On the origin of the giant magnetic moments of Fe and Co in Cs Films

To unravel the mystery of the recently observed giant magnetic moments of Fe and Co in Cs films, orbital-polarization corrected relativistic spin density functional calculations have been performed. Unlike other transition–metal systems where the orbital magnetic moments are quenched, Fe and Co in Cs as well as in other alkali metals are found to possess a giant orbital moment of 2–3 μ_B along with a large spin moment. Also, these free atom-like spin and orbital magnetic moments in Cs would not be squashed under large lattice contractions up to 23% around the impurity atoms. The induced moments on the host atoms are small. The results offer an explanation for the origin of the giant magnetic moments of Fe and Co in Cs films.     

Field dependence of spin and orbital moments of Fe in L10 FePt magnetic thin films

The field dependence of spin and orbital magnetic moments of Fe in L1₀ FePt magnetic thin films was investigated using X-ray magnetic circular dichroism (XMCD). The spin and orbital moments were calculated using the sum rules; it was found that the spin and orbital moment of Fe in L1₀ FePt films are ∼2.5 and 0.2 μ_B, respectively. The relative XMCD asymmetry at Fe L₃ peak on the dependence of applied field suggested that the majority magnetic moment of L1₀ FePt films resulted from Fe.     

Electronic and magnetic properties of free and supported transition metal clusters

The spin-polarized relativistic version of the multiple scattering or the Korringa–Kohn–Rostoker method for electronic structure calculations has been used to study the electronic and magnetic properties of free and supported transition metal clusters. Corresponding results are presented for the spin- and spin–orbit-induced orbital magnetic moments in free Fe and FePt clusters. For both systems a pronounced enhancement is found for the spin as well as for the orbital moments compared with the corresponding bulk value which diminishes in an oscillatory fashion with increasing cluster size. Corresponding investigations on small Co clusters deposited on a Pt (111) surface also revealed a strong dependence of the magnetic properties on the cluster size and shape. A comparison of our theoretical results with available experimental data led to rather satisfying agreement.     

CoPt(FePt)-C纳米复合膜的结构与磁性

用磁过滤脉冲真空电弧沉积方法制备了CoPt(FePt) C纳米复合薄膜，并在不同温度下进行了退火处理，研究了薄膜中碳的含量以及退火温度对薄膜结构与磁性能的影响.制备态薄膜经过足够高的温度退火后，x射线衍射和磁力显微镜分析发现，在碳基质中生成了面心四方相的CoPt(FePt)纳米颗粒.对于特定组分为Co24Pt31C45和Fe43Pt35C22的薄膜，矫顽力以及颗粒尺寸都随退火温度的升高而增大，当退火温度为700℃时，Co24Pt31C45薄膜的矫顽力为21×105A/m，晶粒尺寸为17nm;当退火温度为650℃时，Fe43Pt35C22相应值分别为28×105A/m和105nm. 关键词： 磁记录材料 磁性薄膜 CoPt FePt纳米复合薄膜     

Orbital moments of 3d adatoms and Co nanostructures on Cu(0 0 1) surfaces

We use ab initio calculations to investigate spin and orbital moments of 3d transition-metal adatoms and Co nanostructures on Cu(0 0 1) surfaces. For Fe and Co adatoms on Cu(0 0 1) we predict extremely large orbital moments, comparable to the spin moments at these sites. For Mn and Cr adatoms the orbital moments are extremely small and can be neglected in face of their rather large spin moments. Ni adatoms on Cu(0 0 1) were found to be non-magnetic. Our investigations for adsorbed flat clusters of Co on Cu(0 0 1) address the persistence and extent of these large orbital moments in the clusters as a function of their size. We find that, the average orbital moment (M_orb) per Co atom is strongly correlated with the coordination number, decreasing drastically and monotonically as the average number of first Co neighbors around the sites in the cluster (N_Co) is increased.     

Field dependence of orbital magnetic moments in the Heusler compounds Co<Subscript>2</Subscript>FeAl and Co<Subscript>2</Subscript>Cr<Subscript>0.6</Subscript>Fe<Subscript>0.4</Subscript>Al

Orbital and spin magnetic moments of the Heusler compounds Co₂FeAl and Co₂Cr_0.6Fe_0.4Al were measured by magnetic circular dichroism in X-ray absorption (XMCD). The orbital magnetic moments per spin are quite large (0.1–0.2) compared to bulk values of Fe and Co metals, indicating a considerable spin–orbit coupling in these Heusler compounds. A strong localization of the 3d electron states might be responsible for this observation. The Co and Fe orbital to spin moment ratio shows a distinct decrease of r(Fe)=0.04±0.02 and r(Co)=0.06±0.02 with increasing external field for the ternary compound Co₂FeAl, while the ratio is within error limits independent of the field for Co₂Cr_0.6Fe_0.4Al. This is discussed in terms of a relation to magnetocrystalline anisotropies. PACS 75.50.Cc; 71.20.Lp; 78.40.Kc     

Spin reorientation transition in (111) textured L10 CoPt layers

In this work, a spin reorientation transition from [001] axis to an in-plane direction occurs near Curie temperature under a small external field for (111) textured L1₀ CoPt layers in an AlN/CoPt multilayer film, indicating the dominant role of the shape anisotropy at elevated temperatures over the magnetocrystalline anisotropy. A large in-plane residual magnetization is also observed after cooling the sample from a temperature above the Curie point. The formation of magnetization during cooling is considered due to the alignment of magnetic moments along the easy axis by the small field in the spin reorientation transition temperature region. Our work reveals the importance of shape anisotropy for the formation of magnetization in the heat assisted magnetic recording process.     

Direct observation of a bulklike spin moment at the Fe/GaAs(100)-4x6 interface

We have used x-ray magnetic circular dichroism, which offers a unique capability to give element specific information at submonolayer sensitivity, to determine the spin and orbital magnetic moments at the Fe/GaAs(100) interface. The wedge samples, grown by molecular beam epitaxy at room temperature, consisted of 0.25-1 monolayer (ML) Fe on GaAs(100)-4x6 capped with 9 ML Co and have shown Fe spin moments of (1.84-1.96)micro(B) and a large orbital enhancement. Our results demonstrate unambiguously that the Fe/GaAs(100)-4x6 interface is ferromagnetic with a bulklike spin moment, which is highly promising for spintronics applications.     

Spin and orbital magnetic moments of Fe3O4

We present measurements of the spin and orbital magnetic moments of Fe3O4 by using SQUID and magnetic circular dichroism in soft x-ray absorption. The measurements show that Fe3O4 has a noninteger spin moment, in contrast to its predicted half-metallic feature. Fe3O4 also exhibits a large unquenched orbital moment. Calculations using the local density approximation including the Hubbard U method and the configuration interaction cluster-model suggest that strong correlations and spin-orbit interaction of the 3d electrons result in the noninteger spin and large orbital moments of Fe3O4.     

Thermal stability of spin valve sensors using artificial Co/Ir based ferrimagnets

Hard-soft spin valve structures have been grown by molecular beam epitaxy on MgO(0 0 1) substrates. The hard magnetic layer consists of an artificial Co/Ir/Co ferrimagnet system (AFi), while a Fe/Co bilayer from the buffer has been used as a soft detection layer. The Fe layer has been grown at 600°C giving rise to a monocrystalline layer with a BCC structure. Consequently, this layer presents a hard and a easy magnetization axis, respectively, along the BCC [1 1 0] and the [1 0 0] directions. The AFi system presents dramatic differences after successive annealing steps up to 350°C. An increase of the GMR from 3% to 3.5% is observed after annealing at 250°C while the coercive field of the AFi and the GMR plateau are strongly reduced. After further annealing at higher temperature the GMR drops down accompanied with a strong decrease in the antiparallel alignment amount in the AFi system. Rutherford back scattering measurements have been performed to investigate the changes in the interface morphology and to correlate it to the magneto-transport properties.     

Theoretical study of the magnetic moments and anisotropy energy of CoRh nanoparticles

The role of size, structure and chemical order on the magnetic moments and magnetic anisotropy energy (MAE) of CoRh nanoparticles are studied in the framework of a self-consistent real-space tight-binding method. Our results show that a Rh core in a geometry having a large surface/volume ratio and with Co–Rh mixing at the interface is the most likely chemical arrangement. A local analysis reveals that the orbital and spin moments at the Co–Rh interface are largely responsible for the increase of the magnetic moments and magnetic anisotropy. Moreover, the local moments induced at the Rh atoms, which amount to about 20% of the moment per Co atom [ μ_Rh = (0.2–0.3) μ_B] and the orbital moments of Co atoms play a crucial role on the interpretation of experiment. The results are discussed in the context of the interplay between chemical order and magnetic properties.     

Electronic structure and magnetism in (CoPt)n(n⩽5) clusters

The geometrical and magnetic properties of bimetallic clusters (CoPt)_n(1?n?5) have been studied by using the generalized gradient correction spin density formalisms. In general, the ground state structures of (CoPt)_n clusters are the three-dimension structures. We found that both the binding energy and magnetism per (CoPt) unit are increasing consistently with the size of the Co–Pt cluster (n). However, as the n increases, the magnetism shows a trace of convergence while the binding energy shows a linearly increasing pattern. Generally, Co average magnetic moment is enhanced when alloyed with Pt atoms than that in pure Co clusters.     

Enhanced orbital magnetism in Fe(50)Pt(50) nanoparticles

X-ray absorption and magnetic circular dichroism spectra at both the Fe and Pt L(3,2) edges were measured on wet-chemically synthesized monodisperse Fe(50)Pt(50) particles with a mean diameter of 6.3 nm before and after complete removal of the organic ligands and the oxide shell covering the particles by soft hydrogen plasma resulting in a pure metallic state. After thermal treatment of the metallic particles, the coercive field increased by a factor of 6, the orbital magnetic moment at the Fe site increased by 330% and is reduced at the Pt site by 30%, while the effective spin moments did not change. A decrease of the frequency of oscillations in the extended x-ray absorption fine structure at the Pt L(3,2) edges provides evidence for crystallographic changes towards the L1(0) phase.     

First-principles study of structural, electronic and magnetic properties in Cd1−xFexS diluted magnetic semiconductors

In this paper, we report theoretical investigations of structural, electronic and magnetic properties of ordered dilute ferromagnetic semiconductors Cd_1−xFe_xS with x=0.25, 0.5 and 0.75 in zinc blende (B3) phase using all-electron full-potential linear muffin tin orbital (FP-LMTO) calculations within the density functional theory and the generalized gradient approximation. The analysis of band structures, density of states, total energy, exchange interactions and magnetic moments reveals that both the alloys may exhibit a half-metallic ferromagnetism character. The value of calculated magnetic moment per Fe impurity atom is found to be 4 μ_B. Moreover, we found that p-d hybridization reduces the local magnetic moment of Fe from its free space charge value of 4 μ_B and produces small local magnetic moments on Cd and S sites.     

Perpendicular magnetic anisotropy of ultrathin FeCo alloy films on Pd(0 0 1) surface: First principles study

Using the full potential linearized augmented plane wave (FLAPW) method, thickness dependent magnetic anisotropy of ultrathin FeCo alloy films in the range of 1 monolayer (ML) to 5 ML coverage on Pd(0 0 1) surface has been explored. We have found that the FeCo alloy films have close to half metallic state and well-known surface enhancement in thin film magnetism is observed in Fe atom, whereas the Co has rather stable magnetic moment. However, the largest magnetic moment in Fe and Co is found at 1 ML thickness. Interestingly, it has been observed that the interface magnetic moments of Fe and Co are almost the same as those of surface elements. The similar trend exists in orbital magnetic moment. This indicates that the strong hybridization between interface FeCo alloy and Pd gives rise to the large magnetic moment. Theoretically calculated magnetic anisotropy shows that the 1 ML FeCo alloy has in-plane magnetization, but the spin reorientation transition (SRT) from in-plane to perpendicular magnetization is observed above 2 ML thickness with huge magnetic anisotropy energy. The maximum magnetic anisotropy energy for perpendicular magnetization is as large as 0.3 meV/atom at 3 ML film thickness with saturation magnetization of . Besides, the calculated X-ray magnetic circular dichroism (XMCD) has been presented.     

Strong anisotropy of projected 3d moments in epitaxial CrO2 films

Soft x-ray magnetic circular dichroism (XMCD) spectra have been investigated for different crystallographic projections of CrO2. Strong anisotropic orbital Cr 3d contributions and a change of sign of the XMCD signal is observed and attributed to t(2g) majority states near the Fermi level. Additionally, moment analysis exhibits anisotropic behavior in the projected spin contributions of CrO2 assigned to a strong magnetic dipole term T(z), consistent with an intrinsic magnetic easy axis behavior along the CrO2 [001] axis. A reduced projected isotropic Cr 3d spin moment has been interpreted in terms of hybridization with oxygen.     

First principles studies of Fe/Co superlattices and multilayers with bcc (0 0 1) and (1 1 0) orientations

The layer resolved magnetic moments and magnetic anisotropy energy of Fe/Co superlattices and multilayers with bcc (0 0 1) and (1 1 0) orientations obtained from first principles simulations are reported here. The magnetic moment of Fe atoms are found to depend on the geometry, coordination number and proximity to Co atoms, whereas that of Co remains almost constant in the superlattices and multilayers. Mixing of atoms at the interface resulted in enhanced Fe magnetic moment while that of Co is unaffected. The magnetic anisotropy energy in superlattices and multilayers are found to be larger than the corresponding values of bulk counterparts. Calculated easy axis of magnetization is in the plane for all superlattice compositions considered in the study, while that in multilayers, changes with crystalline orientation and thickness of Co layers.     

Magnetic properties of iron adatoms and small iron clusters on Ag(1 0 0)

A Green's function embedding technique based on the fully relativistic spin-polarized Screened Korringa–Kohn–Rostoker method is used to calculate the electronic and magnetic properties of magnetic nanostructures. Strongly enhanced spin and orbital moments are obtained for an Fe adatom and for small clusters of Fe on a Ag(1 0 0) surface. As a consequence, for an Fe adatom a magnetic anisotropy energy is found that is about 10 times larger than for an Fe monolayer. Furthermore, the exchange coupling energy between two Fe adatoms is calculated in terms of the force theorem, showing a very rapid decay with increasing distance.     

The effect of thickness and annealing condition on the microstructure and magnetic properties of Fe/Pt multilayer thin films

[Fe(0.5 nm)/Pt(0.5 nm)]₄₀, [Fe(1 nm)/Pt(1.5 nm)]₂₀ and [Fe(3 nm)/Pt(3 nm)]₁₀ multilayer were prepared by DC magnetron sputtering. By conventional furnace annealing (CA) at 270–600 °C for various time, all of the films still remained the disordered structure with the soft magnetic phase. By rapid thermal annealing (RTA) at 500 °C for various time, we obtained the [Fe(1 nm)/Pt(1.5 nm)]₂₀ and [Fe(3 nm)/Pt(3 nm)]₁₀ films with L1₂ ordered FePt₃ phase which was almost ferromagnetic at room temperature. However, the [Fe(0.5 nm)/Pt(0.5 nm)]₄₀ films was still disordered state even under RTA. Compared with CA, RTA exposed an outstanding effect on accelerating the phase transition when the film thickness is over [Fe(0.5 nm)/Pt(0.5 nm)]₄₀.     

Synchrotron radiation studies of mass-selected Fe nanoclusters deposited in situ

A portable UHV-compatible gas aggregation cluster source, capable of depositing clean mass-selected nanoclusters in situ, has been used at synchrotron radiation facilities to study the magnetic behaviour of exposed and Co-coated Fe clusters in the size range 250 to 540 atoms. X-ray magnetic circular dichroism (XMCD) studies of isolated and exposed 250-atom clusters show a 10% enhancement in the spin magnetic moment and a 75% enhancement in the orbital magnetic moment relative to bulk Fe. The spin moment monotonically approaches the bulk value with increasing cluster size but the orbital moment does not measurably decay till the cluster size is above ∼ 400 atoms. The total magnetic moments for the supported particles though higher than the bulk value are less than those measured in free clusters. Coating the deposited particles with Co in situ increases the spin moment by a further 10% producing a total moment per atom close to the free cluster value. At low coverages the deposited clusters are super-paramagnetic at temperatures above 10 K but a magnetic remanence at higher temperature emerges as the cluster density increases and for cluster films with a thickness greater than 50 ?(i.e. 2-3 layers of clusters) the remanence becomes greater than that of an Fe film of the same thickness produced by a conventional deposition source. Thick cluster-assembled film show a strong in-plane anisotropy. Received 14 December 2000