Guided modes in slab waveguides with a left handed material cover or substrate

We study guided modes propagating along a dielectric slab waveguide with a left handed material (LHM) cover or substrate. The dispersion relation is derived by using normalized waveguide parameters. An analytical method is then proposed to calculate the universal dispersion curves. Different from a slab waveguide with a LHM core, we find that guidance properties are strongly dependent on dielectric permittivity ε and magnetic permeability μ of the substrate and cover layers. For oscillating guided modes, fundamental zero order mode is not always absence, sometimes it exists in a restricted range of normalized propagation constant. First order mode behaves as other higher order modes and exists up to infinite high frequency. Higher order modes have no double degeneracy in the case of LHM cover layer. For surface guided modes, the existence and the type of the mode solutions with respect to different parameters are classified systematically and discussed in detail. Unlike a slab waveguide with a LHM core where the dispersion curve of TE₁ surface mode continues with that of oscillating TE₁ mode, the dispersion curve of TE₁ surface mode continues with that of oscillating TE₀ mode. It seems that the two different kinds of modes compensate each other to form one whole mode. Both TE and TM guided modes are discussed.     

Analysis of Circular Dielectric Waveguide with Chiral Cladding

The propagation characteristics of a circular dielectric waveguide with chiral media filled in the cladding are investigated. The relation between the cutoff frequency and the chiral admittance, the dispersion curves for some modes with different angular mode numbers and the transverse distribution of fields are presented. Some new features different from the ordinary circular dielectric waveguide are resulted. The results show that the cladding chirality may lead to a single-mode operation in the circular dielectric waveguide.     

圆介质参考波导特征方程的近似式及其应用

本文将作为参考波导的圆介质波导模式的特征方程进行了有效的近似简化,使之成为独立的四个简单特征方程组。利用这些方程组作为参考波导的特征方程来计算各种复杂波导的传输参数时,能够大大简化计算工作。     

Millimeter-wave mode conversions at dielectric waveguide steps

The conversion of guided modes (TE₀ and TE₁) at a rectangular step on a dielectric slab waveguide is investigated with mm microwaves. The power of the modes is measured from their interference patterns in the evanescent field outside the waveguide slab. The relative power of two modes changes periodically when the length of the step is varied. In the experiments a change of up to three orders of magnitude was measured. The step is considered as a sequence of three waveguide sections of different thickness. At the discontinuities the modal fields are assumed to illuminate the next section. The calculation based on this model agrees with the experimental results.     

薄板型介质材料复介电常数的无损测量

采用带法兰结构的TE01n圆柱谐振腔,用无损检测的方法测量薄板型微波介质材料的复介电常数。利用轴向模式匹配法对谐振腔内的电磁场进行了求解,给出了相对介电常数和损耗角正切的计算公式,并利用矢量网络分析仪对几种常用微波介质材料进行了测量,其结果表明:该测量方法对相对介电常数的测量误差不超过1%,而对损耗角正切的测量误差不超过10%。该方法还具备一腔多模的测试能力,测量频率可调,可用于介质材料频率特性的测量。     

Optical waveguiding in semiconductor injection lasers and integrated optics

Weak perturbations from various refractive index distributions have been introduced into the central layer of the three layered dielectric slab optical waveguide model and solutions of the wave equation in this guide for TE modes have been compared with the results published for the unperturbed mode. The perturbations in general introduce quadrature components in the transverse modes and a mode width dependent amplitude. The mode position within the guide can be shifted and the mode width increased or decreased. With increasing parabolic perturbation there is increasing waveguide discrimination against higher order modes.     

包含左手材料的四层平板波导中的光导模

研究一个芯子层是左手材料,其他三层由传统材料构成的四层平板光波导系统,利用图解法对各种TE偏振的导波模式的解进行详细分析.研究表明,四层左手材料光波导既能支持振荡导模,也能支持表面导模,与三层左手材料光波导相比较,此四层波导的导波模式呈现一些新的特性.对于中间传统材料层存在振荡场的情形:芯子层支持振荡导模的光波导中存在基模,并且高阶振荡导模出现模式缺失的性质;芯子层支持表面导模的光波导可以支持基模和多个高阶模式,并且存在模式兼并的性质.对于中间传统材料层存在衰减场的情形,此四层波导结构可等效为三层左手材料光波导.这些新的光波导传输性质对各种光波导器件的制作有潜在的应用价值.     

Characteristics analysis of hybrid plasmonic waveguide for low-loss lightwave guiding

It has been experimentally demonstrated that a low-loss guided hybrid mode is supported if a metal strip is embedded in a low index polymer layer surrounded by two high index slabs. In this paper, further numerical analyses on the guided hybrid modes are reported to fully elucidate the characteristics of the hybrid plasmonic waveguide. For a one-dimensional slab structure with a metal film of infinite width, simulation results exhibit that low-loss guided hybrid modes are associated with surface plasmon modes and dual dielectric slab modes. The optical properties of the guided modes are improved by increasing the field intensity which is confined into lossless dielectric layers by decreasing the metal film thickness and increasing the refractive index and thickness of the high-index slabs. The finite element method is used to investigate the lateral mode confinement of the optical guided modes by the corresponding metal strip. By reducing the metal film width, the guided modes are confined in the plane transverse to the direction of propagation and the characteristics are significantly improved. The hybrid plasmonic waveguide can be exploited for long-range propagation-based application such as optical interconnection.     

Reflection and transmission of an Airy beam in a dielectric slab

The reflection and transmission of a finite-power Airy beam incident on a dielectric slab are investigated by an analytical method. Based on the plane-wave angular spectrum expansion and Fresnel approximation, the analytical expressions of the reflected field, internal field as well as transmitted field in each region are obtained. Through numerical simulations, the intensity distributions of the incident beam, reflected beam, internal beam as well as transmitted beam are presented at oblique incidence. Besides, we also compare the intensity distributions of the geometrical-optics beam field, the first order beam mode field and the actual beam field, which indicates that the contribution of each order beam mode field to the actual beam field is related to the refractive index of the dielectric slab. Meanwhile, the reflection characteristics of the Airy beams in the special cases of Brewster incidence and total reflection are investigated. Finally, the effects of the optical thickness and refractive index of the dielectric slab on the peak intensity distributions and beam shifts of the reflected and transmitted beams are also discussed in detail. The analytical and numerical results will be useful to analyze the propagation dynamics of Airy beam in the dielectric slab and provide some theoretical supports to the design of optical film.     

Mode order converter

We report experimental results with a simple mode order converter for dielectric slab waveguides. In particular we have shown conversion of higher order modes to the only mode of a monomode waveguide.     

Linear and nonlinear coupling properties of a novel multicore circular dielectric waveguide

In this work we investigate the linear and nonlinear coupling properties of a novel multicore circular dielectric waveguide. The proposed device consists of a circular central core and many circular sectoral cores at the periphery, while the whole structure can be considered as a nonlinear multicore composite optical coupler. Hybrid guided modes in a circular sectoral dielectric waveguide are derived using circular harmonic expansion for the electromagnetic fields and the Point Matching Method (PMM) for the application of boundary conditions. Several cases are investigated varying some of the parameters of the geometry and the optical frequency in order to produce dispersion diagrams. In advance, the electric and magnetic field distributions for the fundamental guided modes are produced, while linear and nonlinear coupling coefficients as well as the sectoral waveguide mode effective area are derived.     

单轴各向异性异向介质平板波导中的导模特性

 推导了介电常数张量和磁导率张量中各分量带有不同符号的单轴各向异性异向介质平板波导的导行条件。根据分量符号的正负组合，分情况讨论了导行TE波的偶模特性，画出了平板波导中为实横波数时的布里渊图。结果表明，在特定条件下此平板波导中有无穷多导模，这与传统介质波导及各向同性异向介质平板中只有有限数量模式存在有很大不同。此外，还发现当分量参数满足一定条件时，出现了多个虚横波数的传输模式解，并且该模式存在高频截止。     

Radiation modes of a five-layer symmetric slab waveguide

The radiation modes of a five-layered symmetric slab waveguide are treated in detail. Since the slab is assumed to be infinitely extended in the yz plane, all field quantities are considered to be independent of y. The analysis is based on modal expansion formulation and the modes can be classified as TE and TM as well as even and odd ones. Applying the boundary conditions at interfaces, the expansion coefficients of the field components are easily calculated. In addition, the normalization factors and the orthogonality properties are determined by deriving appropriate integrals over the cross section of the waveguide. Finally, the validity of the orthogonality relations between the radiation modes and the guided ones, which propagate in such a waveguide, is proved explicitly.     

Periodicity-suppressing effect of periodic lossy-dielectric-loaded cylindrical waveguide

Periodic dielectric-loaded waveguide is one of the diaphragmatic waveguides.For the excellent mode-selective propagation ability,it is of value for applications in gyrotron-traveling-wave amplifiers(gyro-TWT),accelerators,and other microwave propagation systems.This paper focuses on studying the application of the strong lossy-dielectricloaded periodic waveguide in millimeter-wave gyro-TWT.It is revealed that due to the lossy property of the dielectric,the energy in the dielectric slots is absorbed effectively and the high order Bloch harmonics induced by the periodicity of the structure are suppressed,which changes the discrete spectrum under lossless condition into a continuous one.As a result,the periodicity of the system is severely suppressed and a mode in the hollow region could be approximated by a fast wave mode in an empty waveguide.These results bring specific guidance for the applications of the lossy dielectric-loaded waveguide in gyro-TWTs and other devices.     

Design of a novel wideband single-mode waveguide in a photonic crystal slab structure

We propose a novel photonic crystal slab waveguide that provides a single-mode band with large bandwidth. The proposed waveguide is obtained by introducing a line defect in a triangular lattice of air holes in a dielectric slab. This line defect consists of holes which are not located in the original lattice points. The plane wave expansion (PWE) method is used to extract the band diagram of guiding modes and based on the results, photonic crystal holes in the defect row and its adjacent rows are modified to maximize the waveguide bandwidth. We show that using the proposed structure, a single-mode bandwidth of 17% can be achieved.     

Guided-Wave Characteristics with Periodic Dielectric Waveguides of Finite Length

A novel network approach is proposed to analyze periodic dielectric waveguide of finite length. Our approximate analysis is to consider a bounded waveguide problem in which perfectly-conducting walls are introduced, and the periodic corrugation is regarded as consisting of step discontinuities connected by a length of uniform slab waveguide. Application of conservation of complex power technique (CCPT) allows us to take into account of both surface modes and only a few non-surface-modes, and readily derive propagation characteristics of the wave-guide with finite periodic corrugations around Bragg interaction region.     

Dispersionless slow light by photonic crystal slab waveguide with innermost elliptical air holes

We report a low-loss photonic crystal slab waveguide formed by deforming the innermost circle air holes in the conventional photonic crystal slab waveguide into elliptical ones. We obtain the photonic bands and group index of guided modes in this photonic crystal waveguide by guided-mode expansion method and investigate the dependence of photonic bands and group index of guided modes on the parameters of the innermost elliptical air holes. The group velocity and group velocity dispersion of this waveguide strongly depend on the innermost elliptical air holes. Photonic crystal slab waveguide with the optimum innermost elliptical air holes possesses a wider single mode region below the light line, in which light can easily propagate without intrinsic loss. At the same time, the guided mode supported by this waveguide has nearly constant group velocity and vanishing group velocity dispersion in a 3-5 nm bandwidth.     

转移矩阵法在负折射率介质材料平板波导中的应用研究

利用严格电磁理论，推导出了适用于负折射率介质材料光波导的转移矩阵，分析讨论了转移矩阵的性质和应用.利用转移矩阵方法，推导出导波层为负折射率介质材料、覆盖层和衬底为右手材料的三层对称介质光波导的本征色散方程.用图解法研究了负折射率介质波导中TE波的异常色散特性.在负折射材料介质波导中没有零阶模，最低阶为1阶模，并且有截止频率,只有波导参量满足一定条件的时候才会存在，导模的横向波数可以为实数和纯虚数，而正折射率介质波导导模的横向波数只能为实数.     

Propagation of soliton waves in nonlinear dielectric slab waveguides of parabolic index of refraction

The pulse propagation in a non-linear slab waveguide of parabolic index of refraction is treated by using differential equation techniques. A graded index dielectric slab waveguide free of material dispersion with a cubic order non-linearity is considered. The electromagnetic wave inside the waveguide is described in terms of a non-linear equation. Slowly varying envelope function representation is employed to develop a non-linear partial differential equation for the unknown envelope function of the electric field. An averaging method over the transverse direction is applied to reduce the unknown envelope function non-linear differential equation into a form resembling the well known non-linear Schrödinger differential equation. This equation is solved by applying the Inverse Scattering Method. The N-soliton solution is developed and presented explicitly for the practical case of the single mode dielectric slab waveguide. Numerical results presenting single and double soliton propagation are also given.     

Coupled mode analysis of light modulation in dielectric waveguides

A detailed analysis of electrooptic light modulation in optical waveguides is presented. Several important problems of a waveguide modulator, such as the difference of waveguide axes from crystalline electrooptic ones, the distribution of transverse and longitudinal field components of light modes, and the traveling-wave property of the modulating field, are discussed. The analysis is based on the coupled mode theory, regarding the modulation as the coupling among sidebands of unperturbed waveguide modes. The coupled mode equation is derived for the modulation in optical waveguides. It can be solved if the normal modes of the waveguide are given. Actually the equation is solved for the modulation in dielectric slab waveguides and the mechanism of modulation is discussed. The results of the analysis are applied to designing two types of waveguide modulators. In an example (10.6 μm modulator with a GaAs slab waveguide) a new efficient crystal orientation is found. The calculated phase retardation with this orientation is 0.13 rad/(V·cm) with a 1 μm thick slab. Another example of a 0.633 μm modulator using a LiTaO₃ crystal as a substrate is also described.