双钙钛矿型Ba2SmSbO6的水热合成和结构表征

在温和水热条件下合成了双钙钛矿型Ba2SmSbO6,通过XRD,IR,ICP,XPS,VSM和121SbMöss-bauer谱对产物的物相、结构、锑离子价态和磁化率等进行了表征.Ba2SmSbO6具有立方钙钛矿结构,Fm3m空间群,晶胞参数a=0.85097(20)nm,V=0.61623(20)nm,Sm和Sb离子呈岩盐型有序排列,锑为+5价.     

Ba2InSbO6双钙钛矿的水热合成及 121Sb M?ssbauer谱表征

在温和水热条件下,合成了双钙钛矿型Ba₂InSbO₆,采用XRD、TEM、XPS、ICP及IR等技术表征产物的结构及组成。XRD数据的Rietveld拟合结果表明,Ba₂InSbO₆为a=0.416 782(13) nm的立方钙钛矿结构,属于Pm3m。 ¹²¹Sb M?ssbauer谱测试表明,产物的同质异能移可归属为Sb^Ⅴ及Sb-O键具有明显的共价特征。合成条件的研究表明,Sb源对合成具有重要影响,且Sb₂O₃锑源可有效地降低杂质的生成。     

水合石榴石Sr3Fe2(OH)12的温和水热合成与Mössbauer谱研究

在温和水热体系中合成出单相水合石榴石Sr3Fe2(OH)12.产物在573 K左右经历快速的与Sr最近邻的OH-断裂与分解过程,在空气或氧气中焙烧出现从Fe(Ⅲ)到Fe(Ⅳ)的氧化.骨架Fe离子价态变化直接决定分解过程及产物的结构类型.采用M(o)ssbauer谱联用XPS法测出sr-Fe水合石榴石品格中存在2种八面体Fe(OH)6.     

过渡金属掺杂的双钙钛矿Ba2InNbO6的光催化分解水性能研究

双钙钛矿材料由于其丰富的化学组成及晶体结构被认为是一类优良的光催化材料,但大多数双钙钛矿氧化物仅表现出紫外光催化活性。因此,本文通过过渡金属离子Fe、Cr、Ni等掺杂调控双钙钛矿化合物Ba2InNbO6的能带结构,期望实现高效的可见光催化活性,并研究掺杂元素对晶体结构、微观形貌、表面状态等物化性质的影响。结果表明,过渡金属能够成功地引入到双钙钛矿的Ba2InNbO6的In位点,并能拓宽材料的可见光吸收范围。此外,过渡金属引入晶胞发生收缩,颗粒尺寸增大,表面亲水性也得到了极大的改善。与Ba2InNbO6相比,过渡金属掺杂的样品光催化析氢活性得到了极大的改善。其中,Ba2In0.9Fe0.1NbO6在全范围照射(λ≥250 nm)下的析氢量最高,达到了15.8μmol,并且在可见光(λ≥420 nm)照射下的析氢速率为2.71μmol/h,其对应的表观量子效率为0.016%。     

类钙钛矿新铌酸盐Ba5LaTi2Nb3O18的合成、结构与介电特性

为满足现代通信技术小型化、集成化与高可靠性的迫切要求,探索具有高介电常数、低介电损耗与低温度系数的微波介电材料引起了材料科学、化学、物理和电子科学等领域科学工作者的广泛关注,并已开发出复合钙钛矿结构的Ba(Mg1/3Ta2/3)O3、Ba(Zn1/3Ta2/3)O3和钨青铜结构的Ba6-3xLn8+2x·Ti18O54及Ba2Ti9O20等实用化的高性能材料[1～7].这类材料均由氧八面体共顶连接,而且氧八面体内(B位)、外(A位)阳离子比例等于或略大于1,由此,我们推测在B位与A位阳离子比例略小于1的类钙钛矿结构中也极有可能存在具有优良介电性能的新材料,因此对通式为AnBn-1O3n(n=5,6,7,8)的系列新化合物进行了系统的合成、结构与介电性能研究[8,9].本文报道在BaO-La2O3-TiO2-Nb2O5体系中合成的具有5层类钙钛矿结构的新铌酸盐Ba5LaTi2Nb3O18,发现该材料具有较好的介电性能.     

用于X射线成像板的Ba_7F_(12)Cl_2:Eu~(2+)水热合成及其表征

X射线成像板的成像性能很大程度上取决于存储荧光粉材料的物理化学性能。本文采用水热制备方法,以BaCl2、EuBr2、NaBF4为反应原料,以乙二胺四乙酸(EDTA)为辅助剂制备了Ba7F12Cl2:Eu2+荧光粉。利用X射线粉末衍射(XRD)、场发射扫描电镜(SEM)、X射线能量损失谱(EDS)、拉曼光谱(Raman)、荧光光谱(PL)等对制备的Ba7F12Cl2:Eu2+进行了表征。根据反应条件对产物的影响,初步提出了产物的形成过程。结果表明:反应温度及EDTA用量对产物物相和形貌有显著影响;制备的Ba7F12Cl2:Eu2+荧光粉有较好的发光性能。     

Sb_2Te_3纳米片的水热合成与表征

在水热条件下,以乙醇胺为还原剂,实现了亚碲酸根(TeO~(2-)_3)的分步还原,并以新生成的单质Te纳米棒为碲源,原位一步法合成出六方相Sb_2Te_3纳米片.采用X射线粉末衍射仪(XRD)、场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)等对产物的物相、形貌及组成进行了表征.结果表明,产物Sb_2Te_3为六方纳米片,厚度约为100~200 nm,直径约为0.6~1.5μm,形貌均一,分散性良好.适宜的合成条件是水/乙醇胺体积比为8∶12,180℃下反应24 h.依据部分实验结果以及单质Te和六方相Sb_2Te_3晶体结构的比较,证明了Sb_2Te_3主要以外延方式在单质Te纳米棒表面生长,且两者的晶面取向为(003)Te//(003)Sb_2Te_3,[110]Te//[110]Sb_2Te_3.     

Ba2SbInO6双钙钛矿的水热合成和表征

利用水热晶化法制备了Ba₂SbInO₆纯相，并通过XRD、SEM、IR、XPS和ICP等方法，对产物的物相、形貌、结构和组成进行了表征。初步结构表征结果表明，产物可能为B位离子无序排列的立方钙钛矿结构，空间群为Pm3m，晶胞参数为a=0.4132 mm。产物粉末呈现立方晶型，粒度约为0.5～2 μm。     

选择性合成不同形貌的Sb2S3纳米结构应用于高性能的染料敏化太阳能电池（英文）

近几十年来,随着全球变暖和能源危机的日益严重,对取之不尽、用之不竭的清洁能源技术的需求越来越迫切.1991年Gratzel首次报道了染料敏化太阳能电池(DSSCs),它以低廉的价格、优异的理论功率转换效率(PCE)、环保、多色透明等优点而引起了研究者的关注.Sb2S3因其1.5-2.2 eV的间隙宽度被认为是最有前途的对电极材料之一.此外,Sb2S3是地球中含量丰富的无毒锑矿物的主要成分,还被广泛应用于太阳能转换材料、催化剂、光导探测器等领域.众所周知,石墨烯具有巨大的比表面积、显著的载流子迁移率和优异的热/化学稳定性,这使得提高电子转移效率和电催化活性成为可能.首先,采用改进的Hummers方法制备了氧化石墨烯纳米片;然后采用水热法通过改变Sb源以及实验pH值,合成了Sb2S3和Sb2S3@RGO样品.对样品进行X射线粉末衍射(XRD)、扫描电子显微镜镜(SEM)、投射电子显微镜(TEM)以及比表面积表征.结果表明,在Sb源不变的情况下,Sb2S3样品的形貌随pH值的变化而变化.以三乙酸锑为Sb源,在pH=3时,Sb2S3的形貌类似于一个完整的纳米棒结构;在pH值为6时,样品为不规则球体;当pH值为8时,纳米片结构开始出现;但当p H=10时,纳米片结构并不均匀.根据XRD分析,只有当pH值为3时,样品的衍射峰才与标准卡(JCPDS42-1393)的衍射峰一致.当以氯化锑作为锑源,样品的形貌由不规则的杆状(pH=3)转变为纳米球(pH=6),然后出现纳米片结构(pH=8).不同的是,当p H值为10时,纳米薄片形成均一的花状结构.XRD结果表明,除pH值为3外,样品的衍射峰与标准卡(JCPDS42-1393)的值吻合较好.结果表明,合成条件所需的Sb源和碱性环境是合成具有均匀花状结构的纳米片状Sb2S3所必不可少的.测得Sb2S3的比表面积约为41.72 m^2g^-1,平均孔径为31.08nm,Sb2S3@RGO的分别为44.53 m^2g^-1和22.65 nm.Sb2S3和Sb2S3@RGO复合材料均具有介孔结构,为内部电催化剂提供了广阔的通道,从而提高了对电极的催化能力,促进了电化学反应.将Sb2S3纳米花球和Sb2S3@RGO纳米薄片作为染料敏化太阳能电池的对电极进行了测试,由于石墨烯的引入,后者比前者具有更好的电催化性能.电化学实验结果表明,与Sb2S3,RGO,Pt作为对电极相比,制备的Sb2S3@RGO纳米薄片具有更好的催化活性、电荷转移能力和电化学稳定性,Sb2S3@RGO的功率转换效率达到8.17%,优于标准Pt对电极(7.75%).     

超分子化合物{[2-(4-chlorophenyl)benzimidazoleH]_2~(2+)·[SbCl_5]~(2-)}_n的水热合成、晶体结构及荧光性质

采用水热法合成了一种新的超分子化合物{[2-(4-chlorophenyl)benzimidazoleH]22+.[SbCl5]2-}n.通过元素分析、红外光谱、荧光光谱及X射线单晶衍射对其结构和性质进行了测定.结构分析表明;该晶体属于单斜晶系,P21/c空间群,晶胞参数为:a=0.583 0(9)nm,b=1.612 5(3)nm,c=1.616 3(3)nm,β=94.181(2)°,Z=2,化学式为C26H20Cl7N4Sb,Mr=758.36,V=1.515 5(4)nm3,Dc=1.662 g.cm-3,μ=1.551 mm-1,F(000)=748,R1=0.089 1,wR2=0.256 8.Sb3+与其周围6个氯离子配位,构成一个6配位的畸变八面体构型,配阴离子与2-(4-氯苯基)苯并咪唑阳离子以静电引力、氢键及π-π堆积作用形成三维网状超分子化合物.荧光测试显示该化合物具有较好的光致发光性能.     

Sulfosalts with alkaline earth metals. Centrosymmetric vs acentric interplay in Ba3Sb4.66S10 and Ba2.62Pb1.38Sb4S10 based on the Ba/Pb/Sb ratio. Phases related to arsenosulfide minerals of the rathite group and the novel polysulfide Sr6Sb6S17

The new compounds, Sr6Sb6S17, Ba2.62Pb1.38Sb4S10, and Ba3Sb4.66S10 were prepared by the molten polychalcogenide salt method. Sr6Sb6S17 crystallizes in the orthorhombic space group P2(1)2(1)2(1) with a = 8.2871(9) A, b = 15.352(2) A, c = 22.873(3) A, and Z = 4. This compound presents a new structure type composed of [Sb3S7]5- units and trisulfide groups, (S3)2-, held together by Sr2+ ions. The [Sb3S7]5- fragment is formed from three corner-sharing SbS3 trigonal pyramids. The trisulfide groups are separated from the [Sb3S7]5- unit and embedded between the Sr2+ ions. Ba3Sb4.66S10 and Ba2.62Pb1.38Sb4S10 are not isostructural but are closely related to the known mineral sulfosalts of the rathite group. Ba3Sb4.67S10 is monoclinic P2(1)/c with a = 8.955(2) A, b = 8.225(2) A, c = 26.756(5) A, beta = 100.29(3) degrees, and Z = 4. Ba2.62Pb1.38Sb4S10 is monoclinic P2(1) with a = 8.8402(2) A, b = 8.2038(2) A, c = 26.7623(6) A, beta = 99.488(1) degrees, and Z = 4. The Sb atoms are stabilized in SbS3 trigonal pyramids that share corners to build ribbonlike slabs, which are stitched by Ba/Pb atoms to form layers perpendicular to the c-axis. These materials are semiconductors and show optical band gaps of 2.10, 2.14, and 1.64 eV for Sr6Sb6S17, Ba3Sb4.66S10, and Ba2.62Pb1.38Sb4S10, respectively. Raman spectroscopic characterization is reported. Sr6Sb6S17, Ba3Sb4.66S10, and Ba2.62Pb1.38Sb4S10 melt congruently at 729, 770, and 749 degrees C, respectively.     

Synthesis and Structure of Ba(2)Sn(3)Sb(6), a Zintl Phase Containing Channels and Chains

The new Zintl phase dibarium tritin hexaantimonide, Ba(2)Sn(3)Sb(6) has been synthesized, and its structure has been determined by single-crystal X-ray diffraction methods. It crystallizes in the orthorhombic space group -Pnma with a = 13.351(1) ?, b = 4.4100(5) ?, c = 24.449(3) ?, and Z = 4 (T = -50 degrees C). The structure of Ba(2)Sn(3)Sb(6) comprises large channels [010] defined by 30-membered rings constructed from an anionic framework. This framework is built up from Sn-centered trigonal pyramids and tetrahedra, as well as zigzag chains of Sb atoms. Within the channels reside the Ba(2+) cations and additional isolated zigzag Sb-Sb chains. The simultaneous presence of Sn trigonal pyramids and tetrahedra implies that Ba(2)Sn(3)Sb(6) is a mixed-valence compound whose oxidation state notation can be best represented as (Ba(2+))(2)[(Sn(II))(2)(Sn(IV))(Sb(-)(III))(3)(Sb(-)(I))](2)(-)[(Sb(-)(I))(2)](2)(-).     

生物分子辅助溶剂热合成硫化锑纳米棒

以SbCl3和L-胱氨酸为反应原料,采用溶剂热法在170℃反应12h,制得硫化锑(Sb2S3)纳米棒.X射线衍射(XRD)、能量分散光谱(EDS)和X射线光电子能谱(XPS)研究表明所得产物为典型的Sb2S3正交结构.场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)研究显示,Sb2S3纳米棒长为3～6μm,平均直径约为150nm.讨论了不同反应时间对Sb2S3的形成及其形貌的影响,并根据实验结果对所合成的一维纳米棒可能的形成机理进行了简单的探讨.     

Syntheses, crystal and electronic structures, and characterizations of quaternary antiferromagnetic sulfides: Ba2MFeS5 (M = Sb, Bi)

Two new quaternary sulfides, Ba(2)SbFeS(5) and Ba(2)BiFeS(5), were synthesized by using a conventional high-temperature solid-state reaction method in closed silica tubes at 1123 K. The two compounds both crystallize in the orthorhombic space group Pnma with a = 12.128(6) ?, b = 8.852(4) ?, c = 8.917(4) ?, and Z = 4 for Ba(2)SbFeS(5) and a = 12.121(5) ?, b = 8.913(4) ?, c = 8.837(4) ?, and Z = 4 for Ba(2)BiFeS(5). The crystal structure unit can be viewed as an infinite one-dimensional edge-shared MS(5) (M = Sb, Bi) tetragonal-pyramid chain with FeS(4) tetrahedra alternately arranged on two sides of the MS(5) polyhedral chain via edge-sharing (so the chain can also be written as (1)(∞)[MFeS(5)](4-)). Interestingly, the compounds have the structural type of a Ba(3)FeS(5) high-pressure phase considering one Ba(2+) is replaced by one Sb(3+)/Bi(3+), with Fe(4+) reduced to Fe(3+) for in order to maintain the electroneutrality of the system. As a result, the isolated iron ions in Ba(3)FeS(5) are bridged by intermediate MS polyhedra in Ba(2)MFeS(5) (M = Sb, Bi) compounds and form the (1)(∞)[MFeS(5)](4-) chain structure. This atom substitution of Ba(2+) by one Sb(3+)/Bi(3+) leads to a magnetic transition from paramagnetic Ba(3)FeS(5) to antiferromagnetic Ba(2)MFeS(5), resulting from an electron-exchange interaction of the iron ions between inter- or intrachains. Magnetic property measurements indicate that the two compounds are both antiferromagnetic materials with Ne?el temperatures of 13 and 35 K for Ba(2)SbFeS(5) and Ba(2)BiFeS(5), respectively. First-principles electronic structure calculations based on density functional theory show that the two compounds are both indirect-band semiconductors with band gaps of 0.93 and 1.22 eV for Ba(2)SbFeS(5) and Ba(2)BiFeS(5), respectively.     

Hydrotherrnal synthesis, structure and property of nano-BaTiO3-based dielectric materials

A series of Ba1-xSrxTi1-yZryO3 (0≤x≤0.5, 0≤y≤0.4) and Ba1-xZnxTi1-ySnyO3 (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by Iow-temperature/Iow-pressure hydrothermal method below 170℃, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO3. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr2+ and Zr4+ or Zn2+ and Sn4+ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO3 phase at room temperature.     

Synthesis and characterization of Al doped δ-laminar crystal sodium silicate

An modified laminar crystal sodium silicate(Al-SKS-6)was synthesized by spray drying and high temperature crystallization using sodium silicate as silicon source,Al atom as inorganic source and hexadecyltrimethy ammomum bromide(CTMAB)as the structure template.The hydrothermal stability of product was at least 1 h.The synthesized material was characterized by XRD and SEM.The results indicated that shape and intensity of XRD diffraction peak at 20 took changes.but raw material δ phase crystal form kept unchanged.and assured high Ca2+ and Mg2+ binding capacity of the products.The Ca2+ and Mg2+ binding capacity of product is up to 380 mg Ca/g and 410mg Mg/g respectively.It was found that the hole of product became smaller and appeared rod structure based on SEM. The hydrothermal stability was increased due to the pillaring of A1 atom.     

A facile hydrothermal method to BiSbO4 nanoplates with superior photocatalytic performance for benzene and 4-chlorophenol degradations

BiSbO(4) nanoplates with a large BET specific area has been prepared successfully via a facile hydrothermal reaction from Sb(2)O(3) and Bi(NO(3))(3). The effects of reaction conditions and the precursors on the final products were investigated. It is proposed that the redox reaction between Sb(2)O(3) and Bi(NO(3))(3) plays a pivotal role in the formation of nanocrystalline BiSbO(4). The hydrothermally prepared nanocrystalline BiSbO(4) was characterized by X-ray diffraction (XRD), N(2)-sorption BET surface area, UV-vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The DRS result clarifies that BiSbO(4), originally believed to be a visible light responsive photocatalyst, is indeed UV light responsive with a band gap of 3.5 eV. The existence of Bi containing an impurity may be responsible for the visible light response of BiSbO(4) prepared via a conventional solid state reaction. BiSbO(4) nanoplates prepared via the hydrothermal method showed superior photocatalytic performance for the degradation of benzene and 4-chlorophenol (4-CP) as compared to BiSbO(4) prepared via a solid state reaction and Degussa P25. BiSbO(4(Hy)) nanoplates can be a promising photocatalyst in the treatment of environmental pollution.     

半水榴石型化合物Sr_6Sb_4M_3O_(14)(OH)_(10)(M=Co,Mn)的合成、结构与性质

在强碱性水热条件下合成了两种新化合物Sr6Sb4Co3O14(OH)10(SSC)与Sr6Sb4Mn3O14(OH)10(SSM).采用粉末X射线衍射数据,通过Rietveld方法进行了结构分析,讨论了金属离子的拓扑结构.两种化合物均为石榴石-水榴石相关结构,空间群I43d,晶胞参数a分别为1.30634(2)nm(SSC)和1.31367(1)nm(SSM).结构中,SbO6八面体与MO4(M=Co,Mn)四面体共顶点连接,Sb5+-M2+(M=Co,Mn)离子表现为ctn即C3N4型的拓扑结构.拓扑结构中,Sb5+为三连接,过渡金属离子M2+(M=Co,Mn)为四连接.Sb5+离子的拓扑结构为体心立方,而M2+(M=Co,Mn)分布呈类风扇状,相互连接形成thp型拓扑结构(即Th3P4中Th原子之间连接关系).过渡金属离子的分布与化合物表现出的磁性质密切相关,Co2+(Mn2+)间存在反铁磁相互作用.Sr6Sb4Co3O14(OH)10在低温下表现出反铁磁倾斜有序.Sr6Sb4Co3O14(OH)10和Sr6Sb4Mn3O14(OH)10在高温下发生分解,产物主相为双钙钛矿Sr2(Sb,M)2O6(M=Co,Mn).