Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Application of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] for splitting of single-walled carbon nanotube bundles in polystyrene/SWCNT composite

Dispersions of single-walled carbon nanotubes (SWCNTs) in organic solutions containing poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) were studied by Raman spectroscopy, UV-vis-NIR spectroscopy, and electron microscopy. This polymer interacts with the nanotube resulting in the appearance of a new red-shifted absorption band in the electronic spectrum. This indicates the formation of a charge-transfer complex between MEH-PPV and SWCNTs. Additives of MEH-PPV make it possible to achieve stable suspensions of nanotubes in styrene. A polystyrene/SWCNT/MEH-PPV composite with a high degree of bundle splitting was obtained by polymerization. It was shown that the luminescence intensity of the nanotubes in the Raman spectrum can serve as a indicator for the estimation of the degree of splitting of SWCNT bundles in the composite.     

Double Functionalization of Carbon Nanotubes with Purine and Pyrimidine Derivatives

Herein, we have developed a synthetic strategy for the covalent double functionalization of single‐walled carbon nanotubes (SWCNTs) with a combination of purine–pyrimidine and purine–purine nucleobase systems. The nucleobases were introduced on the sidewall of oxidized SWCNTs through 1,3‐dipolar cycloaddition and by amidation of the carboxylic acids located at the tips and defect sites of the nanotubes. The new nanohybrids were characterized by transmission electron microscopy, thermogravimetric analysis, FTIR and Raman spectroscopy, magic‐angle spinning NMR spectroscopy, and Kaiser test. The nucleobase/SWCNT conjugates can be envisaged for the modulation of the interactions with nucleic acids by means of base pairing, thereby opening new possibilities in the development of DNA/CNT nanobioconjugates.     

Synthesis and characterization of polyethylene chains grafted onto the sidewalls of single‐walled carbon nanotubes via copolymerization

Polyethylene (PE) chains grafted onto the sidewalls of SWCNTs (SWCNT‐g‐PE) were successfully synthesized via ethylene copolymerization with functionalized single‐walled carbon nanotubes (f‐SWCNTs) catalyzed by rac‐(en)(THInd)₂ZrCl₂/MAO. Here f‐SWCNTs, in which α‐alkene groups were chemically linked on the sidewalls of SWCNTs, were synthesized by Prato reaction. The composition and microstructure of SWCNT‐g‐PE were characterized by means of ¹H NMR, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analyses (TGA), field‐emission scanning electron microscope (FESEM), and transmission electron microscope (TEM). Nanosized cable‐like structure was formed in the SWCNT‐g‐PE, in which the PE formed a tubular shell and several SWCNTs bundles existed as core. The formation of the above morphology in the SWCNT‐g‐PE resulted from successfully grafting of PE chains onto the surface of SWCNTs via copolymerization. The grown PE chains grafted onto the sidewall of the f‐SWCNTs promoted the exfoliation of the mass nanotubes. Comparing with pure PE, the physical mixture of PE/f‐SWCNTs and in situ PE/SWCNTs mixture, thermal stability, and mechanical properties of SWCNT‐g‐PE were higher because of the chemical bonding between the f‐SWCNTs and PE chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5459–5469, 2007     

Diameter Selection of Carbon Nanotubes in Polymer/SWCNT Nanowire Arrays Fabricated by Template Wetting

Arrays of polymer/SWCNT (single‐wall carbon nanotube) nanowires supported on a residual nanocomposite film are prepared by melt wetting using porous anodic aluminum oxide (AAO) as a template. The aggregation parameter of SWCNTs extracted from the analysis of their Raman radial breathing modes gives the highest value for native SWCNTs, indicating that they tend to organize into bundles giving rise to a high degree of aggregation. However, the lowest value achieved at the interface between the nanocomposite film and the nanoarray is explained considering that the forces acting during infiltration are able to disrupt the SWCNT bundles inducing nanotube dispersion. In addition, scanning the nanoarrays along the nanowires length by Raman microscopy has shown a diameter selection of SWCNTs by the AAO membrane. The results reported in this work reveal that it is possible to fabricate arrays of nanowires with homogeneous SWCNT distribution along tens of microns, optimizing nanotube dispersion.     

Theoretical investigation of the stability,electronic and magnetic properties of thiolated single‐wall carbon nanotubes

The addition of SH and OH groups to single‐wall carbon nanotubes (SWCNTs) was investigated employing first principles calculations. In the case of the semiconducting (10, 0) SWCNT the SWCNT‐SH binding energy is weak, 2–4 kcal/mol. However, for the metallic (5, 5) SWCNT it is larger, 7–9 kcal/mol. Thus metallic SWCNTs seem to be more reactive to SH than the semiconducting ones. Indeed, the (6, 6) SWCNT is more reactive to SH than the (10, 0) SWCNT, by 2–3 kcal/mol, something that can be explained only considering the electronic structure of the tube, because the (6, 6) has a larger diameter. The binding energies are larger for the addition of the OH group, 25 and 30 kcal/mol for the (10, 0) and (5, 5) SWCNTs, respectively. When a single OH or SH group is attached to the metallic SWCNTs, we observe important changes in the DOS at the Fermi level. However, when multiple SH groups are attached, the changes in the electronic and magnetic properties depend on the position of the SH groups. The small binding energy found for the SH addition indicates that the successful functionalization of SWCNTs with SH, SCH₃, and S(CH₂)_nSH groups is mostly due to the presence of defects created after acid treatment and to a minor extent by the metallic tubes present in the samples. Perfect semiconducting SWCNTs showed very low reactivity against the SH group. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Selective polycarboxylation of semiconducting single-walled carbon nanotubes by reductive sidewall functionalization

The efficient and controllable synthesis, the detailed characterization, and the chemical postfunctionalization of polycarboxylated single-walled carbon nanotubes SWCNT(COOH)(n) are reported. This innovative covalent sidewall functionalization method is characterized by (a) the preservation of the integrity of the entire σ-framework of SWCNTs; (b) the possibility of achieving very high degrees of addition; (c) control of the functionalization degrees by the variation of the reaction conditions (reaction time, ultrasonic treatment, pressure); (d) the identification of conditions for the selective functionalization of semiconducting carbon nanotubes, leaving unfunctionalized metallic tubes behind; (e) the proof that the introduced carboxylic acid functionalities can serve as versatile anchor points for the coupling to functional molecules; and (f) the application of a subsequent thermal degradation step of the functionalized semiconducting tubes leaving behind intact metallic SWCNTs. Functional derivatives have been characterized in detail by means of Raman, UV-vis/nIR, IR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry, atomic force microscopy, and zeta-potential measurements.     

蒿甲醚在单壁碳纳米管修饰电极上的电催化还原

研制了单壁碳纳米管(SWCNTs)修饰玻碳电极。用交流阻抗谱法(EIS)和扫描电镜(SEM)研究了电极膜性能,应用循环伏安法(CV)、计时库仑法(CC)、计时电流法(CA)研究了蒿甲醚在修饰电极上的电化学行为。结果表明,SWCNTs修饰电极对蒿甲醚的还原有良好的电催化活性,其还原反应为双电子过程,电极反应的扩散系数及速率常数分别为6·67×10-4cm2·s-1及8·54×10-2mol·L-1·s-1。在优化实验条件下,还原峰的峰电位位于-0·85V,其峰电流与蒿甲醚浓度在6·71×10-7~2·45×10-4mol·L-1范围内呈良好线性,检出限达4·02×10-7mol·L-1,相对标准偏差(n=10)为4·2%,可用于蒿甲醚样品的含量测定。     

Deposition and characterization of Langmuir‐Blodgett films of cadmium arachidate/SWCNTs composites

The incorporation of single‐wall carbon nanotubes (SWCNTs) in cadmium arachidate film by means of the Langmuir‐Blodgett (LB) technique was investigated as a function of arachidic acid/SWCNT mass ratio at the air/water interface and in Langmuir‐Blodgett films. The behaviour at the air/water interface shows that SWCNTs act as an independent phase with respect to the cadmium arachidate. Deposition conditions are optimized when the weight ratio between the arachidic acid (AA) and SWCNTs is in the range 0.018:1 to 1:1. The general order of the LB multilayered structure was destroyed by the progressive density increase in SWCNT quantity as evidenced by X‐ray reflectivity (XRR) analysis. Scanning electron microscopy images indicated that when a multilayered structure was formed its layers consisted of SWCNT bundles stacked one over the other. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of N-cyano monoaza crown ethers

N-Cyano monoaza crown ethers were prepared by the reaction of cyanamide with oligoethylene glycol dichlorides or ditosylates in the NaH/DMSO reaction system and led to the derivatives.     

Unraveling the 13C NMR chemical shifts in single-walled carbon nanotubes: dependence on diameter and electronic structure

The atomic specificity afforded by nuclear magnetic resonance (NMR) spectroscopy could enable detailed mechanistic information about single-walled carbon nanotube (SWCNT) functionalization as well as the noncovalent molecular interactions that dictate ground-state charge transfer and separation by electronic structure and diameter. However, to date, the polydispersity present in as-synthesized SWCNT populations has obscured the dependence of the SWCNT (13)C chemical shift on intrinsic parameters such as diameter and electronic structure, meaning that no information is gleaned for specific SWCNTs with unique chiral indices. In this article, we utilize a combination of (13)C labeling and density gradient ultracentrifugation (DGU) to produce an array of (13)C-labeled SWCNT populations with varying diameter, electronic structure, and chiral angle. We find that the SWCNT isotropic (13)C chemical shift decreases systematically with increasing diameter for semiconducting SWCNTs, in agreement with recent theoretical predictions that have heretofore gone unaddressed. Furthermore, we find that the (13)C chemical shifts for small diameter metallic and semiconducting SWCNTs differ significantly, and that the full-width of the isotropic peak for metallic SWCNTs is much larger than that of semiconducting nanotubes, irrespective of diameter.     

Bionano donor-acceptor hybrids of porphyrin, ssDNA, and semiconductive single-wall carbon nanotubes for electron transfer via porphyrin excitation

Photoinduced electron transfer in self-assemblies of porphyrins ion-paired with ssDNA wrapped around single-wall carbon nanotubes (SWCNTs) has been reported. To accomplish the three-component hybrids, two kinds of diameter-sorted semiconducting SWCNT(n,m)s of different diameter ((n,m) = (6,5) and (7,6)) and free-base or zinc porphyrin bearing peripheral positive charges ((TMPyP(+))M (tetrakis(4-N-methylpyridyl)porphyrin); M = Zn and H(2)) serving as light-absorbing photoactive materials are utilized. The donor-acceptor hybrids are held by ion-pairing between the negatively charged phosphate groups of ssDNA on the surface of the SWCNT and the positively charged at the ring periphery porphyrin macrocycle. The newly assembled bionano donor-acceptor hybrids have been characterized by transmission electron microscopy (TEM) and spectroscopic methods. Photoinduced electron transfer from the excited singlet porphyrin to the SWCNTs directly and/or via ssDNA as an electron mediator has been established by performing systematic studies involving the steady-state and time-resolved emission as well as the transient absorption studies. Higher charge-separation efficiency has been successfully demonstrated by the selection of the appropriate semiconductive SWCNTs with the right band gap, in addition to the aid of ssDNA as the electron mediator.     

Modified SWCNTs with Amphoteric Redox and Solubilizing Properties

A complementary double‐covalent functionalization of single‐wall carbon nanotubes (SWCNTs) that involves both solubilizing ionic liquids and electroactive moieties is reported. Our strategy is a simple and efficient methodology based on the stepwise functionalization of the nanotube surface with two different organic moieties. In a first instance, oxidized SWCNTs are amidated with ionic liquid precursors, and further treated with n‐butyl bromide to afford SWCNTs functionalized with 1‐butylimidazolium bromide. This approach allows tuneable polarity induced by anion exchange, which has an effect on the relative solubility of the modified SWCNTs in water. Subsequently, a 1,3‐dipolar cycloaddition reaction was performed to introduce the electron‐acceptor 11,11,12,12‐tetracyano‐9,10‐anthra‐para‐quinodimethane (TCAQ) unit on the SWCNTs. Furthermore, to evaluate the influence of the functional group position, the TCAQ electroactive molecule was anchored through an esterification reaction onto previously oxidized SWCNTs, followed by the Tour reaction to introduce the ionic liquid functions. IR and Raman spectroscopies, thermogravimetric analysis (TGA), UV/Vis/NIR spectroscopy, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS) were employed and clearly confirmed the double‐covalent functionalization of the SWCNTs.     

Double‐Wall Carbon Nanotube–Porphyrin Supramolecular Hybrid: Synthesis and Photophysical Studies

Double‐wall carbon nanotubes (DWCNTs) with pyridyl units covalently attached to the external wall through isoxazolino linkers and carboxylic groups that have been esterified by pentyl chains are synthesized. The properties of these modified DWCNTs are then compared with an analogous sample based on single‐wall carbon nanotubes (SWCNTs). Raman spectroscopy shows the presence of characteristic radial breathing mode vibrations, confirming that the samples partly retain the integrity of the nanotubes in the case of DWCNTs, including the internal and external nanotubes. Quantification of the pyridyl content for both samples (DWCNT and SWCNT derivatives) is based on X‐ray photoelectron spectroscopy and thermogravimetric profiles, showing very similar substituent load. Both pyridyl‐containing nanotubes (DWCNTs and SWCNTs) form a complex with zinc porphyrin (ZnP), as evidenced by the presence of two isosbestic points in the absorption spectra of the porphyrin upon addition of the pyridyl‐functionalized nanotubes. Supramolecular complexes based on pyridyl‐substituted DWCNTs and SWCNTs quench the emission and the triplet excited state identically, through an energy‐transfer mechanism based on pre‐assembly of the ground state. Thus, the presence of the intact inner wall in DWCNTs does not influence the quenching behavior, with respect to SWCNTs, for energy‐transfer quenching with excited ZnP. These results sharply contrast with previous ones referring to electron‐transfer quenching, in which the double‐wall morphology of the nanotubes has been shown to considerably reduce the lifetime of charge separation, owing to faster electron mobility in DWCNTs compared to SWCNTs.     

Naphthalenebisimides as photofunctional surfactants for SWCNTs – towards water-soluble electron donor–acceptor hybrids

A water soluble naphthalenebisimide derivative (NBI) was synthesized and probed to individualize, suspend, and stabilize single wall carbon nanotubes (SWCNTs). Besides a comprehensive photophysical and electrochemical characterization of NBI, stable suspensions of SWCNTs were realized in buffered D₂O. Overall, the dispersion efficiency of the NBI surfactant was determined by comparison with naphthalene based references. Successful individualization of SWCNTs was corroborated in several microscopic assays. In addition, emission spectroscopy points to the strong quenching of SWCNT centered band gap emission, when NBIs are immobilized onto SWCNTs. The origin of the quenching was found to be strong electronic communication, which leads to charge separation between NBIs and photoexcited SWCNTs, and, which yields reduced NBIs as well oxidized SWCNTs. Notably, electrochemical considerations revealed that the energy content of these charge separated states is one of the highest reported for SWCNT based electron donor–acceptor hybrids so far.     

Preparation and Cellular Uptake of pH‐Dependent Fluorescent Single‐Wall Carbon Nanotubes

Fluorescent single‐wall carbon nanotubes (SWCNTs) were prepared by mixing cut SWCNTs with acridine orange (AO). The optical absorbance and fluorescence characteristics of AO–SWCNT conjugates display interesting pH‐dependent properties. Fluorescence microscopy in combination with transmission electron microscopy proves that AO–SWCNTs can enter HeLa cells and are located inside lysosomes. The endocytosis‐inhibiting tests show that the clathrin‐mediated endocytosis is a key step in the internalization process. The internalized AO–SWCNTs remain inside lysosomes for more than a week and have little effect on cell proliferation. These findings may be useful in understanding the SWCNT‐based intracellular drug delivery mechanism and help to develop new intracellular drug transporters.     

Highly dispersed Pt catalysts on single-walled carbon nanotubes and their role in methanol oxidation

Well-dispersed Pt catalysts with very high utilization efficiencies for fuel cell reactions have been prepared by ethylene glycol reduction on polymer-wrapped single-walled carbon nanotubes (SWCNTs). By wrapping the SWCNTs in a polymer such as polystyrene sulfonate, we are able to break up the nanotube bundles to achieve better dispersion. These polymer-wrapped SWCNTs with platinum nanoparticles deposited on them show very high electrochemically active surface areas. The increase in utilization efficiencies for platinum catalysts on these SWCNT supports can be attributed to the increased surface areas and the well-dispersed nature of the carbon support and catalyst. The catalyst dispersion facilitates diffusion of reactant species which in turn results in higher methanol oxidation currents and more positive potentials for oxygen reduction.     

Importance of Oxygen in the Metal-Free Catalytic Growth of Single-Walled Carbon Nanotubes from SiO(x) by a Vapor-Solid-Solid Mechanism

To understand in-depth the nature of the catalyst and the growth mechanism of single-walled carbon nanotubes (SWCNTs) on a newly developed silica catalyst, we performed this combined experimental and theoretical study. In situ transmission electron microscopy (TEM) observations revealed that the active catalyst for the SWCNT growth is solid and amorphous SiO(x) nanoparticles (NPs), suggesting a vapor-solid-solid growth mechanism. From in situ TEM and chemical vapor deposition growth experiments, we found that oxygen plays a crucial role in SWCNT growth in addition to the well-known catalyst size effect. Density functional theory calculations showed that oxygen atoms can enhance the capture of -CH(x) and consequently facilitate the growth of SWCNTs on oxygen-containing SiO(x) NPs.     

Self-assembled linear bundles of single wall carbon nanotubes and their alignment and deposition as a film in a dc field

A one-step process of solubilization of single wall carbon nanotubes (SWCNT) in an organic solvent has enabled us to polarize them asymmetrically in a dc electric field. Quaternary ammonium ion-capped SWCNTs readily suspend in organic solvents; under the influence of a dc electric field, they assemble as stretched bundles anchored on the positive electrode. At low dc applied field (approximately 40 V), all of the SWCNTs from the suspension are deposited on the electrode, thus providing a simple methodology to design robust SWCNT films. At higher applied voltages (>100 V), the SWCNT bundles stretch out into the solution and orient themselves perpendicular to the electrode surface. The alignment of these bundles is responsive to the ON-OFF cycles of the applied electric field. The possibility of modulating the alignment of SWCNT in an electric field opens new ways to achieve electrical contacts in nano- to micro-devices.     

Carbon nanotube sidewall functionalization with carbonyl compounds--modified Birch conditions vs the organometallic reduction approach

Covalent addition reactions turned out to be one of the most important functionalization techniques for a structural alteration of single walled carbon nanotube (SWCNT) scaffolds. During the last years, several reaction sequences based on an electrophilic interception of intermediately generated SWCNT(n-) carbanions, obtained via Birch reduction or by a nucleophilic addition of organometallic species, have been developed. Nevertheless, the scope and the variety of potential electrophiles is limited due to the harsh reaction conditions requested for a covalent attachment of the functional entities onto the SWCNT framework. Herein, we present a significant modification of the reductive alkylation/arylation sequence, the so-called Billups reaction, which extends the portfolio of electrophiles for covalent sidewall functionalization to carbonyl compounds--ketones, esters, and even carboxylic acid chlorides. Moreover, these carbonyl-based electrophiles can also be used as secondary functionalization reagents for anionic SWCNT intermediates, derived from a primary nucleophilic addition step. This directly leads to the generation of mixed functional SWCNT architectures, equipped with hydroxyl or carbonyl anchor groups, suitable for ongoing derivatization reactions. A correlated absorption and emission spectroscopic study elucidates the influence of the covalent sidewall functionalization degree onto the excitonic transition features of carbon nanotubes. The characterization of the different SWCNT adducts has been carried out by means of Raman, UV-vis/nIR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry and X-ray photoelectron spectroscopy analysis.