Development of high sensitivity ethanol gas sensor based on Co-doped SnO2 nanoparticles by microwave irradiation technique

We have successfully synthesized Co doped SnO₂ nanoparticles by a simple microwave irradiation technique. Powder X-ray diffraction results reveal that the SnO₂ doped with cobalt concentration from 0 to 5 wt % crystallizes in tetragonal rutile-type structure. The products were annealed at 600 °C for 5 h in ambient atmosphere in order to improve crystallinity and structural perfection. Transmission electron microscopy (TEM) studies illustrate that both the undoped and Co doped SnO₂ crystallites form in spherical shapes with an average diameter of 30–15 nm, which is in good agreement with the average crystallite sizes calculated by Scherrer's formula. A considerable red shift in the absorbing band edge was observed with increasing of Co content (0–5 wt %) by using UV–Vis diffuse reflectance spectroscopy (DRS). Oxygen-vacancies, tin interstitial and structural defects were analyzed using photoluminescence (PL) spectroscopy. Electron paramagnetic resonance (EPR) spectroscopic studies clearly showed that the Co²⁺ was incorporated into the SnO₂ host lattice. Ethanol gas sensitivity of pure and Co-doped (5 wt %) SnO₂ nanoparticles were experimented at ambient temperature using optical fiber based on clad-modified method. By modifying the clad exposure to ethanol vapor, the sensitivities were estimated to be 18 and 30 counts/100 ppm for undoped and Co-doped SnO₂ nanoparticles, respectively. These results show that the Co doping into SnO₂ enhances its ethanol gas sensitivity significantly.     

Evaluation of cerium doped tin oxide nanoparticles as a sensitive sensor for selective detection and extraction of cobalt

Chemo-sensor technology demands to design a single, preconcentrator based sensing system having higher sensitivity, sufficient selectivity and efficient removal of metal ions with simple operating and recognition methodology. Here we effectively deliberated Ce doped SnO₂ nanoparticles based sensing system which can be exploited for the recognition and extraction of Co(II) ions in a single step by strong interaction between Ce doped SnO₂ nanoparticles and Co(II). The sensing ability of Ce doped SnO₂ nanoparticles were deliberated for a selective removal of cobalt using inductively coupled plasma-optical emission spectrometry. The sensing ability of Ce doped SnO₂ is studied for various metal ions, such as Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ni(II) and Zn(II) but the designed sensor was most selective toward Co(II) which was 5000 time more sensitive to Co(II) rather than different interfering metal ions. In addition, the desorption study for regeneration of Ce doped SnO₂ nanoparticles was carried out. This novel approach provides a new route for simultaneous detection and removal of Co(II) in a single step and can be a time and cost alternative tool for environmental safety.     

Structural,magnetic and XPS studies of Sn0.95Co0.05O2-0.05 and Sn0.95Fe0.05O2-0.05 nanoparticles

Structural, microstructural, X-ray photoemission spectra (XPS) and magnetic properties of transition metal ion [5 mol% of Co (SC5) and Fe (SF5)]-doped SnO₂ nanoparticles have been studied. The SC5 and SF5 nanoparticles were synthesized by a chemical route using polyvinyl alcohol as surfactant. The doped SnO₂ crystallites were found to exhibit a tetragonal rutile structure and the average grains size was measured by the Scherer relation of X-ray diffraction. Transmission electron micrographs showed that the average grain size of SC5 is smaller than SF5. SC5 nanoparticles showed strong ferromagnetic behaviour but SF5 exhibited an F-centre exchange (FCE) mechanism. Temperature-dependent magnetization showed the values of phase transition temperature. XPS confirmed the presence of Sn–O–Co and Sn–O–Fe bonds in these SC5 and SF5 nanoparticles. The oxidation states of Sn, Co and Fe were found to be +4, +2 and +2, respectively, while the core level XPS peaks of Sn 3d, O 1s, Co 2p and Fe 2p were analyzed.     

The effect of surfactants on the magnetic and optical properties of Co-doped SnO2 nanoparticles

A series of Co-doped SnO₂ nanoparticles have been synthesized by the co-precipitation route. Different amounts of surfactant have been used in order to study the effect of surfactants (CTAB) on the magnetic and optical properties. Structural analyses reveal that Co dopants are substituted into rutile SnO₂ nanoparticles without forming any secondary phase. The increase of the surfactant promotes the adsorption of organic molecules on the surfaces of nanoparticles. Meanwhile, both the ferromagnetism and the orange emission drop progressively. The dependence of ferromagnetic properties on the surfactant concentration could be explained based on the bound magnetic polaron, where the carriers are provided by oxygen vacancies. XANES spectra reveal that the electrons transfer from Co 3d bands to the surfactant ions. Such electron-transfer process suppresses the formation of oxygen vacancies and leads to the decline of the ferromagnetism and optical emission.     

Gd-doped SnO2 nanoparticles: Structure and magnetism

Gd-doped SnO₂ nanoparticles were chemically prepared doping 0-12.5% Gd into SnO₂ and calcined at 600 °C. X-ray diffraction and Fourier transformed infrared spectroscopy measurements show the formation of single phase of Sn_1−xGd_xO₂ up to x=0.0625 while at x=0.125, an additional secondary phase of tetragonal GdO₂ (not cubic Gd₂O₃) is detected. The transmission electron microscopy studies show that the individual particles are single crystalline with an average size in the range of 10-12 nm. Magnetization measurements show the absence of ferromagnetic and antiferromagnetic ordering in all samples; however surface spin effects and enhanced Gd-O-Gd interactions are proposed to account for the observed magnetic properties of the samples.     

Effect of Er3+ doping in SnO2 semiconductor nanoparticles synthesized by solgel technique

Pure and Er³⁺ doped SnO₂ semiconductor nanoparticles have been synthesized by solgel technique. The X-ray diffraction patterns show peaks corresponding to tetragonal structure of SnO₂. No Er related impurity peaks could be observed. From the TEM micrographs average crystallite size was estimated to be 12 nm. The UV–visible absorption spectra of SnO₂:Er showed blue shift in the absorption shoulder compared with the spectra of undoped SnO₂ sample. Photoluminescence emission intensity of SnO₂:Er nanoparticles was found to be quenched with increasing concentration of Er³⁺ ions. The electron spin resonance (ESR) analysis of Er doped SnO₂ nanoparticles indicated Er in 3 + state with g = 2.     

The role of the dopant in the magnetism of Fe-doped SnO2 films

Transparent pure and Fe-doped SnO₂ thin films were grown by pulsed laser deposition technique on LaAlO₃ substrates. X-ray diffraction shows that the films are polycrystalline and have the rutile structure. Surprisingly, the pure film presents magnetic-like behavior at room temperature with a saturated magnetization of almost one-third of the doped film (∼3.6 and 11.3 emu/g, respectively) and its magnetization could not be attributed to any impurity phase. Taking into account the magnetic moment measured in the pure film, the effective contribution of the impurity in the doped one can be inferred to be ∼2 μ_B per Fe atom. A large magnetic moment was also predicted by an ab initio calculation in the doped system, which increases if an oxygen vacancy is present near the Fe impurity.     

Fe doping induced enhancement in room temperature ferromagnetism and selective cytotoxicity of CeO2 nanoparticles

In the present study, structural, optical, magnetic properties as well as cytotoxicity of undoped and Fe doped Ceria (CeO₂) nanoparticles synthesized by simple soft chemical method have been reported. SEM and XRD results have shown that the synthesized samples are comprised of ultrafine spherical nanoparticles having single phase cubic fluorite structure of CeO₂. Raman spectroscopy results have depicted a red shift in F_2g mode with Fe doping which reveals enhancement in the oxygen vacancies. The optical band gap calculated from UV–visible absorption spectra has been found to vary unsystematically with Fe doping which is associated with the creation of impurity level and abundance in oxygen vacancies with Fe doping. The oxygen vacancies have introduced the room temperature ferromagnetism (RTFM) in undoped and Fe doped CeO₂ nanoparticles. The saturation magnetization (M_s) value of pristine CeO₂ nanoparticles has been found to be 0.00083 emu/g which is increased up to 0.0126 emu/g for 7% Fe doped nanoparticles. For cytotoxicity tests, the synthesized nanoparticles induced effects on Neuroblastoma cancer cells & HEK-293 healthy cells have been analyzed via CCK-8 analysis. It has been observed that the prepared undoped and Fe doped CeO₂ nanoparticles have nontoxic nature towards healthy cells while they are extremely toxic towards cancerous cells. Furthermore, the anticancer activity is found to enhance with Fe doping. The selective toxicity and enhancement in anticancer activity with Fe doping has observed to be strongly correlated with reactive oxygen species (ROS) generation.     

Effect of hydrogenation vs. re-heating on intrinsic magnetization of Co doped In2O3

Influence of Co doping for In in In₂O₃ matrix has been investigated to study the effect on magnetic vs. electronic properties. Rietveld refinement of X-ray diffraction patterns confirmed formation of single phase cubic bixbyite structure without any parasitic phase. Photoelectron spectroscopy and refinement results further revealed that dopant Co²⁺ ions are well incorporated at the In³⁺ sites in In₂O₃ lattice and also ruled out formation of cluster in the doped samples. Magnetization measurements infer that pure In₂O₃ is diamagnetic and turns to weak ferromagnetic upon Co doping. Hydrogenation further induces a huge ferromagnetism at 300 K that vanishes upon re-heating. Experimental findings confirm the induced ferromagnetism to be intrinsic, and the magnetic moments to be associated with the point defects (oxygen vacancies V_o) or bound magnetic polarons around the dopant ions.     

Structural,electrical and magnetic properties of (Fe,Co) co-doped SnO2 diluted magnetic semiconductor nanostructures

Nanostructures (NSs) of basic composition Sn_1−xFe_x/2Co_x/2O₂ with x=0.00, 0.04, 0.06, 0.08 and 0.1 were synthesized by citrate-gel route and characterized to understand their structural, electrical and magnetic properties. X-ray diffraction and Raman spectroscopy were used to confirm the formation of single phase rutile type tetragonal structure. The crystallite sizes calculated by using Williamson Hall were found to decrease with increasing doping level. In addition to the fundamental Raman peaks of rutile SnO₂, the other three weak Raman peaks at about 505, 537 and 688 cm⁻¹ were also observed. Field emission scanning electron microscopy studies showed the emergence of structural transformation. Electric properties such as dc electrical resistivity as a function of temperature and ac conductivity as a function of frequency were also studied. The variation of dielectric properties with frequency reveals that the dispersion is due to Maxwell–Wagner type of interfacial polarization in general. Hysteresis loops were clearly observed in M–H curves of Fe and Co co-doped SnO₂ NSs. However, pure SnO₂ nanoparticles (NPs) showed paramagnetic behaviour which vanished at higher values of magnetic field. The grain and grain boundary contribution in the conduction process is estimated through complex impedance plot fitted with non-linear least square (NLLS) approach which shows that the role of grain boundaries increases rapidly as compared to the grain volume with the increase of Fe and Co ions in to system.     

Structural studies of nanocrystalline SnO2 doped with antimony: XRD and Mössbauer spectroscopy

A series of Sb-doped SnO₂ samples, with doping levels 0, 3.1, 6.2, 11.9 and 14.0 at% Sb, has been hydrothermally prepared and characterized by X-ray powder diffraction. Diffraction lines were broadened, the line broadening being anisotropic. Both the line broadening and line anisotropy were dependent on the Sb doping level. The samples are tetragonal, space group P4₂/mnm and isostructural with TiO₂(rutile). Sb doping of SnO₂ causes the increase of unit-cell parameters. The structure of pure SnO₂ and of samples containing 6.2 and 11.9 at% Sb has been refined by the Rietveld method. Crystal structure indicated that both Sb³⁺ and Sb⁵⁺ are substituted for Sn⁴⁺ in the SnO₂ structure, Sb³⁺ being dominant for the investigated doped samples. The samples were also examined by ¹¹⁹Sn- and ¹²¹Sb-Mössbauer spectroscopy. Mössbauer spectroscopy confirmed the XRD results. Also, the values of the isomer shifts and quadrupole coupling constants indicated that the configuration around the Sb³⁺ site includes the presence of the stereochemically active lone pair electrons.     

Matrix embedded cobalt-carbon nano-cluster magnets: behavior as room temperature single domain magnets

A new type of Co-C nanoparticles is synthesized from CH₂Cl₂ solution of Co₄(CO)_{1 2} by heating up to 210 ^°C in a closed vessel. Transmission electron microscope (TEM) and electron energy loss spectroscopy (EELS) observation show that the particles are embedded in amorphous carbon and their average size is 12 nm. The radial structure function obtained from the extended X-ray absorption fine structure (EXAFS) of the Co K-edge absorption of the Co-C nanoparticles provides a Co-C average distance of 2.08 Å and the Co-Co distances of 3.18 Å and 3.9 (±0.2) Å. The particles exhibit the magnetic hysteresis curve with a coercive force of 200 Oe at 20 K and 260 Oe at 300 K. The temperature dependence of the magnetic susceptibility measured under zero-field cooling and 10 Oe field cooling conditions exhibits the behavior characteristic of a set of single magnetic domain nanomagnets in an amorphous carbon matrix.     

Influence of dopant level on structural, optical and magnetic properties of Co-doped anatase TiO2 nanoparticles

Cobalt-doped TiO₂ nanoparticles were synthesized by sol-gel method. The associated structural, optical, compositional and magnetic properties of the nanoparticles as a function of cobalt concentration have been systematically studied. The X-ray powder diffraction reveals that all samples have pure anatase phase tetragonal system and the lattice parameter analysis indicated that Co ions may substitute into the lattice of TiO₂. The average particle size is 15 nm, when found through transmission electron microscope. Optical spectroscopy measurement showed that the bandgap value decreases upon increasing Co concentration. The magnetic measurements revealed that the enhanced room temperature ferromagnetism (RTFM) strongly depends on the doping content.     

Optical investigation on sulfur-doping effects in titanium dioxide nanoparticles

The sulfur-doping (S-doping) effects in TiO₂ nanoparticles are investigated by means of Raman spectroscopy and UV–Vis spectroscopy with different S-doping levels (10 and 50%). Raman spectra indicate that the rutile and anatase phases dominate for the low S-doped (10%) and high S-doped (50%) TiO₂ nanoparticles, respectively. The variation of phase with different S-doping levels has been ascribed to the different S-doping processes into TiO₂ nanoparticles. In addition, an extra absorption band is observed in both the S-doped TiO₂ nanoparticles. With increasing S-doping level from 10 to 50%, the extra absorption band shows a blue-shift from 470 to 445 nm, which may be ascribed to the variation of phase from rutile to anatase for TiO₂.     

Effects of SnO2 addition on the microstructure and magnetic properties of NiZn ferrites

The microstructure and magnetic properties of SnO₂-doped NiZn ferrites prepared by a solid-state reaction method have been investigated. Due to its low melting point (∼1127 °C), moderate SnO₂ enhanced mass transfer and sintering by forming liquid phase, which accelerated the grain growth. However, excessive SnO₂ producing much of liquid phase retarded mass transfer and sintering, leading to a decrease in grain size. The diffraction intensity of the samples doped with SnO₂ addition was stronger than that of the sample without addition. The lattice constant initially decreased up to a content of 0.10 wt% and showed an increase at higher content up to 0.50 wt%. The initial permeability (μ_i) initially increased up to a content of 0.15 wt% and showed a decrease at higher content up to 0.50 wt%; however, losses (P_L) measured at 50 kHz and 150 mT changed contrarily. Both saturation induction (B_S) and Curie temperature (T_C) decreased gradually with increasing SnO₂. Finally, the sample doped with 0.10–0.15 wt% SnO₂ showed the higher permeability and lower losses.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Influence of Sb doping on crystal structure and electrical property of SnO2 nanoparticles prepared by chemical coprecipitation

Sb doped SnO₂ (ATO) nanoparticles with Sb doping concentrations ranging from 0% to 20% (Sb/Sb+Sn) have been prepared by chemical coprecipitation using metallic Sn and SbCl₃ as raw materials. The influence of Sb doping concentration on crystal structure and electrical property was studied in detail. Results indicated that all ATO nanoparticles possessed the same tetragonal rutile structure as that of bulk SnO₂. The average crystal size of the ATO nanoparticles decreased from 16 to 7 nm by increasing the Sb doping concentration. The unit-cell volume of ATO nanoparticles was either expanded or contracted, strongly depending on the Sb doping concentration. The electrical resistivity decreased sharply from 111 to minimum of 1.05 Ω cm when the Sb doping concentration was increased from 0% to 15% and then increased slightly to 1.42 Ω cm when the Sb doping concentration was increased from 15% to 20%. Finally, high resolution X-ray photoelectron spectroscopy (XPS) measurement was employed to investigate the valence state of Sb in samples with various Sb doping levels.     

W doped SnO2 growth via sol–gel routes and characterization: Nanocubes

The effects of W doping on the characteristical properties of SnO₂ thin films prepared by sol–gel spin coating method were investigated. The SnO₂ thin films were deposited at various W doping ratios and characterized by various measurements. XRD studies indicated that the undoped and W doped SnO₂ films had cubic and tetragonal phases. The SEM images of WTO thin films showed cubic shaped nanocubes corresponding to cubic phase and the smaller particles corresponding to tetragonal phase were formed on the film surfaces, and their distributions and sizes were dependent on the W doping ratio. EDX spectroscopy analyses showed that the calculated and participated atomic ratios of W/(W + Sn) (at.%) in the starting solution and in the WTO thin films were almost close. It was found that the sheet resistance depended on W doping ratio and 2.0 at.% W doped SnO₂ (WTO) exhibited lowest value of sheet resistance (7.11 × 10³ Ω/cm²).     

Effect of Mg doping on the electrical properties of SnO2 nanoparticles

Sol-gel derived Mg doped tin oxide (Sn_1−xMg_xO₂) nanocrystals were synthesized with x ranging between 0.5 and 7 at. %. Characteristic single phase tetragonal structure of pure and doped samples was obtained and doping saturation was inferred by X-ray diffraction analysis. Structural, morphological and phase informations were obtained by high resolution transmission electron microscope, field emission scanning electron microscope and X-ray photoelectron spectroscopy respectively whereas bonding information was obtained from Fourier transformed infrared spectroscopy. Measurement of different electrical parameters with frequency (200 Hz-10⁵ Hz) has been carried out at room temperature. Ultrahigh dielectric constant and metallic AC conductivity were observed for undoped tin oxide and the profiles reflected highly sensitive changes in the atomic and interfacial polarizability generated by doping concentrations. Relaxation spectra of tangent loss of any sample did not show any loss peak within the frequency range. Both the grain and grain boundary contributions are observed to increase as the doping concentration increased. Results of first principle calculation based on density functional theory indicated effective Fermi level (E_F) suppression due to Mg doping which is responsible for the experimentally observed conductivity variation. AC conductivity was found to depend strongly on the doping concentration and the defect chemistry of the compound. Mg doped SnO₂ may find applications as a low loss dielectric and high density energy storage material.     

Mössbauer and vibrational DOS studies of diluted magnetic tin oxides and nano iron oxides

The magnetic properties and Mössbauer results for SnO₂ doped with ⁵⁷Fe are reviewed, and the values of isomer shift and quadrupole splitting are compared with the results obtained by ab initio calculations. It is concluded that the exchange interactions between oxygen defects and magnetic atoms are responsible for long range magnetic interactions of dilute Fe ions dispersed in SnO₂. Fe atom precipitated clusters may be formed in highly Fe doped SnO₂ samples by annealing at relatively high temperatures for several hours. The reduction of the particle size to nano-scale dimensions induces magnetization, which can be associated with oxygen defects. We have measured the nuclear inelastic scattering (NIS) spectra of Fe oxides, and ⁵⁷Fe and (Co or Mn) doped SnO₂ synthesized mainly by sol–gel methods and we have derived the vibration density of states (VDOS). The local phonons are sensitive to the presence of precipitated clusters.