O2分子吸附的金属表面的O2(1Δg)猝灭

建立了一套流动装置测量单重态氧O₂(¹Δ_g)在O₂分子吸附的金属Cu、Cr、Ni和Ag表面的猝灭几率. 随实验时间和O₂(¹Δ_g)浓度增加,猝灭几率增加. 当上述金属样品在几帕斯卡的真空度下暴露数小时后猝灭几率会回到原先水平. 提出了一种基于表面吸附位上弱化学吸附的表面吸附氧分子O₂(¹∑_{g相似文献}   

丰中子核125Sb的高自旋态

利用在束γ谱学方法,通过¹²⁴Sn(⁷Li,α2n)反应首次研究了丰中子核¹²⁵Sb的高自旋态.建立了自旋达23/2⁺、激发能至2637keV的能级纲图,其中包括21条新γ跃迁和14个新能级.在1970,2110和2471keV识别出了3个同质异能态,估计了它们的寿命范围,并建议分别具有πg_7/2ν(h_11/2s_1/2),πg_7/2ν(h_11/2d_3/2),πg_7/2ν(h²_11/2)三准粒子组态.根据价质子与¹²⁴Sn核芯激发态的耦合讨论了¹²⁵Sb的能级结构.     

2+1维U(1)格点胶球质量的变分计算

本文对具有严格基态解和正确经典连续极限的格点规范哈密顿量,采用变分法,计算了2+1维U(1)规范群0^+－和0⁺⁺胶子态的质量,在深度弱耦合区,得到am(0^+－)随1/g²增大而指数减少,而am(0⁺⁺)=2.78g².     

弹性共振散射反应的厚靶实验设计

为了开展次级束引起的弹性共振散射反应的厚靶实验, 在北京HI-13串列加速器的次级放射性核束装置上建立了一套包含飞行时间和大面积双面硅微条探测器的探测系统, 并用57.0MeV ¹⁷F次级束轰击7.66mg/cm²的(CH₂)_n靶对¹⁷F+p弹性共振散射反应进行了试测量.     

弱形变双奇核158Tm中的旋称反转

通过融合蒸发反应¹⁴⁴Nd(¹⁹F,5n)布居了双奇核¹⁵⁸Tm的高自旋态. 扩展了原来已知的带结构, 并建立了一条新转动带. 通过与相邻核的比较, 讨论¹⁵⁸Tm核中两条四准粒子带的内禀组态, 并分别指定为πh_11/2\otimes νh_9/2(α=+1/2)\otimes (νi_13/2)²和πh_11/2\otimes νh_9/2(α=－1/2)\otimes (νi_13/2)² 组态. 建立在πh_11/2\otimes νi_13/2组态上的转动带被观测到呈现持续旋称反转现象, 而前述的两条高自旋区的 四准粒子转动带也呈旋称反转. 对这两种类型的旋称反转现象的可能机制进行了简单而定性的讨论.     

脉冲软X光辐射三种材料的喷射冲量实验研究

 在强光一号脉冲加速器上进行了国内首次的实验室软X光辐射三种材料的喷射冲量研究。结果表明，在能量为(0.2～0.33)keV、平均脉宽为39ns左右的X光辐射下，对灰漆、白漆和硬铝，在能注量分别为(92～152)J/cm²、(115～136)J/cm²和(163～192)J/cm²时，它们的冲量耦合系数分别为(0.61～0.80)Pa·s/(J·cm^-2)、(0.58～0.97)Pa·s/(J·cm^-2)和(0.61～0.84)Pa·s/(J·cm^-2)。     

2+1维SU(3)群格点规范的胶球质量

本文对具有严格基态解的Hamiltonian,采用采用变分法,计算了2+1维SU(3)规范群的C=+1.C=－1胶球质量.得到在0<1/g²≤6范围内,标度行为是am₊=36.1g²、am_－=5.98g².     

Ag-Cu纳米颗粒修饰的N掺杂TiO2纳米棒阵列及其高效光催化CO2还原应用

本文采用微纳加工方法制备了负载高密度Ag-Cu纳米颗粒的N掺杂TiO₂纳米棒阵列样品. 通过TiO₂的N掺杂,可将其吸光范围调控至与Ag纳米颗粒的等离激元吸收频率相匹配的波段,从而实现复合材料中肖特基结与共振能量转移过程的协同作用. 与此同时,Cu纳米颗粒可以为CO₂还原提供活性位点. 在全谱光照射下,复合样品光催化CO₂还原的活性显著提高,CH₄生成速率可达720 μmol·g^-1·h^-1.     

125Ba高自旋态的测量

通过¹⁰⁹Ag(¹⁹F,3n)核反应布局了¹²⁵Ba核的激发态.使用带BGO康普顿抑制的高纯锗探测器阵列和常规在束γ实验技术,测量了它的高自旋态.建立在h_11/2中子支壳上的负宇称带和建立在g_7/2中子支壳上的正宇称带分别被延伸到了35/2^－和23/2⁺态.负宇称带显示出明显的正负Signature劈裂,而正宇称带则几乎没有这种劈裂.负宇称正负Signature带均出现反弯,其反弯处转动频率与¹²⁴Ba晕带反弯频率相近.正宇称带出开始出现反弯迹象.     

用于质子和伽马射线探测的金刚石薄膜探测器的辐照性能

 研制出CVD金刚石薄膜探测器,在国家串列加速器和⁶⁰Co稳态辐射源上分别完成了该探测器对9 MeV质子束流和1.25 MeV γ射线的辐照性能研究。结果表明:该探测器在9 MeV质子照射累积强度达到10¹³ cm^-2时,探测器信号电荷收集效率减小量低于3.5%,辐照前后探测器暗电流没有明显变化。计算得到9 MeV质子对该探测器的损伤系数为1.3×10^-16 μm^-1·cm²。由于γ射线与金刚石作用产生的电子起到了填补缺陷的作用,探测器信号电荷收集效率随γ射线照射剂量的增加略有增加,在γ射线累积照射量达到10.32 C/kg时,其增幅小于0.7%。说明金刚石薄膜探测器具有较高耐辐照强度,适用于高强度辐射测量领域。     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.