Microwave synthesis and thermal properties of polyacrylate derivatives containing itaconic anhydride moieties

ABSTRACT: BACKGROUND: Microwave irradiation as an alternative heat source is now a well-known method in synthetic chemistry. Microwave heating has emerged as a powerful technique to promote a variety of chemical reactions, offering reduced pollution, low cost and offer high yields together with simplicity in processing and handling. On the other hand, copolymers containing both hydrophilic and hydrophobic segments are drawing considerable attention because of their possible use in biological systems. Various copolymer compositions can produce a very large number of different arrangements, producing materials of varying chemical and physical properties. Thus, the hydrophilicity of copolymers can be modified by changing the amount of incorporated itaconic anhydride. RESULTS: A series of methyl methacrylate (MMA) and acrylamide (AA) copolymers containing itaconic anhydride (ITA) were synthesized by microwave irradiation employing a multimode reactor (Synthos 3000 Aton Paar, GmbH, 1400 W maximum magnetron) as well as conventional method. The thermal properties of the copolymers were evaluated by different techniques. Structure-thermal property correlation based on changing the itaconic anhydride ratio was demonstrated. Results revealed that the incorporation of itaconic anhydride into the polymeric backbone of all series affect the thermal stability of copolymers. In addition, the use of the microwave method offers high molecular weight copolymers which lead eventually to an increase in thermal stability. CONCLUSIONS: Microwave irradiation method showed advantages for the produced copolymers compared to that prepared by conventional method, where it can offer a copolymer in short time, high yield, more pure compounds and more thermally stable copolymers, rather than conventional method. Also, microwave irradiation method gives higher molecular weight due to prevention of the chain transfer. Moreover, as the itaconic anhydride content increases the thermal stability and Tg increase due to the decrease in the crystallinity.     

A versatile single‐electron‐transfer mediated living radical polymerization route to galactoglucomannan graft‐copolymers with tunable hydrophilicity

Cu(0) mediated living radical polymerization was successfully applied to synthesize graft‐copolymers from the hemicellulose acetylated galactoglucomannan. Functionalizing the polysaccharide backbone with α‐bromo isobutyric acid gave rise to a macroinitiator for single‐electron‐transfer mediated living radical polymerization (SET‐LRP). This macroinitiator with a degree of substitution of 0.15 or 0.20 was used in the graft‐SET‐LRP of methyl methacrylate in dimethyl sulfoxide as well as N‐isopropyl acrylamide and acrylamide in water. Kinetic analyses confirm conversions of up to 73% and a controlled behavior of the SET‐LRP process providing high molecular weight hemicellulose‐based hybrid copolymers with a brush‐like architecture. Derived graft‐copolymers varied significantly in solubility properties, ranging from hydrophobic via temperature responsive water‐solubility to water‐soluble. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enthalpy of swelling of crosslinked copolymers of acrylic acid β-vinyloxyethylamide in water and ethanol

The thermodynamics of swelling of copolymers of acrylic acid β-vinyloxyethylamide with acrylamide and N-vinylpyrrolidone of various compositions in water and ethanol is investigated. It is established that the swelling of the copolymers in water is characterized by high negative enthalpy values and that the swelling in ethanol is an endothermic process. It is found experimentally that the hydrogels obtained experience contraction at elevated temperatures.     

部分水解法制备高分子量水溶性(丙烯酰胺/丙烯酸/2-丙烯酰胺-2-甲基丙磺酸)三元共聚物

系列的高分子量水溶性丙烯酰胺 /丙烯酸 /2 丙烯酰胺 2 甲基丙磺酸 (AM/AA/AMPS)三元共聚物(P3A)由相应的 (AM/AMPS)二元共聚物通过部分水解方法制得 .聚合物的结构和组成使用电位滴定和13 C NMR谱测定 ,得到的结果指出 ,在设定的试验条件下 ,水解过程中 ,高分子链上AMPS单元具有充分的稳定性 ,而丙烯酰胺基平稳地转变为丙烯酸 .在所有不同聚合物 (P2A)情况下 ,由于阴离子基团和OH-离子的静电相斥作用 ,酰胺基的水解反应均遵循自动减缓动力学的模式 ,同时 ,最后反应转化率趋向极限 ,AM剩余值位于 3 0mol%左右 ,另外对各种三元共聚物 (P3A)的溶液特性粘数和组成的关系亦作了详细的研究 .     

Synthesis of IONP's decorated graft copolymers and study of their magnetic force–induced wastewater treatment

Our work is focused on facile synthesis and modification of amylopectin‐grafted block copolymers by using reversible addition?fragmentation chain transfer (RAFT) polymerization technique. This technique yields polymers with controlled molecular weight and low polydispersity indexes and is feasible with a wide range of monomers. Five different grades of amylopectin‐grafted polymethacrylic acid and polyacrylamide block copolymers have been synthesized via RAFT, by varying the amount of acrylamide employing amylopectin‐based macro chain transfer agent. Graft copolymers have been upgraded as smart responsive graft copolymers, through the incorporation of iron oxide nanoparticles (IONPs) via condensation reaction. The polymeric materials have been extensively characterized by energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy, scanning electron microscopy, ultraviolet‐visible spectroscopy, gel permeation chromatography, transmission electron microscopy, thermogravimetric analysis, and X‐ray diffraction analysis. Normal and responsive graft copolymers have been studied for removal of model contaminant (kaolin), and responsive graft copolymers have been used to remove methylene blue dye (without using any adsorbent) from water by applying external magnetic field. The upgraded block copolymers have shown best performance in wastewater treatment.     

Unusual Kinetics in Aqueous Heterophase Polymerizations

The heterogeneous nature of aqueous heterophase polymerizations is the base for an easy route to unique block copolymers, for the development of new and more effective polymerization strategies, and the abilities to unique studies of radical polymerization kinetics. Thermo-sensitive double hydrophilic block copolymers and micro- or nano-gel particles of poly(N-isopropyl acrylamide) as thermo-responsible block and charged or uncharged hydrophilic polymers can easily be prepared if the polymerization of N-isopropyl acrylamide is started with the corresponding polymeric radicals. The application of extremely fast microwave heating allows the development of highly effective pulsed thermal polymerization strategies and the production of polymers with desired molecular weight distributions over wide ranges. 2,2′-azobisisobutyronitrile simultaneously initiates the polymerization in both the monomer and the aqueous phase and leads, even under surfactant-free conditions, to stable latex particles.     

Effect of synthesis conditions on molecular characteristics of acrylamide copolymers with acrylic acid,carriers of cationic biologically active substances

Methods of molecular hydrodynamics and optics were used to study properties of aqueous solutions of acrylamide copolymers with acrylic acid. Dependences of the molecular characteristics of the copolymers on their synthesis conditions were determined and conditions were found in which the process of radical copolymerization of acrylamide with acrylic acid yields water-soluble carboxyl-containing acrylamide copolymers with molecular masses not exceeding 4×10⁴ Da.     

Photocatalytic degradation of poly(acrylamide-co-acrylic acid)

Poly(acrylamide-co-acrylic acid) copolymers of different compositions were synthesized and characterized. The copolymers were statistical with a relatively high percentage of acrylamide units, as determined by (13)C NMR. Reactivity ratios calculated by the Finemann-Ross and Kelen-Tudos methods showed that the copolymers were random with a reactivity ratio of r AM = 3.76 and r AA = 0.28. The photolytic and photocatalytic degradation of the copolymers and the homopolymers was conducted in the presence of combustion-synthesized nano anatase titania. The degradation of the copolymer in the presence of combustion-synthesized titania was significantly higher than that observed in the presence of commercial titania, Degussa P-25. The degradation was modeled by using continuous distribution kinetics by following the time evolution of molecular weight distribution. The degradation follows a two step mechanism, wherein the rapid first step comprises the scission of weak acrylic acid units along the chain which is followed by the breakage of relatively strong acrylamide units. The rate constants for the weak and strong links follow a linear trend with the percentage of acrylic acid and acrylamide in the copolymer, respectively. This linear variation can be correlated with a similar trend observed for the activation energies obtained for the pyrolytic degradation of the polymers.     

Copolymers of 1-methylcyclopropene

1-Methylcyclopropene (MCP) copolymerizes rapidly with acrylic and vinyl monomers to form soluble, high molecular weight products containing enchained cyclopropane rings. The high electron availability in the cyclopropene double bond promotes one-to-one alternating copolymerization with sulfur dioxide, maleic anhydride, acrylic acid, acrylonitrile, dialkyl fumarates and acrylic esters. Nonalternating copolymers are obtained with vinyl chloride and vinyl acetate, and attempted copolymerization fails entirely with styrene, α-methylstyrene and isoprene. This pattern of copolymerization reactivity resembles that of highly compressed ethylene. Methylcyclopropene copolymers have high glass temperatures in spite of the small size of the MCP unit. The combination of high T_g and small size allows preparation of copolymers with high T_g having a wide range of ductilities and cohesive energy densities.     

羧酸型接枝共聚物的合成及其络合物做化学阀

用大单体技术合成了带规整聚苯乙烯支链的聚丙烯酸接枝共聚物 .研究了各种聚合条件包括温度、时间、单体浓度、大单体分子量及大单体与小单体的投料比等对接枝效率、共聚物分子量的影响 .纯化的共聚物表现出良好的乳化性质及高吸水率 ,在稀溶液中的行为如同聚电解质 .此接枝共聚物与含规整聚氧乙烯支链的聚丙烯酸乙酯络合生成的大分子间络合物膜呈现化学阀的作用 ,水通过它的渗透速率能通过调节pH加以可逆地控制 .     

Microwave-Assisted Synthesis of Poly(ε-caprolactone)-block-poly(ethylene glycol) and Poly(lactide)-block-poly(ethylene glycol)

Summary: This study reported the preparation and characterization of PCL-b-mPEG (poly(ε-caprolactone)-block-poly(ethylene glycol)) and PLL-b-mPEG (poly(L-lactide)-block-poly(ethylene glycol)) diblock copolymers by microwave heating and comparison of resulted products the ones with prepared by conventional heating. Diblock copolymers were synthesized successfully by the microwave-assisted ROP in the presence of stannous octoate (SnOct₂) as catalyst under nitrogen atmosphere in different monomer ratios. Structural and functional characterization of copolymers were performed by FTIR, ¹H-NMR and DSC. Molecular weight values were determined by GPC and also calculated from ¹H-NMR. According to the results, microwave irradiation allowed to obtain polymers with very narrow size distribution in very short reaction time. Similar polymers prepared by conventional heating were also synthesized for comparison. Molecular weight and conversion of polymers were increased by irradiation time. This change was continued until a certain time point after which no more increase was observed. It was concluded that microwave irradiation is a succesful method to obtain these diblock copolymers in very short reaction time and with a similar conversion obtained by conventional method.     

羧甲基纤维素系列高分子表面活性剂的嵌段结构对其形态和性能的影响

采用超声波辐照聚合的羧甲基纤维素 (CMC)系列高分子表面活性剂是由CMC嵌段和含有等长双亲性支链的嵌段构成的共聚物 ,研究结果表明 ,CMC链段保证了共聚物的增粘性能 ,双亲性嵌段提供了共聚物优良的表面活性 ;CMC增粘嵌段与表面活性嵌段作为共聚物的两个嵌段 ,各发挥其作用 ,得到既有增粘性能又有高表面活性的双亲性共聚物 .     

部分水解聚丙烯酰胺-羟乙基纤维素的水相pH响应性自组装

为考察无规共聚物在全水相环境中的自组装行为, 合成了结构类似于无规共聚物的低相对分子质量的部分水解聚丙烯酰胺(HPAM). 尝试改变水溶液pH值来诱导HPAM与羟乙基纤维素(HEC)发生自组装, 采用透射电子显微镜(TEM)观察到不同pH值时分别获得了100 nm的似正方体胶束, 200 nm×100 nm的类椭球胶束, 100 nm的串珠状胶束以及500 nm×300 nm×50 nm的半月形胶束等pH响应性核壳型聚合物胶束. 建立了金在胶束表面原位还原耦合TEM表征方法, 用于检测低衬度聚合物胶束的纳米细节; 配合电子探针X射线微区分析(EPMA)和扫描电子显微镜(SEM), 证实了半月形聚合物胶束的精致分级构造为亲水性内囊@疏水性连续囊壁@亲水性外壳的多泡囊泡, 并证实pH=0.9时多泡囊泡崩解为疏水性内核@亲水性外壳的10 nm类球体小胶束. 通过分析链节质子化状态的pH响应性, 结合zeta电位和吸光度测定结果, 阐释了不同pH值时组成聚合物胶束的核和壳的链段归属, 获得了全水相中HPAM自组装驱动力和形貌方面的全新知识.     

丙烯腈的悬浮聚合

<正> 适用于普通溶液纺丝加工成形的聚丙烯腈(PAN)的分子量一般在5—8万范围内,近年来发展起来的冻胶纺丝方法使得(?)>4.0×10~5的超高分子量PAN也可以纺丝成形,成为制备高强高模PAN纤缎的有效方法之一。随着PAN材料应用领域的开拓,合成超高分子量的PAN是一个首要解决的问题。     

Structural Effect and Composition of Anionic Copolymer on Protein Flocculation

Flocculation of lysozyme with anionic copolymers of acrylamide, acrylic acid, and sodium styrene sulfonate used as flocculants was performed in pursuit of high flocculation efficiency. Two major factors, pH and ionic strength, are used to investigate the relationship of the flocculation behavior of protein by copolymers and the functional group (–COOH, –NH₂, –SO₃H) compositions of these copolymers. The protein flocculation can be controlled by adjusting pH. In addition, the various copolymers exhibit differing effects on ionic strength induced protein flocculation. FT-Raman spectroscopy was applied to investigate the mechanism of interaction between protein and copolymer. An attempt was made to understand how the pH and ionic strength change the surface chemical characteristics of protein and copolymers, as well as the relationship between the structure of copolymer and the protein flocculation process.     

Effect of pH on the reactivity ratios in the copolymerization of acrylic acid and acrylamide

The content of acrylic acid and acrylamide in their copolymers can be controlled by changing pH. The reactivity ratio of acrylic acid decreases with increasing pH, while the reactivity ratio of acrylamide increases with increasing pH. At low pH values, acrylamide is present in its protonated form which causes its reactivity to be low whereas at high pH values the reactivity of acrylic acid is decreased owing to its dissociation. When the monomer and radical approach each other, the acrylate anion becomes the least reactive species because of its symmetrical charge distribution, like charge repulsion and barium ion screening effect. HMO calculations were performed for models of all monomers and polymer radicals involved in copolymerizations. The experimental results concerning the reactivity of acrylic acid and acrylamide in copolymerization and the observed reactivity ratios were discussed on the basis of HMO calculations and resonance and Coulomb electrostatic effects. The observed reactivity ratios were correlated with the calculated differences in resonance energies computed for the models of transition states involved in copolymerizations.     

Microwave Effects Due to Anionic or Cationic Initiators in Emulsion Polymerization Reactions

Summary: Emulsion polymerization reactions were performed under microwave irradiation and conventional heating using anionic or cationic initiators and surfactants. Microwave irradiation promoted higher reaction rates for both initiators and surfactants, in comparison with the conventional heating. The effect of high power microwave irradiation was studied using a method of cycles of heating and cooling, where rapid polymerization reactions were obtained. In the reactions with anionic initiator and surfactant, a decrease in the particle diameters was observed with microwave heating, and even smaller particles were obtained using high power microwave irradiation. Moreover, the decrease in the particle size was acompanied by an increase in the polymer molecular weight. On the other hand, these effects were not observed for reactions with cationic initiator and surfactant.     

Chromatographic determination of residual monomers in starch-g-polyacrylonitrile and starch-g-polyacrylate

Summary A reverse-phase HPLC method for simultaneous determination of acrylonitrile (AN), acrylamide (AM) and acrylic acid (AC) was developed. The residual monomer AC was quantified in several industrial polymers as well as grafted copolymers. Products of biodegradation of these copolymers were also identified.     

Simultaneous crosslinking and cationization of cotton cellulose by using dialdehyde and choline chloride: comparison between the pad-dry-cure and microwave irradiation process

Simultaneous crosslinking and cationization of cotton cellulose were carried out by using two dialdehydes, glyoxal (GO) and glutaraldehyde (GA), along with choline chloride (ChCl). Two heating methods, conventional pad-dry-cure (PDC) and microwave irradiation, were investigated and compared. The results revealed that two aldehyde molecules reacted very differently in the presence of ChCl under two different heating methods. GO reacted predominantly with the cellulose molecule, stimulating the crosslinking reaction and consequently resulting in high wrinkle recovery angle (WRA) values regardless of the heating process. Contrarily, GA favored the reaction with ChCl, allowing high K/S values with acid dye under microwave irradiation. The crosslinked and cationized cotton cellulose was only obtained by treatment with GA and ChCl under the PDC process, resulting in high WRA and K/S values. Characteristics of the treated fabrics were also evaluated by Fourier transform infrared analysis, thermogravimetric analysis, scanning electron microscopy, water of imbibition, and tensile strength test. Additionally, the treatments with GA and ChCl also provided high antimicrobial properties of the cotton celluloses; thereby most bacteria reductions of the specimens were close or equal to 99.9 %. Therefore, economically viable yet ecofriendly crosslinking and cationization of cotton cellulose could be made by treatment with GA and ChCl.     

Water soluble polymeric nanogels by xanthate-mediated radical crosslinking copolymerisation

Branched water-soluble copolymers were obtained by direct radical crosslinking copolymerisation of acrylic acid or acrylamide and N,N'-methylenebisacrylamide at high solid content in the presence of an O-ethylxanthate as a reversible chain transfer agent.