法的理论研究表明,当将耦合波导列附加到单模光子晶体波导出口端的适当位置,使出射光分成若干强弱不一的光束,这些光束在传播空间通过干涉形成一定程度的汇聚,大大提高了光子晶体波导在水平方向的光辐射效率. 另外,当耦合波导列的行数大于某固定值(2N=8)时,辐射质量基本保持不变,由此可获得最紧凑的器件结构. 这种类型光子晶体在近场光学和集成光学等诸多方面有潜在的应用价值. 关键词： 光子晶体波导 光辐射 波导列 耦合波导     

Transmission Characteristics of 90° Bent Photonic Crystal Waveguides

There are several key factors that affect the transmission characteristics of the 90° (L-shaped) bent photonic crystal waveguides. The first factor is the direct coupling efficiency from the incident lights into the waveguides. The second one is the bandgap deviations of the photonic crystals. And the third factor is the optical reflections in the bent corners. In this article, we compare three types of L-shaped bent photonic crystal waveguides. One is the original type, which has an abrupt right-angle bend. Another is an improved 90° bend with a 45°-mirror. The other is an L-shaped bent photonic crystal waveguide with a 45°-transitional section. We investigate their respective frequency responses and observe the improvements in the total transmission efficiencies provided by the latter types.     

Contra-directional coupling between two-dimensional photonic crystal waveguides

The contra-directional coupling between two photonic crystal (PC) waveguides is studied, using the finite-difference time-domain (FDTD) method. A design of contra-directional coupler is presented and its transmission properties are investigated. The device can be used as an add/drop filter. It is also shown that the coupled mode theory is suitable to study the photonic crystal waveguide coupler.     

Transmission properties of two-dimensional photonic crystal channel waveguides

We study the transmission properties of straight channel waveguides designed in a two- dimensional (2D) photonic crystal patterned into an AlGaAs heterostructure. 2D dispersion calculations show the existence of small gaps occurring along the dispersion branch of the fundamental mode. We show that their location agree very well with mini-stop bands observed on the transmission spectra.     

Slow light transmission in a photonic crystal power splitter with parallel outputs

In this paper, we investigate coupling of light to slow modes in a photonic crystal power splitter composed of a Y-junction and two 60° bends. First, a combination of two cascaded bends which is commonly used in integrated photonic crystal circuits is studied in slow light frequency regime. We propose a structure that its transmission spectrum covers the high group-index frequencies near the band edge. Also, by structural modifications, high transmission near to 95% is achieved in slow light bandwidth. Next, we study the complete structure of a photonic crystal power splitter with parallel outputs based on a Y-junction integrated with two 60° bends. Using modified bends and reducing sharpness of Y-junction, the efficiency of splitting increases in both high and low group-index frequency bands. The optimized structure has an average efficiency of 82% in slow mode regime. This structure can be used in photonic crystal based slow light devices, such as Mach-Zehnder interferometers.     

平行光子晶体波导的传输特性及应用

采用时域有限差分法研究两平行光子晶体波导的传输特性及模场分布,利用耦合模理论计算光子晶体波导的耦合系数。计算结果表明,在不同的频率范围内两平行光子晶体波导之间表现出不同的耦合特性:在高频段(0.32~0.44)(ωa/2πc)的范围内两直波导表现出相互的能量交换,实现光耦合,耦合系数随入射波 频率增加而减小;而在低频段(0.29~0.32)(ωa/2πc)的范围内,两波导的传输谱图几乎重合。最后,提出一种采用固定波导耦合长度同时实现光分束及光均分器的方案,当耦合长度取34a时,可将频率为0.333 (ωa/2πc)和 0.357(ωa/2πc)的两入射波分束传播,同时将低频段中的任意频率波进行能量均分。     

一种高双折射光子晶体光纤模场和偏振特性的研究

采用平面波展开法分析一种填入了聚甲基丙稀酸甲酯并引入大空气孔的高双折射光子晶体光纤的模场和偏振特性,并研究其结构参数变化对偏振特性的影响。研究表明这种高双折射光纤的基模模场具有较强的线偏振特性,模式双折射比普通光子晶体保偏光纤有较大提高。研究结果为光子晶体保偏光纤的开发制作提供了理论基础。     

Selective modes excitation in multimode photonic crystal waveguides

We investigate modes excitation with the input field of different positions in two-dimensional multimode photonic crystal waveguides. Odd modes can be selectively excited by the input field of odd symmetry. The input field with different positions can excite different modes due to the field intensity distribution of modes. When the input field locates at the position of the zero field, intensity of waveguide modes is zero and the modes are not excited. The finite-difference time-domain method is used to obtain the excited field distributions.     

Single mode lasers based on monolithic integration of ridge waveguides with 2D photonic crystal waveguides

The monolithic combination of active light sources with photonic crystal (PC) waveguide components is a key building block for future highly integrated photonic circuits. We demonstrate the coupling of light from an InGaAs/AlGaAs ridge waveguide laser to a monolithically integrated 2D PC waveguide. The PC guide is formed by removing three or five rows in a triangular lattice of air rods etched into the semiconductor. A tapered ridge waveguide geometry is demonstrated to improve coupling efficiency, so that maximum output powers of up to 10 mW from the PC waveguide are achieved. The resulting coupled cavity laser shows single mode emission with side mode suppression ratios > 35 dB over a broad range of injection currents.     

二维介质柱光子晶体波导吸收边界条件

设计优化了用于截断二维正方格子介质柱光子晶体波导的分布布拉格反射波导的结构.二维时域有限差分数值模拟结果显示，在上述两种波导联接处的反射系数可以在大部分光子晶体波导导波的频谱范围内降到1％以下.将这种分布布拉格反射波导和通常的吸收边界条件相结合可以构成用于光子晶体波导的吸收边界条件，其反射率可以降低到-40dB以下，吸收层的厚度可取为晶格长度的1.3倍. 关键词： 吸收边界条件 光子晶体波导 时域有限差分     

Design of tunable surface mode waveguide based on photonic crystal composite structure using organic liquid

With the method of replacing the surface layer of photonic crystal with tubes, a novel photonic crystal composite structure used as a tunable surface mode waveguide is designed. The tubes support tunable surface states. The tunable propagation capabilities of the structure are investigated by using the finite-difference time-domain. Simulation results show that the beam transmission distributions of the composite structure are sensitive to the frequency range of incident light and the surface morphology which can be modified by filling the tubes with different organic liquids. By adjusting the filler in tubes, the T-shaped, Y-shaped, and L-shaped propagations can be realized. The property can be applied to the tunable surface mode waveguide. Compared with a traditional single function photonic crystal waveguide, our designed structure not only has a small size, but also is a tunable device.     

光子晶体定向耦合三波长功分器

以二维三角晶格光子晶体为研究对象,在该光子晶体中引入两行以一行耦合介质柱为间距的平行单模线缺陷波导.通过分析和研究光子晶体波导耦合结构的耦合和解耦合特性,发现在不同频率下耦合波导的耦合长度不同.利用平面波展开法和定向耦合原理计算了在不同入射光频率下,缺陷波导间耦合波导的耦合长度,设计了一种新型超微光子晶体波导耦合型三波长功分器,实现了归一化频率分别为0.369、0.394、0.435的光波的分束效果.采用时域有限差分法验证了该功分器具有很好的功率分配效果.本文结果有助于光子晶体新型滤波器、定向耦合器、波分复用器、偏振光分束器以及光开关等光子器件的研究.     

Slight disorder effects in two dimensional photonic crystal structures

In the actual manufacturing process of photonic crystal structure, unavoidable error can generate slight disorder which may influence the performance of photonic crystal based device. In this work, randomly distributional disorders are applied to the air holes in the photonic crystal structure. Based on this, we investigate the influence of the slight disorder on the photonic crystal band structure and the performance of photonic crystal based devices (waveguide and slab cavity). The studies indicate that the slight disorder provides small influence on the band structure of the photonic crystal. But, the random disorder in photonic crystal waveguide may increase transmission loss obviously when the wavelength of the light and the distribution of disorder break the balance of multiple interferences. Also, the slight disorder can reduce the Q factor of the photonic crystal cavity at a certain degree. The studies may provide some useful guides for further photonic crystal device research.     

光子晶体耦合波导实现光开关效应的研究

提出了一种基于光子晶体耦合波导实现光开关效应的方法:将线缺陷引入二维光子晶体以形成两平行的邻近波导,两邻近波导及其中间的两排介质柱构成了光开关模型耦合区;利用平面波展开法计算了不同介质填充率情况下的色散特性.结果发现:减小介质填充率可以实现波导耦合长度的减小;分段调整中间介质柱的填充率和选择不同的耦合搭配长度,定向耦合...     

Superprism Behaviour of an Array of Photonic Crystal Waveguides

The behaviour of an array of photonic crystal waveguides is numerically investigated. It is shown that high dispersion may be achieved in the telecommunication window around 1550 nm, with a device whose dimensions are in the order of half a mm².     

飞秒激光加工铌酸锂晶体：原理与应用

由于具有超短的脉冲宽度和极高的峰值强度，飞秒激光微加工是一种有效的材料加工方法， 已广泛应用于光子集成器件的加工。铌酸锂晶体具有优异的电光、非线性光学和压电特性，是集成 光学和导波光学中常见的材料。本文综述了飞秒激光对铌酸锂晶体的处理，重点介绍了飞秒激光加 工的物理原理及其制备的铌酸锂基光子器件的最新进展。飞秒激光技术使铌酸锂晶体在微纳光子学 领域具有广阔的应用前景。     

基于磁光子晶体的低损耗窄带THz滤波器

本文提出一种采用石榴石型铁氧体磁性材料的太赫兹滤波器,利用波导线缺陷和腔内点缺陷的耦合特性,通过改变腔内介质柱半径及分布,实现对某个波长的耦合,达到了高效率滤波的功能;改变外磁场的大小,影响铁氧体材料的磁导率变化,使谐振频率发生改变,从而对THz波进行滤波.应用平面波展开法(PWM)和时域差分有限法(FDTD)进行仿真分析,研究结果表明,该滤波器其插入损耗为0.0997 d B,3 d B带宽为8.22 GHz,实现了低损耗窄带滤波.