SiO_2表面包覆对Fe_3O_4磁性微球性能的影响

采用化学共沉淀法制备Fe3O4磁性纳米粒子;用柠檬酸钠进行表面修饰得到在水相中稳定分散的Fe3O4溶胶。以Fe3O4磁性纳米粒子为种子,用碱催化正硅酸四乙酯水解、缩合制备了粒径和磁性可控的核壳结构的Fe3O4@SiO2复合微球。通过FT-IR,XRD,TEM,VSM和古埃磁天平对Fe3O4@SiO2复合微球进行表征。研究了SiO2包覆对Fe3O4@SiO2复合微球性能的影响。     

正电性磁性氧化铁胶粒负载钯催化的Suzuki偶联反应

发展了一种超顺磁性Fe3O4纳米粒子负载Pd0的简易方法. 利用Fe3O4溶胶带正电荷的特性, 将负离子 通过静电作用吸附在Fe3O4胶体粒子表面( /Fe3O4), 以抗坏血酸(Vc)进一步还原即得到载有金属Pd团簇的Fe3O4胶体粒子(Pd0/Fe3O4). 该磁性载体负载的Pd催化剂对Suzuki反应表现出良好的催化活性, 且在反应后, 可方便地通过永久磁铁将催化剂从反应体系中分离出来, 进行循环使用. 试验表明, 该催化剂在循环使用五次后反应活性无明显下降. 进一步试验发现, 这种磁性纳米粒子负载的金属钯对一系列卤代芳烃的Suzuki偶联反应均表现出较优的催化活性.     

原子转移自由基聚合法制备表面聚合物接枝四氧化三铁纳米粒子

为制备表面具有柔性高分子链的磁性微球,采用化学共沉淀法制备了具有超顺磁性的Fe3O4纳米微球,用KH550对Fe3O4纳米微球进行化学改性得到表面氨基化的Fe3O4纳米微球,与2-溴代异丁酰溴反应后制得含有引发官能团的Fe3O4纳米微球,随后将含溴的Fe3O4纳米微球与小分子单体与之通过原子转移自由基聚合(ATRP)法共聚。测试结果表明聚合物链成功地接枝到了Fe3O4纳米微球表面。     

内含Fe_3O_4和金纳米粒子的碳化微球的制备及其催化性能

通过蒸馏-沉淀聚合制备了丙烯酸-二乙烯苯共聚物微球,经离子交换吸附Fe2+离子,然后通过空气中加热、氩气气氛中高温碳化得到了含Fe3O4纳米粒子的多孔磁性碳化微球。在水介质中多孔磁性碳化微球吸附氯金酸,然后还原得到内含金纳米粒子的磁性碳化微球。以硼氢化钠还原对硝基苯酚生成对氨基苯酚反应为例,研究了内含金纳米粒子的磁性碳化微球的催化作用。结果表明,内含金纳米粒子的磁性碳化微球对该反应有很好的催化作用。通过外磁场很容易将磁性微球从反应液相中分离出来,微球重复使用10次后其催化活性基本未变。     

Fe_3O_4/P(NaUA-St-BA)核-壳纳米磁性复合粒子的合成与表征

以表面包敷有反应型的表面活性剂NaUA(十一烯酸钠)的Fe3O4磁性胶体粒子为种子,运用无皂乳液聚合方法原位制备出Fe3O4P(NaUAStBA)核壳纳米磁性复合粒子.Fe3O4磁性胶体粒子的粒径为10nm左右.IR和TG结果分析表明,苯乙烯、丙烯酸酯和NaUA在Fe3O4粒子的表面发生了聚合反应,形成P(NaUAStBA);TEM和激光粒度分析仪测试结果显示,Fe3O4P(NaUAStBA)复合粒子具有核壳结构而且粒子分布均匀、平均粒径60nm;TG测试的结果表明,NaUA在Fe3O4粒子的包覆率为13.83%,P(NaUAStBA)共聚物的包覆率71.85%;振动样品磁强仪(VSM)测试的磁滞回线则表明由无皂乳液聚合得到的Fe3O4P(NaUAStBA)复合粒子具有超顺磁性,可避免磁性微球在磁场中的团聚.另外,合成的磁性胶乳可稳定存放数月.     

Fe304@C/Pt复合纳米粒子的原位合成及其催化性质的研究

采用水热方法分别合成了Fe304磁性内核以及Fe3O4@C粒子.并原位合成了Fe3O4@C/Pt复合纳米结构,采用SEM,TEM红外光谱,Raman光谱等手段进行了相关表征.研究了纯Pt纳米粒子以及Fe3O4@C/Pt复合纳米结构催化硼氢化钠(NaBH4)还原对硝基苯酚(4-NP)的反应活性,并利用外加磁场富集的方式对...     

1,1-二苯基乙烯存在下无皂乳液聚合制备磁性复合微球

报道了一种制备磁性复合微球的方法——DPE法.在自由基控制剂1,1-二苯基乙烯(DPE)存在条件下,甲基丙烯酸甲酯(MMA)与丙烯酸(AA)发生无皂乳液聚合,制备能与Fe3O4粒子相螯合的活性短链共聚物,加入Fe3O4粒子把短链共聚物引到其表面,引发其它单体继续在Fe3O4粒子表面聚合,制备磁性复合微球.研究了AA、DPE、引发剂及Fe3O4粒子加入量等对制备磁性复合微球的影响.并在此基础上,对优化后工艺制备的磁性复合微球进行了TEM、TGA及磁响应性表征.结果表明,利用该新的方法制备出了磁含量为20%、比饱和磁化强度为32.2emu/g、平均粒径为265nm且表面不含任何杂质的磁性复合微球.     

磁性Fe_2O_3/Au/Ag复合纳米粒子的制备及其富集作用研究

利用种子生长法制备了磁性Fe2O3/Au/Ag复合纳米粒子,采用UV-vis和SEM对其光学性质以及表面结构的变化进行了表征.通过调节硝酸银的用量,制备了一系列具有不同Ag壳层厚度和表面结构的双金属外壳纳米粒子.以苯硫酚(TP)为探针分子,研究了不同Ag壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性.结果表明其SERS活性与表面结构的改变有关,在同时出现Ag和Au光学性质的Fe2O3/Au/Ag复合纳米粒子表面可观察到最强的SERS效应,这与表面的针孔效应以及Ag和Au之间的耦合增强作用有关.考察了Fe2O3/Au/Ag复合纳米粒子的磁富集作用,并利用SERS原位监测磁富集溶液中低浓度TP的能力,研究结果表明通过磁富集可提高SERS检测限,并且Fe2O3/Au/Ag的磁富集能力较Fe2O3/Au弱,但前者SERS信号较强.     

Ag/PANI/Fe_2O_3复合纳米粒子的合成与催化性能

借助于PANI的还原性质,PANI/Fe2O3复合载体与AgNO3发生表面氧化还原反应,合成了Ag/PANI/Fe2O3复合纳米粒子。TEM和XRD结果表明,立方晶系纳米银的平均粒径10nm。FTIR结果表明,Ag与PANI及Fe2O3复合载体之间不存在化学键合作用,但由于PANI与Ag之间的电子相互作用,Ag/PANI/Fe2O3复合纳米粒子的FTIR吸收峰发生蓝移。Ag/PANI/Fe2O3复合纳米粒子对于间硝基苯磺酸钠的硼氢化钠还原反应表现出良好的催化活性,30min内间硝基苯磺酸钠的转化率达到86.77%。     

内部结构不对称磁性复合微球的制备及其影响因素探究

内部结构不对称复合微球是指无机粒子在复合微球内部呈现规律性、不对称分布的一类微球.采用细乳液聚合的方法一步合成了平均粒径0.8μm、磁含量为46.67%、比饱和磁化强度为23.20 emu/g的内部结构不对称PSt/Fe3O4磁性复合微球.详细考察了Fe3O4纳米粒子表面修饰剂含量、乳化剂、助乳化剂、超分散剂、细乳化时间等因素对于复合微球形貌的影响,探讨了内部结构不对称复合微球的形成机理.同时通过TEM(透射电子显微镜),FTIR(红外光谱),VSM(振动样品磁强计),TG(热失重分析)以及激光粒度仪等表征手段对微球内部形貌、磁化强度及粒径等进行了表征,确定Fe3O4纳米粒子表面性质是微球呈现内部结构不对称的决定性因素.     

Antioxidant action by gold-PAMAM dendrimer nanocomposites

Gold-dendrimer nanocomposites were prepared in the presence of poly(amidoamine) (PAMAM) dendrimer (generation 3, 3.5, 5, and 5.5) via reduction of HAuCl4 with sodium borohydride. The average particle size of the gold nanoparticles was independent of the dendrimer concentration, ranging between 3.0 and 4.3 nm in diameter. The catalytic activities of the gold-dendrimer nanocomposites upon elimination of hydroxyl radicals formed in an H2O2/FeSO4 system were examined using a spin-trapping method. The gold-dendrimer nanocomposites exhibited high catalytic activities which were hardly affected by the concentration and the generation of the dendrimer except PAMAM dendrimer 3.5. The highest activity for the gold-PAMAM dendrimer 3.5 nanocomposites was 85 times that of ascorbic acid.     

Preparation of PAMAM- and PPI-metal (silver, platinum, and palladium) nanocomposites and their catalytic activities for reduction of 4-nitrophenol

Dendrimer-metal (silver, platinum, and palladium) nanocomposites are prepared in aqueous solutions containing poly(amidoamine) (PAMAM) dendrimers with surface amino groups (generations 3, 4, and 5) or poly(propyleneimine) (PPI) dendrimers with surface amino groups (generations 2, 3, and 4). The particle sizes of the metal nanoparticles obtained are almost independent of the generation as well as the concentration of the dendrimer for both the PAMAM and the PPI dendrimers; the average sizes of silver, platinum, and palladium nanoparticles are 5.6-7.5, 1.2-1.6, and 1.6-2.0 nm, respectively. It is suggested that the dendrimer-metal nanocomposites are formed by adsorbing the dendrimers on the metal nanoparticles. Studies of the reduction reaction of 4-nitrophenol by these nanocomposites show that the rate constants are very similar between PAMAM and PPI dendrimer-silver nanocomposites, whereas the rate constants for the PPI dendrimer-platinum and -palladium nanocomposites are greater than those for the corresponding PAMAM dendrimer nanocomposites. In addition, it is found that the rate constants for the reduction of 4-nitrophenol involving all the dendrimer-metal nanocomposites decrease with an increase in the dendrimer concentrations, and the catalytic activity of dendrimer-palladium nanocomposites is highest.     

Polymer particles with dendrimer@SiO2-Ag hierarchical shell and their application in catalytic column

Polymer particles with dendrimer@SiO₂–Ag hierarchical shell were prepared, and their application in the catalytic column for the reduction of 4-nitrophenol (4-NP) was also investigated. The PS microspheres with the carboxyl group were used as the supports for the immobilization of dendrimer@SiO₂–Ag shell. The polyamidoamine (PAMAM) dendrimer was grafted on the surface of PS microsphere through repetitive Michael addition reaction of methyl acrylate (MA) and amidation of the obtained esters with a large excess of ethylenediamine (EDA) successively. The silver nanoparticles formed inside the PAMAM shell. Then, the silver nanoparticles, which were used as center of nucleation, were coated with SiO₂ shell through improved Stöber method. Moreover, the more silver nanoparticles were dispersed on the surface of SiO₂ shell. The contents of silver element were measured using inductively coupled plasma (ICP-MS). The obtained PS@PAMAM@SiO₂–Ag nanoparticles were packed in stainless steel column, which has been used effectively for the catalytic reduction of 4-NP. Under column pressures, the rigid SiO₂ shell plays a better role in immobilization of silver nanoparticles than the soft PAMAM shell. This technique for packing catalytic nanoparticles in column improves the efficiency of application with metal catalysts as well as reduces the tedious separation processes in catalytic reaction.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

EXAFS characterization of dendrimer-Pt nanocomposites used for the preparation of Pt/gamma-Al2O3 catalysts

Pt/gamma-Al2O3 catalysts were prepared using hydroxyl-terminated generation four (G4OH) PAMAM dendrimers as the templating agents and the various steps of the preparation process were monitored by extended X-ray absorption fine structure (EXAFS) spectroscopy. The EXAFS results indicate that, upon hydrolysis, chlorine ligands in the H(2)PtCl(6) and K(2)PtCl(4) precursors were partially replaced by aquo ligands to form [PtCl3(H2O)3]+ and [PtCl2(H2O)2] species, respectively. The results further suggest that, after interaction of such species with the dendrimer molecules, chlorine ligands from the first coordination shell of Pt were replaced by nitrogen atoms from the dendrimer interior, indicating that complexation took place. This process was accompanied by a substantial transfer of electron density from the dendrimer to platinum, indicating that the dendrimer plays the role of a ligand. Following treatment of the H(2)PtCl(6)/G4OH and K(2)PtCl(4)/G4OH complexes with NaBH4, no substantial changes were observed in the electronic or coordination environment of platinum, indicating that metal nanoparticles were not formed during this step under our experimental conditions. However, when the reduction treatment was performed with H2, the formation of extremely small platinum clusters, incorporating no more than four Pt atoms was observed. The nuclearity of these clusters depends on the length of the hydrogen treatment. These Pt species remained strongly bonded to the dendrimer. Formation of larger platinum nanoparticles, with an average diameter of approximately 10 A, was finally observed after the deposition and drying of the H(2)PtCl(6)/G4OH nanocomposites on a gamma-Al(2)O(3) surface, suggesting that the formation of such nanoparticles may be related to the collapse of the dendrimer structure. The platinum nanoparticles formed appear to have high mobility because subsequent thermal treatment in O2/H2, used to remove the dendrimer component, led to further sintering.     

Scavenging DPPH radicals catalyzed by binary noble metal-dendrimer nanocomposites

Catalytic activity of gold-platinum, gold-palladium, and platinum-palladium dendrimer nanocomposites for scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was investigated. The gold-platinum and gold-palladium dendrimer nanocomposites were prepared via simultaneous reduction by sodium borohydride in the presence of poly(amidoamine) (PAMAM) dendrimers with amine or carboxyl terminal groups. The particles were not mixtures of monometallic particles but alloyed bimetallic particles. Bimetallic particles exhibited higher catalytic activity than monometallic ones.     

荧光磁性双功能树状分子微球的制备与表征

采用化学共沉淀法, 以FeCl₃·6H₂O和FeSO₄·7H₂O为原料制备了磁性Fe₃O₄纳米颗粒, 采用树状大分子对其进行修饰, 然后通过树状大分子具有的大量空腔及末端丰富的氨基, 经吸附、 键合, 与大量巯基乙酸修饰的CdSe/CdS量子点连接, 得到三代具有荧光磁性双功能的树状分子微球, 并对其进行结构表征与性能测试. 结果表明: 三代复合后的微球的平均粒径分别为15, 34和49 nm; 一代荧光磁性微球的发光性能最佳, 其量子产率达24.1%; 零代荧光磁性微球磁性能最优, 其饱和磁化强度为15.96 A·m²/kg. 这种具有荧光和磁性的双功能纳米复合微粒有望在免疫检测、 靶向治疗、 荧光追踪和磁性分离等方面得到广泛应用.     

Comparison of PAMAM-Au and PPI-Au nanocomposites and their catalytic activity for reduction of 4-nitrophenol

Dendrimer-Au nanocomposites are prepared in aqueous solutions using poly(amidoammine)dendrimers (PAMAM) (generation 2, 3, and 5) and poly(propyleneimine)dendrimers (PPI)(generation 2, 3, and 4) by wet chemical NaBH(4) method. The Au nanoparticles thus obtained are 2-4 nm in diameter for both dendrimers and no generation dependence on the particle size is observed, whereas the generations of the dendrimers are increased as stabilization of Au-nanoparticles is achieved with lower dendrimer concentrations. Studies of the reduction reaction of 4-nitrophenol using these nanocomposites show that the rate constants for the PAMAM dendrimers (generations 2 and 3) are higher than those for the PPI dendrimers (generations 2 and 3), while a distinct difference in the rate constants is not seen for the PAMAM dendrimer (generation 5) or the PPI dendrimer (generation 4). In addition, the rate constants for the reduction of 4-nitrophenol involving all the dendrimers decrease with increases in dendrimer concentrations.