Preparation and characterization of soluble terpolymers from m‐phenylenediamine,o‐anisidine,and 2,3‐xylidine

A series of terpolymers were synthesized by the chemical oxidative polymerization of m‐phenylenediamine (MPD), o‐anisidine (AS), and 2,3‐xylidine (XY) in hydrochloride aqueous medium. The yield, intrinsic viscosity, and solubility of the terpolymers were studied by changing the MPD/AS/XY molar ratio from 100/0/0 to 53/39/8 to 0/100/0. It was discovered that the MPD/AS/XY terpolymers exhibit a higher polymerization yield and better solubility than MPD/AS and MPD/XY bipolymers having the same MPD molar content. The as‐prepared MPD/AS/XY terpolymer bases were characterized by Fourier transform infrared, ultraviolet–visible, ¹H NMR, and high‐resolution solid‐state ¹³C NMR spectroscopies; wide‐angle X‐ray diffraction; and thermogravimetry. The results suggested that the oxidative polymerization from MPD, AS, and XY is exothermic, and the resulting terpolymers are more easily soluble in some organic solvents than MPD homopolymer. The copolymer obtained was a real terpolymer containing MPD, AS, and XY units, and the actual MPD/AS/XY molar ratio calculated by solid‐state ¹³C NMR spectra of the polymers is very close to the feed ratio, although the AS content calculated on the basis of the ¹H NMR spectrum of the soluble part of the polymer is higher than the feed AS content. The terpolymers and MPD homopolymer exhibit a higher polymerization yield and much higher intrinsic viscosity and are more amorphous than the AS homopolymer. At a fixed MPD content of 70 mol %, the terpolymers exhibit an increased thermostability and activation energy of the major degradation in nitrogen and air with an increasing AS content. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3989–4000, 2001     

13Carbon nuclear magnetic resonance of ethylene–propylene–1‐decene terpolymers

Many studies have been reported on the ¹³C NMR characterization of ethylene–α‐olefin copolymers, but only a few have been reported on terpolymers. The incorporation of an α‐olefin into the polyethylene chain changes the structure and, consequently, the properties of the polymer obtained. Looking for new products, we obtained a series of ethylene–propylene–1‐decene terpolymers with the metallocenic system rac‐ethylene bisindenyl zirconium dichloride/methylaluminoxane. We performed a complete ¹³C NMR characterization of these terpolymers qualitatively and quantitatively. Here we present a detailed study of the ¹³C NMR chemical shifts, triad sequence distributions, monomer average sequence lengths, and reactivity ratios for these terpolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2531–2541, 2003     

庚烯-1单体单元对胆甾型侧链液晶共聚砜热转变温度的调节

合成并用红外光谱法、核磁共振法和高效凝胶渗透色谱法表征了胆甾（烷）醇十一碳烯酸酯分别与庚烯 １、二氧化硫进行自由基共聚合得到的一系列不同组成的三元胆甾型侧链液晶共聚砜，用温控式偏振光显微镜观测了产物的液晶性能．结果表明：随庚烯 １单体单元组份含量的增加，该三元共聚砜的液晶相转变温度均降低，采用庚烯 １单体参与共聚的方法可以有效地调节胆甾型侧链液晶共聚砜的热转变温度．     

Polymerization with TMA-protected polar vinyl comonomers. I. Catalyzed by group 4 metal complexes with η5-type ligands

This paper describes the use of several kinds of group IV Cp based catalyst systems, in the synthesis of co- and terpolymers of ethylene, propylene and α-olefins endowed with OH and COOH functional groups. The hydroxy monomers used were 5-hexen-1-ol (4) and 10-undecen-1-ol (5) and the carboxy monomer was 10-undecen-1-oic acid (6). The three catalyst systems used were the C₂ symmetric ansa-zirconocene (1) the “in-site” titanium complex (2) and the non-rigid zirconocene (3), all activated by methylaluminoxane. Trimethylaluminium was used to protect the functional group of polar monomers. The first two catalyst systems suffer similar activity loss in the presence of polar monomer whereas the third one exhibited better tolerance toward the hydroxyolefins. NMR and FTIR spectroscopies were used to characterize the polymerization products. All three catalyst systems afforded functionalized co- and terpolymers by direct polymerization of ethylene/propylene/hydroxy-α-olefins but only the catalyst system (1)/MAO displays appreciable activities for direct polymerization of ethylene, propylene and carboxy-α-olefins. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2457–2469, 1999     

Sequence Control in Asymmetric Terpolymerizations of meso-Epoxides,CO2, and Phthalic Anhydride: Unprecedented Statistical Ester–Carbonate Distributions

The statistical terpolymerization of epoxides, CO₂ and cyclic anhydrides remains challenging, mainly because epoxide/CO₂ and epoxide/anhydride copolymerizations typically proceed at considerably different rates. Herein, we report the syntheses of novel chiral terpolymers with unprecedented statistical distributions of carbonate and ester units (up to 50 % junction units) via the one-pot reaction of cyclohexene oxide, phthalic anhydride, and CO₂ under mild conditions using enantiopure bimetallic aluminum-complex-based catalyst systems. Notably, all resulting terpolymers exhibited excellent enantioselectivities (≥96 % ee) that were independent of the carbonate–ester distribution. The statistical compositions of the carbonate and ester units in the resulting terpolymers were determined via ¹H and ¹³C NMR spectroscopies. Furthermore, thermal properties were tuned by altering the ester content of the chiral terpolymer without influencing the enantioselective ring-opening step involving the meso-epoxide. This asymmetric terpolymerization methodology is also compatible with a variety of meso-epoxides to afford the corresponding terpolymers with 17 %–25 % junction units and excellent enantioselectivities (94 %–99 % ee). The present study is expected to provide new guidelines for preparing a broad range of biodegradable polymers with excellent enantioselectivities and adjustable properties.     

Butene concentration prediction in ethylene/propylene/1-butene terpolymers by FT-IR spectroscopy through multivariate statistical analysis and artificial neural networks

This paper reports the development of calibration models for quality control in the production of ethylene/propylene/1-butene terpolymers by the use of multivariate tools and FT-IR spectroscopy.1-Butene concentration prediction is achieved in terpolymers by coupling FT-IR spectroscopy to multivariate regression tools. A dataset of 26 terpolymers (14 coming from a constrained experimental design for mixtures, plus 12 terpolymers used for external validation) was analysed by FT-IR spectroscopy. An internal method of “Polimeri Europa” plant, based on ¹³C NMR spectroscopy is used to determine the percentage of 1-butene in the samples. Then, different multivariate tools are used for 1-butene concentration prediction based on the FT-IR spectra recorded. Different multivariate calibration methods were explored: principal component regression (PCR), partial least squares (PLS), stepwise OLS regression (SWR) and artificial neural networks (ANNs). The model obtained by back-propagation neural networks turned out to be the best one. The performances of the BP-ANN model were further improved by variable selection procedures based on the calculation of the first derivative of the network.The proposed approach allows the monitoring in real time of the polymer synthesis and the estimation of the characteristics of the product attainable from the concentration of 1-butene.     

In the twilight zone between [2]pseudorotaxanes and [2]rotaxanes

A [2]pseudorotaxane, based on a semi-dumbbell-shaped component containing asymmetrically substituted monopyrrolotetrathiafulvalene and 1,5-dioxynaphthalene recognition sites for encirclement by cyclobis(paraquat-p-phenylene) and with a "speed bump" in the form of a thiomethyl group situated between the two recognition sites, has been self-assembled. This supramolecular entity is a mixture in solution of two slowly interconverting [2]pseudorotaxanes, one of which is on the verge of being a [2]rotaxane at room temperature, allowing it to be isolated by employing flash column chromatography. These two [2]pseudorotaxanes were both characterized in solution by UV/Vis and (1)H NMR spectroscopies (1D and 2D) and also by differential pulse voltammetry. The spectroscopic and electrochemical data reveal that one of the complexes behaves wholly as a [2]pseudorotaxane, while the other has some [2]rotaxane character to it. The kinetics of the shuttling of cyclobis(paraquat-p-phenylene) between the monopyrrolotetrathiafulvalene and the 1,5-dioxynaphthalene recognition sites have been investigated at different temperatures. The shuttling processes, which are accompanied by detectable color changes, can be monitored using UV/Vis and (1)H NMR spectroscopies; the spectroscopic data have been employed in the determination of the rate constants, free energies of activation, enthalpies of activation, and the entropies of activation for the translation of cyclobis(paraquat-p-phenylene) between the two recognition sites.     

Nuclear magnetic resonance studies on microstructure of ethylene copolymers. VII. Proton resonance spectra of hydrolyzed ethylene–vinyl acetate copolymers1

Complete and partial alcoholyses of ethylene–vinyl acetate (E–VA) copolymers yield ethylene–vinyl alcohol (E–VOH) copolymers and ethylene–vinyl acetate–vinyl alcohol (E–VA–VOH) terpolymers, respectively. From the 220-MHz proton NMR spectra of E–VOH copolymers the stereoregular and chemical sequence distributions of the comonomers can be readily determined. Partially hydrolyzed E–VA polymers were acetylated with perdeuterated acetic anhydride. The monomer distributions in the terpolymers were then quantitatively determined by examining the proton spectra of the derived products. It was found that alcoholysis of E–VA polymers occurs preferentially at VA units which have neighboring VA groups.     

A chiral molecular square with metallo-corners for enantioselective sensing

A family of chiral molecular squares based on fac-Re(CO)3Cl metallocorners and enantiopure atropisomeric bipyridine bridging ligands (L1-4) have been synthesized in high yields by refluxing ClRe(CO)5 and L1-4 in 1:1 molar ratio. These novel chiral metallocycles have been characterized by 1H and 13C{1H} NMR, UV-vis, luminescence, and circular dichroism (CD) spectroscopies, FAB mass spectrometry, and microanalysis. Molecular square 4 which contains four 1,1'-bi-2-naphthol functionalities exhibits interesting enantioselective luminescence quenching by 2-amino-1-propanol. This research illustrates the potential of generating novel functional materials based on supramolecular chemistry.     

聚乙交酯-丙交酯-己内酯三元无规共聚物及其电纺膜的制备与表征

以左旋丙交酯、乙交酯和己内酯为原料,辛酸亚锡为催化剂,在真空条件下经本体熔融开环聚合,制备了三元无规共聚物(P),其结构和性能经1H NMR,IR,DSC和粘度表征。实验结果表明:P的玻璃化转变温度可通过单体的投料比调控;采用静电纺丝法可方便地获得共聚物亚微米纤维膜。     

Proton conduction in nanopores of sol–gel-derived porous glasses and thin films

Nanoporous glasses and nanoporous thin films were prepared using sol–gel method, and proton conductivities in nanopores of sol–gel-derived porous glasses and thin films are overviewed in this paper. Proton motions inside nanopores were monitored by impedance and nuclear magnetic resonance (NMR) spectroscopies. The impedance data is correlated with the proton motion in bulk scale, whereas NMR data is correlated with that in nanometer scale, respectively. From the comparison of the activation energies obtained from impedance and NMR spectroscopies, percolation of proton conducting path and its relation to the amount of absorbed water molecules are shown. In the case of nanoporous thin films, directions of pores can be controlled by using cationic and non-ionic surfactants. Relationship between direction of pores and proton conductivity is discussed based on impedance test results.     

Terpolymerization of Cyclic Ethers with Cyclic Anhydride

Abstract

A unique solution polymerization and polymer family have been discovered in the ring-opening terpolymerization of three heterocyclic monomers initiated by organometallic compounds, particularly trialkylaluminum. The products have repeating ether-ester-ester linkages along the chain and are alternating terpolymers, … ABCABCABC…, of three different monomers A, B, and C. Monomer A is a four- or five-membered cyclic oxide, such as tetrahydro-furan or oxocylobutane (oxetane). Monomer B is an epox-ide, and Monomer C is a cyclic acid anhydride. Many epoxides and anhydrides participate in the polymerization which enables the preparation of alternating terpolymers containing various substituents and unsaturatlons at regu-lar intervals along the chain. The alternating sequence can be near-perfect or less so depending on the initial monomer charge ratio. Evidence of the alternating struc-ture was obtained by chemical and NMR analyses of polymer sampled at intermediate and final conversions, and by glass transition temperatures.     

Water-soluble polymers. 71. pH responsive behavior of terpolymers of sodium acrylate,acrylamide, and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio)butanoate

Terpolymers of sodium acrylate (NaA), acrylamide (AM), and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio) butanoate (AMPDAB) were prepared by the free radical polymerization in 0.5M NaBr aqueous solution using potassium persulfate as the initiator. The feed ratio of AMPDAB : NaA : AM was varied from 5 : 5 : 90 to 40 : 40 : 20 mol %, with the total monomer concentration held constant at 0.45M. Terpolymer compositions were determined by ¹³C NMR. Molecular weights varied from 3.0 × 10⁵ to 9.7 × 10⁶ g/mol. All terpolymers were soluble in deionized water and salt solutions at all pH values. The dilute and semidilute solution behavior of the terpolymers was studied as a function of composition, pH, and added electrolytes. Polyelectrolyte behavior was observed for all terpolymers at pH 8.5, as evidenced by high viscosity values at low polymer concentrations and viscosity decrease in the presence of added electrolytes. The reduced viscosity as a function of decreasing pH exhibits a minimum as the terpolymer undergoes a polyanion/polyzwitterion/polycation transition. Comparison of the solution behavior of the terpolymers to terpolymers of 3-(2-acrylamido-2-methylpropane dimethylammonio)-1-propane sulfonate (AMPDAPS), AM, and NaA (AADAPS series) as well as copolymers of AMPDAB and AM (AMPDAB series) have been made. © 1997 John Wiley & Sons, Inc.     

乙烯-醋酸乙烯酯-乙烯醇三元共聚物性质的研究

以乙烯-醋酸乙烯酯共聚物(EVA)为原料,通过控制VA的水解程度制得一系列不同组成的乙烯-醋酸乙烯酯-乙烯醇三元共聚物.研究表明:随水解程度的增加共聚物的结晶性越来越好.在一定水解度范围内共聚物具有良好的综合力学性能,是一种新型的热塑性弹性体.     

Communication in platinum ethynylchalcogenophenes

A series of alkynylchalcogenophene platinum(II) complexes have been synthesized and characterized by multinuclear NMR and UV-visible absorption spectroscopies; the NMR spectra show unprecedented long-range heteronuclear coupling, and clear correlations emerge between spectroscopic data and theoretical analysis of their electronic structures.     

Synthesis,characterization and modeling of ABC triblock terpolymers: the effect of block sequence

Four equimolar terpolymers comprising ten units from each of the monomers methoxy hexa(ethylene glycol) methacrylate (HEGMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) were prepared by group transfer polymerization (GTP), and characterized by gel permeation chromatography (GPC) and proton nuclear magnetic resonance (¹H NMR) spectroscopy to confirm size homogeneity and composition. These terpolymers were the three block sequence isomers, ABC, BAG and ACB, as well as the statistical isomer. Aqueous solutions of the terpolymers were characterized by dynamic light scattering and turbidimetry to determine the hydrodynamic sizes and cloud points. The results indicated micelle formation in the triblocks, and absence of micellization with the statistical terpolymer. In general, a strong dependence of the hydrodynamic size and cloud point on polymer architecture was observed. Monte Carlo simulations on non-aggregating isomeric terpolymers of similar structure also showed a strong dependence of the radius of gyration on polymer architecture.     

Stimuli‐responsive ampholytic terpolymers of N‐acryloyl‐valine,acrylamide, and (3‐acrylamidopropyl)trimethylammonium chloride: Synthesis,characterization, and solution properties

Low‐charge density ampholytic terpolymers composed of acrylamide (AM), (3‐acrylamidopropyl)trimethyl ammonium chloride (APTAC), and N‐acryloyl‐valine were prepared via free‐radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution (MWD). Terpolymer compositions were determined by ¹³C NMR spectroscopy. Terpolymer molecular weights (MWs) and polydispersity indices (PDIs) were obtained via size exclusion chromatography/multi‐angle laser light scattering (SEC‐MALLS). Intrinsic viscosity values determined from SEC‐MALLS data using the Flory–Fox relationship were compared with those determined by low‐shear dilute solution viscometry and found to be in good agreement. SEC‐MALLS experiments allowed examination of radius of gyration‐MW (R_g‐M) relationships and the Mark‐Houwink‐Sakurada intrinsic viscosity‐MW ([η]‐M) relationships for terpolymers. The R_g‐M and [η]‐M relationships indicated little or no excluded volume effects under SEC conditions indicating that the terpolymers were in near theta conditions in an aqueous buffer solution. Potentiometric titration experiments were performed in deionized (DI) water. These studies revealed that the apparent pK_a of the AMVALTAC terpolymers increases with increasing VAL content. The solution properties of low‐charge density ampholytic terpolymers have been studied as functions of solution pH, ionic strength, and polymer concentration. The charge‐balanced terpolymers exhibit polyampholyte behavior at pH values ≥ 6.5. As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic due to the protonation of the VAL repeat units. Charge‐imbalanced terpolymers generally exhibit polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The solution behavior of the terpolymers in the dilute regime correlates well with that predicted by various polyampholyte solution theories. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3125–3139, 2006     

Microstructural characterization of terpolymers of leucine, β‐benzyl aspartate,and valine

Three different characterization methods—¹³C NMR spectroscopy, a terminal terpolymerization model, and a probability analysis based on the Poisson distribution—were used to determine the microstructure of random terpolymers. The methods were used to determine the amino acid sequence distribution of random terpolymers prepared from the polymerization of N‐carboxyanhydrides that contained L ‐leucine, β‐benzyl‐L ‐aspartate, and L ‐valine. Poly(L ‐leucine‐L ‐aspartic acid‐L ‐valine) [poly(LDV)] was designed as a target specific substrate for the α₄β₁ integrin that recognizes the tripeptide sequence leucine‐aspartic acid‐valine (LDV). The presence of the tripeptide sequence LDV within the polymer was determined to be eight LDV triad sequences on average in terpolymers of approximately 100 kDa. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4328–4337, 2006     

Microstructure par RMN-13C de terpolymeres ethylene-propylene-hexadiene-1,4

¹³C-NMR spectra (62.89 MHz) of ethylene-propylene-1,4-hexadiene terpolymers have been studied. Five resonances can be uniquely assigned to the incorporated diene monomer. Comparison of chemical shifts for model compounds and these five resonances prove that only trans hexadiene is incorporated in the terpolymers.     

Dynamic multivalent lactosides displayed on cyclodextrin beads dangling from polymer strings

[reaction: see text] Lactose-appended cyclodextrin derivatives have been synthesized and threaded onto hydrophobic polymers in aqueous solution to form dynamic multivalent lactosides for binding to lectins. The threading process, which proceeds quickly, can be observed by one- and two-dimensional NMR spectroscopies.