可见光响应的铁掺杂TiO_2中空微球的制备及其光催化性能

以聚苯乙烯微球作为模板,水溶性过氧化钛配合物作为前驱体一步合成了掺铁TiO2中空微球,并利用XRD,SEM,TEM,XPS,UV-Vis等测试手段对样品进行了表征。结果表明,一步法制备的掺铁TiO2中空微球以锐钛矿相存在且具有良好的中空结构,掺杂少量铁到体系中,改变了其电子结构,使其吸收波长拓展到可见光区。光催化降解亚甲基蓝溶液的结果表明,掺杂0.75%铁的TiO2中空微球表现出更好的光催化性能。对Fe3+影响光催化活性的机理进行了讨论。     

超临界乙醇干燥法制备高热稳定性Fe-TiO2

以TiCl4和Fe(NO3)3为前体,采用共沉淀法和乙醇超临界干燥技术合成了具有不同Fe3 掺杂量的TiO2,样品织构性质用XRD、TEM、BET、TG和UV-vis等技术表征.研究结果表明,超临界干燥方法可以有效地提高Fe-TiO2样品的热稳定性,样品在500℃焙烧时Fe3 对TiO2的比表面积、晶粒度、晶相等性质影响不大,即使在800℃焙烧还能保持锐钛矿晶型.但Fe3 在掺杂量小于0.5at%时,Fe3 会与TiO2晶格中的Ti4 发生同晶取代,从而使TiO2的锐钛矿晶胞参数和晶胞体积增大,导致晶格应力和表面张力增加;当Fe3 掺杂量大于0.5at%时,Fe3 以氧化物形式在TiO2表面聚集,在800℃热处理中晶粒更易被烧结增大;漫反射UV-vis光谱表征发现,Fe3 掺杂提高了样品对可见光的吸收,随着Fe3 含量和焙烧温度的提高,样品对可见光的吸收也随着增加.但是Fe3 掺杂降低了锐钛矿TiO2在紫外光下降解甲基橙速率,这表明锐钛矿TiO2的光催化活性与样品的晶格缺陷和颗粒尺寸密切相关.     

Fe掺杂对纳米TiO2薄膜的结构与光催化性能的影响

采用溶胶-凝胶法制备了Fe掺杂的TiO2薄膜,利用X射线光电子能谱、X射线衍射技术、显微共聚焦拉曼光谱、紫外可见光谱和原子力显微镜等对薄膜进行表征,以甲基橙为反应模型对光催化活性进行测试。 结果表明,在300~600 ℃焙烧时,TiO2以锐钛矿结构存在,700 ℃焙烧时出现金红石结构。 随掺铁量和焙烧温度的增加,Fe/TiO2薄膜的表面粗糙度和晶粒尺寸均逐渐增大;随镀膜层数的增加,Fe/TiO2薄膜光谱吸收向可见光方向移动;较低含量的铁掺杂改善了TiO2薄膜的光催化活性,而较高含量的铁掺杂则使TiO2薄膜的光催化活性下降,掺铁量为0.1%时Fe/TiO2薄膜的光催化活性最好。     

掺铁纳米TiO_2的制备及其光催化性能

以TiC l4为原料,采用微波加热与常规加热2步合成法制备掺铁纳米TiO2。用X射线粉末衍射(XRD)、透射电镜(TEM)、紫外可见吸收光谱(UV-V is)、光电子能谱(XPS)等测试技术对其进行了表征。结果表明,所制得的掺铁纳米TiO2是以锐钛矿为主相的混晶,平均粒径约为10 nm,适量Fe3+的掺杂能促进金红石相变,抑制锐钛矿晶粒的生长,使Ti2p电子结合能升高0.3 eV,并使TiO2吸光能力增强,带边吸收向可见光区移动。在UVA段(320~400 nm)光照下,通过对维生素VB12的光催化降解,发现掺入摩尔分数为0.5%的Fe3+的纳米TiO2能明显提高其光催化活性,使维生素B12的降解速率提高2.3倍。     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

Fe_2BiTaO_7纳米催化剂的组织结构及光催化性能（英文）

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

钇掺杂有序大孔TiO_2微球的制备与光催化性能研究

采用溶胶-凝胶法、胶体晶体模板法制备了钇掺杂有序多孔TiO2微球,利用FTIR,SEM,XRD,XPS,UV-V is分析对其进行表征,并研究钇掺杂前后材料的光催化性能。结果表明:钇掺杂有序多孔TiO2微球规整致密,但局部有孔洞的塌陷。钇掺杂前后有序多孔TiO2微球的晶型没有改变,仍为锐钛矿型。XPS分析发现钇掺杂有序多孔TiO2微球是可行的,材料中含有钇元素含量约为1.0%。UV-V is分析表明钇掺杂使得TiO2吸收光红移至可见光区,甲基橙降解实验显示掺钇有序多孔TiO2微球的光催化性能好于未掺钇TiO2的光催化性能。     

铁、氮共掺杂二氧化钛薄膜的亲水性能

采用溶胶-凝胶法制备了铁掺杂TiO2(Fe-TiO2)薄膜, 将Fe-TiO2薄膜放置氨气气氛中高温处理, 形成铁、氮共掺杂TiO2(Fe/N-TiO2)薄膜. 通过XRD、XPS、SEM、UV-Vis法进行吸收光谱分析及薄膜表面亲水接触角分析, 研究了铁、氮掺杂浓度, 热处理温度, 膜厚等因素对薄膜亲水性能的影响. 结果表明, Fe/N-TiO2(0.5%Fe, 摩尔百分数)显示出更佳的亲水性能, 在可见光下优势尤为明显. 铁掺杂主要作用是降低电子和空穴的复合几率, 氮掺杂可以增强TiO2薄膜在可见光区的吸收, 两种效应相互结合, 共同提高了薄膜在可见光下的亲水性能.     

铁、氦共掺杂二氧化钛薄膜的亲水性能

采用溶胶-凝胶法制备了铁掺杂TiO2(Fe-TiO2)薄膜,将Fe-TiO2薄膜放置氨气气氛中高温处理,形成铁、氮共掺杂TiO2(Fe/N-TiO2)薄膜.通过XRD、XPS、SEM、UV-Vis法进行吸收光谱分析及薄膜表面亲水接触角分析,研究了铁、氮掺杂浓度,热处理温度,膜厚等因素对薄膜亲水性能的影响.结果表明,Fe/N-TiO2(0.5%Fe,摩尔百分数)显示出更佳的亲水性能,在可见光下优势尤为明显.铁掺杂主要作用是降低电子和空穴的复合几率,氮掺杂可以增强TiO2薄膜在可见光区的吸收,两种效应相互结合,共同提高了薄膜在可见光下的亲水性能.     

Fe3+改性纳米ZnO光催化降解壬基酚聚氧乙烯醚

采用氨浸法制备了不同Fe3 含量的Fe3 /ZnO光催化剂,并用X射线衍射、N2吸附、X射线光电子能谱和紫外-可见漫反射光谱对纳米Fe3 /ZnO进行了表征.以壬基酚聚氧乙烯醚(NPE-10)为模型污染物,分别在紫外光和可见光下考察了纳米Fe3 /ZnO的光催化活性.结果表明,该方法能成功地将Fe掺杂到ZnO晶体上,且随着Fe3 添加量的增加,ZnO的晶粒尺寸逐渐减小,比表面积逐渐增大.与纳米ZnO样品相比,Fe3 /ZnO中Fe2p结合能减小,而Zn2p和O1s结合能增大,ZnO表面的羟基氧和吸附氧含量增加,光催化活性提高.当Fe3 的添加量大于0.5%时,Fe3 /ZnO样品的吸收光谱发生红移,在可见光区出现吸收.光催化降解结果显示,0.5?3 /ZnO样品的光催化活性最高,在紫外光和可见光照射3h后对NPE-10的降解率分别比纯ZnO提高18%和69%.     

Novel sol–gel synthesis of N-doped TiO<Subscript>2</Subscript> hollow spheres with high photocatalytic activity under visible light

Novel ammonia and triethanolamine assisted sol–gel synthesis method was developed to fabricate the N-doped TiO₂ hollow spheres. The prepared hollow spheres were in submicron size and had good morphology and high specific surface area. Polystyrene (PS) latexes in size of 470 nm were used as the templates to fabricate PS/TiO₂ core–shell spheres. Here ammonia and triethanolamine was first employed together to control the sol–gel process. The N-doped TiO₂ hollow spheres were got after calcinations of the core–shell spheres by using triethanolamine as N source, and the amount of doped N could be easily adjusted by changing the amount of triethanolamine. The hollow spheres had distinct visible light response, and the optical response shifted more to the visible region as the amount of doped N increases. The photodegradation of methylene blue expressed the high photocatalytic activity of the N-doped TiO₂ hollow spheres under visible light.     

氮掺杂石墨烯负载的硫化镉空心球纳米复合材料的光催化性能

通过无模板法一步合成了一种新型N掺杂石墨烯负载的CdS空心球复合材料. 采用X射线衍射、透射电镜、红外光谱、紫外-可见光谱、N₂吸附-脱附、荧光光谱和X射线光电子能谱等技术对该材料进行了表征, 并在可见光照射下测试了其在降解亚甲基蓝和水杨酸中的光催化性能. 结果表明, 相对于氧化石墨烯负载硫化镉空心球和单独的硫化镉空心球, 氮掺杂石墨烯负载的硫化镉空心球具有更高的光催化活性和稳定性. 这是由于氮掺杂的石墨烯能充当优异的电子受体和传输体, 从而抑制了载流子的复合. 另外发现, 羟基自由基是可见光下降解亚甲基蓝的主要活性物种.     

原位碳、氮共掺杂二氧化钛空心球的制备与可见光光催化性能

在H₂O₂-HF 的乙醇-水混合溶液中, 通过水热处理碳氮化钛(TiCN)制备了碳、氮共掺杂TiO₂ 空心球(CNTH). 用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X 射线光电子能谱(XPS)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 在可见光(λ≥400 nm)照射下, 通过降解甲基蓝检测了碳、氮共掺杂TiO₂空心球的光催化活性. 结果表明, 源于TiCN中的部分碳和氮原子原位掺入了TiO₂的晶格中, 部分碳掺入TiO₂点阵的间隙中. 该材料在整个可见光区展示了增强的可见光吸收, 其带边明显红移. 光催化研究表明在强可见光吸收和独特的空心球结构的协同作用下, 碳、氮共掺杂TiO₂空心球展示了比P25更高的可见光光催化活性.     

生物质C-N-P自掺杂TiO_2的合成及其对亚甲基兰的光催化降解活性

采用溶胶-超声辐照技术同步合成了生物质C-N-P自掺杂TiO_2复合催化剂,通过X射线光电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(FESEM)、紫外-可见漫反射光谱(UV-Vis-DRS)及光致发光光谱(PL)对样品进行了表征.以亚甲基兰(MB)为目标污染物,研究了C-N-P共掺杂TiO_2的可见光光催化性能.实验结果表明,在可见光照射下,光催化反应时间为2 h时,C-N-P共掺杂TiO_2复合催化剂对亚甲基兰的降解效率最高可达9 8.5%;相比纯TiO_2,C-N-P共掺杂TiO_2复合催化剂的比表面积增大,吸收边带红移,禁带宽度减小,相变温度升高,光生载流子复合率降低.     

金/氧化亚铜异质球的制备及其可见光催化性能

使用L-半胱氨酸作为连接剂, 利用硼氢化钠原位还原预先吸附在介孔氧化亚铜表面的氯金酸根离子,得到了Au/Cu₂O异质结构. 应用X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱和N₂物理吸附等手段对催化剂进行表征, 并以λ>400 nm的可见光作为光源, 评价了该催化剂光催化降解亚甲基蓝(MB)的活性. 实验结果表明, 直径为4 nm的金颗粒完好地负载在介孔氧化亚铜的表面, 并且介孔氧化亚铜的细微结构与孔径均未发生变化. 研究表明, 以乙醇作为反应溶剂有效抑制了AuCl₄^-与Cu₂O之间的氧化还原反应, 从而有利于氧化亚铜介孔结构的保持及金颗粒的原位还原. 光催化降解亚甲基蓝的结果表明, Au/Cu₂O异质结构的光催化活性比纯氧化亚铜光催化活性有明显提高. 推测其光催化性能提高的主要原因如下: 一方面, 金颗粒良好的导电性有利于氧化亚铜表面电子的快速转移, 实现电子-空穴分离; 另一方面, 金颗粒可能存在的表面等离子共振现象加速了光生电子的产生.     

The effect of Sn dopant on crystal structure and photocatalytic behavior of nanostructured titania thin films

In this study, preparation of Sn doped (0–30 mol % Sn) TiO₂ dip-coated thin films on glazed porcelain substrates via sol–gel process have been investigated. The effects of Sn content on the structural, optical, and photo-catalytic properties of applied thin films have been studied by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), field emission SEM (FE-SEM), and high resolution transmission electron microscopy (HR-TEM). Surface topography and surface chemical state of thin films were examined by atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS). XRD patterns showed an increase in peak intensities of the rutile crystalline phase by increasing the Sn dopant. The prepared Sn-doped TiO₂ photo-catalyst films showed optical absorption edge in the visible light area and exhibited excellent photo-catalytic ability for degradation of methylene blue solution under UV irradiation. The result shows that doping an appropriate amount of Sn can effectively improve the photo-catalytic activity of TiO₂ thin films, and the optimum dopant amount is found to be 15 mol%. The Sn⁴⁺ dopants substituted Ti⁴⁺ in the lattice of TiO₂ and increased surface oxygen vacancies and the surface hydroxyl groups. TEM results showed small increase in planar spacing (was detected by HR-TEM caused by Sn dopants in titania based crystals).     

Preparation of BiVO4 Hollow Spheres and its Photocatalytic Degradation of Methylene Blue

Monoclinic BiVO₄ hollow nanospheres were successfully prepared via template-free method using citric acid (C₆H₈O₇) as chelating agent and characterized by X-ray diffraction patterns, transmission electron microscope, UV-Vis DRS, and TG-DTA technique. C₆H₈O₇ played an important role in the formation of hollow spheres. Morphology observations revealed that when appropriate amount ofC₆H₈O₇ was introduced, the cavity with the diameter of 40 nm was obtained in BiVO₄ nanospheres. UV-Vis diffuse reflectance spectra indicated that the samples had absorption in both UV and visible light region. The photocatalytic activities were evaluated by the degradation of methylene blue under Xe lamp irradiation. Hollow spheres endow BiVO₄samples with greatly improved photocatalytic activity. A possible formation mechanism of hollow spheres was proposed.     

Dye degradation studies of Mo‐doped TiO2 thin films developed by reactive sputtering

TiO₂ thin films with various Mo concentrations have been deposited on glass and n‐type silicon (100) substrates by this radio‐frequency (RF) reactive magnetron sputtering at 400°C substrate temperature. The crystal structure, surface morphology, composition, and elemental oxidation states of the films have been analyzed by using X‐ray diffraction, field emission scanning electron microscopy, atomic force microscopy, and X‐ray photoelectron spectroscopy, respectively. Ultraviolet‐visible spectroscopy has been used to investigate the degradation, transmittance, and absorption properties of doped and undoped TiO₂ films. The photocatalytic degradation activity of the films was evaluated by using methylene blue under a light intensity of 100 mW cm⁻². The X‐ray diffraction patterns show the presence of anatase phase of TiO₂ in the developed films. X‐ray photoelectron spectroscopy studies have confirmed that Mo is present only as Mo⁶⁺ ions in all films. The Mo/TiO₂ band gap decreases from ~3.3 to 3.1 eV with increasing Mo dopant concentrations. Dye degradation of ~60% is observed in Mo/TiO₂ samples, which is much higher than that of pure TiO₂.     

Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Facile one-pot hydrothermal synthesis of B/N-codoped TiO2 hollow spheres with enhanced visible-light photocatalytic activity and photoelectrochemical property

B/N-codoped TiO₂ hollow spheres (B/N-THs) were synthesized by facile one-pot hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, UV–vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The B/N-THs have large surface areas (up to 172.1 m² g⁻¹). The photocatalytic activities of as-prepared THs were evaluated by degradation of Reactive Brilliant Red dye X-3B solution under visible light irradiation. The results showed that B/N-THs exhibited the highest photocatalytic activity due to their high surface area and synergetic effect of B/N-codoped. A photocurrent–time spectrum was examined by anodic photocurrent response to characterize the electron-transferring efficiency in the process of photocatalysis reaction.