行波电极硅-有机复合集成电光调制器理论分析与实验研究

对基于行波电极的硅-有机复合集成电光调制器进行研究,构建调制器的波导电极结构模型,分析特征阻抗和微波有效折射率对调制器频率响应的影响。通过对电极结构的仿真优化,完成调制器芯片的设计与制备,研究电光聚合物材料的片上极化工艺,得到高性能硅-有机复合集成电光调制器。对研制调制器电极的电学S(Scatter)参数进行测试,分析得到的电极特征阻抗和有效折射率与仿真设计结果基本相符。测试得到电光调制器的3 dB带宽大于50 GHz。     

基于Wheeler's Conforming Mapping扩展变换法的聚合物电光调制器特性研究

基于Wheeler变换模型,提出了一种分析多层介质微波特征参数的方法--Wheeler's Conforming Mapping扩展变换法,并利用该方法得到了微波特征参数与各层介质参数之间的表达式,在此基础上分析了微带电极的微波特性参数. 与准静态有限元法(QS-FEM)相比,Wheeler's Conforming Mapping扩展变换法不仅计算准确而且具有更高的计算效率. 将该方法应用于聚合物电光调制器的特性研究,对传统模型进行改进,通过添加补偿层来调整微波等效折射率和特征阻抗,改善微波与光波有效折射率的失配度,在理论上实现了聚合物电光调制器的速率和阻抗的同时匹配. 关键词： Wheeler扩展变换法 微带电极 特征参数 等效介电常数     

基于有机聚合物的M-Z波导设计

M-Z光波导是有机聚合物电光调制器的重要结构单元.将有效折射率法与二维差分束传播法相结合,利用有效折射率法计算了聚合物脊形波导的横向折射率分布及有效折射率.由Maxwell方程出发,结合辐射透明边界条件,采用Crank-Nicholson差分格式,得出有限差分束传播法的计算格式.通过对M-Z型波导结构中TM模的传播及损...     

基于电光聚合物的表面等离激元调制器

基于电光聚合物,提出了一种结构简单,尺寸小,效率高的表面等离激元(SPP)调制器.该调制器采用M-Z干涉仪结构的金属波导,金属周围是均匀极化后的电光聚合物,通过在金属波导两臂间加电压对聚合物折射率进行调制,折射率调制再通过M-Z干涉仪结构转化为对金属波导中SPP强度的调制. 通过求解金属波导附近的电场分布,并结合SPP场分布的特点,在理论上说明了这种结构可以通过外加电压有效地调制金属波导输出端SPP的强度,调制所需的半波电压约为2.8V. 关键词： 表面等离激元 电光调制 电光聚合物     

聚合物电光调制器中M-Z波导TM模分析

M-Z光波导是聚合物电光调制器的重要结构单元。利用有效折射率法计算聚合物脊形波导的横向折射率分布，将三维光波场传播简化为二维传播。从导模满足的标量波动方程出发，结合透明边界条件，采用Crank-Nicholson差分格式，得出有限差分束传播法的基本计算格式。通过对M Z型波导结构中TM模的传播及损耗特性进行理论分析，系统地研究了脊宽、分支角等结构参数对损耗的影响。研究表明，有效折射率法与二维有限差分束传播法的结合可以较好地解决脊形M Z波导的设计问题。该方法具有精度高、计算量小及效率高等优点，为聚合物电光调制器的制备提供了理论依据。     

一种基于光学偏置的新型Math—Zehnder调制器结构设计

设计了一种基于光学偏置并以有机聚合物PMMA／DRI作为光波导材料的新型Mach-Zehdner调制器。利用有效折射率法（EIM）,分析了脊波导的有效折射率随脊波导结构参数变化情况,包括脊宽训、脊高b和芯层厚度d,以及上下包层厚度。采用微带线单电极调制方式结合脊波导的结构设计,实现了微波和光波的速率匹配。针对优化的结构参数,采用BPM方法进行光场和功率传输的模拟仿真,完成了非等臂Math—Zehnder调制器的结构设计,实现了两臂89．84。的初始相位差,消光比约为27dB。     

瑞利布里渊光时域分析系统中电光调制器的理论模型与实验研究

瑞利布里渊光时域分析系统能够以非破坏性方式实现单光源、单端工作,利用强度型电光调制器同时调制脉冲基底和脉冲信号是获得该系统所需连续光和脉冲光的关键技术.本文理论分析、仿真和实验研究了一种将脉冲信号输入到电光调制器偏置端、微波信号输入到电光调制器射频端同时调制脉冲基底和脉冲信号的新调制方法,探讨了电光调制器用于瑞利布里渊光时域分析系统时的最佳工作点问题.结果表明,当调制脉冲基底和脉冲时分别将电光调制器偏置在传输曲线的谷点和峰点,并根据实际系统的组成和性能指标要求选择合适的微波调制信号幅度,可获得满足瑞利布里渊光时域分析系统要求的连续光和脉冲光.本文的研究结果为瑞利布里渊光时域分析系统的最佳化设计提供了理论依据.     

瑞利布里渊光时域分析系统中电光调制器的理论模型与实验研究

瑞利布里渊光时域分析系统能够以非破坏性方式实现单光源、单端工作,利用强度型电光调制器同时调制脉冲基底和脉冲信号是获得该系统所需连续光和脉冲光的关键技术.本文理论分析、仿真和实验研究了一种将脉冲信号输入到电光调制器偏置端、微波信号输入到电光调制器射频端同时调制脉冲基底和脉冲信号的新调制方法,探讨了电光调制器用于瑞利布里渊光时域分析系统时的最佳工作点问题.结果表明,当调制脉冲基底和脉冲时分别将电光调制器偏置在传输曲线的谷点和峰点,并根据实际系统的组成和性能指标要求选择合适的微波调制信号幅度,可获得满足瑞利布里渊光时域分析系统要求的连续光和脉冲光.本文的研究结果为瑞利布里渊光时域分析系统的最佳化设计提供了理论依据.     

M-Z型极化DANS聚合物电光波导强度调制器研究

研究了Mach-Zehnder型极化聚合物电光波导强度调制器的制备工艺.器件采用DANS (4-dimethylamino-4′nitro-stlibene)聚合物为电光波导材料，由电光波导层、上下介质缓冲层、上下金属电极层构成五层波导结构.对五层光波导各层之间的光学、化学以及微加工工艺的相互兼容性进行了深入研究.采用紫外光漂白方法制备出侧壁光滑的条波导，采用钨丝电晕极化方法对DANS聚合物波导进行有效极化，使其具有电光特性.通过优化器件制备工艺，研制出工作波长为1300 nm的M-Z型电光波导强度调制器原型器件.实验测得器件半波电压约为10 V，调制带宽约为1 GHz.     

电光调制在被动综合孔径成像探测中的应用

介绍了一种新型被动综合孔径成像探测方法:视场辐射信号被接收和放大后,通过电光幅度调制将其幅度和相位信息加载到光波上,经光纤传输在末端形成阵列,通过光学系统直接成像,将视场实时恢复出来.该方法可实现工作在微波、毫米波和太赫兹波段的高分辨力实时成像探测的目的.深入分析了电光调制器在综合孔径成像探测中的应用,建立电光调制模型,讨论了在小信号调制下的电光幅度调制近似理论.通过数值计算与仿真分析,得到综合孔径成像探测中电光调制器的调制信号强度限制的有关结论.结果表明,利用上变频电光调制技术和光信息处理,所得到的成像仿真图的半峰全宽和信噪比性能都优于传统的基于下变频技术的成像仿真结果.     

用于获取大调制度的驻波型电光调制器的设计与制作

设计并制作了一种采用微波驻波电极的电光调制器,该调制器被用于光谱展宽。通过非周期极性反转方法,在１６．２５ＧＨｚ的调制频率下实现了微波驻波与光波的相位匹配,从而获得了大调制度。实验中光谱展宽达到２．５ＴＨｚ。     

Investigation of multilayer microstrip electrode for an asymmetric Mach–Zehnder modulator

In the condition of velocity matching and impedance matching, Mach–Zehnder modulator can obtain large bandwidth and low driving voltage. Based on Wheeler’s transformation of multilayer microstrip line, effective permittivity of microwave has been analyzed. Both the microwave index and characteristic impedance are affected by the thickness and the width of microstrip electrode. In order to achieve velocity matching and impedance matching simultaneously, a compensation layer is placed on the electrode. The optimal thicknesses of the electrode and the compensation layer as well as the width of electrode have been obtained. Based on single-mode condition, an asymmetric Mach–Zehnder modulator (AMZM) has been designed and simulated by effective index method and finite-difference beam propagation method (FD-BPM). The initial phase difference between the two arms of the modulator has been achieved 0.522π in the linear region. Comparing with the typical MZM, AMZM can get a larger value of f _3dB , increased by 67.32%.     

Ultra-Broad-Band LiNbO3 Electro-Optic Modulators with Novel Complex Electrode

The characteristics of Z- cut LiNbO3 optical modulators with novel complex electrode are discussed by using the finite element method (FEM) and studied experimentally in this paper. The travelling wave electrode consists of upper and lower parts. It can easily realize phase velocity matching between microwave and optical wave and drastically reduce microwave electrode loss. An electrooptic modulator with larger than 100 GHz bandwidth and half wave voltage 6 V is designed, fabricated and measured. Vπ is 5.1 V and the attenuation coefficient a0 is 0.3 dB/(cm· GHz1/2 ). The experimental results show that the modulator has great potentiality for expanding bandwidth.     

Ultra-Broad-Band LiNbO_3 Electro-Optic Modulators with Novel Complex Electrode

1 IntroductionFOr LiNbO3 modulators, the bandwidth is mainly restricted by the microwaveattenuation of the travelling--wave electrode and the phase velocity ndsmatch betWeenmicrowave and optical wave in the devices. When the phase velocity matching issatisfied it is very i~rtant to decrease the microwave attenuation for expandingbandwidth. The thecrowave propagating lOSS is the main source Of the microwaveattenuation in the interactive region. The larger the cross-sectional area or the lOn…     

Broadband and low-driving-power LiNbO<Subscript>3</Subscript>electrooptic modulators

Microwave and optical properties of lithium niobate electrooptic modulators are investigated in this paper. The effect of simultaneous matching of optical and microwave velocities and impedance matching, conductor loss, dielectric loss on the optical bandwidth of an ultra-high-speed lithium niobate modulator are presented here. The metal electrode design, buffer thickness, ridge depth, and the gap between electrodes at different operating frequencies on device performance are thoroughly investigated by using the finite element method.     

Hybrid Electrodes Used in Polymer Electro-Optic Modulator with Ultra-Broadband

Hybrid electrode combined coplanar waveguide (CPW) and microstrip lines in ultra-broadband electro-optic modulators. The characteristics of the modulators with hybrid electrode is like that of the modulator with the microstrip lines, in which the microstrip electrode is loaded above only one arm of Mach-Zehnder (M-Z) optical waveguide, besides the problem of microstrip line to coaxial transition and corona polarization in polymer modulators have been best solved at the same time. By using finite element method (FEM), the characteristic parameters such as half-wave voltage, modulation bandwidth characteristic impedance, effective microwave refractive index of polymer modulators with microstrip line and hybrid electrode are analysed and compared in this paper. The results present that velocity match, impendence match and lower microwave propagating loss is easily realized in modulators with hybrid electrode.     

一种基于导模共振的电光调制器研究

实验研究了基于导模共振的反射型电光调制器采用的棱镜耦合方式,在棱镜上面镀有4层膜,依次为银膜下电极-极化聚合物-缓冲层-金膜上电极。对这种衰减全反射（ATR）型的聚合物波导电光调制器进行了视频调制实验,采用静态偏置电压稳定模式同步角方法,结合对入射激光束进行监测,解决了视频调制中激光器噪声对模拟信号调制影响的问题,提高了工作稳定性。实验结果表明：该电光调制器具有良好的线性和较高的灵敏度。     

High-Speed Coplanar Waveguide Based Submount for 40 Gbit/s Electroabsorption Modulator

A high-speed submount has been designed and fabricated for 40 Gb/s electroabsorption (EA) modulators. The submount contains a coplanar waveguide (CPW) for microwave signal feeding and a Ta₂N thin-film resistor for impedance matching. The CPW transmission line is designed to ensure low microwave loss and reflection, and Ti/Cu/Ni/Au metal is adopted for electrode fabrication to guarantee good contact with the Ta₂N thin-film. The typical reflection coefficient of fabricated submount is estimated to be lower than−21 dB up to 40 GHz. As a demonstration, a high-speed EA modulator was chip-level packaged using the high-speed submount, and the measured small-signal modulation bandwidth was over 40 GHz.     

超宽带聚合物调制器的优化设计

设计了一种以聚合物作为材料的低损耗、宽带宽的Mach—Zehnder光波导调制器。分析了调制器的脊波导的模式特性,设计了脊波导的结构,并使用BPM软件模拟了脊形波导的光场分布;通过对光场分布的分析,优化了脊形波导的宽度Wg,脊高6,芯层高度H。同时对聚合物调制器的电极进行了优化,包括电极宽度W和电极间距D,使得调制器有较小的导体损耗以及较好的阻抗匹配。并结合了脊波导的结构参数和电极的优化参数,给出了优化结果,它能够使微波的有效折射率与光波的有效折射率达到匹配,从而使带宽达到177GHz,导体损耗为0．2569dB／cm·GHz1／2。