Synthesis of 5-(dimethylsilyl)pentylalkylferrocene-grafted HTPB (alkylFc-HTPB) via platinum-catalyzed hydrosilylation

In this work, at first alkylferrocene derivatives were synthesized according to procedure described in the literature. (5-Chloropentanoyl)ferrocene derivatives were prepared by Friedel–Crafts acylation of ferrocene and alkylferrocene derivatives with 5-chloropentanoyl chloride in dichloromethane, and AlCl₃ was used as catalyst. The corresponding 5-chloropentylferrocene derivatives were synthesized from reduction of these products by NaBH₄ in diglyme at 0 °C. Finally (5-alkylferrocenylpentyl)dimethylsilane was synthesized from reaction of 5-chloropentylferrocene derivatives with magnesium in THF and reaction of corresponding Grignard reagents with chlorodimethylsilane in 82–87% yields. ¹H and ¹³C NMR, FT-IR spectroscopy supported the predicted structure of the product. Nine samples of alkylferrocene-grafted hydroxyl-terminated polybutadiene (alkylFc-HTPB) derivatives, containing different percent of iron, were synthesized by hydrosilylation reaction of [5-(alkylferrocenyl)pentyl]dimethylsilane with hydroxy-terminated polybutadiene (HTPB), in the presence of catalytic amount of the hexachloroplatinic acid (Speier’s catalyst). FT-IR spectroscopy was utilized to follow the progress of the reaction, by monitoring the loss of the Si–H absorption at 2110 cm^?1, and the reaction was completed in 24 h. Some properties of resulting prepolymer like viscosity, glass transition temperature and iron percentage as important parameters in production of composite propellants were investigated. For example, the viscosity increased with increasing iron content because of the greater extent of ferrocene grafting in the polymer.     

Microstructures and photocatalytic properties of Ag and La surface codoped TiO2 films prepared by sol–gel method

Ag⁺ and La³⁺ surface codoped TiO₂ films were successfully prepared by the improved sol–gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA–TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller (BET) surface area, Photoluminescence spectrum (PL) and UV–vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO₂ films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag⁺ and La³⁺, TiO₂ films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed.     

Ultrasensitive and rapid screening of mercury(II) ions by dual labeling colorimetric method in aqueous samples and applications in mercury-poisoned animal tissues

Rapid and ultrasensitive detection of trace heavy metal mercury(II) ions (Hg²⁺) are of significant importance due to the induced serious risks for environment and human health. This presented article reports the gold nanoparticle-based dual labeling colorimetric method (Dual-COLO) for ultrasensitive and rapid detection of Hg²⁺ using the specific thymine–Hg²⁺–thymine (T–Hg²⁺–T) as recognition system and the dual labeling strategy for signal amplification. Both qualitative and quantitative detections of Hg²⁺ are achieved successfully in aqueous samples. More importantly, the achieved detection limit of 0.005 ng mL⁻¹ (0.025 nM) without any instruments is very competitive to other rapid detection methods even ICP-MS based methods. This Dual-COLO method is also applied directly for real water sample monitoring and, more importantly, applied in analysis of mercury poisoned animal tissues and body fluidic samples, indicating a potentially powerful and promising tool for environmental monitoring and food safety control.     

The 13C NMR spectra and structure of ferrocenylcarbenium ions

The ¹³C NMR spectra ofthe series of α,α’ -dideuterated ferrocenylcarbenium ions and their precursors, ferrocenylcarbinols as well as other ferrocene derivatives have been measured. The structures of ferrocenylcarbenium ions is discussed.     

Carbon-13 NMR spectra of ferrocenes and ferrocenyl-alkylium ions

The proton-coupled and proton-decoupled pulsed Fourier-transform ¹³C NMR spectra of a series of neutral ferrocene derivatives and ferrocenylalkylium ions have been recorded and analysed. The influence of a substituent group upon the ¹³C shifts of the carbons of the ferrocene rings has been investigated. The spectra of the ferrocenylalkylium ions are discussed in relation to the distribution of positive charge and to the various structural models which have been proposed for such species.     

Surface-enhanced Raman scattering in nanoliter droplets: towards high-sensitivity detection of mercury (II) ions

We report a new method for the trace analysis of mercury (II) ions in water. The approach involves the use of droplet-based microfluidics combined with surface-enhanced Raman scattering (SERS) detection. This novel combination provides both fast and sensitive detection of mercury (II) ions in water. Specifically, mercury (II) ion detection is performed by using the strong affinity between gold nanoparticles and mercury (II) ions. This interaction causes a change in the SERS signal of the reporter molecule rhodamine B that is a function of mercury (II) ion concentration. To allow both reproducible and quantitative analysis, aqueous samples are encapsulated within nanoliter-sized droplets. Manipulation of such droplets through winding microchannels affords rapid and efficient mixing of the contents. Additionally, memory effects, caused by the precipitation of nanoparticle aggregates on channel walls, are removed since the aqueous droplets are completely isolated by a continuous oil phase. Quantitative analysis of mercury (II) ions was performed by calculating spectral peak area of rhodamine B at 1,647 cm⁻¹. Using this approach, the calculated concentration limit of detection was estimated to be between 100 and 500 ppt. Compared with fluorescence-based methods for the trace analysis of mercury (II) ions, the detection sensitivities were enhanced by approximately one order of magnitude. The proposed analytical method offers a rapid and reproducible trace detection capability for mercury (II) ions in water.     

Synthesis of Ferrocene Based Naphthoquinones and its Application as Novel Non‐enzymatic Hydrogen Peroxide

At present, a highly sensitive hydrogen peroxide (H₂O₂) sensor is fabricated by ferrocene based naphthaquinone derivatives as 2,3‐Diferrocenyl‐1,4‐naphthoquinone and 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone. These ferrocene based naphthaquinone derivatives are characterized by H‐NMR and C‐NMR. The electrochemical properties of these ferrocene based naphthaquinone are investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) on modified glassy carbon electrode (GCE). The modified electrode with ferrocene based naphthaquinone derivatives exhibits an improved voltammetric response to the H₂O₂ redox reaction. 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone show excellent non‐enzymatic sensing ability towards H₂O₂ response with a detection limitation of 2.7 μmol/L a wide detection range from 10 μM to 400 μM in H₂O₂ detection. The sensor also exhibits short response time (1 s) and good sensitivity of 71.4 μA mM^?1 cm^?2 and stability. Furthermore, the DPV method exhibited very high sensitivity (18999 μA mM^?1 cm^?2) and low detection limit (0.66 μM) compared to the CA method. Ferrocene based naphthaquinone derivative based sensors have a lower cost and high stability. Thus, this novel non‐enzyme sensor has potential application in H₂O₂ detection.     

Multi‐Stimuli‐Responsive Organometallic Gels Based on Ferrocene‐Linked Poly(Aryl Ether) Dendrons: Reversible Redox Switching and Pb2+‐Ion Sensing

We describe the design, synthesis, and “stimuli‐responsive” study of ferrocene‐linked Fréchet‐type [poly(aryl ether)]‐dendron‐based organometallic gels, in which the ferrocene moiety is attached to the dendron framework through an acyl hydrazone linkage. The low‐molecular‐weight gelators (LMWGs) form robust gels in both polar and non‐polar solvent/solvent mixtures. The organometallic gels undergo stimuli‐responsive behavior through 1) thermal, 2) chemical, and 3) electrochemical methods. Among them, conditions 1 and 3 lead to seamlessly reversible with repeated cycles of identical efficiency. Results indicate that the flexible nature of the poly(aryl ether) dendron framework plays a key role in retaining the reversible electrochemical behavior of ferrocene moiety in the LMWGs. Further, the organometallic gelators have exhibited unique selectivity towards Pb²⁺ ions (detection limit ≈10^?8 M ). The metal ion‐sensing results in a gel–sol phase transition associated with a color change visible to the naked eye. Most importantly, decomplexing the metal ion from the system leads to the regeneration of the initial gel morphology, indicating the restoring ability of the organometallic gel. The metal–ligand binding nature has been analyzed by using ¹H NMR spectroscopy, mass spectrometry, and DFT calculations.     

Novel organogelators based on pyrazine-2,5-dicarboxylic acid derivatives and their mesomorphic behaviors

A series of new low molecular organogelators (LMOGs) with thermotropic mesophase were synthesized via the reaction of 3,6-dimethyl-pyrazine-2,5-dicarboxylic acid with p-alkoxyl anilines. These compounds readily formed stable gels in a variety of organic solvents and their self-assembly behavior, structure–property relationship were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), ¹H nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FTIR) and ultra-violet–visible spectroscopy (UV). The results showed a combination of intra-hydrogen bonding, π–π stacking and van der Waals interaction resulted in the aggregation of the organogelators to form three-dimension fibrous networks. The gels formed were multi-responsive to environmental stimuli, such as temperature, fluorinion, and shear stress. More importantly, all the organogelators exhibited thermotropic hexagonal column mesophase as revealed by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and variable temperature XRD studies. A control compound was synthesized and its gelling ability was also checked.     

Poly(acrylamide) grafts on spherical bead polymers for extremely selective removal of mercuric ions from aqueous solutions

Poly(acrylamide) grafted from solid polymer particles provides a simple solution for extremely selective removal of mercuric ions from aqueous solutions. The grafting of polyacrylamide has been performed, in high yields (164%), by redox initiation from iminoacetic acid groups created on crosslinked spherical beads (210–420 μm) of glycidyl methacrylate/methyl methacrylate/ethylene glycol dimethacrylate terpolymer. In the grafting, homopolymer formation has been reduced greatly (22%) by the treatment of the bead polymer with ceric ammonium nitrate before the addition of acrylamide monomer. The mobility of the graft chains provides nearly homogeneous reaction conditions and rapid mercury binding ability, as for low molecular weight amides [mercury sorption by a 0.105‐g polymer sample from 105 mL of a 7.74 × 10^?4 mol L^?1 (～155 ppm) Hg(II) solution shows first‐order kinetics with respect to the Hg(II) concentration, k = 1.1 × 10^?3 s^?1]. The mercury sorption capacity under nonbuffered conditions is around 3.6 mmol g^?1 (i.e., 720 g of mercury/kg) and mostly occurs with the formation of diamido–mercury linkages, which result in the crosslinking of polyacrylamide brushes outside the spherical beads. The crosslinks can be destroyed by treatment with hot acetic acid, without hydrolysis of the amide groups. This process allows a complete elution of the mercury as mercury acetate, and the overall result is reversible crosslinking of the outer shell by mercuric ions. The material presented is efficient in the removal of mercury at concentrations measured in parts per million, and the mercury sorption is extremely selective over some foreign ions, such as Fe(III), Cd(II), Zn(II), and Pb(II). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3068–3078, 2002     

水热沉淀法制备掺铁二氧化钛中空球及其光催化性能

 以碳球为模板剂, 采用水热沉淀法制备了不同配比掺 Fe 的 TiO2 (Fe-TiO2) 中空球, 并运用 X 射线粉末衍射、扫描电子显微镜、元素分析能谱、红外光谱和热重等方法对其进行了表征. 结果表明, 中空球为锐钛矿相, 大小为 0.5~3.20 ?m, 壳层厚度为 30~60 nm, 比表面积为 150~300 m2/g. 随着 Fe 掺杂量的增加, 中空球在可见光区的吸收强度逐渐增加. 光催化降解实验表明, 掺 Fe 后, TiO2 中空球的可见光催化活性升高, 其中 0.5% Fe-TiO2 在 80 min 内降解亚甲基蓝超过 75%. 同时还讨论了光催化机制.     

A ratiometric electrochemical biosensor for sensitive detection of Hg based on thymine–Hg–thymine structure

In this paper, a simple, selective and reusable electrochemical biosensor for the sensitive detection of mercury ions (Hg²⁺) has been developed based on thymine (T)-rich stem–loop (hairpin) DNA probe and a dual-signaling electrochemical ratiometric strategy. The assay strategy includes both “signal-on” and “signal-off” elements. The thiolated methylene blue (MB)-modified T-rich hairpin DNA capture probe (MB-P) firstly self-assembled on the gold electrode surface via Au–S bond. In the presence of Hg²⁺, the ferrocene (Fc)-labeled T-rich DNA probe (Fc-P) hybridized with MB-P via the Hg²⁺-mediated coordination of T–Hg²⁺–T base pairs. As a result, the hairpin MB-P was opened, the MB tags were away from the gold electrode surface and the Fc tags closed to the gold electrode surface. These conformation changes led to the decrease of the oxidation peak current of MB (I_MB), accompanied with the increase of that of Fc (I_Fc). The logarithmic value of I_Fc/I_MB is linear with the logarithm of Hg²⁺ concentration in the range from 0.5 nM to 5000 nM, and the detection limit of 0.08 nM is much lower than 10 nM (the US Environmental Protection Agency (EPA) limit of Hg²⁺ in drinking water). What is more, the developed DNA-based electrochemical biosensor could be regenerated by adding cysteine and Mg²⁺. This strategy provides a simple and rapid approach for the detection of Hg²⁺, and has promising application in the detection of Hg²⁺ in real environmental samples.     

Tuneable superbase-catalyzed vinylation of α-hydroxyalkylferrocenes with alkynes

Superbase-catalyzed (KOH/DMSO suspension as a catalyst) vinylation of hydroxymethyl- and hydroxyethylferrocenes with terminal and internal alkynes (acetylene, propyne, phenylacetylene, 3-ethynylpyridine, 1-propyn-1-yl-benzene, diphenylacetylene) affords hitherto unknown vinyl ethers of ferrocene in 30–93% yields depending on the alkyne structure and the tuneable ratio of reactants/KOH/DMSO. The vinylation smoothly proceeds under mild conditions (70–90 °C, 0.25–13 h). With unsubstituted acetylene the process is readily realized under atmospheric pressure (yield of the corresponding vinyl ethers is 81–90%) though under pressure (initial pressure at room temperature is 10–13 atm, maximum pressure is 13–16 atm at the reaction temperature) the yield is close to quantitative (93%). The synthesized compounds were characterized using ¹H and ¹³C NMR, and IR spectroscopy, as well as X-ray diffraction analysis.     

A novel hierarchical nanobiocomposite of graphene oxide–magnetic chitosan grafted with mercapto as a solid phase extraction sorbent for the determination of mercury ions in environmental water samples

New mercapto-grafted graphene oxide–magnetic chitosan (GO–MC) has been developed as a novel biosorbent for the preconcentration and extraction of mercury ion from water samples. A facile and ecofriendly synthesis procedure was also developed for modification of GO–MC with 3-mercaptopropyltrimethoxysilane. The prepared nanocomposite material (mercapto/GO–MC) was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and energy-dispersive X-ray spectroscopy (EDX). The mercury analysis was performed by continuous-flow cold vapor atomic absorption spectrometry. The parameters affecting the extraction and preconcentration processes were carried out. The optimum conditions were found to be 60 mg of sorbent, pH of 6.5, 10 min for adsorption time, 3 mL of HCl (0.1 mol L⁻¹)/thiourea (2% w/v) as the eluent and 250 mL for breakthrough volume. An excellent linearity was achieved in the range of 0.12–80 ng mL⁻¹ (R² = 0.999) at a preconcentration factor of 80. The limit of detection and quantification were achieved as 0.06 ng mL⁻¹ and 0.12 ng mL⁻¹, respectively. A good repeatability was obtained with the relative standard deviation (RSD) of 4.7%. Furthermore, real water samples were analyzed and good recoveries were obtained from 95 to 100%.     

A Molecular Imaging Approach to Mercury Sensing Based on Hyperpolarized 129Xe Molecular Clamp Probe

Mercury pollution, in the form of mercury ions (Hg²⁺), is a major health and environmental hazard. Commonly used sensors are invasive and limited to point measurements. Fluorescence‐based sensors do not provide depth resolution needed to image spatial distributions. Herein we report a novel sensor capable of yielding spatial distributions by MRI using hyperpolarized ¹²⁹Xe. A molecular clamp probe was developed consisting of dipyrrolylquinoxaline (DPQ) derivatives and twocryptophane‐A cages. The DPQ derivatives act as cation receptors whereas cryptophane‐A acts as a suitable host molecule for xenon. When the DPQ moiety interacts with mercury ions, the molecular clamp closes on the ion. Due to overlap of the electron clouds of the two cryptophane‐A cages, the shielding effect on the encapsulated Xe becomes important. This leads to an upfield change of the chemical shift of the encapsulated Xe. This sensor exhibits good selectivity and sensitivity toward the mercury ion. This mercury‐activated hyperpolarized ¹²⁹Xe‐based chemosensor is a new concept method for monitoring Hg²⁺ ion distributions by MRI.     

Octamethyl‐1, 1′‐di(2‐pyridyl)ferrocene: A Redox‐Active Ligand with a Pronounced Selectivity for Divalent Metal Ions

Octamethyl‐1, 1′‐di(2‐pyridyl)ferrocene ( 1 ) acts as molecular electrochemical sensor for magnesium, calcium, zinc, and cadmium ions in acetonitrile solution. The new redox peak, anodically shifted by ca. 0.40 V, which appears in the cyclic voltammogram of 1 in the presence of even small amounts (10 mol %) of these ions, is unaffected by an excess of alkali metal ions. Metal complexation is accompanied by a batho‐ and hyper‐chromic shift of the band in the visible region of the UV‐Vis spectrum of 1 . A detailed study of the behaviour of 1 towards zinc chloride in acetonitrile solution has revealed that 1 is able to accommodate a maximum of two zinc ions. Oxidation of zinc‐coordinated 1 leads to partial decomplexation. The N‐methyl and N‐benzyl species 1 Me⁺, 1 Me₂²⁺, 1 Bzl⁺ and 1 Bzl₂²⁺ have been synthesized and the former two structurally investigated by X‐ray diffraction. Alkylation causes an anodic shift of the redox potential of the ferrocene nucleus, which is linearly dependent on the number of alkyl groups introduced. Octamethyl‐1, 1′‐di(2‐thiophenyl)ferrocene ( 2 ) has also been synthesized and structurally characterized by X‐ray diffraction. Cyclic voltammetry has revealed that, in contrast to 1 , 2 does not respond to the divalent metal ions studied.     

Er as marker for order–disorder determination in the PbTiO3 system

Er³⁺ ions were added to the PbTiO₃ network using the polymeric precursor method to characterize the order–disorder transformation found in this material by means of experimental and theoretical approach. The disordered and ordered material structures were studied by photoluminescence measurements, X-ray diffraction (XRD) and UV–visible spectroscopy. The Er³⁺ ions served as a marker to identify the structural short-range order beginning in the PbTiO₃ matrix. From photoluminescence results it was concluded that disordered PbTiO₃ powders have a certain short range order in the network that are undetected by XRD measurements. The electronic structures were calculated by the ab initio periodic method in DFT level with the non-local B3LYP hybrid approximation for the Ti atom site interpretation using density of states (DOS) results. This analysis enabled understanding that Ti atom sphere coordination can create possible states for radioactive return and trap of electron–holes pair.     

Isophorone‐based organometallic chromophores: Synthesis,characterization and investigation of electro‐optical properties

A series of hybrid donor–acceptor complexes with a ferrocene moiety and isophorone derivatives were synthesized. Data from ¹H NMR, ¹³C NMR, Fourier transform infrared, atomic absorption and mass spectroscopies and CHN analysis supported the predicted structure of the products. A comparative investigation was performed using UV–visible, cyclic voltammetry and fluorescence measurements. Density functional theory was used to optimize the chromophore structure and calculation of highest occupied and lowest unoccupied molecular orbital energy levels. The ferrocene/isophorone hybrids show useful properties for further development and studies as electro‐optic materials.     

Synthesis and liquid crystal properties of copper(II) and palladium(II) chelates with new ferrocene-containing enaminoketones

Heterometallic liquid crystals are of special interest because of the possibility to combine optical, magnetic and electric properties of different metal ions in one mesogenic molecule. In order to investigate new heteropolynuclear mesogenic systems, a series of β-aminovinylketone ligands derived from acetyl ferrocene have been synthesized. Subsequently Cu(II) and Pd(II) ions were incorporated into the enaminoketone chelate core. The obtained ligands and complexes were characterized by element analysis, ¹H NMR, IR and UV–Vis spectroscopies. According to thermal polarizing microscopy and DSC studies, the ligands and Cu(II) complexes exhibit disordered soft crystal phases upon cooling from the isotropic liquid state. The Pd(II) complexes showed monotropic smectic C mesomorphism. The metal centres in the synthesized heteropolynuclear mesogens are in close vicinity to each other, which is of considerable interest from the viewpoint of the potential electron-transfer interactions between a ferrocene core and the central ions.